In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Flush LSC untyped L1 dataport cache after rcs/ccs batches
emit_render_cache_flush() sets PIPE_CONTROL0_HDC_PIPELINE_FLUSH to
flush the L2/HDC data cache before fence signalling, but it never
requests a flush of the LSC untyped L1 data cache via the 'Untyped
Data-Port Cache Flush Enable' bit in PIPE_CONTROL DWord0[11].
Per the Bspec, in 3D pipeline mode HDC Pipeline Flush is documented to
also flush/invalidate the untyped L1 cache, but only depending on how
HDC_CHICKEN0[13:11] is programmed. Starting with MTL, this coupling
between HDC Pipeline Flush and the untyped L1 cache flush no longer
holds in practice, regardless of how HDC_CHICKEN0 is programmed, so
relying on it is not safe on newer platforms such as BMG. Mesa's Vulkan
driver (anv) has been assuming the kernel flushes both caches between
submissions, and hit user-visible corruption in apps such as Llama.cpp
because of this gap; it now works around it by flushing both caches
again from userspace at the end of every command buffer.
Correctness between submissions on the same queue is userspace's
responsibility and belongs in Mesa, not the kernel. However, for
security we must ensure stale data can't leak through the untyped L1
dataport cache once memory is reclaimed or evicted, which requires the
KMD to flush it before releasing memory for reuse.
Prior to MTL, HDC_CHICKEN0 could be programmed (as already done for
DG2 via Wa_22010960976/Wa_14013347512) to reliably keep HDC Pipeline
Flush coupled to the untyped L1 cache flush, so those platforms are
unaffected. Mesa's own anv driver found that on MTL the HW
disconnected the two independently of how HDC_CHICKEN0 is programmed,
and could not bring the old behavior back even by writing the register
by hand; see Mesa commit 7c2ff46a4fc3 ("anv: don't prevent L1 untyped
cache flush in 3D mode"). The kernel can't reliably request the flush
from the CS on MTL either, so restrict the new PIPE_CONTROL bit to
GRAPHICS_VERx100 >= 2000 (Xe2 and later), where it can be relied on.
Explicitly set PIPE_CONTROL0_UNTYPED_DATAPORT_CACHE_FLUSH together
with PIPE_CONTROL0_HDC_PIPELINE_FLUSH in emit_render_cache_flush() on
Xe2 and later, so the L1 data cache is known clean before memory is
released for reuse, without depending on undocumented
platform-specific HDC_CHICKEN0 behavior.
Bspec: 56551
(cherry picked from commit 434514b6fe731e873808297c268fc52cdf4a1ce6)
drm/xe: Flush LSC untyped L1 dataport cache after rcs/ccs batches
emit_render_cache_flush() sets PIPE_CONTROL0_HDC_PIPELINE_FLUSH to
flush the L2/HDC data cache before fence signalling, but it never
requests a flush of the LSC untyped L1 data cache via the 'Untyped
Data-Port Cache Flush Enable' bit in PIPE_CONTROL DWord0[11].
Per the Bspec, in 3D pipeline mode HDC Pipeline Flush is documented to
also flush/invalidate the untyped L1 cache, but only depending on how
HDC_CHICKEN0[13:11] is programmed. Starting with MTL, this coupling
between HDC Pipeline Flush and the untyped L1 cache flush no longer
holds in practice, regardless of how HDC_CHICKEN0 is programmed, so
relying on it is not safe on newer platforms such as BMG. Mesa's Vulkan
driver (anv) has been assuming the kernel flushes both caches between
submissions, and hit user-visible corruption in apps such as Llama.cpp
because of this gap; it now works around it by flushing both caches
again from userspace at the end of every command buffer.
Correctness between submissions on the same queue is userspace's
responsibility and belongs in Mesa, not the kernel. However, for
security we must ensure stale data can't leak through the untyped L1
dataport cache once memory is reclaimed or evicted, which requires the
KMD to flush it before releasing memory for reuse.
Prior to MTL, HDC_CHICKEN0 could be programmed (as already done for
DG2 via Wa_22010960976/Wa_14013347512) to reliably keep HDC Pipeline
Flush coupled to the untyped L1 cache flush, so those platforms are
unaffected. Mesa's own anv driver found that on MTL the HW
disconnected the two independently of how HDC_CHICKEN0 is programmed,
and could not bring the old behavior back even by writing the register
by hand; see Mesa commit 7c2ff46a4fc3 ("anv: don't prevent L1 untyped
cache flush in 3D mode"). The kernel can't reliably request the flush
from the CS on MTL either, so restrict the new PIPE_CONTROL bit to
GRAPHICS_VERx100 >= 2000 (Xe2 and later), where it can be relied on.
