The Bluetooth Mesh Access-layer delayable message queue in subsys/bluetooth/mesh/delayable_msg.c shares three intrusive lists (busy_ctx, free_ctx, free_chunks) and one k_work_delayable between two cooperative threads with no synchronization: bt_mesh_delayable_msg_manage() runs on the Bluetooth host RX thread, while delayable_msg_handler() runs on the system workqueue. Both block while the lists are in an intermediate state — the enqueuer in bt_rand(), both in bt_mesh_access_send() — which lets the other context observe torn state. delayable_msg_handler() used the result of sys_slist_get() on busy_ctx without a NULL check, and allocate_delayable_msg_ctx() tested sys_slist_is_empty() and then assumed a separate sys_slist_get() would succeed.
Because CONFIG_BT_MESH_ACCESS_DELAYABLE_MSG and CONFIG_BT_MESH_ACCESS_DELAYABLE_MSG_CTX_ENABLED default to y, every model response to a received mesh message is parked on this queue, so the enqueuer runs as a direct consequence of inbound traffic. A peer that can get access-layer messages accepted by a model (it must hold the NetKey and a bound AppKey, so a legitimate or compromised network member) controls the arrival rate, the size of the elicited responses and the destination address, and thereby controls occupancy of the 4-entry context pool and the 40-entry chunk pool. Exhausting the chunk pool forces bt_mesh_delayable_msg_manage() down the purge path, which sends and releases the only queued message and leaves busy_ctx empty while the delayable work item is still armed; if the enqueuer then yields, the handler runs against the empty list.
The result is a read-modify-write through a NULL-based pointer (pending_msg->fired_time += 10) at a fixed low address on the system workqueue thread. On typical targets that faults, aborting the system workqueue thread — which stops all workqueue-driven functionality, including the mesh timing machinery — or resetting the node, so the impact is loss of availability of the affected node. The write value and address are fixed and no attacker-controlled length or index is involved, so this is not exploitable for memory corruption or code execution. The same unsynchronized window also allowed one message context to be selected and released by two contexts at once, producing duplicated transmissions, duplicated send-completion callbacks and crossed chunk ownership.
The fix serializes every list mutation with a k_spinlock that is never held across a blocking call, makes push_msg_from_delayable_msgs() detach the queue head atomically so a message being sent is on no list, removes the unchecked sys_slist_get() from delayable_msg_handler(), and drops any message that reaches the front of the queue while the stack is suspended or reset.
Because CONFIG_BT_MESH_ACCESS_DELAYABLE_MSG and CONFIG_BT_MESH_ACCESS_DELAYABLE_MSG_CTX_ENABLED default to y, every model response to a received mesh message is parked on this queue, so the enqueuer runs as a direct consequence of inbound traffic. A peer that can get access-layer messages accepted by a model (it must hold the NetKey and a bound AppKey, so a legitimate or compromised network member) controls the arrival rate, the size of the elicited responses and the destination address, and thereby controls occupancy of the 4-entry context pool and the 40-entry chunk pool. Exhausting the chunk pool forces bt_mesh_delayable_msg_manage() down the purge path, which sends and releases the only queued message and leaves busy_ctx empty while the delayable work item is still armed; if the enqueuer then yields, the handler runs against the empty list.
The result is a read-modify-write through a NULL-based pointer (pending_msg->fired_time += 10) at a fixed low address on the system workqueue thread. On typical targets that faults, aborting the system workqueue thread — which stops all workqueue-driven functionality, including the mesh timing machinery — or resetting the node, so the impact is loss of availability of the affected node. The write value and address are fixed and no attacker-controlled length or index is involved, so this is not exploitable for memory corruption or code execution. The same unsynchronized window also allowed one message context to be selected and released by two contexts at once, producing duplicated transmissions, duplicated send-completion callbacks and crossed chunk ownership.
The fix serializes every list mutation with a k_spinlock that is never held across a blocking call, makes push_msg_from_delayable_msgs() detach the queue head atomically so a message being sent is on no list, removes the unchecked sys_slist_get() from delayable_msg_handler(), and drops any message that reaches the front of the queue while the stack is suspended or reset.
