In the Linux kernel, the following vulnerability has been resolved:
vfio/nvgrace-gpu: Use a core-only open_device in fallback mode
When the ACPI memory properties are missing or the C2C link is down, the
device is exposed through nvgrace_gpu_pci_core_ops. That table opens
through nvgrace_gpu_open_device() but closes through
vfio_pci_core_close_device(), so open and close are not symmetric.
nvgrace_gpu_open_device() registers nvdev->usemem for poison handling
unconditionally. In fallback mode usemem.memlength is zero, and
register_pfn_address_space() inserts a node covering [0, ULONG_MAX].
Nothing removes it: a second open fails with -EBUSY, and once the device
is unbound the node outlives the nvdev that contains it. The next open
after a rebind reports:
BUG: KASAN: slab-use-after-free in interval_tree_iter_first+0x209/0x310
Read of size 8 at addr ffff88800894aa30 by task nvgrace_repro/203
Call Trace:
<TASK>
dump_stack_lvl+0x5d/0x80
print_report+0x153/0x4c6
kasan_report+0xe4/0x1a0
interval_tree_iter_first+0x209/0x310
register_pfn_address_space+0x97/0x100
nvgrace_gpu_open_device+0x21c/0x730
vfio_df_open+0x213/0x520
vfio_df_ioctl_bind_iommufd+0x3e8/0x6e0
vfio_device_fops_unl_ioctl+0x782/0x1570
__x64_sys_ioctl+0x13c/0x1c0
do_syscall_64+0x106/0x630
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
Allocated by task 188:
...
_vfio_alloc_device+0x3a/0x500
nvgrace_gpu_probe+0xcb/0x660
local_pci_probe+0xcf/0x170
...
Freed by task 188:
...
kfree+0x20d/0x600
device_release+0xcf/0x250
kobject_put+0x152/0x2f0
pci_device_remove+0xb0/0x1c0
device_release_driver_internal+0x38d/0x540
unbind_store+0xde/0x100
...
Give the fallback table its own open_device that only calls
vfio_pci_core_enable() and vfio_pci_core_finish_enable(), the
counterpart of vfio_pci_core_close_device(). Fallback mode then never
touches the nvgrace memory regions, as Alex suggested.
This should be safe because the fallback table uses the vfio-pci core
read, write and mmap handlers, so nothing there uses the state
nvgrace_gpu_open_device() sets up. The one visible difference is that a
fallback open no longer fails when BAR0 cannot be mapped, which matches
vfio-pci.
vfio/nvgrace-gpu: Use a core-only open_device in fallback mode
When the ACPI memory properties are missing or the C2C link is down, the
device is exposed through nvgrace_gpu_pci_core_ops. That table opens
through nvgrace_gpu_open_device() but closes through
vfio_pci_core_close_device(), so open and close are not symmetric.
nvgrace_gpu_open_device() registers nvdev->usemem for poison handling
unconditionally. In fallback mode usemem.memlength is zero, and
register_pfn_address_space() inserts a node covering [0, ULONG_MAX].
Nothing removes it: a second open fails with -EBUSY, and once the device
is unbound the node outlives the nvdev that contains it. The next open
after a rebind reports:
BUG: KASAN: slab-use-after-free in interval_tree_iter_first+0x209/0x310
Read of size 8 at addr ffff88800894aa30 by task nvgrace_repro/203
Call Trace:
<TASK>
dump_stack_lvl+0x5d/0x80
print_report+0x153/0x4c6
kasan_report+0xe4/0x1a0
interval_tree_iter_first+0x209/0x310
register_pfn_address_space+0x97/0x100
nvgrace_gpu_open_device+0x21c/0x730
vfio_df_open+0x213/0x520
vfio_df_ioctl_bind_iommufd+0x3e8/0x6e0
vfio_device_fops_unl_ioctl+0x782/0x1570
__x64_sys_ioctl+0x13c/0x1c0
do_syscall_64+0x106/0x630
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
Allocated by task 188:
...
_vfio_alloc_device+0x3a/0x500
nvgrace_gpu_probe+0xcb/0x660
local_pci_probe+0xcf/0x170
...
