| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix potential UAF after skb_unshare() failure
If skb_unshare() fails to unshare a packet due to allocation failure in
rxrpc_input_packet(), the skb pointer in the parent (rxrpc_io_thread())
will be NULL'd out. This will likely cause the call to
trace_rxrpc_rx_done() to oops.
Fix this by moving the unsharing down to where rxrpc_input_call_event()
calls rxrpc_input_call_packet(). There are a number of places prior to
that where we ignore DATA packets for a variety of reasons (such as the
call already being complete) for which an unshare is then avoided.
And with that, rxrpc_input_packet() doesn't need to take a pointer to the
pointer to the packet, so change that to just a pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
gfs2: Fix use-after-free in iomap inline data write path
The inline data buffer head (dibh) is being released prematurely in
gfs2_iomap_begin() via release_metapath() while iomap->inline_data
still points to dibh->b_data. This causes a use-after-free when
iomap_write_end_inline() later attempts to write to the inline data
area.
The bug sequence:
1. gfs2_iomap_begin() calls gfs2_meta_inode_buffer() to read inode
metadata into dibh
2. Sets iomap->inline_data = dibh->b_data + sizeof(struct gfs2_dinode)
3. Calls release_metapath() which calls brelse(dibh), dropping refcount
to 0
4. kswapd reclaims the page (~39ms later in the syzbot report)
5. iomap_write_end_inline() tries to memcpy() to iomap->inline_data
6. KASAN detects use-after-free write to freed memory
Fix by storing dibh in iomap->private and incrementing its refcount
with get_bh() in gfs2_iomap_begin(). The buffer is then properly
released in gfs2_iomap_end() after the inline write completes,
ensuring the page stays alive for the entire iomap operation.
Note: A C reproducer is not available for this issue. The fix is based
on analysis of the KASAN report and code review showing the buffer head
is freed before use.
[agruenba: Take buffer head reference in gfs2_iomap_begin() to avoid
leaks in gfs2_iomap_get() and gfs2_iomap_alloc().] |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Do not skip unrelated mode changes in DSC validation
Starting with commit 17ce8a6907f7 ("drm/amd/display: Add dsc pre-validation in
atomic check"), amdgpu resets the CRTC state mode_changed flag to false when
recomputing the DSC configuration results in no timing change for a particular
stream.
However, this is incorrect in scenarios where a change in MST/DSC configuration
happens in the same KMS commit as another (unrelated) mode change. For example,
the integrated panel of a laptop may be configured differently (e.g., HDR
enabled/disabled) depending on whether external screens are attached. In this
case, plugging in external DP-MST screens may result in the mode_changed flag
being dropped incorrectly for the integrated panel if its DSC configuration
did not change during precomputation in pre_validate_dsc().
At this point, however, dm_update_crtc_state() has already created new streams
for CRTCs with DSC-independent mode changes. In turn,
amdgpu_dm_commit_streams() will never release the old stream, resulting in a
memory leak. amdgpu_dm_atomic_commit_tail() will never acquire a reference to
the new stream either, which manifests as a use-after-free when the stream gets
disabled later on:
BUG: KASAN: use-after-free in dc_stream_release+0x25/0x90 [amdgpu]
Write of size 4 at addr ffff88813d836524 by task kworker/9:9/29977
Workqueue: events drm_mode_rmfb_work_fn
Call Trace:
<TASK>
dump_stack_lvl+0x6e/0xa0
print_address_description.constprop.0+0x88/0x320
? dc_stream_release+0x25/0x90 [amdgpu]
print_report+0xfc/0x1ff
? srso_alias_return_thunk+0x5/0xfbef5
? __virt_addr_valid+0x225/0x4e0
? dc_stream_release+0x25/0x90 [amdgpu]
kasan_report+0xe1/0x180
? dc_stream_release+0x25/0x90 [amdgpu]
kasan_check_range+0x125/0x200
dc_stream_release+0x25/0x90 [amdgpu]
dc_state_destruct+0x14d/0x5c0 [amdgpu]
dc_state_release.part.0+0x4e/0x130 [amdgpu]
dm_atomic_destroy_state+0x3f/0x70 [amdgpu]
drm_atomic_state_default_clear+0x8ee/0xf30
? drm_mode_object_put.part.0+0xb1/0x130
__drm_atomic_state_free+0x15c/0x2d0
atomic_remove_fb+0x67e/0x980
Since there is no reliable way of figuring out whether a CRTC has unrelated
mode changes pending at the time of DSC validation, remember the value of the
mode_changed flag from before the point where a CRTC was marked as potentially
affected by a change in DSC configuration. Reset the mode_changed flag to this
earlier value instead in pre_validate_dsc().
