| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| X11 protocol dissector crash in 4.6.0 to 4.6.8 and 4.4.0 to 4.4.18 allows denial of service |
| Privilege escalation due to incorrect boundary conditions in the Graphics: WebRender component. This vulnerability was fixed in Firefox 156, Firefox ESR 115.41, Firefox ESR 140.16, Firefox ESR 153.3, Thunderbird 156, Thunderbird 140.16, and Thunderbird 153.3. |
| Incorrect boundary conditions in the Audio/Video: Playback component. This vulnerability was fixed in Firefox ESR 153.4, Thunderbird 157, Thunderbird 140.17, Thunderbird 153.4, Firefox 157, Firefox ESR 115.42, and Firefox ESR 140.17. |
| Other issue in the JavaScript: WebAssembly component. This vulnerability was fixed in Thunderbird 157 and Firefox 157. |
| In the Linux kernel, the following vulnerability has been resolved:
swiotlb: use the adjusted address for the highmem page lookup
swiotlb_bounce() reads the page frame number from the slot's recorded
orig_addr, then advances orig_addr by tlb_offset to reach the address
the caller asked about. The highmem branch mixes the two: the offset
within the page comes from the adjusted address, the page from the value
before it.
Once the adjustment crosses a page boundary the pair no longer describes
one location, and the whole copy lands one page below the intended one
for a positive tlb_offset, one above for a negative one. DMA_FROM_DEVICE
writes the device data over the wrong page and leaves the intended one
stale, DMA_TO_DEVICE feeds the device from a page the mapping may not
cover. Partial syncs through dma_sync_single_range_for_*() are what make
tlb_offset non-zero.
The branch test is picked the same way, so a slot recorded in lowmem can
be adjusted into highmem and the lowmem path then hands a highmem
address to phys_to_virt().
Take both from orig_addr once it is final and keep pfn in the branch
that uses it. PhysHighMem() asks the question straight from the address,
as dma-debug already does. |
| A build step for a Git source, crafted in a specific way, can bypass some policy validation rules. A malicious build definition can make the repository look like it is coming from a different remote URL than it really is when Git clone is happening. If policy is doing more stricter validation, for example based on commit SHA, commit data, or signatures, then all these validations still apply correctly. |
| A malicious frontend can submit an LLB definition that causes buildkitd
to panic and terminate, interrupting all builds running on that daemon. |
| apko allows users to build and publish OCI container images built from apk packages. From version 0.2.0 to before version 1.4.5, UserEntry.Parse and GroupEntry.Parse in pkg/passwd read the UID and GID fields of /etc/passwd and /etc/group entries with strconv.Atoi and convert them to uint32 without a range check. On 64-bit platforms an out-of-range value such as 4294967296 (2^32) is truncated to 0, and negative values wrap. Because apko parses the passwd and group entries supplied by the packages it installs and writes them back into the image, an attacker who controls a package installed into the image can ship an entry that appears to declare an unprivileged UID or GID but is written into the built image as UID 0 or GID 0 (root). The truncated UID is also used when resolving the image's run-as user. This issue has been fixed in version 1.4.5. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: Clamp implicit feedback packet count to URB capacity
data_ep_set_params() allocates each data URB for exactly u->packets
isochronous frames, so urb->iso_frame_desc[] has u->packets slots and
ctx->packets is the driver's only record of that limit. For an implicit
feedback sink, snd_usb_queue_pending_output_urbs() overwrites it with the
sync source's packet count, which is calculated independently from the
capture endpoint's parameters. When that count is larger,
prepare_playback_urb() and prepare_silent_urb() can write
iso_frame_desc[] past the allocation; their existing bounds limit payload
bytes, not the descriptor index.
