| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
namespace: unhash a dentry before detaching the mounts on it
unlink(), rmdir() and rename() remove the entry from the filesystem,
call detach_mounts() on the entry with the inode locked and then call
d_delete() once the inode is unlocked.
The thing is that between detach_mounts() and d_delete() the dentry is
still hashed and positive. But after detach_mounts() nothing covers the
dentry anymore. A lookup that finds this dentry in the dcache can
uncover what the mounts hid.
That's a problem when unlinking files or directories that are
mountpoints in other mount namespaces. Everybody who had the underlying
entry covered can race the detach_mount() call until d_delete() has run.
The race window isn't all that small. It encompasses namespace_unlock()
with a full synchronize_rcu_expedited() grace period and the
inode_unlock() of the entry.
In my experiments three walkers that kept trying read an overmounted
file in 11938 of the 16140 unlinks that removed its mountpoint from a
bind mount of the filesystem within a minute.
Fun fact, d_invalidate() has the same ordering problem but gets it
right. It unhashes the dentry first and detaches the mounts afterwards.
Let's do the same in __detach_mounts():
- A lookup that hasn't found the dentry yet misses it in the dcache and
waits for the directory lock that the caller holds until the name is
gone for good.
- A lockless lookup that found it already fails the mount_lock check
while the dentry still counts as a mountpoint and the d_seq check once
it doesn't, and retries.
This fixes the lockless path. We still need to fix the reference count
lookup in a follow-up patch.
So d_drop() the dentry. The dentry stays positive and held but can't be
found anymore. Then proceed with the detach and unlink.
Reproducer:
The reads were counted with the program below, three walkers for 60 s
in a VM with 4 CPUs. The race window is stretched with the debug patch
pasted here. fs.detach_race_walk_us sleeps in lookup_fast() once it
found a mountpoint dentry and before its mounts are crossed.
fs.detach_race_unlink_us sleeps in vfs_unlink() between detach_mounts()
and d_delete().
// SPDX-License-Identifier: GPL-2.0
/*
* unlink_covered: unlink a file that is a mountpoint in a detached copy of
* its mount, against lookups that open it through that copy.
*
* A is a tmpfs with the file f1 (content SECRET_F) and the plain file
* MARK_A. A' is an open_tree(OPEN_TREE_CLONE) copy of A with MARK_A bound
* on A'/f1, held through an O_PATH fd on its root once the tree fd is
* closed. Walkers open f1 through that fd while the driver unlinks A/f1,
* where nothing is mounted on it. A walker may read MARK_A or get ENOENT.
* A read of SECRET_F is a hit: the name was found after its mount was
* gone. The lockless walks use openat2(RESOLVE_CACHED).
*
* usage: unlink_covered [-t seconds] [-w walkers]
*/
#ifndef _GNU_SOURCE
#define _GNU_SOURCE
#endif
#include <errno.h>
#include <fcntl.h>
#include <pthread.h>
#include <stdatomic.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <sys/mount.h>
#include <sys/stat.h>
#include <sys/syscall.h>
#include <linux/openat2.h>
#ifndef __NR_open_tree
#define __NR_open_tree 428
#endif
#ifndef __NR_move_mount
#define __NR_move_mount 429
#endif
#ifndef __NR_openat2
#define __NR_openat2 437
#endif
#ifndef OPEN_TREE_CLONE
#define OPEN_TREE_CLONE 1
#endif
#ifndef OPEN_TREE_CLOEXEC
#define OPEN_TREE_CLOEXEC O_CLOEXEC
#endif
#ifndef MOVE_MOUNT_F_EMPTY_PATH
#define MOVE_MOUNT_F_EMPTY_PATH 0x00000004
#endif
#define WORK "/tmp/uc"
#define ADIR WORK "/A"
static int duration = 60, nwalkers = 3;
static atomic_int stop, writer_waiting;
static pthread_rwlock_t cur_lock = PTHREAD_RWLOCK_INITIALIZER;
static int cur_fd = -1; /* the root of A', -1 wh
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
namespace: don't let a pseudo dentry become the root of a mount
d_alloc_pseudo() hands out dentries for pipes, sockets and other files
that are never anyone's child or parent. They carry DCACHE_NORCU and
dentry_free() frees them right away because no lockless path walk can
ever reach them. That holds as long as such a dentry isn't the root of
a mount. But bind mounting /proc/self/fd/<fd> of such a file does
exactly that.
