| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Action Mailbox routes incoming emails to controller-like mailboxes for processing in Rails. Prior to 8.1.4.1 and 8.0.5.2, the Action Mailbox Mailgun ingress authenticates a request with an HMAC of the timestamp and token parameters concatenated without a separator, and ActionMailbox::Ingresses::Mailgun::InboundEmailsController::Authenticator#recent? rejects only timestamps more than 2 minutes in the past. Because the signature does not fix the boundary between the two values, a captured signed request can be presented with a timestamp far in the future, which the ingress then accepts indefinitely. An attacker who obtains one signed Mailgun webhook request, but not the signing key, could submit arbitrary inbound email that Action Mailbox processes as genuine, possibly leading to forged messages attributed to the sender of the attacker's choosing. Applications that receive inbound email through the Action Mailbox Mailgun ingress are affected. This issue is fixed in versions 8.1.4.1 and 8.0.5.2. |
| On affected platforms running Arista EOS with IPsec AutoVPN Feature configured with dynamic paths, the configured IPsec replay window may not be applied as expected. As a result, IPsec anti-replay protection may be silently inactive even when it has been configured via an SA policy, contrary to the operator's expectation. This issue does not allow decryption of the affected IPsec traffic, but it may allow replay of previously valid protected traffic. |
| Authentication bypass by capture-replay in SQL Server allows an unauthorized attacker to disclose information over a network. |
| Authentication bypass by capture-replay in the MigTD for the Intel(R) TDX Migration Trust Domain (MigTD) within Ring 0: Hypervisor may allow an escalation of privilege. System software adversary with a privileged user combined with a low complexity attack may enable escalation of privilege. This result may potentially occur via local access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (high), integrity (high) and availability (none) of the vulnerable system, resulting in subsequent system confidentiality (high), integrity (high) and availability (none) impacts. |
| A vulnerability has been identified in armeria-saml prior to 1.41.1, where bearer assertions are not enforced for one-time use, allowing replay of previously consumed assertion IDs within their validity period. |
| Due to improper RFC protocol validation in the SAP Kernel used by the Application Server ABAP of SAP NetWeaver and ABAP Platform, an unauthenticated attacker can send a crafted RFC request that exploits logical errors in memory management, leading to memory corruption. This could lead to a high impact on confidentiality and integrity with low impact on availability of the application. |
| SuperTokens Core is an open source authentication server. From 11.3.0 until 11.3.8, 11.4.8, 12.0.11, 12.1.2, 12.2.1, and 12.3.1, SAML.handleCallback does not consume RelayState, record assertion identifiers, or enforce Response.InResponseTo. In the SP-initiated flow, an attacker who obtains a legitimately issued, still-valid SAML response and its matching RelayState can resubmit the pair to /recipe/saml/callback before the assertion's NotOnOrAfter time; in the IdP-initiated flow, the assertion can be replayed without RelayState. The missing Response.InResponseTo check also permits an in-progress login to be completed with an assertion for a different identity and fails to enforce allowIDPInitiatedLogin=false. The callback does not validate Destination or SubjectConfirmationData Recipient and NotOnOrAfter, and each accepted callback mints a fresh, independently redeemable authorization code carrying the captured user's identity. This issue is fixed in versions 11.3.8, 11.4.8, 12.0.11, 12.1.2, 12.2.1, and 12.3.1. |
| GPUStack is an open-source GPU cluster manager for AI model serving and GPU instance provisioning. From 0.7.1 until 2.2.2, the /auth/saml/callback endpoint decoded SAML XML, used its NameID and attributes to resolve or provision a user, and minted a gpustack_session JWT without calling OneLogin_Saml2_Auth.process_response to verify the signature, issuer, audience, destination, or time conditions. Any network client could submit an identity for an existing user, including an administrator, or provision a new non-administrator account, even when SAML was not configured. Response and Assertion identifiers were not consumed, so captured signed responses could also be replayed. This issue is fixed in version 2.2.2. |
| WPO365 | LOGIN (wpo365-login) plugin before version 45.2 contains an authentication bypass by capture-replay vulnerability caused by a non-functional anti-replay check in Saml2_Service::check_message_id(), which never persists processed SAML message IDs to the wpo365_saml_message_ids transient due to a logic error that returns before saving. Attackers who capture a validly-signed SAMLResponse can replay it to the ACS endpoint repeatedly within its assertion validity window to log in as the victim, including administrators, without detection since the duplicate message ID check never triggers. |