The reproducer uses a high-speed UAC2 device declaring bInterval 1 for
implicit feedback capture (8 packets) and bInterval 4 for playback
(1 packet). On the first capture completion after the stream starts, it
accesses seven descriptors spanning 112 bytes beyond the one-packet URB:
BUG: KASAN: slab-out-of-bounds in prepare_playback_urb (sound/usb/pcm.c:1560)
Write of size 4 at addr ffff88801e696ad0 by task vhci_rx/178
prepare_playback_urb (sound/usb/pcm.c:1560)
prepare_outbound_urb (sound/usb/endpoint.c:340)
snd_usb_queue_pending_output_urbs (sound/usb/endpoint.c:501)
snd_complete_urb (sound/usb/endpoint.c:1834)
__usb_hcd_giveback_urb (drivers/usb/core/hcd.c:1657)
usb_hcd_giveback_urb (drivers/usb/core/hcd.c:1741)
vhci_rx_loop (drivers/usb/usbip/vhci_rx.c:107)
kthread (kernel/kthread.c:436)
The buggy address belongs to the object at ffff88801e696a00
which belongs to the cache kmalloc-256 of size 256
The buggy address is located 0 bytes to the right of
allocated 208-byte region [ffff88801e696a00, ffff88801e696ad0)
Record the allocated packet count per endpoint and clamp both the adopted
count and the packet-size copy to it. Fold the Format Type II delimiter
into urb_packs before the allocation loop so the recorded limit matches
every URB. |
| In the Linux kernel, the following vulnerability has been resolved:
pppoatm: ensure a writable skb header and linear data
In pppoatm_send(), LLC encapsulation checks whether there is sufficient
headroom for the 4-byte LLC header, but does not ensure that the skb header
is writable.
Normal transmit packets passing through ppp_start_xmit() have their header
unshared via skb_cow_head(). However, packets can also reach pppoatm_send()
via PPP channel bridging (PPPIOCBRIDGECHAN) without going through
ppp_start_xmit().
Use skb_cow_head() to ensure both sufficient headroom and a writable
header before pushing the LLC header.
While at it:
- Call pskb_may_pull(skb, 1) before inspecting skb->data[0] to prevent
out-of-bounds reads on zero-length or non-linear frames (e.g. from
bridging).
- Defer SC_COMP_PROT protocol compression until after pppoatm_may_send()
succeeds. This eliminates the temporary skb allocation on admission failure
and completely removes the fragile "undo" heuristic at the nospace label,
avoiding any risk of reading uninitialized headroom or performing an
unbalanced skb_push(). |
| Microsoft UFO is an open-source framework for intelligent automation across devices and platforms. Prior to 3.0.9, the run_shell tool in the CommandLineExecutor component of ufo/client/mcp/local_servers/cli_mcp_server.py validates only the first token of the bash_command parameter and permits explorer.exe. On Windows, explorer.exe delegates its following path argument to ShellExecute, so an attacker-influenced agent call can launch an arbitrary executable or script as the desktop user even though the subprocess uses shell=False. Exploitation depends on a user running an affected agent workflow and on inducing the tool call, but successful execution can access or modify that user's files, tokens, and sessions. This issue is fixed in version 3.0.9. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Fix integer overflow in mr_check_range() leading to OOB access
mr_check_range() validates that [iova, iova+length) falls within the
registered MR range using wraparound-prone arithmetic:
if (iova < mr->ibmr.iova ||
iova + length > mr->ibmr.iova + mr->ibmr.length)
A remote peer can craft an RDMA-Write/Read RETH so that iova + length
wraps to 0 (e.g. iova=0xfffffffffffffff8, length=8), bypassing the
check. rxe_mr_iova_to_index() then computes a huge index (int idx, only
guarded by WARN_ON) and rxe_mr_copy_xarray() dereferences
mr->page_info[huge], causing an out-of-bounds read/write and a kernel
oops that is triggerable by an unauthenticated remote peer.
