| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| pgAdmin 4's File Manager save_file endpoint, which backs saving from the Query Tool and ERD, validated the requested path with Filemanager.check_access_permission() and then opened the file for writing with a plain open() call. CVE-2026-7819 had previously hardened the separate file upload path by opening its target with O_NOFOLLOW, so that the kernel refuses to follow a symbolic link at the final path component, but save_file was left on an unprotected open(). A symbolic link already present when the check ran was rejected by the check itself; the remaining exposure was a link substituted at the final path component in the interval between the check and the write, at which point the write followed the link and landed outside the user's storage directory, creating or overwriting an arbitrary file as the operating-system account running pgAdmin.
Exploitation requires the ability to create or replace a symbolic link inside the requesting user's storage directory. pgAdmin exposes no interface that creates symbolic links, so this requires filesystem access to the pgAdmin host or to a shared or network-mounted storage backend, together with winning the timing window. The reporter did not achieve a write against a released version, having attempted approximately 63,000 racing requests without success; the reported defect is the uncovered write path rather than a demonstrated sandbox escape.
The fix routes save_file's write through the same O_NOFOLLOW-protected helper already used by the upload path, so both File Manager write sinks carry identical kernel-enforced protection, and reports a symbolic-link refusal explicitly instead of surfacing the underlying system error text. Note that files created by save_file are now given mode 0600, inheriting the behaviour introduced for uploads. The protection covers the final path component; substitution of an intermediate directory component is not addressed by this change.
This issue affects pgAdmin 4: from the introduction of the containment check in the File Manager save path before 9.18. |
| A security vulnerability has been detected in DLR-RM stable-baselines3 up to 2.9.0. This affects the function PPO.load/load_replay_buffer/VecNormalize.load of the file save_util.py. Such manipulation leads to deserialization. It is possible to launch the attack remotely. The exploit has been disclosed publicly and may be used. In v2.9.0 the PyTorch tensor load path is hardened (weights_only=True), but that hardening was later reverted on master via PR #1913 "Hotfix: revert loading with weights_only=True" [blocked] to fix PyTorch 1.13 compat - so even the one "safe" path is inconsistent across versions. #2281 was closed as a duplicate of #1831 since both are unsafe pickle deserialization - but #1831's fix (PR #41) only gated the Hugging Face Hub loader in the separate huggingface_sb3 package. This finding covers the core stable_baselines3 load APIs (PPO.load, load_replay_buffer, VecNormalize.load), which have no safe mode or gate and remained exploitable in v2.9.0 until the outstanding hardening (PR #2264) ships. |
| The fix for CVE-2026-47065/ZDRES-232 ("resolveProxyClass Not Overridden - acceptMatchers Filter Bypass via java.lang.reflect.Proxy"), released on 2026-06-02 and announced as "Fully addressed" in MINA 2.2.8, 2.1.13 and 2.0.29, was committed to the
2.2.X branch only. The 2.0.X and 2.1.X maintenance branches never received the resolveProxyClass() override, so the 2.0.29 and 2.1.13 artifacts listed as fixed -- and every later release on those lines, up to and including the current 2.0.30 and 2.1.14 -- remain vulnerable to the exact allow-list bypass that CVE-2026-47065 was meant to close. |
| Improper link resolution before file access in the quarantine restoration process of WatchDog Anti-Virus 1.8.640 on Windows allows local, low-privileged attackers to cause a quarantined file to be written to an arbitrary filesystem location by creating a directory junction at the original file path and persuading an administrator to restore the file. This may enable modification of protected files or SYSTEM-level code execution through DLL hijacking. |
| IBM MQ Java and JMS client libraries could allow an authenticated attacker to execute arbitrary code on client applications due to a deserialization filter bypass in exception handling. |