Metrics
Affected Vendors & Products
No data.
No data.
OpenCVE Enrichment is a feature of OpenCVE that uses AI to automatically link vendors and products to CVEs. Learn more on GitHub.
| Vendors | Products |
|---|---|
|
Zephyrproject
Subscribe
|
Zephyr
Subscribe
|
Advisories
No advisories yet.
Fixes
Solution
No solution given by the vendor.
Workaround
No workaround given by the vendor.
References
History
Tue, 13 Oct 2026 02:15:00 +0000
| Type | Values Removed | Values Added |
|---|---|---|
| First Time appeared |
Zephyrproject
Zephyrproject zephyr |
|
| Vendors & Products |
Zephyrproject
Zephyrproject zephyr |
Mon, 12 Oct 2026 23:30:00 +0000
| Type | Values Removed | Values Added |
|---|---|---|
| Description | The Bluetooth Mesh Access-layer delayable message queue in subsys/bluetooth/mesh/delayable_msg.c shares three intrusive lists (busy_ctx, free_ctx, free_chunks) and one k_work_delayable between two cooperative threads with no synchronization: bt_mesh_delayable_msg_manage() runs on the Bluetooth host RX thread, while delayable_msg_handler() runs on the system workqueue. Both block while the lists are in an intermediate state — the enqueuer in bt_rand(), both in bt_mesh_access_send() — which lets the other context observe torn state. delayable_msg_handler() used the result of sys_slist_get() on busy_ctx without a NULL check, and allocate_delayable_msg_ctx() tested sys_slist_is_empty() and then assumed a separate sys_slist_get() would succeed. Because CONFIG_BT_MESH_ACCESS_DELAYABLE_MSG and CONFIG_BT_MESH_ACCESS_DELAYABLE_MSG_CTX_ENABLED default to y, every model response to a received mesh message is parked on this queue, so the enqueuer runs as a direct consequence of inbound traffic. A peer that can get access-layer messages accepted by a model (it must hold the NetKey and a bound AppKey, so a legitimate or compromised network member) controls the arrival rate, the size of the elicited responses and the destination address, and thereby controls occupancy of the 4-entry context pool and the 40-entry chunk pool. Exhausting the chunk pool forces bt_mesh_delayable_msg_manage() down the purge path, which sends and releases the only queued message and leaves busy_ctx empty while the delayable work item is still armed; if the enqueuer then yields, the handler runs against the empty list. The result is a read-modify-write through a NULL-based pointer (pending_msg->fired_time += 10) at a fixed low address on the system workqueue thread. On typical targets that faults, aborting the system workqueue thread — which stops all workqueue-driven functionality, including the mesh timing machinery — or resetting the node, so the impact is loss of availability of the affected node. The write value and address are fixed and no attacker-controlled length or index is involved, so this is not exploitable for memory corruption or code execution. The same unsynchronized window also allowed one message context to be selected and released by two contexts at once, producing duplicated transmissions, duplicated send-completion callbacks and crossed chunk ownership. The fix serializes every list mutation with a k_spinlock that is never held across a blocking call, makes push_msg_from_delayable_msgs() detach the queue head atomically so a message being sent is on no list, removes the unchecked sys_slist_get() from delayable_msg_handler(), and drops any message that reaches the front of the queue while the stack is suspended or reset. | |
| Title | Bluetooth Mesh delayable message queue: unsynchronized list access leads to NULL pointer dereference | |
| Weaknesses | CWE-362 | |
| References |
| |
| Metrics |
cvssV3_1
|
Projects
Sign in to view the affected projects.
MITRE
Status: PUBLISHED
Assigner: zephyr
Published:
Updated: 2026-10-12T23:19:53.113Z
Reserved: 2026-08-15T13:31:16.656Z
Link: CVE-2026-19936
Vulnrichment
No data.
NVD
Status : Received
Published: 2026-10-13T00:17:01.397
Modified: 2026-10-13T00:17:01.397
Link: CVE-2026-19936
Redhat
No data.
OpenCVE Enrichment
Updated: 2026-10-13T02:00:08Z
Weaknesses