Most callers of alloc_file_pseudo() put their files on kernel-internal
mounts and may_copy_tree() refuses those. bpf_token_create() doesn't. It
places the token file on the bpffs mount the caller handed it and that
mount is in the caller's mount namespace so the clone goes through:
mount --bind /proc/self/fd/<token> <file>
open_tree(tokfd, "", AT_EMPTY_PATH | OPEN_TREE_CLONE) + move_mount()
__follow_mount_rcu() then loads ->mnt_root of that mount, reads d_seq
and d_flags of the dentry and only then checks mount_lock. The dentry
can be gone by then. The final mntput() of an unmounted parent unhooks
a child that stayed attached to it under mount_lock alone. When the
child's holder does the final put right after that the root is dput()
and freed immediately while a walker that found the mount hashed still
looks at it.
Refuse to clone a mount with a DCACHE_NORCU dentry as its root. Nothing
sensible can be done with a bind mount of a bpf token anyway. |
| In the Linux kernel, the following vulnerability has been resolved:
namespace: check the mounts before reading their parents in pivot_root()
path_pivot_root() reads the parents of new_root and of the caller's root
and checks whether they are shared before it checks that either mount is
in the caller's mount namespace. Only namespace_sem is held. That's fine
for a mount that is in the caller's mount namespace.
But new_root can be a file descriptor to a mount that has been unmounted
and that only the file descriptor keeps alive. If that mount stayed
attached to its parent when it was unmounted nothing pins the parent for
it. The final mntput() of the parent unhooks the children under
mount_lock alone and frees the parent afterwards:
pivot_root() close(fd), last ref on the parent
------------ ---------------------------------
ex_parent = new_mnt->mnt_parent
mntput_no_expire_slowpath()
__umount_mnt(new_mnt)
cleanup_mnt()
call_rcu()
IS_MNT_SHARED(ex_parent)
BUG: KASAN: slab-use-after-free in path_pivot_root+0xf1a/0x1840
Read of size 4 at addr ffff8881047382f8 by task pivot_widen/157
path_pivot_root+0xf1a/0x1840
__x64_sys_pivot_root+0x165/0x190
The same goes for the caller's root via chroot(). Both outcomes of the
check end in EINVAL so nothing but the read itself goes wrong. It's the
same thing commit bb4609405752 ("statmount: read the parent of an
unmounted mount under mount_lock") fixed for statmount().
Check that both mounts are in the caller's namespace before their
parents are read. Every path returns EINVAL either way. |
| A Signed to Unsigned Conversion Error vulnerability in the srxpfe of Juniper Networks Junos OS on the SRX Series allows an adjacent attacker to cause a denial of service of the data plane via chassis-cluster fabric traffic. |
| An Integer Underflow (Wrap or Wraparound) vulnerability in the rpd process of Juniper Networks Junos OS on EX Series and MX Series, and Junos OS Evolved on ACX Series allows an unauthenticated adjacent attacker to cause heap memory disclosure and multicast join-state injection via a malformed Rosen-MVPN message.
This issue only affects platforms that support draft Rosen MVPN, such as the ACX Series, EX Series, and MX Series. |
| Loop with Unreachable Exit Condition ('Infinite Loop') vulnerability in Erlang OTP stdlib (erl_tar module), hexpm hex_core (hex_erl_tar module), hexpm hex (mix_hex_erl_tar module) and erlang rebar3 (r3_hex_erl_tar module) allows an attacker who supplies a tar archive to cause a denial of service via a crafted GNU sparse member.