| A cross-namespace authorization flaw in multicluster-observability-addon allows a user with permission to modify a managed cluster’s ManagedClusterAddOn configuration to reference ClusterLogForwarder or OpenTelemetryCollector resources outside the permitted namespace. If those resources reference Secrets, the add-on may copy the referenced Secrets to the attacker-controlled managed cluster. |
| A weakness has been identified in piskvorky gensim up to 4.4.0. The impacted element is the function Load of the file gensim/utils.py of the component Model Loader. This manipulation of the argument fname causes deserialization. It is possible to initiate the attack remotely. The exploit has been made available to the public and could be used for attacks. Maintainer closed #3663 same-day with no comment, PR, or fix; repo's last push (2025-11-01) predates the report, so the unsafe pickle.load in SaveLoad.load remains unguarded at develop HEAD. |
| http-cache-semantics through 4.2.0 contains a cache validation vulnerability in the _varyMatches() function that fails to properly validate Vary header wildcards due to byte-for-byte string comparison. Attackers can request URLs previously fetched by other clients to receive cached responses intended for different users, disclosing sensitive information across clients. |
| A symlink following vulnerability was found in the ABRT post-create event handler scripts in libreport. Event scripts write output files using shell redirections without the O_NOFOLLOW flag. If the target file is replaced with a symlink, the shell process running as root follows the symlink and writes content to the symlink target, allowing arbitrary file overwrites on the system. |
| A flaw was found in libvirt. A local attacker, specifically a process running as the confined `swtpm` user, could exploit a symlink-following vulnerability in the `virFileChownFiles()` function. By planting a symbolic link within the `swtpm` state directory, the attacker could trick the root-level libvirt daemon into changing the ownership of an arbitrary file to the `swtpm` user. This allows for privilege escalation from the `swtpm` sandbox to root-level file ownership control. |
| A logging issue was addressed with improved data redaction. This issue is fixed in iOS 27 and iPadOS 27, macOS Golden Gate 27, macOS Sequoia 15.8, macOS Tahoe 26.7, tvOS 27, visionOS 27, watchOS 27. An app may be able to access sensitive user data. |
| This issue was addressed with improved handling of symlinks. This issue is fixed in macOS Golden Gate 27. An app may be able to break out of its sandbox. |
| A logging issue was addressed with improved data redaction. This issue is fixed in macOS Golden Gate 27, macOS Sequoia 15.8, macOS Tahoe 26.7. An app may be able to access user-sensitive data. |
| An issue was discovered in Keyfactor SignServer before 7.6.0. A number of properties were identified to not have any restrictions to what path they can be set to by an admin user. Setting these properties to specific file paths can reveal information to the client side. Three specific properties were identified: The property ATTRIBUTESFILE in PKCS11CryotoToken can be set to a readable but not an accepted (i.e., recognized with attributes) file. In this case an error is thrown, confirming the existence of the file. The property KEYSTOREPATH in KeyStoreCryptoToken can be set to a non-existing file that will return an error confirming to the client side that the file does not exist. The property TRUSTSTOREPATH in RenewalWorker can be set to any path (without any restrictions) by an admin user. In the case that the provided path points to an existing file, readable by the user running the application server, but is not a recognized PEM format, it returns this as an error to the client side, confirming the existences of the file. |
| A privacy issue was addressed with improved private data redaction for log entries. This issue is fixed in iOS 26.7 and iPadOS 26.7, iOS 27 and iPadOS 27, macOS Golden Gate 27, macOS Sequoia 15.8, macOS Tahoe 26.7, tvOS 27, visionOS 27, watchOS 27. A malicious application may be able to determine a user's current location. |
| http-cache-semantics through 4.2.0 fails to properly validate security-zeroed cache entries when processing client max-stale directives, allowing unauthenticated attackers to retrieve cached responses belonging to other users. Attackers can request the same URL with a large max-stale value to obtain another user's Set-Cookie session credentials from shared-cache entries that were deliberately zeroed for security reasons. |
