{"dataType": "CVE_RECORD", "dataVersion": "5.2", "cveMetadata": {"cveId": "CVE-2026-98127", "assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "state": "PUBLISHED", "assignerShortName": "Linux", "dateReserved": "2026-09-25T10:25:14.318Z", "datePublished": "2026-09-25T10:36:08.406Z", "dateUpdated": "2026-10-21T12:54:38.540Z"}, "containers": {"cna": {"providerMetadata": {"orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "shortName": "Linux", "dateUpdated": "2026-10-21T12:54:38.540Z"}, "descriptions": [{"lang": "en", "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nsmb/client: validate new EOF for insert range\n\nsmb3_insert_range() does not check if the new file size\n(i_size + len) is valid. This allows FALLOC_FL_INSERT_RANGE to bypass\nRLIMIT_FSIZE, exceed s_maxbytes, or produce a size outside the loff_t\nrange.\n\nUse check_add_overflow() to calculate the new EOF. Validate it with\ninode_newsize_ok() before modifying the file.\n\nReproducer, using a file on a CIFS mount:\n\n\tbash -c '\n\t\tFILE=/mnt/cifs/repro\n\n\t\ttrap \"\" SIGXFSZ\n\t\tulimit -f 3072\t\t# RLIMIT_FSIZE = 3 MiB\n\n\t\t# A regular write is stopped at 3 MiB.\n\t\tdd if=/dev/zero of=\"$FILE\" bs=1M count=4 status=none\n\t\tstat -c \"size after write: %s\" \"$FILE\"\n\n\t\t# Insert 2 MiB into a 2 MiB file.\n\t\ttruncate -s 2M \"$FILE\"\n\t\tfallocate -i -o 0 -l 2M \"$FILE\"\n\t\tstat -c \"size after insert: %s\" \"$FILE\"\n\t'\n\nBefore this change, the regular write stops at the 3 MiB limit, but\ninsert range grows the file to 4 MiB:\n\n\tdd: error writing '/mnt/cifs/repro': File too large\n\tsize after write: 3145728\n\tsize after insert: 4194304\n\nAfter this change, insert range also fails at the limit and leaves the\n2 MiB file unchanged:\n\n\tdd: error writing '/mnt/cifs/repro': File too large\n\tsize after write: 3145728\n\tfallocate: fallocate failed: File too large\n\tsize after insert: 2097152"}], "affected": [{"product": "Linux", "vendor": "Linux", "defaultStatus": "unaffected", "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", "programFiles": ["fs/smb/client/smb2ops.c"], "versions": [{"version": "7fe6fe95b936084dce6eedcc2cccadf96eafae73", "lessThan": "b7f2e33d9f5db7b8e6e5e0a5a93d0c5e31870356", "status": "affected", "versionType": "git"}, {"version": "7fe6fe95b936084dce6eedcc2cccadf96eafae73", "lessThan": "7c2c69045aa76ccaa7f16f1478eb312130ce4951", "status": "affected", "versionType": "git"}, {"version": "7fe6fe95b936084dce6eedcc2cccadf96eafae73", "lessThan": "bc7602b9082ef195d913c4c16fa9853dd262333e", "status": "affected", "versionType": "git"}, {"version": "7fe6fe95b936084dce6eedcc2cccadf96eafae73", "lessThan": "f8cbfe3a3fcee7d991fd223f660f3e5df13221cf", "status": "affected", "versionType": "git"}, {"version": "7fe6fe95b936084dce6eedcc2cccadf96eafae73", "lessThan": "1519dc88c87f5346dae0464d7d6da1b6bf1f6e8e", "status": "affected", "versionType": "git"}]}, {"product": "Linux", "vendor": "Linux", "defaultStatus": "affected", "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", "programFiles": ["fs/smb/client/smb2ops.c"], "versions": [{"version": "5.13", "status": "affected"}, {"version": "0", "lessThan": "5.13", "status": "unaffected", "versionType": "semver"}, {"version": "6.6.160", "lessThanOrEqual": "6.6.*", "status": "unaffected", "versionType": "semver"}, {"version": "6.12.111", "lessThanOrEqual": "6.12.