| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw was found in the OIDC implementation of Keycloak, specifically within the Device Authorization Grant flow. This component allows devices with limited input capabilities to obtain security tokens. The issue occurs because the flow fails to check the minimum authentication level required by a client configuration. This allows an attacker who has stolen a user's password to bypass mandatory multi-factor authentication and gain unauthorized access to the Keycloak Admin REST API. |
| A heap buffer overflow vulnerability in the FileMaker Server database engine block parsing routine allowed a maliciously crafted .fmp12 database file to cause memory corruption, potentially leading to arbitrary code execution. This vulnerability is addressed in FileMaker Server version 26.0.3. |
| Improper neutralization of input during web page generation ('cross-site scripting') vulnerability in Akıllı Ticaret Software Technologies Ltd. Co. E-Commerce Pack allows Reflected XSS.
This issue affects E-Commerce Pack: through 2026-10-06. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: clear free space tree creation state on rebuild failure
btrfs_rebuild_free_space_tree() sets BTRFS_FS_CREATING_FREE_SPACE_TREE
before rebuilding the free space tree. Several error paths return
without clearing this flag.
The transaction restart failure path can leave the flag set on a live
filesystem, causing delayed reference processing to be skipped. Clear it
on all free space tree rebuild failure paths. Keep
BTRFS_FS_FREE_SPACE_TREE_UNTRUSTED set, since a failed rebuild leaves
the free space tree untrusted. Callers must fall back to extent-tree
caching. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bcmasp: fix tx_spb_ring_full() checking same slot cnt times
The loop initialised next_index from intf->tx_spb_index on every
iteration, so incr_ring() always produced the same result and only
one slot was ever tested. Move the initialisation before the loop
so each iteration advances next_index and the function correctly
checks that cnt consecutive descriptor slots are available before
allowing a new transmission. |
| QloApps through 1.7.0 contains an authorization bypass vulnerability in AdminProductsController::ajaxProcessBulkUpdateRooms that allows hotel-restricted back-office employees to modify rooms of other hotels. Attackers can submit foreign room IDs in the id_rooms parameter to change status, floor, comments, or inactive dates, disrupting availability and bookings. |
| PLANKA 2.2.0 through 2.2.1 fails to limit incorrect TOTP codes submitted to POST /api/access-tokens/verify-totp, allowing attackers to brute force two-factor authentication codes. Attackers who know a user's password can reuse the ten-minute pending token to guess six-digit codes until one succeeds, obtaining a full access token. |
| In the Linux kernel, the following vulnerability has been resolved:
mlxsw: spectrum_ptp: Fix napi_gro_receive() call from GC workqueue context
Currently mlxsw_sp1_ptp_ht_gc_collect() is run from the PTP
garbage-collection workqueue, rather than the NAPI poll context. For any
unmatched PTP entries carrying an SKB, it calls
mlxsw_sp1_ptp_unmatched_finish() -> mlxsw_sp1_ptp_packet_finish(). For
ingress packets, this calls mlxsw_sp_rx_listener_no_mark_func(). The end
of that function is the following:
skb->protocol = eth_type_trans(skb, skb->dev);
napi_gro_receive(mlxsw_skb_cb(skb)->rx_md_info.napi, skb);
The napi pointer is one that was placed in the SKB control block when the
trapped packet was received in the NAPI context. Later, when the GC reaps
the unmatched entry (up to MLXSW_SP1_PTP_HT_GC_TIMEOUT later), the call to
napi_gro_receive() mutates the NAPI instance's GRO list, which is unsafe
if the poll is running concurrently on another CPU.
In mlxsw_sp1_ptp_ht_gc_collect(), local_bh_disable() is called to prevent
softirq processing, but this only applies to the local CPU. Additionally,
its comment is stale. It states that mlxsw_sp1_ptp_unmatched_finish()
invokes netif_receive_skb(). This has not been accurate since the
referenced commit; this patch makes that comment accurate again.
mlxsw_pci_napi_devs_init() calls netif_threaded_enable() on the NAPI RX
net_device without any conditions. The NAPI instance's poll, which may be
running concurrent to the GC, is running as an independently-scheduled
kthread which may be on a different CPU. The call to local_bh_disable()
does not guard against this.
If a tx-timestamp timeout produces an unmatched entry (which can be easily
reproduced by running ptp4l and waiting for a port to reach the
UNCALIBRATED/SLAVE state) while the owning NAPI thread is in the middle of
a poll on another CPU, both sides mutate the GRO list concurrently, as
shown below:
[39.846] port 1 (swp1): MASTER to UNCALIBRATED on RS_SLAVE
list_add corruption. next->prev should be prev (ffff8d620faf4138), but was ffff8d624150f700. (next=ffff8d620faf4138).
kernel BUG at lib/list_debug.c:29!