| LMDeploy is a toolkit for compressing, deploying, and serving large language models. Starting in version 0.9.2 and prior to version 0.16.0, LMDeploy's PyTorch DistServe/PD-disaggregation control plane used `recv_pyobj()` to deserialize messages received through a ZeroMQ PULL socket. PyZMQ implements `recv_pyobj()` using Python pickle deserialization, which can execute arbitrary code while reconstructing an object. The peer address used by the receiver was supplied through the `POST /distserve/p2p_connect` HTTP endpoint. An attacker who could reach an affected DistServe API server could cause the server to connect to an attacker-controlled ZeroMQ endpoint and deserialize a crafted pickle payload. API-key authentication is not enabled unless the operator explicitly configures it. As a result, affected DistServe deployments without API keys allowed unauthenticated remote code execution with the privileges of the LMDeploy serving process. This issue affects the PyTorch backend when PD-disaggregation/DistServe is enabled. Ordinary deployments that do not use the affected disaggregated-serving path do not expose this data flow. The fix was released in LMDeploy 0.16.0. Users who cannot upgrade immediately should prevent untrusted clients from reaching `/distserve/*` endpoints, restrict the DistServe HTTP and ZeroMQ control planes to trusted cluster networks, configure API-key authentication, and block arbitrary outbound ZeroMQ connections from serving nodes. These measures reduce exposure but do not make pickle deserialization safe. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: core: quiesce input in hid_hw_stop() to prevent use-after-free
A driver's probe calls hid_device_io_start() to enable input delivery,
then fails at a later initialization step and unwinds via hid_hw_stop().
The unwind frees struct hidraw via hidraw_disconnect() while in-flight
HID reports may still be running on another CPU, dereferencing the
freed object through hidraw_report_event(). syzbot reports the
resulting use-after-free for the corsair-psu HID driver.
Edward Adam Davis posted a per-driver fix for corsair-psu that adds
an explicit hid_device_io_stop() before hid_hw_stop() in the probe
error path ("hwmon: prevent packets from going to driver for probe",
2026-04-28). Auditing the tree shows 15 drivers call
hid_device_io_start(); 7 also call hid_device_io_stop() and 8 do not:
drivers calling hid_device_io_start() without a matching
hid_device_io_stop() before hid_hw_stop():
drivers/hwmon/corsair-psu.c (fix posted by Edward)
drivers/hwmon/corsair-cpro.c
drivers/hwmon/nzxt-kraken3.c
drivers/hwmon/nzxt-smart2.c
drivers/hwmon/gigabyte_waterforce.c
drivers/hid/hid-logitech-dj.c
drivers/hid/hid-nintendo.c
drivers/hid/hid-mcp2221.c
Roughly half of all callers of the API are exposed. Centralize the
quiesce in hid_hw_stop() so callers do not have to remember the
matching stop: if a driver has left hdev->io_started true on entry,
call hid_device_io_stop() before hid_disconnect().
For the 7 drivers that already call hid_device_io_stop() correctly,
hdev->io_started is false on entry, the guard short-circuits, and
behavior is unchanged.
No Fixes: tag because the affected drivers gained their
hid_device_io_start() calls independently over years; the bug is a
class-wide API misuse rather than a regression from one commit. |
| A vulnerability in the web-based management interface of Cisco ISE could allow an authenticated, remote attacker to execute arbitrary commands on the underlying operating system of an affected device. To exploit this vulnerability, the attacker must have at least low-privileged administrative credentials.
This vulnerability is due to insecure deserialization of a user-supplied Java byte stream. An attacker could exploit this vulnerability by sending a crafted serialized Java object to the web-based management interface of an affected device. A successful exploit could allow the attacker to execute arbitrary code on the device and elevate privileges to root. In single-node deployments, successful exploitation of this vulnerability could cause the affected ISE node to become unavailable, resulting in a denial of service (DoS) condition. In that condition, endpoints that have not already authenticated would be unable to access the network until the node is restored. |
| On affected platforms running Arista EOS with VRRP enabled, the peer device VRRP authentication credentials are logged in cleartext on the switch, allowing an authenticated user with sufficient privileges to view agent trace logs (or a system receiving forwarded log output) to obtain the peer device VRRP authentication credentials without having access to the network segment on which VRRP is running. |