*", "status": "unaffected", "versionType": "semver"}, {"version": "6.18.53", "lessThanOrEqual": "6.18.*", "status": "unaffected", "versionType": "semver"}, {"version": "7.2.7", "lessThanOrEqual": "7.2.*", "status": "unaffected", "versionType": "semver"}, {"version": "7.3", "lessThanOrEqual": "*", "status": "unaffected", "versionType": "original_commit_for_fix"}]}], "cpeApplicability": [{"nodes": [{"operator": "OR", "negate": false, "cpeMatch": [{"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "5.13", "versionEndExcluding": "6.6.160"}, {"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "5.13", "versionEndExcluding": "6.12.111"}, {"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "5.13", "versionEndExcluding": "6.18.53"}, {"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "5.13", "versionEndExcluding": "7.2.7"}, {"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "5.13", "versionEndExcluding": "7.3"}]}]}], "references": [{"url": "https://git.kernel.org/stable/c/b7f2e33d9f5db7b8e6e5e0a5a93d0c5e31870356"}, {"url": "https://git.kernel.org/stable/c/7c2c69045aa76ccaa7f16f1478eb312130ce4951"}, {"url": "https://git.kernel.org/stable/c/bc7602b9082ef195d913c4c16fa9853dd262333e"}, {"url": "https://git.kernel.org/stable/c/f8cbfe3a3fcee7d991fd223f660f3e5df13221cf"}, {"url": "https://git.kernel.org/stable/c/1519dc88c87f5346dae0464d7d6da1b6bf1f6e8e"}], "title": "smb/client: validate new EOF for insert range", "x_generator": {"engine": "bippy-1.2.0"}}}}

{}

{"affected": [{"affectedData": [{"defaultStatus": "unaffected", "product": "Linux", "programFiles": ["fs/smb/client/smb2ops.c"], "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", "vendor": "Linux", "versions": [{"lessThan": "b7f2e33d9f5db7b8e6e5e0a5a93d0c5e31870356", "status": "affected", "version": "7fe6fe95b936084dce6eedcc2cccadf96eafae73", "versionType": "git"}, {"lessThan": "7c2c69045aa76ccaa7f16f1478eb312130ce4951", "status": "affected", "version": "7fe6fe95b936084dce6eedcc2cccadf96eafae73", "versionType": "git"}, {"lessThan": "bc7602b9082ef195d913c4c16fa9853dd262333e", "status": "affected", "version": "7fe6fe95b936084dce6eedcc2cccadf96eafae73", "versionType": "git"}, {"lessThan": "f8cbfe3a3fcee7d991fd223f660f3e5df13221cf", "status": "affected", "version": "7fe6fe95b936084dce6eedcc2cccadf96eafae73", "versionType": "git"}, {"lessThan": "1519dc88c87f5346dae0464d7d6da1b6bf1f6e8e", "status": "affected", "version": "7fe6fe95b936084dce6eedcc2cccadf96eafae73", "versionType": "git"}]}, {"defaultStatus": "affected", "product": "Linux", "programFiles": ["fs/smb/client/smb2ops.c"], "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", "vendor": "Linux", "versions": [{"status": "affected", "version": "5.13"}, {"lessThan": "5.13", "status": "unaffected", "version": "0", "versionType": "semver"}, {"lessThanOrEqual": "6.6.*", "status": "unaffected", "version": "6.6.160", "versionType": "semver"}, {"lessThanOrEqual": "6.12.*", "status": "unaffected", "version": "6.12.111", "versionType": "semver"}, {"lessThanOrEqual": "6.18.*", "status": "unaffected", "version": "6.18.53", "versionType": "semver"}, {"lessThanOrEqual": "7.2.