| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
vlan: enforce underlying device type
Currently, VLAN devices can be created on top of non-ethernet devices.
Besides the fact that it doesn't make much sense, this also causes a
bug which leaks the address of a kernel function to usermode.
When creating a VLAN device, we initialize GARP (garp_init_applicant)
and MRP (mrp_init_applicant) for the underlying device.
As part of the initialization process, we add the multicast address of
each applicant to the underlying device, by calling dev_mc_add.
__dev_mc_add uses dev->addr_len to determine the length of the new
multicast address.
This causes an out-of-bounds read if dev->addr_len is greater than 6,
since the multicast addresses provided by GARP and MRP are only 6
bytes long.
This behaviour can be reproduced using the following commands:
ip tunnel add gretest mode ip6gre local ::1 remote ::2 dev lo
ip l set up dev gretest
ip link add link gretest name vlantest type vlan id 100
Then, the following command will display the address of garp_pdu_rcv:
ip maddr show | grep 01:80:c2:00:00:21
Fix the bug by enforcing the type of the underlying device during VLAN
device initialization. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: limit printed string from FW file
There's no guarantee here that the file is always with a
NUL-termination, so reading the string may read beyond the
end of the TLV. If that's the last TLV in the file, it can
perhaps even read beyond the end of the file buffer.
Fix that by limiting the print format to the size of the
buffer we have. |
| In the Linux kernel, the following vulnerability has been resolved:
nilfs2: fix possible int overflows in nilfs_fiemap()
Since nilfs_bmap_lookup_contig() in nilfs_fiemap() calculates its result
by being prepared to go through potentially maxblocks == INT_MAX blocks,
the value in n may experience an overflow caused by left shift of blkbits.
While it is extremely unlikely to occur, play it safe and cast right hand
expression to wider type to mitigate the issue.
Found by Linux Verification Center (linuxtesting.org) with static analysis
tool SVACE. |
| The various bson_append functions in the MongoDB C driver library may be susceptible to buffer overflow when performing operations that could result in a final BSON document which exceeds the maximum allowable size (INT32_MAX), resulting in a segmentation fault and possible application crash. This issue affected libbson versions prior to 1.27.5, MongoDB Server v8.0 versions prior to 8.0.1 and MongoDB Server v7.0 versions prior to 7.0.16 |
| corydolphin/flask-cors version 4.01 contains a vulnerability where the request path matching is case-insensitive due to the use of the `try_match` function, which is originally intended for matching hosts. This results in a mismatch because paths in URLs are case-sensitive, but the regex matching treats them as case-insensitive. This misconfiguration can lead to significant security vulnerabilities, allowing unauthorized origins to access paths meant to be restricted, resulting in data exposure and potential data leaks. |
| In the Linux kernel, the following vulnerability has been resolved:
soc: qcom: socinfo: Avoid out of bounds read of serial number
On MSM8916 devices, the serial number exposed in sysfs is constant and does
not change across individual devices. It's always:
db410c:/sys/devices/soc0$ cat serial_number
2644893864
The firmware used on MSM8916 exposes SOCINFO_VERSION(0, 8), which does not
have support for the serial_num field in the socinfo struct. There is an
existing check to avoid exposing the serial number in that case, but it's
not correct: When checking the item_size returned by SMEM, we need to make
sure the *end* of the serial_num is within bounds, instead of comparing
with the *start* offset. The serial_number currently exposed on MSM8916
devices is just an out of bounds read of whatever comes after the socinfo
struct in SMEM.
