| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
genetlink: pin family module during policy dump
The generic netlink controller's policy dump keeps pointers to the target
family's operation and policy tables in its callback state. A dump may be
split across multiple skbs and remain pending after the initial request.
Netlink pins the module which owns the dump callback, but in this case
that is the controller's owner rather than the target family's owner. The
target family can consequently be unregistered and its module unloaded
while a policy dump is pending. Advancing the dump then dereferences
policy memory from the unloaded module.
Take a reference to the target family's module when the dump starts.
Drop it from the error and done paths. This matches the lifetime for which
the dump context retains the family and policy pointers. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btrtl: Don't leak return code when parsing firmware format v2
When key_id from chip is zero, rtlbt_parse_firmware_v2() intentionally
ignores all security headers. However, the implementation simply breaks
from a switch statement and leaks uninitialized return code `rc' (if the
first section is a security one) or the previous section's `rc'.
Fix it by really skipping a loop with `continue'. For consistency and
readability, also do the same for the default case. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/amd_node: Fix potential NULL pointer dereference
amd_smn_read/write() are exported functions around __amd_smn_rw(), so
they are always available even if amd_smn_init() fails. In that case,
'amd_roots' is NULL and __amd_smn_rw() will access uninitialized memory.
Then, commit:
83518453074d ("x86/amd_node: Add SMN offsets to exclusive region access")
added the 'smn_exclusive' flag, which indicated the calls to
pci_request_config_region_exclusive() succeeded, to prevent
concurrent userspace access.
Commit:
0a4b61d9c2e4 ("x86/amd_node: Fix AMD root device caching")
re-ordered initialization so pci_request_config_region_exclusive() is
called earlier and a failure exits amd_smn_init() before allocating
'amd_roots'. The setting of 'smn_exclusive' moved to the end of
amd_smn_init(), after 'amd_roots' is allocated. It became redundant
and can be removed.
Replace 'smn_exclusive' with directly checking 'amd_roots', to fix a
potential NULL pointer dereference and to simplify the logic.
[ bp: Reorg commit message, touchup comment. ]
[ mingo: Rebase & further touchups. ] |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix uninitialized return value in netfs_unbuffered_write()
If preparation of the first subrequest fails,
netfs_unbuffered_write() exits its loop before ret is initialized. The
empty-iterator check can do the same.
For synchronous writes, netfs_unbuffered_write_iter_locked() may then
return an unrelated error instead of wreq->error. This is reachable
through CIFS if cifs_prepare_write() fails to reopen the file or obtain
credits.
Initialize ret to 0 so the caller returns wreq->error if no data was
written, or the number of bytes already written otherwise.
Found with Clang's -Wconditional-uninitialized. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mpls: clear inner_protocol when the last label is popped
skb_mpls_push() records the pre-encapsulation network header once, gated
on !skb->inner_protocol. skb_mpls_pop() never clears that record, so it
outlives the encapsulation it describes.
Open vSwitch can then re-push MPLS onto a packet whose
inner_network_header still points at the older, deeper offset: push a
label, pop every label, recirculate (ovs_flow_key_update() re-derives
key->eth.type and resets network_header, but leaves inner_*), then push
again. ovs_fragment() trusts the record:
skb->network_header = skb->inner_network_header;
so skb_network_offset() goes negative. The bound check is signed:
if (skb_network_offset(skb) > MAX_L2_LEN)
a negative offset passes it, and prepare_frag() widens the value:
unsigned int hlen = skb_network_offset(skb);
memcpy(&data->l2_data, skb->data, hlen);
which is a ~4GiB memcpy out of a 30-byte per-CPU buffer.