Oops: invalid opcode: 0000 [#1] SMP PTI
CPU: 1 UID: 0 PID: 539 Comm: napi/mlxsw_rx-0 Not tainted 6.18.48 #1-NixOS PREEMPT(lazy)
Hardware name: Mellanox Technologies Ltd. MSN2410/VMOD0001, BIOS 4.6.5 09/13/2018
RIP: 0010:__list_add_valid_or_report+0x79/0xb0
RSP: 0018:ffffcdf8c0f27c08 EFLAGS: 00010246
RAX: 0000000000000075 RBX: ffff8d624150fd00 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff8d6315d1e540
RBP: ffff8d620faf4070 R08: 0000000000000000 R09: 00000000ffffdfff
R10: ffffffffa5c60fe0 R11: ffffcdf8c0f27ab8 R12: 0000000000000003
R13: 000000000000003d R14: 00000000000001bc R15: 0000000000000001
FS: 0000000000000000(0000) GS:ffff8d636f63f000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000562689a60c24 CR3: 000000015f224004 CR4: 00000000001726f0
Call Trace:
<TASK>
gro_receive_skb+0xee/0x230
mlxsw_sp1_ptp_got_packet+0x61/0x140 [mlxsw_spectrum]
mlxsw_core_skb_receive+0xdf/0x1b0 [mlxsw_core]
mlxsw_pci_napi_poll_cq_rx+0x780/0x9d0 [mlxsw_pci]
__napi_poll+0x31/0x1e0
napi_threaded_poll_loop+0x16b/0x1c0
napi_threaded_poll+0x71/0xa0
kthread+0xfb/0x260
ret_from_fork+0x22d/0x260
ret_from_fork_asm+0x1a/0x30
</TASK>
Kernel panic - not syncing: Fatal exception in interrupt
The machinery that leads to this kernel panic has not been changed between
6.18.48 and mainline.
This patch adds an ingress-delivery helper for the PTP packet_finish()
path that calls netif_receive_skb() instead of napi_gro_receive().
netif_receive_skb(), unlike napi_gro_receive(), can be called from outside
of the NAPI instance's poll context, which can occur at the call site for
this path. RX stats accounting and the skb->dev assignment are still
preserved; the only change is the delivery call itself.
This removes GR
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: zero extend the result of an arena 32-bit cmpxchg
bpf_convert_ctx_accesses() rewrites an atomic on an arena pointer from
BPF_STX | BPF_ATOMIC to BPF_STX | BPF_PROBE_ATOMIC, and it runs before
bpf_opt_subreg_zext_lo32_rnd_hi32().
That pass emits an explicit zero extension for a 32-bit cmpxchg even
when bpf_jit_needs_zext() is false. This is done because on some
architectures 32-bit cmpxchg requires explicit zero extension for the
dst register. E.g. on x86-64 'lock cmpxchg' does not change the %eax
if comparison is successful, while BPF semantics declare that each
operation on a 32-bit register zero extends it's upper half.
is_cmpxchg_insn() matches BPF_MODE == BPF_ATOMIC only, so an arena
cmpxchg misses said zero extension adjustment. This patch adjusts
is_cmpxchg_insn() to match BPF_PROBE_ATOMIC alongside BPF_ATOMIC. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: take commit root semaphore when iterating in mark_block_group_to_copy()
mark_block_group_to_copy() iterates over the commit root with
skip_locking=true. A concurrent transaction commit can swap and free
the commit root during iteration, causing use-after-free when
accessing extent buffers.
Fix it by using path->need_commit_sem to protect the commit root search. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: wilc1000: fix RX buffer OOB-write in wilc_wlan_handle_isr_ext()
wilc_wlan_handle_isr_ext() takes the RX transfer size from the
device-reported interrupt status register (a 15-bit field shifted left by 2,
up to 131068 bytes) and reads that many bytes from the device into
rx_buffer, which is only WILC_RX_BUFF_SIZE (96K) large. The wrap
check only handles the current offset; the size itself is never
compared against the buffer, so a bogus SDIO device can make the driver
OOB-write rx_buffer by up to ~32K with data it controls.
The oversized transfer also leaves rx_buffer_offset past the end of
the buffer, after which the unsigned wrap check stops working and
the overflow can repeat.
Drop any transfer whose size exceeds the RX buffer, acknowledging
the data interrupt and re-arming the RX engine so the bogus frame is
discarded and reception can continue. This also restores the
rx_buffer_offset <= WILC_RX_BUFF_SIZE invariant the wrap check
relies on.
This is not expected to change driver behavior in most cases:
without this check, an oversized transfer would most likely
corrupt neighboring kernel memory instead of completing anyway, and
the drop path performs the same interrupt acknowledgment and RX
engine re-arming as the normal path, so subsequent transfers are
received unaffected.