When erl_tar:extract/1,2 writes a member to disk, erl_tar:stream_to_file_loop/3 reads it in chunks of 65536 bytes by default. For a GNU sparse member whose sparse map ends before its real size, erl_tar:do_sparse_read/3 matches its trailing-hole clause before its zero-length clause. After the chunk is used up, the trailing-hole clause reads zero bytes, does not advance the position, and recurses forever. A 2048-byte archive keeps the extracting process and one scheduler busy until the process is killed. The {max_size, N} option prevents this only when N is below the real size of the member. Extraction with the memory option is not affected.
hex_core ships its own copy of erl_tar as hex_erl_tar, and Hex and rebar3 ship hex_core with prefixed module names (mix_hex_erl_tar and r3_hex_erl_tar). These copies contain the same code and do not call stdlib's erl_tar, so they are affected on any OTP version. OTP 28 is not affected, but an application running on OTP 28 is affected if it extracts archives through an affected version of hex_core, Hex or rebar3.
This issue affects OTP from OTP 29.0 before OTP 29.1.2, corresponding to rebar3 from 3.27.1 before 3.28.0, and stdlib from 8.0 before 8.1.1, and hex from 2.4.2 before 2.5.3; hex_core: from 0.14.0 before 0.20.1. |
| An Out-of-bounds Write vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an eBGP peer which has not negotiated four-octet-AS capability sending a specifically malformed BGP update to cause a Denial-of-Service (DoS). |
| F´ (F Prime) is a framework that enables development and deployment of spaceflight and other embedded software applications. Prior to 4.2.0, Fw::FilePacket deserialization used by Svc::FileUplink is vulnerable because Header deserialization casts the byte to the Type enum without validating its range and FilePacket::fromSerialBuffer reaches a default FW_ASSERT. When a network file packet contains an unknown file-packet type byte, the assertion aborts or resets the default Ref application process, causing denial of service. This issue is fixed in version 4.2.0. |
| A flaw was found in evolution-data-server. Calendar events containing a file:// URI in their ATTACH property automatically read the targeted local file, base64-encode its contents and upload it back to the server when the event is saved. There are no file path restrictions or checks to verify whether the attachment originally came from the server or was added locally. This allows an attacker with access to a shared CalDAV calendar to exfiltrate arbitrary files the user has access to when interacting with malicious calendar events. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in hippooo Hippoo Mobile App for WooCommerce hippoo allows Reflected XSS.This issue affects Hippoo Mobile App for WooCommerce: from n/a through 1.12.0. |
| A stored cross-site scripting (XSS) vulnerability in Palo Alto Networks PAN-OS® software enables a malicious authenticated administrator to store or execute a JavaScript payload using the web interface.
The security risk posed by this issue is minimized when the management interface is restricted to only trusted internal IP addresses according to our recommended best practice deployment guidelines https://live.paloaltonetworks.com/t5/community-blogs/tips-amp-tricks-how-to-secure-the-management-access-of-your-palo/ba-p/464431 .
This issue is applicable to PAN-OS® software on PA-Series and VM-Series firewalls and on Panorama (virtual and M-Series).