Reproduced on v7.3-rc1. RDX is the truncated length, (unsigned int)(-8):
BUG: unable to handle page fault for address: ffffe8ffffc16000
#PF: supervisor write access in kernel mode
Oops: 0002 [#1] SMP KASAN NOPTI
RIP: 0010:memcpy+0x8/0x20
RDX: 00000000fffffff8 RSI: ffff888105d732db RDI: ffffe8ffffc16000
prepare_frag+0x3df/0x4e0
ovs_fragment+0x589/0x7e0
do_output+0x4ce/0x5e0
do_execute_actions+0x55d2/0x7b30
ovs_execute_actions+0xea/0x450
Same root-cause shape as commit 975b5b067f52 ("ipv6: sr: restore network
header before routing and forwarding"): a stale network header offset
reaching a consumer that widens it. Here it originates in the MPLS
push/pop path.
Clear inner_protocol once the packet is no longer MPLS, so a later push
re-records the current header. net/sched/act_mpls.c is the only other
skb_mpls_pop() caller and gets the same fix; sch_frag.c saves and
restores inner_protocol around fragmentation in the same way OVS does. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mana: Reserve extra CQ slot for the fence completion CQE
The RX completion queue is sized to hold exactly one CQE per posted RX WQE.
MANA_FENCE_RQ makes hardware post an additional CQE_RX_OBJECT_FENCE after
the packet CQEs. The current sizing reserves no extra slot for it and in
rare cases, CQ has no guaranteed slot for the fence CQE when it is full of
packet CQEs. This can lead to dropping the fence completion while the
driver waits holding RTNL lock throughout the timeout duration.
Reserve one extra CQE slot for CQE_RX_OBJECT_FENCE. mana_gd_alloc_memory()
requires queue_size to be a power-of-two and at least MANA_PAGE_SIZE;
the reservation pushes cq_size past a power-of-two, so round up the CQ size
in mana_create_rxq(). |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_api: release all action references on NEWACTION failure
When a batched RTM_NEWACTION request replaces an existing action,
tcf_idr_check_alloc() takes a temporary reference on it. If a later
action fails to initialize, tcf_action_destroy() uses strict release
semantics to clean up the actions initialized so far. For an action
bound to a filter, the strict check returns -EPERM without dropping
the temporary reference.
This error also makes tcf_action_destroy() return before releasing
subsequent entries. Any new action initialized between the bound
action and the failing entry is leaked together with its reserved
IDR slot, preventing reuse of its index.
Use tcf_idr_release() to drop each reference held by the batch without
rejecting bound actions. This allows cleanup to continue through all
initialized entries and preserves the module reference release when
an action is destroyed. Explicit action deletion and flushing retain
their separate bind-count checks. |
| In the Linux kernel, the following vulnerability has been resolved:
ring-buffer: Check resize_disabled before publishing the new subbuf order
ring_buffer_subbuf_order_set() stores the new order and only then walks
the CPUs, returning -EBUSY if any of them has resizing disabled. A user
mapped buffer has resizing disabled, and __rb_map_vma() reads
buffer->subbuf_order without buffer->mutex, so an mmap of an already
mapped CPU racing the failing order change sizes the mapping with the
new order and inserts pages past the sub-buffer into the VMA.
Check the CPUs before storing the new order. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Flush LSC untyped L1 dataport cache after rcs/ccs batches
emit_render_cache_flush() sets PIPE_CONTROL0_HDC_PIPELINE_FLUSH to
flush the L2/HDC data cache before fence signalling, but it never
requests a flush of the LSC untyped L1 data cache via the 'Untyped
Data-Port Cache Flush Enable' bit in PIPE_CONTROL DWord0[11].
Per the Bspec, in 3D pipeline mode HDC Pipeline Flush is documented to
also flush/invalidate the untyped L1 cache, but only depending on how
HDC_CHICKEN0[13:11] is programmed. Starting with MTL, this coupling
between HDC Pipeline Flush and the untyped L1 cache flush no longer
holds in practice, regardless of how HDC_CHICKEN0 is programmed, so
relying on it is not safe on newer platforms such as BMG. Mesa's Vulkan
driver (anv) has been assuming the kernel flushes both caches between
submissions, and hit user-visible corruption in apps such as Llama.cpp
because of this gap; it now works around it by flushing both caches
again from userspace at the end of every command buffer.
