| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (pmbus/adm1266) cap PDIO scan in get_multiple at ADM1266_PDIO_NR
adm1266_gpio_get_multiple() iterates the PDIO portion of the
caller-supplied mask using
for_each_set_bit_from(gpio_nr, mask,
ADM1266_GPIO_NR + ADM1266_PDIO_STATUS) {
...
}
where ADM1266_PDIO_STATUS is the PMBus command code (0xE9, i.e. 233),
not the number of PDIO pins. The intended upper bound is
ADM1266_GPIO_NR + ADM1266_PDIO_NR = 25.
gpiolib hands in a mask sized for gc.ngpio (= 25 bits on this chip),
so the iteration walks find_next_bit() up to 242, reading up to 217
extra bits (a handful of unsigned-long words: four on 64-bit, seven
on 32-bit) of whatever lives past the end of the mask in the
caller's stack. Any incidental set bit in that range then drives a
set_bit(gpio_nr, bits) call that writes past the end of the
caller-supplied bits array too -- both out-of-bounds.
Substitute ADM1266_PDIO_NR for the constant so the scan stops at the
last real PDIO bit. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (pmbus/adm1266) bounce blackbox records through a protocol-sized buffer
adm1266_pmbus_block_xfer() copies the device-supplied block payload
into the caller-provided buffer using the device-supplied length:
memcpy(data_r, &msgs[1].buf[1], msgs[1].buf[0]);
The helper does not know how large data_r is and trusts the device to
return at most one record's worth of bytes. adm1266_nvmem_read_blackbox()
violates that contract: it advances read_buff inside data->dev_mem in
ADM1266_BLACKBOX_SIZE (64-byte) strides while the helper is willing to
write up to ADM1266_PMBUS_BLOCK_MAX (255) bytes. A device that returns
more than 64 bytes on the trailing record (read_buff offset 1984 in
the 2048-byte dev_mem allocation) overflows dev_mem by up to 191 bytes
before the post-call
if (ret != ADM1266_BLACKBOX_SIZE)
return -EIO;
can reject the response.
Contain the fix in the caller without changing the helper signature:
read each record into a 255-byte local bounce buffer that matches the
helper's maximum output, validate the returned length, and only then
copy exactly ADM1266_BLACKBOX_SIZE bytes into the dev_mem slot. |
| Description
NGINX JavaScript (njs) has a vulnerability in the XML module's namespace prefix list parser, reachable through the xml.exclusiveC14n() method. An unauthenticated remote attacker can trigger it when an affected NGINX configuration passes an externally controlled XML namespace prefix list to that method. Both the njs and the QuickJS (qjs) engines are affected. A crafted prefix list causes an out-of-bounds write past the end of a heap allocation. With the njs engine, which is the engine used when the js_engine directive is absent, this corrupts adjacent objects and crashes the NGINX worker. With the QuickJS engine, the same call additionally leaks the prefix list on every invocation, causing worker memory to grow across requests. The official nginxinc/nginx-saml reference implementation is affected during SAML signature verification. It reads InclusiveNamespaces/@PrefixList from an untrusted SAML message and passes it to xml.exclusiveC14n() before the signature has been verified, so a valid SAML signature is not required. A crafted SAML Response, Assertion, LogoutRequest, or LogoutResponse is sufficient. Code execution has not been demonstrated and cannot be ruled out for all platforms, as the effect of the out-of-bounds write depends on conditions beyond the attacker's control.
Impact
This vulnerability allows remote attackers to cause a denial of service on the NGINX system, either through repeatable worker restarts or through worker memory growth or possibly trigger code execution. There is no control plane exposure; this is a data plane issue only.
Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| In the Linux kernel, the following vulnerability has been resolved:
block: don't overwrite bip_vcnt in bio_integrity_copy_user()
bio_integrity_add_page() already sets bip_vcnt to 1 for the bounce
segment. Overwriting it with nr_vecs breaks bip_vcnt <= bip_max_vcnt
on WRITE (bip_max_vcnt is 1), so the gap-merge checks in block/blk.h
read past the bip_vec[] flex array. On READ the read is in bounds
but lands on a saved user bvec instead of the bounce.
