| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Roo Code through 3.54.0 contains a command approval bypass vulnerability in parseCommandLine() that allows attackers to auto-approve arbitrary shell commands by placing a command substitution in command position. Attackers using indirect prompt injection can submit commands like $(echo touch /tmp/x) that pass the echo allowlist check, causing the shell to execute the output without user approval. |
| Use after free in Windows DHCP Client allows an unauthorized attacker to execute code over an adjacent network. |
| F´ (F Prime) is a framework that enables development and deployment of spaceflight and other embedded software applications. Prior to 4.2.0, Svc::FpySequencer STORE directive stack write validation the bounds check adds attacker-controlled offset and size before memcpy, allowing integer wraparound to make an out-of-range destination appear valid. When a sequence-controlled STORE directive supplies a stack offset and size whose U32 sum wraps, memcpy can write outside the sequencer stack, causing memory corruption, denial of service, and potentially code execution. This issue is fixed in version 4.2.0. |
| F´ (F Prime) is a framework that enables development and deployment of spaceflight and other embedded software applications. Prior to 4.3.0, Svc::EventManager loqQueue_internalInterfaceHandler packetization is vulnerable because EventManager accepts up to the framework LogBuffer maximum, but packet descriptor, event identifier, and time-tag metadata consume part of the larger ComBuffer and leave a smaller remaining budget for log arguments; serialization failure then reaches an assertion. When a deployment bridges events through GenericHub into EventManager and forwards a legal Fw::LogBuffer larger than EventManager remaining log-argument budget, under standard F Prime assertion handling, a legal bridged event payload aborts or resets the process, causing denial of service. This issue is fixed in version 4.3.0. |
| F´ (F Prime) is a framework that enables development and deployment of spaceflight and other embedded software applications. Prior to 4.3.0, Svc::FileDownlink SendPartial range validation is vulnerable because unchecked startOffset plus length arithmetic bypasses the range check and stores a wrapped m_endOffset that is inconsistent with m_byteOffset. When an existing source file is larger than a valid startOffset and a SendPartial command supplies a length whose U32 sum with that offset wraps below the file size, under standard F Prime assertion handling, the first data-packet transition reaches FW_ASSERT and aborts or resets the process, causing denial of service. This issue is fixed in version 4.3.0. |
| F´ (F Prime) is a framework that enables development and deployment of spaceflight and other embedded software applications. From 4.1.0 until 4.2.0, Svc::GenericHub output-port dispatch is vulnerable because the deserialized port field is passed to serialOut_out, bufferOut_out, eventOut_out, or tlmOut_out without an explicit range check. When a remote hub packet supplies a port index outside the configured output-port array, assert-enabled builds abort, while builds without assertions can access an output-port array out of bounds, corrupt heap memory, and potentially allow remote code execution. This issue is fixed in version 4.2.0. |
| Out-of-bounds read in Microsoft Office Excel allows an unauthorized attacker to disclose information over a network. |
| Out-of-bounds read in Microsoft Office Excel allows an unauthorized attacker to disclose information over a network. |
| A defect in the Qt for MCUs core string handling causes heap memory corruption. When an application passes text into Qt Quick Ultralite using the public Qul::String interface type, and that text is held in a std::string, the conversion to the internal string type copies the pointer without taking ownership of it. Two objects then release the same memory, producing a double free, an invalid free, or a use-after-free. |
| Improper Following of a Certificate's Chain of Trust vulnerability in Erlang OTP public_key (pubkey_cert module) allows a non-CA certificate to be accepted as an intermediate issuer, enabling certificate chain forgery.
In lib/public_key/src/pubkey_cert.erl, pubkey_cert:validate_extensions/7 contains two flaws that together allow a certificate with basicConstraints cA:false and no keyUsage extension to be used as an intermediate issuer in a chain passed to public_key:pkix_path_validation/3: the cA:false clause recurses into the remaining extensions without rejecting the certificate when it is in issuer position, and the keyUsage check only fires when the extension is present, so a certificate lacking keyUsage entirely bypasses the keyCertSign enforcement.
