| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In NotificationChannel of NotificationChannel.java, there is a possible failure to persist permissions settings due to resource exhaustion. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-10 Android-11 Android-12 Android-12L Android-13Android ID: A-242703118 |
| Linksys E8450 v1.2.00.360516 was discovered to contain a command injection vulnerability via wizard_status. |
| Linksys E8450 v1.2.00.360516 was discovered to contain a command injection vulnerability via userEmail. |
| Composer is a dependency manager for PHP. On the 2.x branch prior to versions 2.2.24 and 2.7.7, the `status`, `reinstall` and `remove` commands with packages installed from source via git containing specially crafted branch names in the repository can be used to execute code. Patches for this issue are available in version 2.2.24 for 2.2 LTS or 2.7.7 for mainline. As a workaround, avoid installing dependencies via git by using `--prefer-dist` or the `preferred-install: dist` config setting. |
| A vulnerability has been identified in SINEMA Remote Connect Server (All versions < V3.1). The affected application contains a file upload server that is vulnerable to command injection. An attacker could use this to achieve arbitrary code execution. |
| A vulnerability has been identified in SIMATIC CP 1242-7 V2 (All versions < V3.3.46), SIMATIC CP 1243-1 (All versions < V3.3.46), SIMATIC CP 1243-7 LTE EU (All versions < V3.3.46), SIMATIC CP 1243-7 LTE US (All versions < V3.3.46), SIMATIC CP 1243-8 IRC (All versions < V3.3.46), SIMATIC CP 1542SP-1 IRC (All versions >= V2.0 < V2.2.28), SIMATIC CP 1543-1 (All versions < V3.0.22), SIMATIC CP 1543SP-1 (All versions >= V2.0 < V2.2.28), SIPLUS ET 200SP CP 1542SP-1 IRC TX RAIL (All versions >= V2.0 < V2.2.28), SIPLUS ET 200SP CP 1543SP-1 ISEC (All versions >= V2.0 < V2.2.28), SIPLUS ET 200SP CP 1543SP-1 ISEC TX RAIL (All versions >= V2.0 < V2.2.28), SIPLUS NET CP 1242-7 V2 (All versions < V3.3.46), SIPLUS NET CP 1543-1 (All versions < V3.0.22), SIPLUS S7-1200 CP 1243-1 (All versions < V3.3.46), SIPLUS S7-1200 CP 1243-1 RAIL (All versions < V3.3.46). The application does not correctly escape some user provided fields during the authentication process. This could allow an attacker to inject custom commands and execute arbitrary code with elevated privileges. |
| Affected devices do not properly handle the renegotiation of SSL/TLS parameters. This could allow an unauthenticated remote attacker to bypass the TCP brute force prevention and lead to a denial of service condition for the duration of the attack. |
| The tinygltf library uses the C library function wordexp() to perform file path expansion on untrusted paths that are provided from the input file. This function allows for command injection by using backticks. An attacker could craft an untrusted path input that would result in a path expansion. We recommend upgrading to 2.6.0 or past commit 52ff00a38447f06a17eab1caa2cf0730a119c751 |
| A vulnerability has been identified in JT2Go (All versions < V14.1.0.6), Teamcenter Visualization V13.2 (All versions < V13.2.0.12), Teamcenter Visualization V13.3 (All versions < V13.3.0.8), Teamcenter Visualization V14.0 (All versions < V14.0.0.4), Teamcenter Visualization V14.1 (All versions < V14.1.0.6). The CGM_NIST_Loader.dll contains stack exhaustion vulnerability when parsing a CGM file. An attacker could leverage this vulnerability to crash the application causing denial of service condition. |
| All versions of Quagga, 0.93 through 1.1.0, are vulnerable to an unbounded memory allocation in the telnet 'vty' CLI, leading to a Denial-of-Service of Quagga daemons, or even the entire host. When Quagga daemons are configured with their telnet CLI enabled, anyone who can connect to the TCP ports can trigger this vulnerability, prior to authentication. Most distributions restrict the Quagga telnet interface to local access only by default. The Quagga telnet interface 'vty' input buffer grows automatically, without bound, so long as a newline is not entered. This allows an attacker to cause the Quagga daemon to allocate unbounded memory by sending very long strings without a newline. Eventually the daemon is terminated by the system, or the system itself runs out of memory. This is fixed in Quagga 1.1.1 and Free Range Routing (FRR) Protocol Suite 2017-01-10. |
| A Command Injection vulnerability in Schneider Electric homeLYnk Controller exists in all versions before 1.5.0. |
| A vulnerability in the TCP connection handling functionality of Cisco Remote Expert Manager Software 11.0.0 could allow an unauthenticated, remote attacker to disable TCP ports and cause a denial of service (DoS) condition on an affected system. The vulnerability is due to a lack of rate-limiting functionality in the TCP Listen application of the affected software. An attacker could exploit this vulnerability by sending a crafted TCP traffic stream in which specific types of TCP packets are flooded to an affected device, for example a TCP packet stream in which the TCP FIN bit is set in all the TCP packets. A successful exploit could allow the attacker to cause certain TCP listening ports on the affected system to stop accepting incoming connections for a period of time or until the affected device is restarted, resulting in a DoS condition. In addition, system resources, such as CPU and memory, could be exhausted during the attack. Cisco Bug IDs: CSCva29806. |
| A vulnerability in Cisco Prime Data Center Network Manager (DCNM) Software could allow an unauthenticated, remote attacker to log in to the administrative console of a DCNM server by using an account that has a default, static password. The account could be granted root- or system-level privileges. The vulnerability exists because the affected software has a default user account that has a default, static password. The user account is created automatically when the software is installed. An attacker could exploit this vulnerability by connecting remotely to an affected system and logging in to the affected software by using the credentials for this default user account. A successful exploit could allow the attacker to use this default user account to log in to the affected software and gain access to the administrative console of a DCNM server. This vulnerability affects Cisco Prime Data Center Network Manager (DCNM) Software releases prior to Release 10.2(1) for Microsoft Windows, Linux, and Virtual Appliance platforms. Cisco Bug IDs: CSCvd95346. |
| The ReadSVGImage function in svg.c in ImageMagick 7.0.5-4 allows remote attackers to consume an amount of available memory via a crafted file. |
| Memory leak in the v9fs_list_xattr function in hw/9pfs/9p-xattr.c in QEMU (aka Quick Emulator) allows local guest OS privileged users to cause a denial of service (memory consumption) via vectors involving the orig_value variable. |
| The FusionSphere OpenStack with software V100R006C00 and V100R006C10 has a command injection vulnerability due to the insufficient input validation on four TCP listening ports. An unauthenticated attacker can exploit the vulnerabilities to gain root privileges by sending some messages with malicious commands. |
| An issue was discovered in Magick++ in ImageMagick 6.9.7. A specially crafted file creating a nested exception could lead to a memory leak (thus, a DoS). |
| In Sophos Web Appliance (SWA) before 4.3.1.2, a section of the machine's configuration utilities for adding (and detecting) Active Directory servers was vulnerable to remote command injection, aka NSWA-1314. |
| Memory leak in the vrend_renderer_init_blit_ctx function in vrend_blitter.c in virglrenderer before 0.6.0 allows local guest OS users to cause a denial of service (host memory consumption) via a large number of VIRGL_CCMD_BLIT commands. |
| Memory leak in hw/audio/es1370.c in QEMU (aka Quick Emulator) allows local guest OS privileged users to cause a denial of service (host memory consumption and QEMU process crash) via a large number of device unplug operations. |