Freed by task 188:
...
kfree+0x20d/0x600
device_release+0xcf/0x250
kobject_put+0x152/0x2f0
pci_device_remove+0xb0/0x1c0
device_release_driver_internal+0x38d/0x540
unbind_store+0xde/0x100
...
Give the fallback table its own open_device that only calls
vfio_pci_core_enable() and vfio_pci_core_finish_enable(), the
counterpart of vfio_pci_core_close_device(). Fallback mode then never
touches the nvgrace memory regions, as Alex suggested.
This should be safe because the fallback table uses the vfio-pci core
read, write and mmap handlers, so nothing there uses the state
nvgrace_gpu_open_device() sets up. The one visible difference is that a
fallback open no longer fails when BAR0 cannot be mapped, which matches
vfio-pci.
Metrics
Affected Vendors & Products
Advisories
No advisories yet.
Fixes
Solution
No solution given by the vendor.
Workaround
No workaround given by the vendor.
References
History
Thu, 19 Nov 2026 15:00:00 +0000
| Type | Values Removed | Values Added |
|---|---|---|
| Description | In the Linux kernel, the following vulnerability has been resolved: vfio/nvgrace-gpu: Use a core-only open_device in fallback mode When the ACPI memory properties are missing or the C2C link is down, the device is exposed through nvgrace_gpu_pci_core_ops. That table opens through nvgrace_gpu_open_device() but closes through vfio_pci_core_close_device(), so open and close are not symmetric. nvgrace_gpu_open_device() registers nvdev->usemem for poison handling unconditionally. In fallback mode usemem.memlength is zero, and register_pfn_address_space() inserts a node covering [0, ULONG_MAX]. Nothing removes it: a second open fails with -EBUSY, and once the device is unbound the node outlives the nvdev that contains it. The next open after a rebind reports: BUG: KASAN: slab-use-after-free in interval_tree_iter_first+0x209/0x310 Read of size 8 at addr ffff88800894aa30 by task nvgrace_repro/203 Call Trace: <TASK> dump_stack_lvl+0x5d/0x80 print_report+0x153/0x4c6 kasan_report+0xe4/0x1a0 interval_tree_iter_first+0x209/0x310 register_pfn_address_space+0x97/0x100 nvgrace_gpu_open_device+0x21c/0x730 vfio_df_open+0x213/0x520 vfio_df_ioctl_bind_iommufd+0x3e8/0x6e0 vfio_device_fops_unl_ioctl+0x782/0x1570 __x64_sys_ioctl+0x13c/0x1c0 do_syscall_64+0x106/0x630 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> Allocated by task 188: ... _vfio_alloc_device+0x3a/0x500 nvgrace_gpu_probe+0xcb/0x660 local_pci_probe+0xcf/0x170 ... Freed by task 188: ... kfree+0x20d/0x600 device_release+0xcf/0x250 kobject_put+0x152/0x2f0 pci_device_remove+0xb0/0x1c0 device_release_driver_internal+0x38d/0x540 unbind_store+0xde/0x100 ... Give the fallback table its own open_device that only calls vfio_pci_core_enable() and vfio_pci_core_finish_enable(), the counterpart of vfio_pci_core_close_device(). Fallback mode then never touches the nvgrace memory regions, as Alex suggested. This should be safe because the fallback table uses the vfio-pci core read, write and mmap handlers, so nothing there uses the state nvgrace_gpu_open_device() sets up. The one visible difference is that a fallback open no longer fails when BAR0 cannot be mapped, which matches vfio-pci. | |
| Title | vfio/nvgrace-gpu: Use a core-only open_device in fallback mode | |
| First Time appeared |
Linux
Linux linux Kernel |
|
| CPEs | cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:* | |
| Vendors & Products |
Linux
Linux linux Kernel |
|
| References |
|
Projects
Sign in to view the affected projects.
Status: PUBLISHED
Assigner: Linux
Published:
Updated: 2026-11-19T14:41:46.677Z
Reserved: 2026-09-25T10:25:14.416Z
Link: CVE-2026-99450
No data.
Status : Received
Published: 2026-11-19T15:17:58.833
Modified: 2026-11-19T15:17:58.833
Link: CVE-2026-99450
No data.
OpenCVE Enrichment
No data.
Weaknesses
No weakness.