Any party holding an end-entity certificate with basicConstraints cA:false and no keyUsage extension, issued by any CA in the victim's trust store, can use that certificate's private key to sign forged leaf certificates for arbitrary identities. public_key:pkix_path_validation/3 accepts the resulting chain, and by extension every TLS or mTLS endpoint built on the OTP ssl application that relies on the default verifier is affected, including server identity verification on the client side and client certificate verification on mTLS servers.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.19, OTP 28.5.0.8, and OTP 29.1.2, corresponding to public_key from 0.22 before 1.17.1.7, 1.20.3.6, and 1.21.8. Whether OTP before OTP 17.0, corresponding to public_key before 0.22, is affected is unknown. |
| Buffer over-read in Microsoft Office Excel allows an unauthorized attacker to disclose information over a network. |
| Buffer over-read in Microsoft Office Excel allows an unauthorized attacker to disclose information over a network. |
| Out-of-bounds Write (CWE-787) in the PEA archive extraction routine (pea.pas, unpea_procedure) of the first-party pea component in PeaZip 11.2.0 and earlier allows an attacker who convinces a victim to open or extract a crafted .pea archive to execute arbitrary code as the user running PeaZip. While decompressing a PCOMPRESS1 stream, the 32-bit compressed-block-size field of the first block (compsize) is read directly from the archive and used without validation as the length of a blockread into the fixed-size global buffers wbuf1/wbuf2 (1,114,112 bytes) and as the bound of the subsequent copy loop. The existing check "compsize > WBUFSIZE" is applied only to the size of each following block, so the first block escapes it; the same unvalidated value is also used to index wbuf1[compsize], an out-of-bounds read at an attacker-chosen offset. The copy loop additionally copies the requested length instead of the number of bytes actually read, and terminates on equality rather than on an upper bound. Because the project is built without range checking and no archive password, integrity tag or non-default configuration is required, the overflow overwrites adjacent global data; code execution was demonstrated by two independent researchers against the official Linux x86-64 and Windows x64 builds, and the denial-of-service and memory-corruption primitive is cross-platform (Windows, macOS, Linux, BSD). |
| Heap-based buffer overflow in Microsoft Office Excel allows an unauthorized attacker to execute code over a network. |
| Heap-based buffer overflow in Microsoft Office Excel allows an unauthorized attacker to execute code over a network. |
| Use of uninitialized resource in Microsoft Office Excel allows an unauthorized attacker to execute code over a network. |
| The CC1200 sub-GHz IEEE 802.15.4 driver takes the PHY packet length from the first byte of the radio's RX FIFO in get_packet_length() and validates it in verify_rxfifo_validity() (drivers/ieee802154/ieee802154_cc1200.c). That validation only enforced a lower bound (pkt_len < 3); its second clause rejects a FIFO that holds more bytes than declared and therefore never bounds large values. Because the driver configures the radio for variable packet length with PKT_LEN = 0xFF, the length byte is an over-the-air value of 0-255 that reached net_pkt_rx_alloc_with_buffer() and the subsequent SPI burst read unclamped.
An unauthenticated attacker within radio range can transmit a frame that presents a length byte above the IEEE 802.15.4 maximum of 127 while the chip's 128-byte RX FIFO has not overflowed, so the driver's RX_FIFO_ERROR pre-check does not fire. Reaching this state depends on RF framing and timing, since the RX thread is driven off the PKT_SYNC_RXTX signal and may sample the FIFO before a packet is complete; no pairing, authentication, or user interaction is required.
With the default CONFIG_NET_BUF_FIXED_DATA_SIZE and CONFIG_NET_BUF_DATA_SIZE=128, an allocation larger than one fragment is satisfied by a chain of fragments, but read_rxfifo_content() performs a single SPI burst of pkt_len bytes into the first fragment's buf->data and then calls net_buf_add() with the same length. A length above 128 therefore writes up to 127 bytes past the end of a fragment in the contiguous rx_bufs pool and leaves a net_buf whose len exceeds its capacity. The overflowing bytes are FIFO-underflow output rather than attacker-chosen data, so the practical impact is network-buffer-pool corruption and crashes rather than a controlled write. Only builds that enable CONFIG_IEEE802154_CC1200 with an attached CC1200 radio are affected. |
| The receive path of the NXP KW41Z IEEE 802.15.4 driver, kw41z_rx() in drivers/ieee802154/ieee802154_kw41z.c, computed the payload size as pkt_len = len - KW41Z_FCS_LENGTH in a uint8_t, where len is the frame length reported by the radio. The interrupt handler kw41z_isr() obtained that length from the RX_FRAME_LENGTH field of the ZLL IRQSTS register — a copy of the PHY header length byte of the frame received over the air — and only rejected the value zero. A reported length of one therefore underflowed to pkt_len == 255.
Because the packet is allocated with NET_AF_UNSPEC on a non-Ethernet L2, net_pkt_rx_alloc_with_buffer() does not clamp the request to the interface MTU; with the default fixed-size buffer pool (CONFIG_NET_BUF_FIXED_DATA_SIZE, CONFIG_NET_BUF_DATA_SIZE=128) the allocation succeeded as a chain of two fragments. The subsequent register-to-buffer copy loops write into the first fragment only, so 255 bytes were written into a 128-byte net_buf data block, overrunning it by up to 127 bytes into adjacent network-buffer-pool memory, and reading up to 128 bytes past the end of the radio's PKT_BUFFER_RX register array.
The length field originates from an unauthenticated frame transmitted by any device within 802.15.4 radio range, and is captured by the hardware at PHY-header time — before frame filtering has completed — while the handler samples it after clearing the interrupt status, so an attacker flooding frames with a length byte of one can drive the underflow. The impact is memory corruption in the shared receive buffer pool from interrupt context, most plausibly a crash or corruption of other packets' data; the overflowing bytes are radio register contents rather than attacker-authored data, which bounds the integrity impact.
The fix rejects any length below KW41Z_FCS_LENGTH and additionally verifies net_buf_tailroom() of the first fragment before the copy loops, which also covers the CONFIG_NET_L2_OPENTHREAD variant of the size computation. |
| A Reachable Assertion vulnerability in the rpd process of Juniper Networks Junos OS and Junos EVO allows an adjacent attacker to cause a denial of service via an established LDP session carrying an IPv6 Prefix FEC in a specific Label message. |
| An Improper Input Validation vulnerability in the rpd process of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated adjacent attacker to cause a denial of service via a malformed PIM Hello message received on an IPv6-enabled PIM interface. |