Cloud NGFW and Prisma® Access are not affected by these vulnerabilities. |
| PraisonAI is a multi-agent teams system. From version 4.6.56 to before version 4.6.59, PraisonAI's LinearBot starts a public webhook listener on 0.0.0.0 and treats LINEAR_WEBHOOK_SECRET as optional. When the secret is absent, startup only logs a warning and _handle_webhook() skips Linear-Signature verification entirely. An unauthenticated network caller who can reach the webhook endpoint can submit a forged Linear-Event: AgentSession request. The forged request is parsed, scheduled for background processing, dispatched to _handle_agent_session(), and passed into BotSessionManager.chat(). The bot then attempts to post the agent response back to Linear under the configured bot token. The PoV is offline and deterministic. It does not contact Linear. It calls the webhook handler directly, monkey-patches the outbound Linear comment path, and proves both sides of the boundary. This issue has been patched in version 4.6.59. |
| Vulnerability in Oracle Essbase (component: Security). The supported version that is affected is 21.8.3.0.0. Difficult to exploit vulnerability allows unauthenticated attacker with network access via T3, IIOP to compromise Oracle Essbase. Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of Oracle Essbase accessible data as well as unauthorized read access to a subset of Oracle Essbase accessible data and unauthorized ability to cause a partial denial of service (partial DOS) of Oracle Essbase. CVSS 3.1 Base Score 5.6 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:L/A:L). |
| When the HTTP stream wrapper follows a redirect and the response carries a Location header with an empty value, the redirect code reads one byte past the end of the heap buffer holding the location. The value of that out-of-bounds byte decides which redirect target is built, so a malicious server controls whether the client is sent to the host root or to the current directory. |
| The SOAP HTTP client guards its response buffer growth with a check that relies on signed integer overflow, which is undefined behaviour and is not guaranteed to trigger. When the check is optimised away, a malicious SOAP server can make the client allocate a buffer far smaller than the data it then writes into it, producing a heap buffer overflow. |
| The mysqlnd wire protocol parser reads fields out of server packets before checking that the packet still holds enough bytes for them. A malicious or compromised MySQL server can send a truncated packet and make the client read past the end of the packet buffer, which is undefined behaviour and can crash the process. |
| Kitodo.Production is a workflow management tool for mass digitization and is part of the Kitodo Digital Library Suite. Prior to version 3.9.2, org.kitodo.production.helper.XMLUtils exposes several XML parsing helpers that construct a JAXP parser with the default, non-secure configuration. The methods parseXMLString(String), getNumberOfEADElements(String, String) and checkIfXmlIsWellFormed(String) build a DocumentBuilderFactory / XMLInputFactory / SAXParserFactory via newInstance() and parse the attacker-supplied string without disabling DOCTYPE declarations or external entity resolution. These helpers sit directly on the EAD-import path: an authenticated user who uploads an EAD/XML file through the "Create process" file-upload dialog has the uploaded bytes parsed by these methods. A crafted document with an external entity therefore yields XML External Entity (XXE) injection: local file disclosure and outbound SSRF requests from the server. This issue has been patched in version 3.9.2. |
| Uni-CLI gives people and agents one command interface for websites, browsers, desktop applications, local tools, and MCP. Prior to version 0.225.2, Uni-CLI exposed the legacy JSON-RPC-over-HTTP MCP transport on loopback without validating browser Origin headers before routing requests. A malicious web page could send a CORS simple POST request, such as text/plain, to the local /mcp endpoint and deliver a JSON-RPC body to the dispatcher. If the user had started the local MCP HTTP transport, that page could drive tools/call requests against the user's local Uni-CLI server. The Streamable HTTP transport already enforced this browser-to-localhost boundary. The legacy stateless HTTP path did not, so the two HTTP transports had drifted. This issue is about the browser-to-localhost boundary; it does not change Uni-CLI's local-code-execution trust model. This issue has been patched in version 0.225.2. |
| An issue in @rog0x/mcp-git-tools 1.0.1 allows a remote attacker to execute arbitrary code via the resolveBaseBranch function. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: hub: use shorter 120ms post resume hold for SS root hubs
Holding a USB3 hub PM runtime reference for 200ms at hub resume triggers
an AMD platform issue. Users running Android adb report crashes after
adb has been polling and waking up the USB subsystem once a second for
some time. Vendors are working on a solution. Disabling USB runtime PM
is one way to prevent this issue, but it is also proven that reducing the
hold time to 120ms in resume also mitigates it. See Link for more
details.
Reducing the hold time to 120ms for the USB3 roothub is in itself a valid
change and optimization, as the current 200ms is excessive: a root hub
has no upstream suspended hub whose wake propagation needs to be
accounted for, but still need some time for USB3 link training to
complete.
Keep the 200ms hold for external hubs that commit 8f5b7e2bec1c
("usb: hub: fix detection of high tier USB3 devices behind suspended
hubs") is intended for. |