(cherry picked from commit cc7c7121ae082b7b82891baa7280f1ff2608f22b) |
| pyOpenSSL is a Python wrapper around the OpenSSL library. Starting in version 22.0.0 and prior to version 26.0.0, if a user provided callback to `set_cookie_generate_callback` returned a cookie value greater than 256 bytes, pyOpenSSL would overflow an OpenSSL provided buffer. Starting in version 26.0.0, cookie values that are too long are now rejected. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: seq: oss: Fix UAF at handling events with embedded SysEx data
The OSS sequencer processes the input MIDI bytes into a sequencer
event to be dispatched later (in snd_seq_oss_midi_putc() called from
snd_seq_oss_process_event()). When it's a SysEx data, the event
record contains data.ext.ptr pointer to the original SysEx bytes, and
the referred data is copied into the pool afterwards at dispatching.
The problem is that, if the sequencer port gets closed concurrently
before the dispatch, the OSS sequencer core also releases the
resources (in snd_seq_oss_midi_check_exit_port()), while the pending
event may hold a stale pointer, eventually leading to a UAF at a later
dispatch.
Fortunately, there is already a refcounting mechanism (snd_use_lock_t)
for the OSS MIDI device access, and for addressing the issue above, we
just need to extend the refcount until the event gets dispatched.
This patch extends snd_seq_oss_process_event() to give back the
refcount object, which is in turn released after calling the sequencer
dispatcher with the given event in the caller side.
According to the original report, KASAN report as below:
KASAN slab-use-after-free in snd_seq_event_dup+0x40c/0x470
RIP: 0033:0x7f2cb66a6340
Read of size 6
Call trace:
dump_stack_lvl+0x73/0xb0 (?:?)
print_report+0xd1/0x650 (?:?)
srso_alias_return_thunk+0x5/0xfbef5 (?:?)
__virt_addr_valid+0x1a7/0x340 (?:?)
kasan_complete_mode_report_info+0x64/0x200 (?:?)
kasan_report+0xf7/0x130 (?:?)
snd_seq_event_dup+0x40c/0x470 (?:?)
kasan_check_range+0x10c/0x1c0 (?:?)
__asan_memcpy+0x27/0x70 (?:?)
snd_seq_event_dup+0x9/0x470 (?:?)
snd_seq_client_enqueue_event+0x139/0x240 (?:?)
_raw_spin_unlock_irqrestore+0x4b/0x60 (?:?)
snd_seq_kernel_client_enqueue+0x102/0x120 (?:?)
snd_seq_oss_write+0x416/0x4e0 (?:?)
apparmor_file_permission+0x20/0x30 (?:?)
odev_write+0x3b/0x60 (?:?)
vfs_write+0x1ce/0x850 (?:?)
lock_release+0xc8/0x2a0 (?:?)
__kasan_check_write+0x18/0x20 (?:?)
__mutex_unlock_slowpath+0x129/0x510 (?:?)
ksys_write+0xe1/0x180 (?:?)
mutex_unlock+0x16/0x20 (?:?)
odev_ioctl+0x65/0xc0 (?:?)
__x64_sys_write+0x46/0x60 (?:?)
x64_sys_call+0x7d/0x20d0 (?:?)
do_syscall_64+0xc1/0x360 (arch/x86/entry/syscall_64.c:87)
entry_SYSCALL_64_after_hwframe+0x77/0x7f (?:?) |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: ccp - Fix snp_filter_reserved_mem_regions() off-by-one
Sashiko notes:
> regarding the bounds check in snp_filter_reserved_mem_regions()
> called via walk_iomem_res_desc(): does the check
> if ((range_list->num_elements * 16 + 8) > PAGE_SIZE)
> allow an off-by-one heap buffer overflow?
>
> If range_list->num_elements is 255, 255 * 16 + 8 = 4088, which is <= 4096.
> Writing range->base (8 bytes) fills 4088-4095, but writing range->page_count
> (4 bytes) would write to 4096-4099, overflowing the kzalloc-allocated
> PAGE_SIZE buffer.
Fix this by accounting for the entry about to be written to, in addition to
the entries that are already allocated. |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-af: Block VFs from clobbering special CGX PKIND state
PF and VF NIX LFs that share a CGX LMAC reuse the same hardware PKIND
programming. When HiGig2 or EDSA parsing is enabled, a VF NIX LF alloc must
not reset the LMAC RX PKIND or default TX parse config over the PF setup.