Correctness between submissions on the same queue is userspace's
responsibility and belongs in Mesa, not the kernel. However, for
security we must ensure stale data can't leak through the untyped L1
dataport cache once memory is reclaimed or evicted, which requires the
KMD to flush it before releasing memory for reuse.
Prior to MTL, HDC_CHICKEN0 could be programmed (as already done for
DG2 via Wa_22010960976/Wa_14013347512) to reliably keep HDC Pipeline
Flush coupled to the untyped L1 cache flush, so those platforms are
unaffected. Mesa's own anv driver found that on MTL the HW
disconnected the two independently of how HDC_CHICKEN0 is programmed,
and could not bring the old behavior back even by writing the register
by hand; see Mesa commit 7c2ff46a4fc3 ("anv: don't prevent L1 untyped
cache flush in 3D mode"). The kernel can't reliably request the flush
from the CS on MTL either, so restrict the new PIPE_CONTROL bit to
GRAPHICS_VERx100 >= 2000 (Xe2 and later), where it can be relied on.
Explicitly set PIPE_CONTROL0_UNTYPED_DATAPORT_CACHE_FLUSH together
with PIPE_CONTROL0_HDC_PIPELINE_FLUSH in emit_render_cache_flush() on
Xe2 and later, so the L1 data cache is known clean before memory is
released for reuse, without depending on undocumented
platform-specific HDC_CHICKEN0 behavior.
Bspec: 56551
(cherry picked from commit 434514b6fe731e873808297c268fc52cdf4a1ce6) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/rockchip: analogix_dp: fix unchecked bound endpoint name length
rockchip_dp_drm_encoder_enable() uses sprintf() to format a device tree
path into a 32-byte stack buffer. Device tree paths are not limited to
this size, so a sufficiently long path can overflow the buffer.
Use snprintf() with the destination size to truncate the generated name
and keep the writes within bounds. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/drm_exec: fix up contended obj when num_objects is 0
drm_exec_prepare_array() silently returns success without calling
drm_exec_lock_contended() when num_objects is zero. This breaks the
invariant upheld by drm_exec_lock_obj(), where every entry point into
the locking sequence must first attempt to lock any previously
contended object before proceeding.
Drivers that chain multiple drm_exec_prepare_array() calls per
drm_exec_until_all_locked() iteration (e.g. amdgpu's userq signal/wait
ioctls, which prepare separate read and write BO arrays) can pass an
empty array for one of the two calls. If contention is hit while
preparing the non-empty array, exec->contended is set and the loop
retries; on retry, the empty-array call preceding it is a no-op that
never clears exec->contended, so drm_exec_retry_on_contention()
immediately jumps back to the top of the loop without ever reaching
the call that would resolve the contention. This spins forever.
Fix it by having drm_exec_prepare_array() call drm_exec_lock_contended()
directly when num_objects is zero, so a pending contended object dont
loop infinitely. |
| NVIDIA GPU Display Driver for Windows and Linux contains a vulnerability in the kernel mode layer, where a user could cause an integer overflow leading to an out-of-bounds write to GPU memory. A successful exploit of this vulnerability might lead to code execution, denial of service, escalation of privileges, information disclosure, and data tampering. |
| MISP contains a reflected cross-site scripting (XSS) vulnerability in the analyst data notes panel. The seed path parameter, supplied by the user via the URL, was passed directly into inline JavaScript within the rendered HTML response without any sanitization or type enforcement.
An attacker who can convince an authenticated MISP user to navigate to a crafted URL (for example, via a phishing link) can inject arbitrary JavaScript that executes in the victim's browser context. This may allow the attacker to read session tokens, manipulate the page, or perform actions on behalf of the victim.
