| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. From 8.0.0 until 8.0.6, DNS-over-HTTP/2 processing in rust/src/http2/http2.rs retains previously processed HTTP/2 DATA frame contents instead of clearing the internal buffer. Multiple DATA frames with the EndOfStream flag set can grow the buffer to its 65 KiB limit while causing all prior contents to be processed again, producing quadratic CPU complexity, degraded packet processing, loss of monitoring visibility, or denial of service. This issue is fixed in version 8.0.6. |
| Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Prior to 7.0.17 and 8.0.6, src/flow-hash.c can treat an IPv4 and IPv6 flow as equal without comparing the IP family when their raw address words, ports, protocol, VLAN, recursion level, live device, and hash bucket align. An IPv6 packet can therefore reuse IPv4 flow state or the reverse, causing incorrect flowbit state, detection bypass, or IP-only bypass. This issue is fixed in versions 8.0.6 and 7.0.17. |
| Incorrect permission assignment for critical resource in M365 Copilot allows an authorized attacker to disclose information over a network. |
| Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. From 8.0.0 until 8.0.6, the DHCP parser in rust/src/dhcp/dhcp.rs creates stateless transactions without recording their packet direction with AppLayerTxData::for_direction(), so a sensor that observes only one direction cannot mark the unseen direction inspected or free completed transactions. The RDP parser in rust/src/rdp/rdp.rs has the same direction-state defect. The per-flow transaction list can grow without bound and cleanup repeatedly scans it, causing increasing CPU and memory consumption and eventual denial of service. This issue is fixed in version 8.0.6. |
| Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Prior to 7.0.17 and 8.0.6, HTTP SWF decompression with the non-default swf-decompression feature and an unsafe decompress-depth can use the configured depth when allocating in src/util-file-decompression.c instead of limiting the allocation to the Flash file's actual data requirement. A crafted SWF response can therefore trigger an integer-related heap buffer overflow and crash Suricata; the default disabled feature and default depth are not affected. This issue is fixed in versions 8.0.6 and 7.0.17. |
| Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. From 8.0.0 until 8.0.6, src/datasets-context-json.c assumes that a configured JSON or NDJSON dataset value_key resolves to a string. A trusted or untrusted dataset or rule feed containing a non-string value for that key can cause a NULL pointer dereference during startup, configuration test mode, or rule reload, crashing Suricata before traffic processing. This issue is fixed in version 8.0.6. |
| Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. From 8.0.0 until 8.0.6, the SMTP MIME parser in rust/src/mime/smtp.rs does not fully reset state when processing Content-Type: message/rfc822 encapsulation. An outer MIME part's encoding or filename state can leak into the inner message, allowing crafted mail to evade detections based on file.data, file.name, or extracted URLs when SMTP MIME decoding is enabled. This issue is fixed in version 8.0.6. |
| Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. From 8.0.0 until 8.0.6, AppLayerParserSetTransactionInspectId() in src/app-layer-parser.c uses an inverted guard and marks only already-inspected transactions as inspected. On flows passed by a pass rule or pass-the-flow exception policy, detection is skipped, so completed transactions remain unmarked, are never freed, and are repeatedly rescanned. The per-flow list can grow without bound with quadratic cleanup cost, causing CPU and memory exhaustion. This issue is fixed in version 8.0.6. |
| Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. From 8.0.5 until 8.0.6, the FTP parser in src/app-layer-ftp.c can continue allocating transactions after app-layer.protocols.ftp.max-tx is reached while processing one large chunk of FTP command data. The oversized transaction list is repeatedly processed with quadratic complexity after the too_many_transactions event, allowing crafted FTP traffic to degrade packet processing, reduce monitoring visibility, or cause denial of service. This issue is fixed in version 8.0.6. |
| Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Prior to 7.0.17 and 8.0.6, the SMB parser can retain force-completed transactions on flows where Suricata sees payload in only one direction, including async-oneside flows, because cleanup waits for inspection in the unseen direction. The transaction creation paths in rust/src/smb can exceed the intended SMB_MAX_TX bound, and cleanup repeatedly scans the growing list. Sustained one-directional SMB traffic can therefore cause unbounded per-flow state and CPU and memory exhaustion. This issue is fixed in versions 8.0.6 and 7.0.17. |
| Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. From 8.0.0 until 8.0.6, the SIP parser in rust/src/sip/parser.rs stores request and response body lengths in 16-bit fields. A SIP body larger than 65,536 bytes can truncate the length and prevent frame:request.body or frame:response.body from exposing the complete body to inspection, allowing content in the omitted portion to evade frame-based detection. This issue is fixed in version 8.0.6. |
| Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Prior to 8.0.6, the FTP parser in src/app-layer-ftp.c treats a RETR or STOR command sent before PORT or PASV negotiation as a fatal application-layer error instead of a recoverable protocol event. The fatal state disables FTP application-layer parsing for the remainder of the TCP flow, so later commands can evade parser-dependent rules and logging; IPS mode instead drops the flow. This issue is fixed in version 8.0.6. |
| Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. From 8.0.0 until 8.0.6, a locally supplied detection rule that combines frame inspection without content and a transformed match without content can make src/detect-engine-prefilter.c select multiple non-prefilter frame engines while preparing signatures for non-prefilter inspection. Loading the crafted rule, including in test mode, can trigger a heap buffer overflow and crash Suricata; network traffic alone cannot reach the flaw. This issue is fixed in version 8.0.6. |
| Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Starting in version 8.0.0 and prior to version 8.0.5, Suricata's IP defragmentation code could deadlock when processing fragmented traffic containing an encapsulated tunnel protocol whose payload is itself fragmented. Version 8.0.5 contains a fix. No known workarounds are available. |
| A vulnerability was identified in deepseek-ai deepseek-harness up to 0.1.5-rc.3. Impacted is an unknown function of the file packages/e2b/e2b/src/index.ts of the component dsh. The manipulation of the argument E2B_API_KEY leads to reliance on untrusted inputs in a security decision. Local access is required to approach this attack. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in Innotim Software, Telecommunications and Consultancy Trade Ltd. Co. Logsign SIEM allows Path Traversal.
This issue affects Logsign SIEM: from 6.4.101 before 6.4.117. |
| Langflow 1.0.16 before 1.12.0 and 0.0.94 before 1.12.0 contain an unsafe eval() vulnerability in schema.py that allows authenticated attackers to achieve code execution by placing a Python object with a malicious __repr__ method into component input options lists. The eval() sink is triggered when a component is converted into a LangChain tool via ComponentToolkit.get_tools(), including during custom component saves through the API, by interpolating options into a Literal type string that is passed directly to eval() without safe evaluation controls. |
| Predictable exact value from previous values vulnerability in Citrix NetScaler ADC and Citrix NetScaler Gateway.
This issue affects ADC: before 14.1-73.37, before 13.1-64.23, before 14.1-73.37 FIPS, and before 13.1.37.279 FIPS and NDcPP; Gateway: before 14.1-73.37 and before 13.1-64.23. |
| The strncasecmp function in the GNU C Library 2.24 and later optimized for the Power8 architecture may read one byte beyond the input size limit, which may crash a program when that byte is not readable.
This condition may happen when the input strings to the strncasecmp function are attacker controlled in an application and they match all the way up to the edge of their page and the neighbouring page is either not mapped or is not readable. |
| A user who can supply bundle content to a repository referenced by a GitRepo resource, for example through Git push access, or through permission to create or modify a GitRepo, can cause SUSE Rancher Fleet to read files from the filesystem of the environment that processes the bundle and include their contents in the generated Bundle resource. This can expose configuration or credential material that the user has no Kubernetes RBAC permission to read, including Helm registry credentials made available to the bundle-processing job when per-path Helm credentials are configured.
This affects Fleet 0.16 before 0.16.2, 0.15 before 0.15.7, 0.14 before 0.14.11, 0.13 before 0.13.16, 0.12 before 0.12.20 and potentially older unsupported versions. |