The line was added for split propagation, but bio_integrity_clone()
doesn't copy bip_vcnt and BIP_CLONE_FLAGS excludes BIP_COPY_USER. |
| mod_auth_openidc is an OpenID Certified authentication and authorization module for the Apache 2.x HTTP server that implements the OpenID Connect Relying Party functionality. Prior to 2.4.19.4, an out-of-bounds read and a one-byte out-of-bounds write exist in the state-cookie parser of `mod_auth_openidc`. The issue is fixed in version 2.4.19.4 by stopping the scan at the string terminator so a value-less token is rejected. No in-product workarounds are available. As a stop-gap, an upstream reverse proxy or WAF that rejects or normalizes malformed `Cookie` headers (tokens lacking `=`) can reduce exposure, but upgrading is the recommended remediation. |
| GStreamer MRF File Parsing Heap-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GStreamer. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.
The specific flaw exists within the parsing of MRF files. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a heap-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-29608. |
| GStreamer OGG File Parsing Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GStreamer. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.
The specific flaw exists within the parsing of OGG files. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-29584. |
| GStreamer PNG File Parsing Heap-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GStreamer. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.
The specific flaw exists within the parsing of PNG files. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a heap-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-29581. |
| Sudo through 1.9.17p2 fails to apply intercept policy checks to the execveat system call in ptrace-based intercept mode. Users permitted to run specific commands can execute denied programs by calling execveat directly or through fexecve, bypassing policy enforcement and logging. |
| Tornado is a Python web framework and asynchronous networking library. Prior to 6.5.8, Tornado parses application/x-www-form-urlencoded request bodies with urllib.parse.parse_qs in tornado/escape.py without passing max_num_fields. RequestHandler._execute in tornado/web.py parses the body before handler dispatch through HTTPServerRequest._parse_body and parse_body_arguments in tornado/httputil.py, so an unauthenticated request body containing millions of separator-delimited fields can synchronously stall the single-threaded event loop and delay every connection. The body is bounded only by max_buffer_size, which defaults to 104857600 bytes. This issue is fixed in version 6.5.8. |
| A maliciously crafted DWG or DXF file, when parsed through Autodesk AutoCAD, can force an Out-of-Bounds Read vulnerability. A malicious actor can leverage this vulnerability to cause a crash or disclose sensitive information. |
| A maliciously crafted DWG or DXF file, when parsed through Autodesk AutoCAD, can force an Out-of-Bounds Read vulnerability. A malicious actor can leverage this vulnerability to cause a crash or disclose sensitive information. |
| A maliciously crafted DXF file, when parsed through Autodesk AutoCAD, can force a Heap-Based Overflow vulnerability. A malicious actor can leverage this vulnerability to cause a crash, read sensitive data, or execute arbitrary code in the context of the current process. |
| A flaw was found in the file-xwd plugin in GIMP. When processing a specially crafted XWD image file, the plugin validates the image width and bytes-per-line parameters independently rather than ensuring their combined values are consistent with the allocated buffer size. This incorrect validation leads to improper bounds checking, causing a heap out-of-bounds read. This issue can result in an application crash, leading to a denial of service or a limited information disclosure of heap memory contents into the produced image. |
| NVIDIA Cumulus Linux contains a vulnerability in the Link Layer Discovery Protocol (LLDP) daemon component, where an unauthenticated attacker on an adjacent network could cause buffer overflow by sending crafted LLDP frames. A successful exploit of this vulnerability might lead to code execution. |
| In the Linux kernel, the following vulnerability has been resolved:
inet: RAW sockets using IPPROTO_RAW MUST drop incoming ICMP
Yizhou Zhao reported that simply having one RAW socket on protocol
IPPROTO_RAW (255) was dangerous.
socket(AF_INET, SOCK_RAW, 255);
A malicious incoming ICMP packet can set the protocol field to 255
and match this socket, leading to FNHE cache changes.
inner = IP(src="192.168.2.1", dst="8.8.8.8", proto=255)/Raw("TEST")
pkt = IP(src="192.168.1.1", dst="192.168.2.1")/ICMP(type=3, code=4, nexthopmtu=576)/inner
"man 7 raw" states:
A protocol of IPPROTO_RAW implies enabled IP_HDRINCL and is able
to send any IP protocol that is specified in the passed header.
