| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: lan743x: Modify the EEPROM and OTP size for PCI1xxxx devices
Maximum OTP and EEPROM size for hearthstone PCI1xxxx devices are 8 Kb
and 64 Kb respectively. Adjust max size definitions and return correct
EEPROM length based on device. Also prevent out-of-bound read/write. |
| An authenticated command injection vulnerability exists in the Beward N100 IP Camera firmware version M2.1.6.04C014 via the ServerName and TimeZone parameters in the servetest CGI page. An attacker with access to the web interface can inject arbitrary system commands into these parameters, which are unsafely embedded into backend system calls without proper input sanitization. Successful exploitation results in remote code execution with root privileges. Exploitation evidence was observed by the Shadowserver Foundation on 2024-12-02 UTC. |
| In the Linux kernel, the following vulnerability has been resolved:
perf: Fix sample vs do_exit()
Baisheng Gao reported an ARM64 crash, which Mark decoded as being a
synchronous external abort -- most likely due to trying to access
MMIO in bad ways.
The crash further shows perf trying to do a user stack sample while in
exit_mmap()'s tlb_finish_mmu() -- i.e. while tearing down the address
space it is trying to access.
It turns out that we stop perf after we tear down the userspace mm; a
receipie for disaster, since perf likes to access userspace for
various reasons.
Flip this order by moving up where we stop perf in do_exit().
Additionally, harden PERF_SAMPLE_CALLCHAIN and PERF_SAMPLE_STACK_USER
to abort when the current task does not have an mm (exit_mm() makes
sure to set current->mm = NULL; before commencing with the actual
teardown). Such that CPU wide events don't trip on this same problem. |
| This CVE id was assigned but later discarded. |
| In the Linux kernel, the following vulnerability has been resolved:
ubifs: Set page uptodate in the correct place
Page cache reads are lockless, so setting the freshly allocated page
uptodate before we've overwritten it with the data it's supposed to have
in it will allow a simultaneous reader to see old data. Move the call
to SetPageUptodate into ubifs_write_end(), which is after we copied the
new data into the page. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ll_temac: platform_get_resource replaced by wrong function
The function platform_get_resource was replaced with
devm_platform_ioremap_resource_byname and is called using 0 as name.
This eventually ends up in platform_get_resource_byname in the call
stack, where it causes a null pointer in strcmp.
if (type == resource_type(r) && !strcmp(r->name, name))
It should have been replaced with devm_platform_ioremap_resource. |
| In the Linux kernel, the following vulnerability has been resolved:
pipe: wakeup wr_wait after setting max_usage
Commit c73be61cede5 ("pipe: Add general notification queue support") a
regression was introduced that would lock up resized pipes under certain
conditions. See the reproducer in [1].
The commit resizing the pipe ring size was moved to a different
function, doing that moved the wakeup for pipe->wr_wait before actually
raising pipe->max_usage. If a pipe was full before the resize occured it
would result in the wakeup never actually triggering pipe_write.
Set @max_usage and @nr_accounted before waking writers if this isn't a
watch queue.
[Christian Brauner <[email protected]>: rewrite to account for watch queues] |
| In the Linux kernel, the following vulnerability has been resolved:
Input: ims-pcu - check record size in ims_pcu_flash_firmware()
The "len" variable comes from the firmware and we generally do
trust firmware, but it's always better to double check. If the "len"
is too large it could result in memory corruption when we do
"memcpy(fragment->data, rec->data, len);" |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: sch_qfq: Fix race condition on qfq_aggregate
A race condition can occur when 'agg' is modified in qfq_change_agg
(called during qfq_enqueue) while other threads access it
concurrently. For example, qfq_dump_class may trigger a NULL
dereference, and qfq_delete_class may cause a use-after-free.