Add cgx_get_pkind() and rvu_cgx_is_pkind_config_permitted() so VFs skip
cgx_set_pkind(), rvu_npc_set_pkind(), and NIX_AF_LFX_TX_PARSE_CFG updates
when the LMAC is using NPC_RX_HIGIG_PKIND or NPC_RX_EDSA_PKIND. |
| A vulnerability was found in Golang FIPS OpenSSL. This flaw allows a malicious user to randomly cause an uninitialized buffer length variable with a zeroed buffer to be returned in FIPS mode. It may also be possible to force a false positive match between non-equal hashes when comparing a trusted computed hmac sum to an untrusted input sum if an attacker can send a zeroed buffer in place of a pre-computed sum. It is also possible to force a derived key to be all zeros instead of an unpredictable value. This may have follow-on implications for the Go TLS stack. |
| go-gh is a collection of Go modules to make authoring GitHub CLI extensions easier. A security vulnerability has been identified in versions prior to 2.12.1 where an attacker-controlled GitHub Enterprise Server could result in executing arbitrary commands on a user's machine by replacing HTTP URLs provided by GitHub with local file paths for browsing. In `2.12.1`, `Browser.Browse()` has been enhanced to allow and disallow a variety of scenarios to avoid opening or executing files on the filesystem without unduly impacting HTTP URLs. No known workarounds are available other than upgrading. |
| Permission control vulnerability in the notification module. Impact: Successful exploitation of this vulnerability may affect availability. |
| Incorrect default permissions in Microsoft PowerShell allows an authorized attacker to elevate privileges locally. |
| UAF vulnerability in the time and time zone module. Impact: Successful exploitation of this vulnerability may affect availability. |
| Permission control vulnerability in the clipboard module. Impact: Successful exploitation of this vulnerability may affect service confidentiality. |
| Protection mechanism failure for some Intel(R) Data Center Attestation Primitives (Intel(R) DCAP) may allow information disclosure. Unprivileged software adversary with an unauthenticated user combined with a low complexity attack may enable data exposure. This result may potentially occur via network access when attack requirements are present with special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (high) and availability (none) of the vulnerable system, resulting in subsequent system confidentiality (high), integrity (none) and availability (none) impacts. |
| Insecure storage of sensitive information in the Intel(R) TDX module for some Intel(R) platform within Ring 0: Trust Domain may allow information disclosure. System software adversary with a privileged user combined with a high complexity attack may enable data exposure. This result may potentially occur via local access when attack requirements are present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (high), integrity (none) and availability (none) of the vulnerable system, resulting in subsequent system confidentiality (high), integrity (none) and availability (none) impacts. |
| Hardware logic contains race conditions for some 3rd Gen Intel(R) Xeon(R) Scalable Processors within Ring 3: unprivileged software may allow a denial of service. Unprivileged software adversary with an authenticated user combined with a high complexity attack may enable denial of service. This result may potentially occur via local access when attack requirements are not present with special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (none) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (high) impacts. |
| Insertion of sensitive information into log file in the subsystem for the Intel(R) AMT and Intel(R) Standard Manageability may allow an information disclosure. Network adversary with a privileged user combined with a high complexity attack may enable data exposure. This result may potentially occur via network access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (high), integrity (none) and availability (none) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| Improper input validation in some firmware for some Intel(R) Active Management Technology (Intel(R) AMT) and some Intel(R) Standard Manageability may allow a denial of service. Network adversary with an unauthenticated user combined with a low complexity attack may enable denial of service. This result may potentially occur via network access when attack requirements are present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (none) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| Protection mechanism failure for some Intel Extension for TensorFlow software before version 2.15.0.3 within Ring 3: User Applications may allow an escalation of privilege. System software adversary with a privileged user combined with a low complexity attack may enable escalation of privilege. This result may potentially occur via local access when attack requirements are present without special internal knowledge and requires passive user interaction. The potential vulnerability may impact the confidentiality (high), integrity (high) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| Browserslist is a configuration tool for sharing target browsers and Node.js versions between front-end tools. Prior to 4.28.7, normalizeStats() in node.js, reached unconditionally through getStat() and loadStat() on every browserslist() call, processes untrusted browserslist-stats.json, opts.stats, and CLI --stats data with an unguarded for...in loop and plain-object bracket access and assignment, allowing inherited Object.prototype keys including __proto__, toString, valueOf, constructor, hasOwnProperty, and isPrototypeOf to cause an uncaught TypeError or modify the prototype of the returned normalized object. This issue is fixed in version 4.28.7. |