*", "status": "unaffected", "version": "7.2.7", "versionType": "semver"}, {"lessThanOrEqual": "*", "status": "unaffected", "version": "7.3", "versionType": "original_commit_for_fix"}]}], "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"}], "configurations": [{"nodes": [{"cpeMatch": [{"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "matchCriteriaId": "C3EC3EBA-ACF8-4116-A6A8-4C27AA6014E2", "versionEndExcluding": "6.6.160", "versionStartIncluding": "5.13", "vulnerable": true}, {"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "matchCriteriaId": "47BC31C9-3D9E-4B96-B5F8-291D6AD55D81", "versionEndExcluding": "6.12.111", "versionStartIncluding": "6.7", "vulnerable": true}, {"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "matchCriteriaId": "7561AABB-6D5A-4324-BC66-C6C6B012AFD8", "versionEndExcluding": "6.18.53", "versionStartIncluding": "6.13", "vulnerable": true}, {"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "matchCriteriaId": "19917B2D-B4B2-4416-A482-9C7C4929A921", "versionEndExcluding": "7.2.7", "versionStartIncluding": "6.19", "vulnerable": true}, {"criteria": "cpe:2.3:o:linux:linux_kernel:7.3:rc1:*:*:*:*:*:*", "matchCriteriaId": "11E35E1B-5DB4-4AB9-9706-CD73B799EADF", "vulnerable": true}], "negate": false, "operator": "OR"}]}], "cveTags": [], "descriptions": [{"lang": "en", "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nsmb/client: validate new EOF for insert range\n\nsmb3_insert_range() does not check if the new file size\n(i_size + len) is valid. This allows FALLOC_FL_INSERT_RANGE to bypass\nRLIMIT_FSIZE, exceed s_maxbytes, or produce a size outside the loff_t\nrange.\n\nUse check_add_overflow() to calculate the new EOF. Validate it with\ninode_newsize_ok() before modifying the file.\n\nReproducer, using a file on a CIFS mount:\n\n\tbash -c '\n\t\tFILE=/mnt/cifs/repro\n\n\t\ttrap \"\" SIGXFSZ\n\t\tulimit -f 3072\t\t# RLIMIT_FSIZE = 3 MiB\n\n\t\t# A regular write is stopped at 3 MiB.\n\t\tdd if=/dev/zero of=\"$FILE\" bs=1M count=4 status=none\n\t\tstat -c \"size after write: %s\" \"$FILE\"\n\n\t\t# Insert 2 MiB into a 2 MiB file.\n\t\ttruncate -s 2M \"$FILE\"\n\t\tfallocate -i -o 0 -l 2M \"$FILE\"\n\t\tstat -c \"size after insert: %s\" \"$FILE\"\n\t'\n\nBefore this change, the regular write stops at the 3 MiB limit, but\ninsert range grows the file to 4 MiB:\n\n\tdd: error writing '/mnt/cifs/repro': File too large\n\tsize after write: 3145728\n\tsize after insert: 4194304\n\nAfter this change, insert range also fails at the limit and leaves the\n2 MiB file unchanged:\n\n\tdd: error writing '/mnt/cifs/repro': File too large\n\tsize after write: 3145728\n\tfallocate: fallocate failed: File too large\n\tsize after insert: 2097152"}], "id": "CVE-2026-98127", "lastModified": "2026-10-22T15:55:04.660", "metrics": {"cvssMetricV31": [{"cvssData": {"attackComplexity": "LOW", "attackVector": "LOCAL", "availabilityImpact": "HIGH", "baseScore": 5.5, "baseSeverity": "MEDIUM", "confidentialityImpact": "NONE", "integrityImpact": "NONE", "privilegesRequired": "LOW", "scope": "UNCHANGED", "userInteraction": "NONE", "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H", "version": "3.1"}, "exploitabilityScore": 1.8, "impactScore": 3.6, "source": "[email