Fix this by changing offsetof() to offsetofend(), so that the size of the
field is also taken into account. |
| sqfs_search_dir in Das U-Boot before 2025.01-rc1 exhibits an off-by-one error and resultant heap memory corruption for squashfs directory listing because the path separator is not considered in a size calculation. |
| An integer overflow in sqfs_resolve_symlink in Das U-Boot before 2025.01-rc1 occurs via a crafted squashfs filesystem with an inode size of 0xffffffff, resulting in a malloc of zero and resultant memory overwrite. |
| An integer overflow in sqfs_inode_size in Das U-Boot before 2025.01-rc1 occurs in the symlink size calculation via a crafted squashfs filesystem. |
| libpoppler.so in Poppler through 24.12.0 has an out-of-bounds read vulnerability within the JBIG2Bitmap::combine function in JBIG2Stream.cc. |
| Jinja is an extensible templating engine. Prior to 3.1.5, An oversight in how the Jinja sandboxed environment detects calls to str.format allows an attacker that controls the content of a template to execute arbitrary Python code. To exploit the vulnerability, an attacker needs to control the content of a template. Whether that is the case depends on the type of application using Jinja. This vulnerability impacts users of applications which execute untrusted templates. Jinja's sandbox does catch calls to str.format and ensures they don't escape the sandbox. However, it's possible to store a reference to a malicious string's format method, then pass that to a filter that calls it. No such filters are built-in to Jinja, but could be present through custom filters in an application. After the fix, such indirect calls are also handled by the sandbox. This vulnerability is fixed in 3.1.5. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: fix potential array underflow in ucsi_ccg_sync_control()
The "command" variable can be controlled by the user via debugfs. The
worry is that if con_index is zero then "&uc->ucsi->connector[con_index
- 1]" would be an array underflow. |
| An integer underflow vulnerability exists in the HTTP server PUT request functionality of STMicroelectronics X-CUBE-AZRTOS-WL 2.0.0. A specially crafted network packet can lead to denial of service. An attacker can send a malicious packet to trigger this vulnerability.This vulnerability affects the NetX Duo Component HTTP Server implementation which can be found in x-cube-azrtos-f7\Middlewares\ST\netxduo\addons\http\nxd_http_server.c |
| An integer underflow vulnerability exists in the HTTP server PUT request functionality of STMicroelectronics X-CUBE-AZRTOS-WL 2.0.0. A specially crafted network packet can lead to denial of service. An attacker can send a malicious packet to trigger this vulnerability.This vulnerability affects the NetX Duo Web Component HTTP Server implementation which can be found in x-cube-azrtos-f7\Middlewares\ST\netxduo\addons\web\nx_web_http_server.c |
| An integer underflow vulnerability exists in the HTTP server PUT request functionality of STMicroelectronics X-CUBE-AZRTOS-WL 2.0.0. A specially crafted series of network requests can lead to denial of service. An attacker can send a sequence of malicious packets to trigger this vulnerability.This vulnerability affects the NetX Duo Component HTTP Server implementation which can be found in x-cube-azrtos-f7\Middlewares\ST\netxduo\addons\http\nxd_http_server.c |
| An integer underflow vulnerability exists in the HTTP server PUT request functionality of STMicroelectronics X-CUBE-AZRTOS-WL 2.0.0. A specially crafted series of network requests can lead to denial of service. An attacker can send a sequence of malicious packets to trigger this vulnerability.This vulnerability affects the NetX Duo Web Component HTTP Server implementation which can be found in x-cube-azrtos-f7\Middlewares\ST\netxduo\addons\web\nx_web_http_server.c |
| A stack based buffer overflow vulnerability is present in OpenPrinting ippusbxd 1.34. A specially configured printer that supports IPP-over-USB can cause a buffer overflow which can lead to a arbitrary code execution in a privileged service. To trigger the vulnerability, a malicious device would need to be connected to the vulnerable system over USB. |
| Improper neutralization of input in Nagvis before version 1.9.47 which can lead to livestatus injection |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: fixed integer types and null check locations
[why]:
issues fixed:
- comparison with wider integer type in loop condition which can cause
infinite loops
- pointer dereference before null check |
| corydolphin/flask-cors is vulnerable to log injection when the log level is set to debug. An attacker can inject fake log entries into the log file by sending a specially crafted GET request containing a CRLF sequence in the request path. This vulnerability allows attackers to corrupt log files, potentially covering tracks of other attacks, confusing log post-processing tools, and forging log entries. The issue is due to improper output neutralization for logs. |
