| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Net::CIDR::Set versions before 0.23 for Perl allow memory exhaustion and malformed set ranges via unbounded IPv6 prefix lengths.
The _encode method accepts any prefix length matching `(0|[1-9][0-9]*)` and passes it to _width2bits(), which builds the mask as `'1' x ($width + 8)`, one character per bit. The _inc() method then unpacks the packed mask into a Perl array of one scalar per byte, so the prefix length alone sets the allocation size: `::/100000000` builds a 100 MB string and a 12.5 million element array. The value being tested is parsed, not just the configured ranges: contains() builds a set from its argument, and _guess_coder() tries the IPv4 coder and then the IPv6 coder, so an IPv4-only set expands an oversized IPv6 prefix length before the mixed address width check rejects it.
Any caller that passes untrusted input to contains() or add() can exhaust process memory. A prefix length above 128 is also stored as a range that does not match the requested block: 2001:db8::/129 stringifies back unchanged, contains() of its own base address returns false, and removing it from a set drops the base address while the set still prints as covering it. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: serial: io_ti: fix heap overflow in get_manuf_info()
get_manuf_info() reads le16_to_cpu(rom_desc->Size) bytes from the
device I2C EEPROM into a buffer allocated with kmalloc_obj(), which
is sizeof(struct edge_ti_manuf_descriptor) = 10 bytes.
The Size field comes from the device and is only validated (in
check_i2c_image()) to make sure the descriptor fits within
TI_MAX_I2C_SIZE (16384 bytes), not against the destination buffer size.
A malicious USB device can therefore set Size to any value up to 16377,
causing a heap overflow of up to 16367 bytes when plugged into a host
running this driver.
valid_csum() is called after read_rom() and also iterates
buffer[0..Size-1], compounding the out-of-bounds access.
Fix by rejecting descriptors with unexpected length before calling
read_rom().
[ johan: amend commit message; also check for short descriptors ] |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Fix buffer overflow in SDMA queue checkpoint/restore on GFX11
The v11 MQD manager incorrectly assigned the CP-compute variants of
checkpoint_mqd/restore_mqd for KFD_MQD_TYPE_SDMA queues. These functions
use sizeof(struct v11_compute_mqd) (2048 bytes) instead of sizeof(struct
v11_sdma_mqd) (512 bytes), causing a 1536-byte overflow.
During CRIU checkpoint of an SDMA queue on Navi3x:
- checkpoint_mqd() reads 2048 bytes from a 512-byte SDMA MQD buffer,
leaking 1536 bytes of adjacent GTT memory to userspace
During CRIU restore:
- restore_mqd() writes 2048 bytes into a 512-byte SDMA MQD buffer,
corrupting 1536 bytes of adjacent GTT memory (often the ring buffer
or neighboring MQDs)
This is a copy-paste regression unique to v11. All other ASIC backends
(cik, vi, v9, v10, v12) correctly use the SDMA-specific variants.
Add checkpoint_mqd_sdma() and restore_mqd_sdma() functions that properly
handle the smaller v11_sdma_mqd structure, matching the pattern used in
other MQD managers.
(cherry picked from commit 6fa41db7ffdec97d62433adf03b7b9b759af8c2c) |
| A command injection vulnerability in certain affected NETGEAR Nighthawk
devices allows a network-adjacent attacker with the ability to intercept
and modify local network traffic (attacker in the middle) to compromise
the confidentiality and integrity of the affected device. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mvpp2: limit XDP frame size to the RX buffer
mvpp2 has short and long BM pools, and short pool buffers can be smaller
than PAGE_SIZE. The XDP path nevertheless initializes every xdp_buff with
PAGE_SIZE as frame size.
XDP helpers use frame_sz to validate tail growth and to derive the hard
end of the data area. Advertising PAGE_SIZE for short buffers can let
bpf_xdp_adjust_tail() grow a packet past the real allocation, corrupting
memory or later tripping skb tailroom checks.
Initialize the XDP buffer with bm_pool->frag_size so XDP tailroom matches
the actual buffer backing the packet. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ivpu: Add bounds checks for firmware log indices
Add validation that read and write indices in the firmware log buffer
are within valid bounds (< data_size) before using them. If
out-of-bounds indices are encountered (from firmware), clamp them to
safe values instead of proceeding with invalid offsets.
This prevents potential out-of-bounds buffer access when firmware
supplies invalid log indices. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/core: Validate cpu_id against nr_cpu_ids in DMAH alloc
The cpu_id attribute supplied by user space through
UVERBS_ATTR_ALLOC_DMAH_CPU_ID is passed directly to cpumask_test_cpu()
without first verifying that the value is within the valid CPU range.