Receiving of all IP protocols via IPPROTO_RAW is not possible
using raw sockets.
Make sure we drop these malicious packets. |
| In the Linux kernel, the following vulnerability has been resolved:
ibmvnic: Use kernel helpers for hex dumps
Previously, when the driver was printing hex dumps, the buffer was cast
to an 8 byte long and printed using string formatters. If the buffer
size was not a multiple of 8 then a read buffer overflow was possible.
Therefore, create a new ibmvnic function that loops over a buffer and
calls hex_dump_to_buffer instead.
This patch address KASAN reports like the one below:
ibmvnic 30000003 env3: Login Buffer:
ibmvnic 30000003 env3: 01000000af000000
<...>
ibmvnic 30000003 env3: 2e6d62692e736261
ibmvnic 30000003 env3: 65050003006d6f63
==================================================================
BUG: KASAN: slab-out-of-bounds in ibmvnic_login+0xacc/0xffc [ibmvnic]
Read of size 8 at addr c0000001331a9aa8 by task ip/17681
<...>
Allocated by task 17681:
<...>
ibmvnic_login+0x2f0/0xffc [ibmvnic]
ibmvnic_open+0x148/0x308 [ibmvnic]
__dev_open+0x1ac/0x304
<...>
The buggy address is located 168 bytes inside of
allocated 175-byte region [c0000001331a9a00, c0000001331a9aaf)
<...>
=================================================================
ibmvnic 30000003 env3: 000000000033766e |
| Date::Manip versions through 7.00 for Perl return corrupted dates via non-ASCII decimal digits that pass the numeric range tests in check.
The parse regexes capture year, month and day with the `\d` shorthand, which on a character string matches the whole Unicode decimal digit property `\p{Nd}` and not just `[0-9]`. Date::Manip::Base::check then validates the captured fields with numeric comparisons alone (`$y<1 || $y>9999`, `$m<1 || $m>12`, `$d<1 || $d>$days`), and _parse_check stores the numified fields (`$y+0`). Perl truncates a string at the first character that is not an ASCII digit, so a field whose leading characters are ASCII digits numifies to an in-range prefix and satisfies every test: a year field of three ASCII digits followed by U+0664 ARABIC-INDIC DIGIT FOUR numifies to 202, giving the year 0202, and one non-ASCII digit in the month or day field shifts those fields the same way. The hour, minute and second fields match explicit ASCII character classes (`0?[0-9]`, `[0-5][0-9]`) and do not shift, though a non-ASCII digit in a fractional hour or minute field truncates the fraction.
Any caller that passes an untrusted character string to ParseDate() or Date::Manip::Date->parse() can get back a date that differs from the string it parsed, with no parse error. Where the parsed date gates logic such as an expiry check or a retention window, the shift goes unnoticed. |
| ServiceNow has remediated a sandbox escape security issue that was identified in the ServiceNow AI Platform. This security issue could allow an unauthenticated user to execute arbitrary code within the ServiceNow AI Platform, potentially leading to more access to the ServiceNow AI Platform than intended.
ServiceNow deployed a security update to hosted instances and ServiceNow provided the update to our partners and self-hosted customers. We are not currently aware of malicious exploitation against ServiceNow instances.
We recommend customers promptly apply appropriate updates or upgrade to a patched release if they have not already done so. |
| An issue was discovered in Denx U-Boot before 2026.04. An integer overflow vulnerability exists in function ext4fs_get_bgdtable, the size calculation can lead to under allocation and this underallocated buffer will be used in memcpy() which could lead to arbitrary code execution, a denial of service, or other unspecified impacts. |
