In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: at91_udc: drain polled-VBUS timer/work before udc is freed
In polled-VBUS mode (board.vbus_pin && board.vbus_polled), probe arms a
self-restarting cycle: at91_vbus_timer() schedules vbus_timer_work, and
at91_vbus_timer_work() calls at91_vbus_update() and re-arms the timer via
mod_timer(). Both recover the same udc through container_of and dereference
it on every iteration.
Neither teardown path cancels this cycle. udc is devm-allocated, so it is
freed after at91udc_remove() returns, and is likewise freed when probe
fails and devres runs. A timer callback or work item that is pending or
running at either point dereferences the freed udc.
Add at91_udc_shutdown_vbus_timer() and call it from at91udc_remove() and
from the usb_add_gadget_udc() failure path in probe; the remaining probe
error paths fail before the timer is armed. timer_shutdown_sync() waits
for a running callback and clears timer->function, which makes the work
handler's mod_timer() a permanent no-op; cancel_work_sync() then drains
any pending or running work whose re-arm attempt now does nothing. The
timer must be shut down first, since cancelling the work alone would let
the timer re-queue it. The guard mirrors probe: in IRQ mode the timer and
work_struct are never initialized.
This does not require a fault; a normal driver unbind can interleave with
an already queued work item.
This issue was found by an in-house static analysis tool.
usb: gadget: at91_udc: drain polled-VBUS timer/work before udc is freed
In polled-VBUS mode (board.vbus_pin && board.vbus_polled), probe arms a
self-restarting cycle: at91_vbus_timer() schedules vbus_timer_work, and
at91_vbus_timer_work() calls at91_vbus_update() and re-arms the timer via
mod_timer(). Both recover the same udc through container_of and dereference
it on every iteration.
Neither teardown path cancels this cycle. udc is devm-allocated, so it is
freed after at91udc_remove() returns, and is likewise freed when probe
fails and devres runs. A timer callback or work item that is pending or
running at either point dereferences the freed udc.
Add at91_udc_shutdown_vbus_timer() and call it from at91udc_remove() and
from the usb_add_gadget_udc() failure path in probe; the remaining probe
error paths fail before the timer is armed. timer_shutdown_sync() waits
for a running callback and clears timer->function, which makes the work
handler's mod_timer() a permanent no-op; cancel_work_sync() then drains
any pending or running work whose re-arm attempt now does nothing. The
timer must be shut down first, since cancelling the work alone would let
the timer re-queue it. The guard mirrors probe: in IRQ mode the timer and
work_struct are never initialized.
This does not require a fault; a normal driver unbind can interleave with
an already queued work item.
This issue was found by an in-house static analysis tool.
Metrics
Affected Vendors & Products
No data.
No data.
OpenCVE Enrichment is a feature of OpenCVE that uses AI to automatically link vendors and products to CVEs. Learn more on GitHub.
No data.
Advisories
No advisories yet.
Fixes
Solution
No solution given by the vendor.
Workaround
No workaround given by the vendor.
References
History
Sat, 12 Sep 2026 00:15:00 +0000
| Type | Values Removed | Values Added |
|---|---|---|
| Weaknesses | CWE-825 | |
| References |
| |
| Metrics |
threat_severity
|
cvssV3_1
|
Fri, 11 Sep 2026 23:45:00 +0000
| Type | Values Removed | Values Added |
|---|---|---|
| Description | In the Linux kernel, the following vulnerability has been resolved: usb: gadget: at91_udc: drain polled-VBUS timer/work before udc is freed In polled-VBUS mode (board.vbus_pin && board.vbus_polled), probe arms a self-restarting cycle: at91_vbus_timer() schedules vbus_timer_work, and at91_vbus_timer_work() calls at91_vbus_update() and re-arms the timer via mod_timer(). Both recover the same udc through container_of and dereference it on every iteration. Neither teardown path cancels this cycle. udc is devm-allocated, so it is freed after at91udc_remove() returns, and is likewise freed when probe fails and devres runs. A timer callback or work item that is pending or running at either point dereferences the freed udc. Add at91_udc_shutdown_vbus_timer() and call it from at91udc_remove() and from the usb_add_gadget_udc() failure path in probe; the remaining probe error paths fail before the timer is armed. timer_shutdown_sync() waits for a running callback and clears timer->function, which makes the work handler's mod_timer() a permanent no-op; cancel_work_sync() then drains any pending or running work whose re-arm attempt now does nothing. The timer must be shut down first, since cancelling the work alone would let the timer re-queue it. The guard mirrors probe: in IRQ mode the timer and work_struct are never initialized. This does not require a fault; a normal driver unbind can interleave with an already queued work item. This issue was found by an in-house static analysis tool. | |
| Title | usb: gadget: at91_udc: drain polled-VBUS timer/work before udc is freed | |
| First Time appeared |
Linux
Linux linux Kernel |
|
| CPEs | cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:* | |
| Vendors & Products |
Linux
Linux linux Kernel |
|
| References |
|
Projects
Sign in to view the affected projects.
MITRE
Status: PUBLISHED
Assigner: Linux
Published:
Updated: 2026-09-11T19:46:45.898Z
Reserved: 2026-09-11T19:38:34.761Z
Link: CVE-2026-89738
Vulnrichment
No data.
NVD
Status : Received
Published: 2026-09-11T20:20:04.357
Modified: 2026-09-11T20:20:04.357
Link: CVE-2026-89738
Redhat
OpenCVE Enrichment
Updated: 2026-09-12T14:15:16Z
Weaknesses