Passing such untrusted data to cpumask_test_cpu() may lead to an
out-of-bounds read of the underlying cpumask bitmap: the helper expands
to a test_bit() that indexes the bitmap by cpu_id / BITS_PER_LONG with
no bound check.
In addition, on kernels built with CONFIG_DEBUG_PER_CPU_MAPS it trips
the WARN_ON_ONCE() in cpumask_check(); combined with panic_on_warn this
turns a bad user input into a machine reboot.
Reject any cpu_id that is not smaller than nr_cpu_ids with -EINVAL
before it is used.
Reported by Smatch. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: serial: io_ti: fix heap overflow in build_i2c_fw_hdr()
build_i2c_fw_hdr() allocates a fixed-size buffer of
(16*1024 - 512) + sizeof(struct ti_i2c_firmware_rec) bytes, then
copies le16_to_cpu(img_header->Length) bytes into it without
validating that Length fits within the available space after the
firmware record header.
img_header->Length is a __le16 from the firmware file and can be
up to 65535. check_fw_sanity() validates the total firmware size
but not img_header->Length specifically.
Fix by rejecting images where img_header->Length exceeds the
available destination space. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ivpu: Add bounds check for firmware runtime memory
Validate that the firmware runtime memory specified in the image
header is properly aligned and sized to hold the firmware image.
This prevents errors during memory allocation and image transfer. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix NULL deref and buffer over-read in SDP debugfs
[Why & How]
dp_sdp_message_debugfs_write() dereferences connector->base.state->crtc
without checking for NULL. A connector can be connected but not bound to
any CRTC (e.g. after hot-plug before the next atomic commit), causing a
kernel crash when writing to the sdp_message debugfs node.
The function also ignores the user-provided size argument and always
passes 36 bytes to copy_from_user(), reading past the user buffer when
size < 36.
Fix both issues by:
- Returning -ENODEV when connector->base.state or state->crtc is NULL
- Clamping write_size to min(size, sizeof(data))
(cherry picked from commit 6ab4c36a522842ff70474a1c0af2e40e50fc8300) |
| A maliciously crafted GIF file, when parsed through Autodesk 3ds Max, can cause a Stack-Based Buffer Overflow vulnerability. A malicious actor can leverage this vulnerability to execute arbitrary code in the context of the current process. |
| n8n is an open source workflow automation platform. From version 0.187.0 to before 1.120.3, a command injection vulnerability was identified in n8n’s community package installation functionality. The issue allowed authenticated users with administrative permissions to execute arbitrary system commands on the n8n host under specific conditions. This issue has been patched in version 1.120.3. |
| Micron Crucial MX500 Series Solid State Drives M3CR046 is vulnerable to Buffer Overflow, which can be triggered by sending specially crafted ATA packets from the host to the drive controller. NOTE: The supplier states that this vulnerability was fully remediated in December 2024 and that updated firmware is available through Crucial’s official support page. |
| FreePBX Endpoint Manager is a module for managing telephony endpoints in FreePBX systems. In versions 17.0.2.36 and above before 17.0.3, the filestore module within the Administrative interface is vulnerable to a post-authentication command injection by an authenticated known user via the testconnection -> check_ssh_connect() function. An attacker can leverage this vulnerability to obtain remote access to the system as an asterisk user. This issue is fixed in version 17.0.3. |
| When a highly-privileged, authenticated attacker attempts to initialize the rSeries FIPS module using a password with special shell metacharacters, arbitrary system commands may be executed, and the FIPS hardware security module (HSM) may fail to initialize. A successful exploit can allow the attacker to cross a security boundary. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| When running in Appliance mode, a highly privileged authenticated attacker with access to SCP and SFTP may be able to bypass Appliance mode restrictions using undisclosed commands. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| Dokploy is a free, self-hostable Platform as a Service (PaaS). In versions prior to 0.26.6, a critical command injection vulnerability exists in Dokploy's WebSocket endpoint `/docker-container-terminal`. The `containerId` and `activeWay` parameters are directly interpolated into shell commands without sanitization, allowing authenticated attackers to execute arbitrary commands on the host server. Version 0.26.6 fixes the issue. |
| n8n is an open source workflow automation platform. Prior to versions 1.123.10 and 2.5.0, vulnerabilities in the Git node allowed authenticated users with permission to create or modify workflows to execute arbitrary system commands or read arbitrary files on the n8n host. This issue has been patched in versions 1.123.10 and 2.5.0. |
| A maliciously crafted RGB file, when parsed through Autodesk 3ds Max, can force a Memory Corruption vulnerability. A malicious actor can leverage this vulnerability to execute arbitrary code in the context of the current process. |
| A maliciously crafted USD file, when loaded or imported into Autodesk Arnold or Autodesk 3ds Max, can force an Out-of-Bounds Write vulnerability. A malicious actor can leverage this vulnerability to execute arbitrary code in the context of the current process. |