Preconditions:
- The victim must be authenticated to MISP and access the analyst data view for an attribute or object.
- The attacker must supply a malicious seed value in the URL path.
Impact:
- Execution of arbitrary JavaScript in the victim's browser session.
- Potential theft of session credentials or sensitive data visible in the page.
- Manipulation of the analyst data interface.
Affected: MISP versions prior to the fix (commit 58925dbf0, post v2.5.48). |
| MISP contains a reflected cross-site scripting (XSS) vulnerability in the legacy taxonomy tag management confirmation forms (add tag and disable tag).
The affected forms echoed a user-supplied tag name value from the request unescaped into the rendered HTML output. An attacker who can induce a site administrator to visit a crafted URL containing a malicious tag name parameter can execute arbitrary JavaScript in the administrator's browser session.
Preconditions:
- The target must be running a MISP instance with the legacy taxonomy tag confirmation views enabled.
- The victim must be an authenticated site administrator.
- The victim must navigate to the attacker-crafted URL (e.g., via a phishing link).
Security impact:
- Execution of arbitrary client-side script in the context of the administrator's browser.
- Potential theft of session tokens, CSRF tokens, or other sensitive data accessible from the page.
- Potential for performing privileged actions on behalf of the administrator within the MISP interface.
Affected versions: <2.5.48. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usbusx2y: validate URB actual_length in interrupt callback
i_usx2y_in04_int() processes the interrupt URB data without checking
urb->actual_length. A short transfer from a malfunctioning device
would cause the handler to process uninitialized heap data from the
kmalloc-allocated in04_buf, which is then copied to the mmap-accessible
ctl_snapshot[] array.
Fix by using kzalloc() for in04_buf to zero-initialize the buffer,
and adding an actual_length check to skip processing on short
transfers while still resubmitting the URB. |
| In the Linux kernel, the following vulnerability has been resolved:
configfs: unhash the dentry before dropping the item in rmdir
configfs_get_config_item() treats a hashed dentry as proof that
sd->s_element is a live config_item. configfs_rmdir() breaks that:
simple_rmdir() leaves the dentry hashed, the last reference to the item is
dropped right after, and the dentry is only unhashed by d_delete() once
->rmdir() has returned. configfs_symlink() resolves its target holding no
lock on it, so get_target() can land in that window:
BUG: KASAN: slab-use-after-free in config_item_get+0x26/0x90
get_target fs/configfs/symlink.c:128 [inline]
configfs_symlink+0x4ab/0x1030 fs/configfs/symlink.c:185
Unhash in configfs_remove_dir(), while the item is still guaranteed to be
there. A reference obtained just before that stays harmless, as
create_link() rechecks CONFIGFS_USET_DROPPING, already set by
configfs_detach_prep(). Both configfs_unregister_subsystem() paths
d_drop() after detaching, so this only makes rmdir match them. |
| NVIDIA GPU Display Driver for Windows and Linux contains a vulnerability in the kernel mode layer where an attacker could cause improper input validation. A successful exploit of this vulnerability might lead to code execution, denial of service, escalation of privileges, information disclosure, and data tampering. |
| NVIDIA GPU Display Driver for Windows and Linux contains a vulnerability in the kernel mode layer where an attacker could cause an improper validation of an array index. A successful exploit of this vulnerability might lead to code execution, denial of service, escalation of privileges, information disclosure, and data tampering. |
| NVIDIA GPU Display Driver for Windows and Linux contains a vulnerability in the firmware where an attacker could cause an out-of-bounds read. A successful exploit of this vulnerability might lead to code execution, denial of service, escalation of privileges, information disclosure, and data tampering. |
| colmux in collectl before 4.3.20.2 does not sanitize ANSI/VT100 terminal escape sequences in data received from remote collectl instances before displaying it, allowing a local user on a monitored host to inject escape sequences into the terminal of an operator running colmux, via a crafted process name (argv[0]). |