protected]", "type": "Primary"}]}, "published": "2026-09-25T11:17:44.050", "references": [{"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "tags": ["Patch"], "url": "https://git.kernel.org/stable/c/1519dc88c87f5346dae0464d7d6da1b6bf1f6e8e"}, {"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "tags": ["Patch"], "url": "https://git.kernel.org/stable/c/7c2c69045aa76ccaa7f16f1478eb312130ce4951"}, {"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "tags": ["Patch"], "url": "https://git.kernel.org/stable/c/b7f2e33d9f5db7b8e6e5e0a5a93d0c5e31870356"}, {"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "tags": ["Patch"], "url": "https://git.kernel.org/stable/c/bc7602b9082ef195d913c4c16fa9853dd262333e"}, {"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "tags": ["Patch"], "url": "https://git.kernel.org/stable/c/f8cbfe3a3fcee7d991fd223f660f3e5df13221cf"}], "sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "vulnStatus": "Analyzed", "weaknesses": [{"description": [{"lang": "en", "value": "CWE-190"}], "source": "[email protected]", "type": "Primary"}]}

{"bugzilla": {"description": "kernel: smb/client: validate new EOF for insert range", "id": "2541317", "url": "https://bugzilla.redhat.com/show_bug.cgi?id=2541317"}, "csaw": false, "cvss3": {"cvss3_base_score": "5.5", "cvss3_scoring_vector": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H", "status": "draft"}, "cwe": "CWE-1284", "details": ["In the Linux kernel, the following vulnerability has been resolved:\nsmb/client: validate new EOF for insert range\nsmb3_insert_range() does not check if the new file size\n(i_size + len) is valid. This allows FALLOC_FL_INSERT_RANGE to bypass\nRLIMIT_FSIZE, exceed s_maxbytes, or produce a size outside the loff_t\nrange.\nUse check_add_overflow() to calculate the new EOF. Validate it with\ninode_newsize_ok() before modifying the file.\nReproducer, using a file on a CIFS mount:\nbash -c '\nFILE=/mnt/cifs/repro\ntrap \"\" SIGXFSZ\nulimit -f 3072# RLIMIT_FSIZE = 3 MiB\n# A regular write is stopped at 3 MiB.\ndd if=/dev/zero of=\"$FILE\" bs=1M count=4 status=none\nstat -c \"size after write: %s\" \"$FILE\"\n# Insert 2 MiB into a 2 MiB file.\ntruncate -s 2M \"$FILE\"\nfallocate -i -o 0 -l 2M \"$FILE\"\nstat -c \"size after insert: %s\" \"$FILE\"\n'\nBefore this change, the regular write stops at the 3 MiB limit, but\ninsert range grows the file to 4 MiB:\ndd: error writing '/mnt/cifs/repro': File too large\nsize after write: 3145728\nsize after insert: 4194304\nAfter this change, insert range also fails at the limit and leaves the\n2 MiB file unchanged:\ndd: error writing '/mnt/cifs/repro': File too large\nsize after write: 3145728\nfallocate: fallocate failed: File too large\nsize after insert: 2097152", "A flaw was found in the Linux kernel's SMB client. The smb3_insert_range function does not properly validate the resulting file size when inserting a range of space into an existing file on a mounted share. A local user can exploit this flaw using a fallocate request to bypass configured file size limits (RLIMIT_FSIZE) or exceed maximum filesystem boundaries."], "name": "CVE-2026-98127", "package_state": [{"cpe": "cpe:/o:redhat:enterprise_linux:10", "fix_state": "Fix deferred", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 10"}, {"cpe": "cpe:/o:redhat:enterprise_linux:6", "fix_state": "Not affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 6"}, {"cpe": "cpe:/o:redhat:enterprise_linux:7", "fix_state": "Not affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 7"}, {"cpe": "cpe:/o:redhat:enterprise_linux:7", "fix_state": "Not