Discovered by Atuin - Automated Vulnerability Discovery Engine. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmsmac: fix UAF in brcms_free_timer()
brcms_free_timer() calls brcms_del_timer() which uses the non-synchronous
cancel_delayed_work() to cancel the timer's underlying delayed work. If
the work callback (_brcms_timer) is already running, cancel_delayed_work()
returns false without waiting, and brcms_free_timer() proceeds to kfree(t)
while the callback still accesses t through container_of().
Add an explicit cancel_delayed_work_sync() after brcms_del_timer() to
guarantee that any in-flight callback has completed before the timer
structure is freed. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/i2c: Disable IRQ on unbind
Currently, struct xe_i2c is freed before SGUnit IRQ is disabled in unbind
path, leaving a potential UAF in case I2C IRQ is hit during this small
window. Explicitly disable I2C IRQ in xe_i2c_remove() and fix this.
(cherry picked from commit 8ba5c8b8ab3fd362267c11df2cd5a90ee46f6e24) |
| Reliance on Obfuscation or Encryption of Security-Relevant Inputs without Integrity Checking vulnerability in danielberkompas cloak allows an attacker with write access to stored ciphertext to make it decrypt to a chosen value via bit flipping.
Cloak.Ciphers.AES.CTR encrypts with AES-256 in CTR mode and stores the key tag, the IV and the ciphertext with no MAC. decrypt/2 checks only the key tag and the minimum length before it returns the plaintext, and Cloak.Ciphers.Deprecated.AES.CTR decrypts the legacy format the same way. CTR is a stream cipher, so a value XORed into the stored ciphertext is XORed into the plaintext at the same offset. An attacker who can write to the encrypted store (for example through SQL injection or a compromised replica) and who knows or can guess a stored plaintext can replace it with any value of the same length. The application receives that value with no error.
This issue affects cloak: from 0.1.0-pre onward. |
| Use of Password Hash With Insufficient Computational Effort vulnerability in danielberkompas cloak_ecto and danielberkompas cloak allows an attacker who holds the hashed values and the configured secret to brute-force low-entropy plaintexts much faster than configured.
The dump/1 callback that Cloak.Ecto.PBKDF2 (Cloak.Fields.PBKDF2 in cloak before the Ecto code moved to cloak_ecto) injects into a field module calls :pbkdf2.pbkdf2/4 with config[:size] in the iteration-count position. The :iterations setting is validated but never used. With the cloak_ecto defaults (iterations: 600_000, size: 32) each hash runs 32 PBKDF2 rounds instead of 600,000, so offline guessing of values such as email addresses costs about 18,750 times less than configured.
This issue affects cloak_ecto: from 1.0.0-alpha.0 onward; cloak: from 0.7.0 before 1.0.0-alpha.0. |
| This vulnerability exists in the Schmooze app due to the use of hardcoded credentials and cryptographic keys in the client application. An unauthenticated remote attacker could exploit this vulnerability by decompiling the distributed application package and extracting the embedded credentials and cryptographic keys.
Successful exploitation of this vulnerability could allow the attacker to gain unauthorized access to backend and cloud resources and forge client requests on the targeted system. |
| In the WibuKey driver for Windows below Version 6.72, insufficient validation of user input when calculating the size of a kernel buffer could cause small amounts of data to be written outside the intended kernel buffer. This can lead to a system crash. Under unfavorable circumstances, adjacent kernel memory may be modified. |
| An open redirect vulnerability exists in the PingGateway Fragment Filter feature. This issue affects PingGateway versions 7.1.0 and later, 2023.2.0 through 2024.11.1, and 2025.3.0 through 2025.11.1. It is fixed in versions 2024.11.2, 2025.11.2, and 2026.3.0 (and later). |
| Insufficient verification of data authenticity (CWE-345) in the external OIDC login callback in Cloud Foundry UAA v4.5.0 to v79.6.0 (inclusive) allows an authenticated UAA user to bypass the OAuth authorization-code exchange and establish an authenticated external-OIDC browser session, via submitting a UAA access token or a cross-client ID token as the callback’s id_token parameter.
The issue only manifests when a UAA zone is configured with an OIDC identity provider whose issuer exactly matches that zone’s own /oauth/token endpoint (a “self-UAA” OIDC configuration). In this configuration, the callback takes a supplied id_token directly instead of requiring the authorization code exchange, and does not verify that the token was actually issued as an ID token for the specific self-OIDC relying-party client. An attacker holding any valid UAA JWT for themselves — including a plain access token with only uaa.user scope, or a valid ID token issued to an unrelated client such as cf — can present it as the callback’s id_token and be authenticated into a mapped local (“shadow”) account. Because the resulting session is not verified against the originating token’s true audience or user_id, its effective privilege depends entirely on the shadow account’s group memberships, which can include administrative scopes such as clients.write.
Exploitation requires a valid UAA user JWT, a valid browser login state for the target zone, and the presence of a self-referential OIDC provider configuration — this is not a pre-authentication vulnerability, and does not by itself grant privileges beyond those already held by the mapped shadow account. |
| Memory corruption while processing service requests. |