This patch addresses the issue by:
1. Moved qfq_destroy_class into the critical section.
2. Added sch_tree_lock protection to qfq_dump_class and
qfq_dump_class_stats. |
| In the Linux kernel, the following vulnerability has been resolved:
comedi: Fix initialization of data for instructions that write to subdevice
Some Comedi subdevice instruction handlers are known to access
instruction data elements beyond the first `insn->n` elements in some
cases. The `do_insn_ioctl()` and `do_insnlist_ioctl()` functions
allocate at least `MIN_SAMPLES` (16) data elements to deal with this,
but they do not initialize all of that. For Comedi instruction codes
that write to the subdevice, the first `insn->n` data elements are
copied from user-space, but the remaining elements are left
uninitialized. That could be a problem if the subdevice instruction
handler reads the uninitialized data. Ensure that the first
`MIN_SAMPLES` elements are initialized before calling these instruction
handlers, filling the uncopied elements with 0. For
`do_insnlist_ioctl()`, the same data buffer elements are used for
handling a list of instructions, so ensure the first `MIN_SAMPLES`
elements are initialized for each instruction that writes to the
subdevice. |
| In the Linux kernel, the following vulnerability has been resolved:
rpmsg: virtio: Free driver_override when rpmsg_remove()
Free driver_override when rpmsg_remove(), otherwise
the following memory leak will occur:
unreferenced object 0xffff0000d55d7080 (size 128):
comm "kworker/u8:2", pid 56, jiffies 4294893188 (age 214.272s)
hex dump (first 32 bytes):
72 70 6d 73 67 5f 6e 73 00 00 00 00 00 00 00 00 rpmsg_ns........
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<000000009c94c9c1>] __kmem_cache_alloc_node+0x1f8/0x320
[<000000002300d89b>] __kmalloc_node_track_caller+0x44/0x70
[<00000000228a60c3>] kstrndup+0x4c/0x90
[<0000000077158695>] driver_set_override+0xd0/0x164
[<000000003e9c4ea5>] rpmsg_register_device_override+0x98/0x170
[<000000001c0c89a8>] rpmsg_ns_register_device+0x24/0x30
[<000000008bbf8fa2>] rpmsg_probe+0x2e0/0x3ec
[<00000000e65a68df>] virtio_dev_probe+0x1c0/0x280
[<00000000443331cc>] really_probe+0xbc/0x2dc
[<00000000391064b1>] __driver_probe_device+0x78/0xe0
[<00000000a41c9a5b>] driver_probe_device+0xd8/0x160
[<000000009c3bd5df>] __device_attach_driver+0xb8/0x140
[<0000000043cd7614>] bus_for_each_drv+0x7c/0xd4
[<000000003b929a36>] __device_attach+0x9c/0x19c
[<00000000a94e0ba8>] device_initial_probe+0x14/0x20
[<000000003c999637>] bus_probe_device+0xa0/0xac |
| DO NOT USE THIS CVE RECORD. ConsultIDs: none. Reason: This record was withdrawn by its CNA. Further investigation showed that it was not a security issue. Notes: none. |
| ** REJECT ** DO NOT USE THIS CANDIDATE NUMBER. Reason: This candidate was issued in error. Notes: All references and descriptions in this candidate have been removed to prevent accidental usage. |
| An issue was discovered in allauth-django before 65.13.0. Both Okta and NetIQ were using preferred_username as the identifier for third-party provider accounts. That value may be mutable and should therefore be avoided for authorization decisions. The providers are now using sub instead. |
| An issue was discovered in Wekan The Open Source kanban board system up to version 18.15, fixed in 18.16. Authorization flaw in card update handling allows board members (and potentially other authenticated users) to add/remove arbitrary user IDs in vote.positive / vote.negative arrays, enabling vote forgery and unauthorized voting. |
| FNT Command 13.4.0 is vulnerable to Code Execution via the C Base Module. |
| FNT Command 13.4.0 is vulnerable to Directory Traversal. |
| The Rich Review plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the POST body 'update' parameter in versions up to, and including, 1.7.4 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| The ARI-Adminer plugin for WordPress is vulnerable to authorization bypass due to a lack of file access controls in nearly every file of the plugin in versions up to, and including, 1.1.14. This makes it possible for unauthenticated attackers to call the files directly and perform a wide variety of unauthorized actions such as accessing a site's database and making changes. |
| A Zip Slip vulnerability in the import a Project component of iceScrum v7.54 Pro On-prem allows attackers to execute arbitrary code via uploading a crafted Zip file. |