affected", "package_name": "kernel-rt", "product_name": "Red Hat Enterprise Linux 7"}, {"cpe": "cpe:/o:redhat:enterprise_linux:8", "fix_state": "Not affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 8"}, {"cpe": "cpe:/o:redhat:enterprise_linux:8", "fix_state": "Not affected", "package_name": "kernel-rt", "product_name": "Red Hat Enterprise Linux 8"}, {"cpe": "cpe:/o:redhat:enterprise_linux:9", "fix_state": "Fix deferred", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 9"}, {"cpe": "cpe:/o:redhat:enterprise_linux:9", "fix_state": "Fix deferred", "package_name": "kernel-rt", "product_name": "Red Hat Enterprise Linux 9"}, {"cpe": "cpe:/a:redhat:openshift:4", "fix_state": "Not affected", "package_name": "openshift/ose-rhel-coreos-8", "product_name": "Red Hat OpenShift Container Platform 4"}, {"cpe": "cpe:/a:redhat:openshift:4", "fix_state": "Fix deferred", "package_name": "openshift/ose-rhel-coreos-9", "product_name": "Red Hat OpenShift Container Platform 4"}], "public_date": "2026-09-25T00:00:00Z", "references": ["https://www.cve.org/CVERecord?id=CVE-2026-98127\nhttps://nvd.nist.gov/vuln/detail/CVE-2026-98127\nhttps://git.kernel.org/pub/scm/linux/security/vulns.git/plain/cve/published/2026/CVE-2026-98127.mbox"], "threat_severity": "Low"}

{"affected": [{"configurations": [{"platform": null, "status": "affected", "versions": {"scheme": "code_commit", "value": "[7fe6fe95b936084dce6eedcc2cccadf96eafae73,7c2c69045aa76ccaa7f16f1478eb312130ce4951)"}}, {"platform": null, "status": "affected", "versions": {"scheme": "code_commit", "value": "[7fe6fe95b936084dce6eedcc2cccadf96eafae73,bc7602b9082ef195d913c4c16fa9853dd262333e)"}}, {"platform": null, "status": "affected", "versions": {"scheme": "code_commit", "value": "[7fe6fe95b936084dce6eedcc2cccadf96eafae73,f8cbfe3a3fcee7d991fd223f660f3e5df13221cf)"}}, {"platform": null, "status": "affected", "versions": {"scheme": "code_commit", "value": "[7fe6fe95b936084dce6eedcc2cccadf96eafae73,1519dc88c87f5346dae0464d7d6da1b6bf1f6e8e)"}}], "enrichment": {"confidence": 99.0, "confidence_source": "inferred", "scores": [{"score": 99.0, "source": "inferred"}, {"score": 100.0, "source": "matching"}]}, "original": {"product": "Linux", "source": "cna", "vendor": "Linux"}, "product": "linux_kernel", "vendor": "linux"}, {"configurations": [{"platform": null, "status": "affected", "versions": {"scheme": "generic", "value": "5.13"}}, {"platform": null, "status": "unaffected", "versions": {"scheme": "generic", "value": "[0,5.13)"}}, {"platform": null, "status": "unaffected", "versions": {"scheme": "generic", "value": "[6.12.111,6.12.*]"}}, {"platform": null, "status": "unaffected", "versions": {"scheme": "generic", "value": "[6.18.53,6.18.*]"}}, {"platform": null, "status": "unaffected", "versions": {"scheme": "generic", "value": "[7.2.7,7.2.*]"}}, {"platform": null, "status": "unaffected", "versions": {"scheme": "generic", "value": "[7.3-rc2,*]"}}], "enrichment": {"confidence": 99.0, "confidence_source": "inferred", "scores": [{"score": 99.0, "source": "inferred"}, {"score": 100.0, "source": "matching"}]}, "original": {"product": "Linux", "source": "cna", "vendor": "Linux"}, "product": "linux_kernel", "vendor": "linux"}], "created": "2026-09-25T12:30:08.709361+00:00", "updated": "2026-10-23T00:15:13.787832+00:00", "vendors": ["linux", "linux$PRODUCT$linux_kernel"]}