Explicitly set PIPE_CONTROL0_UNTYPED_DATAPORT_CACHE_FLUSH together
with PIPE_CONTROL0_HDC_PIPELINE_FLUSH in emit_render_cache_flush() on
Xe2 and later, so the L1 data cache is known clean before memory is
released for reuse, without depending on undocumented
platform-specific HDC_CHICKEN0 behavior.
Bspec: 56551
(cherry picked from commit 434514b6fe731e873808297c268fc52cdf4a1ce6)
Metrics
Affected Vendors & Products
Advisories
No advisories yet.
Fixes
Solution
No solution given by the vendor.
Workaround
No workaround given by the vendor.
References
History
Fri, 25 Sep 2026 10:30:00 +0000
| Type | Values Removed | Values Added |
|---|---|---|
| Description | In the Linux kernel, the following vulnerability has been resolved: drm/xe: Flush LSC untyped L1 dataport cache after rcs/ccs batches emit_render_cache_flush() sets PIPE_CONTROL0_HDC_PIPELINE_FLUSH to flush the L2/HDC data cache before fence signalling, but it never requests a flush of the LSC untyped L1 data cache via the 'Untyped Data-Port Cache Flush Enable' bit in PIPE_CONTROL DWord0[11]. Per the Bspec, in 3D pipeline mode HDC Pipeline Flush is documented to also flush/invalidate the untyped L1 cache, but only depending on how HDC_CHICKEN0[13:11] is programmed. Starting with MTL, this coupling between HDC Pipeline Flush and the untyped L1 cache flush no longer holds in practice, regardless of how HDC_CHICKEN0 is programmed, so relying on it is not safe on newer platforms such as BMG. Mesa's Vulkan driver (anv) has been assuming the kernel flushes both caches between submissions, and hit user-visible corruption in apps such as Llama.cpp because of this gap; it now works around it by flushing both caches again from userspace at the end of every command buffer. Correctness between submissions on the same queue is userspace's responsibility and belongs in Mesa, not the kernel. However, for security we must ensure stale data can't leak through the untyped L1 dataport cache once memory is reclaimed or evicted, which requires the KMD to flush it before releasing memory for reuse. Prior to MTL, HDC_CHICKEN0 could be programmed (as already done for DG2 via Wa_22010960976/Wa_14013347512) to reliably keep HDC Pipeline Flush coupled to the untyped L1 cache flush, so those platforms are unaffected. Mesa's own anv driver found that on MTL the HW disconnected the two independently of how HDC_CHICKEN0 is programmed, and could not bring the old behavior back even by writing the register by hand; see Mesa commit 7c2ff46a4fc3 ("anv: don't prevent L1 untyped cache flush in 3D mode"). The kernel can't reliably request the flush from the CS on MTL either, so restrict the new PIPE_CONTROL bit to GRAPHICS_VERx100 >= 2000 (Xe2 and later), where it can be relied on. Explicitly set PIPE_CONTROL0_UNTYPED_DATAPORT_CACHE_FLUSH together with PIPE_CONTROL0_HDC_PIPELINE_FLUSH in emit_render_cache_flush() on Xe2 and later, so the L1 data cache is known clean before memory is released for reuse, without depending on undocumented platform-specific HDC_CHICKEN0 behavior. Bspec: 56551 (cherry picked from commit 434514b6fe731e873808297c268fc52cdf4a1ce6) | |
| Title | drm/xe: Flush LSC untyped L1 dataport cache after rcs/ccs batches | |
| First Time appeared |
Linux
Linux linux Kernel |
|
| CPEs | cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:* | |
| Vendors & Products |
Linux
Linux linux Kernel |
|
| References |
|
Projects
Sign in to view the affected projects.
MITRE
Status: PUBLISHED
Assigner: Linux
Published:
Updated: 2026-09-25T10:22:26.242Z
Reserved: 2026-09-24T16:01:01.159Z
Link: CVE-2026-97620
Vulnrichment
No data.
NVD
Status : Received
Published: 2026-09-25T11:17:16.240
Modified: 2026-09-25T11:17:16.240
Link: CVE-2026-97620
Redhat
No data.
OpenCVE Enrichment
No data.
Weaknesses
No weakness.