| Authentication Bypass by Capture-replay in ExternalLoginKeysManager in Apache OFBiz 24.09 before 24.09.08 on all platforms allows a remote unauthenticated attacker who captures a live externalLoginKey value to obtain a complete, cookie-free, reusable session as the user who issued it, in every webapp that user can reach, because checkExternalLoginKey runs as a global preprocessor ahead of both the CSRF and authentication checks and accepts the key as a bearer credential that is never bound to a client, never expires, and is not invalidated after use, while the framework itself both appends live keys to every cross-webapp link it renders and, via WidgetWorker's unvalidated inter-app link target, lets an authenticated user's key be attached to an attacker-chosen absolute URL and delivered directly to the attacker's own server. Users are recommended to upgrade to version 24.09.08, which fixes this issue. |
| Eaton easyE4 uses a static nonce during authentication, which could allow an unauthenticated attacker with access to captured authentication traffic to replay a valid authentication exchange and gain unauthorized access to the device. |
| A missing authentication vulnerability in Fireware OS's FireCluster state synchronization feature allows an unauthenticated attacker positioned on the cluster synchronization network segment to force premature VPN tunnel termination by sending crafted cluster synchronization traffic. |
| An Authentication Bypass by Capture-replay vulnerability in WatchGuard AuthPoint Gateway allows an attacker who has observed a legitimate request between AuthPoint Gateway components to replay it and perform unauthorized administrative actions, including disrupting authentication services. |
| Psono Server CE & EE versions 3.1.0 through 7.2.3 did not consume a stored WebAuthn challenge after assertion verification. An unauthenticated remote attacker who possessed the user's password and one captured valid WebAuthn assertion could replay that assertion with separate login tokens while the stored challenge remained unchanged, bypassing the WebAuthn second factor. The attack required capture of a valid assertion and did not itself disclose plaintext secrets. |
| A flaw was found in Rancher Manager. The SAML assertion replay protection introduced by the fix for CVE-2026-44946 recorded consumed assertion IDs in a per-process cache, so each replica only detected replays that reached the same pod. In a high-availability deployment, an attacker holding a captured assertion could replay it once against every other replica to obtain additional authenticated sessions as the victim.
This issue affects Rancher: before 2.15.1. |
| A vulnerability has been identified in Mendix SAML (Mendix 10 compatible) (All versions < V4.2.4), Mendix SAML (Mendix 11 compatible) (All versions < V4.2.4), Mendix SAML (Mendix 9 compatible) (All versions < V3.6.29). Affected versions of the module do not properly protect against SAML assertion replay in IdP-initiated authentication flows. This could allow unauthenticated remote attackers to gain unauthorized access to the application by replaying a valid SAML response. |
| YesWiki from 4.6.2 before 4.7.0 lacks replay protection in HttpSignatureService::verifySignature(), which never validates the Date header or tracks seen signatures. Attackers who capture a signed request to the /api/forms/{formId}/actor/inbox endpoint can replay it later to re-execute Delete, Update, Follow, or Undo actions. |
| OpenReception's appointment booking software provides an end-to-end encrypted appointment booking platform. Prior to version 2.2.1, an attacker who captures a pending invite token can replay it to obtain a passkey-registration credential and register their own passkey on the invited account, taking control of that account. For a staff or tenant-admin invite this yields access to the tenant context tied to that account. This issue has been patched in version 2.2.1. |
| Coder before 2.29.21, 2.30.0 before 2.34.12, 2.35.0 before 2.35.9, 2.36.0 before 2.36.7, and 2.37.0 before 2.37.4 does not validate the audience claim of GCE instance-identity JWTs at the POST /api/v2/workspaceagents/google-instance-identity endpoint. Attackers who obtain an unexpired format=full identity token minted for another relying party can replay it to obtain that workspace agent's session token, which remains valid until the workspace's next build. |
| Snipe-IT before 8.5.0 contains a SAML assertion replay vulnerability that allows attackers to reuse captured assertions by exploiting a non-atomic nonce check in the SAML acs handler. Attackers can send concurrent POST requests to /saml/acs with one captured assertion to obtain multiple authenticated victim sessions that evade IdP-driven revocation. |