Rewrite the check in overflow-safe form; the first two clauses guarantee
that the subsequent subtractions do not underflow:
if (iova < mr->ibmr.iova ||
length > mr->ibmr.length ||
iova - mr->ibmr.iova > mr->ibmr.length - length)
With the fix, mr_check_range() returns -EINVAL for the crafted iova and
the responder reports REMOTE_ACCESS_ERROR instead of triggering the OOB. |
| Buffer over-read vulnerability in Apache Tomcat Native during the TLS handshake permits a malicious user to trigger a DoS via a JVM crash.
This issue affects Apache Tomcat Native: from 2.0.0 through 2.0.15, from 1.3.0 through 1.3.8. Earlier, unsupported versions may also be affected.
Users are recommended to upgrade to version 1.3.9 or 2.0.16, which fix the issue. |
| Initialization of a resource with an insecure default vulnerability in Apache Tomcat Native enabled insecure options by default including ALLOW_CLIENT_RENEGOTIATION, NO_EXTENDED_MASTER_SECRET, IGNORE_UNEXPECTED_EOF and ALLOW_NO_DHE_KEX.
This issue affects Apache Tomcat Native: from 2.0.0 through 2.0.15, from 1.3.0 through 1.3.8. Earlier unsupported versions may also be affected.
Users are recommended to upgrade to version 2.0.16 or 1.3.9, which fix the issue. |
| libmikmod before 3.3.14 contains an integer overflow vulnerability in DSM_Load() in load_dsm.c that allows attackers to trigger heap buffer overflow via crafted track counts. Attackers can supply a DSM module whose numchn and numpat product wraps a 16-bit value, overwriting heap memory to cause crashes or potential code execution. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/iommu: Fix the overflow validation in iommu_tce_check_ioba
The commit b1af23d836f8 ("KVM: PPC: iommu: Unify TCE checking") unified
IOBA parameter checking across KVM and VFIO into iommu_tce_check_ioba().
While doing so, the passed in argument npages is ignored and constant
value '1' is used leaving out a possible overflow as the callers can
legitimately be using npages > 1 for H_STUFF_TCE or H_PUT_TCE_INDIRECT
cases.
Fix this by accounting for 'npages', checking for arithmetic overflow,
and verifying that the entire requested range (ioba - offset + npages)
does not exceed the table capacity 'size'. |
| A heap buffer overflow vulnerability in the FileMaker Server database engine block parsing routine allowed a maliciously crafted .fmp12 database file to cause memory corruption, potentially leading to arbitrary code execution. This vulnerability is addressed in FileMaker Server version 26.0.3. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: xfrm: use full sockets in local error paths
xfrm6_local_rxpmtu() and xfrm6_local_error() dereference skb->sk as if it
always pointed at a full IPv6 socket.
That is not guaranteed. TCP SYN-ACK skbs can be owned by a
TCP_NEW_SYN_RECV request_sock while the output path itself is driven by the
full listener. If rerouting selects an IPv6 XFRM tunnel route with a lower
MTU, the local PMTU/error handling path can reach these callbacks with that
mini-socket still attached to the skb.
The callbacks then miscast the request socket as a full inet/IPv6 socket and
can read beyond the request_sock allocation when they access inet_sock or
ipv6_pinfo state.
Resolve the owner with skb_to_full_sk() in both callbacks and bail out when
no full socket is attached. This matches the surrounding XFRM IPv6 PMTU/error
logic, which already reasons about full sockets with skb_to_full_sk(). |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/siw: Bound fragmented header copies by the remaining length
siw_get_hdr() can receive an extended DDP/RDMAP header across more than
one TCP callback. The first callback may receive most of the header,
while the next one still limits the copy to hdrlen - MIN_DDP_HDR instead
of the number of missing bytes. This makes the destination move past the
end of the header and overwrite the receive state, including
fpdu_part_rcvd. A later callback can then use a negative fpdu_part_rcvd
value as a copy offset, which creates an OOB write.
Use the number of header bytes already received when calculating the
next copy length. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bcmasp: fix tx_spb_ring_full() checking same slot cnt times
The loop initialised next_index from intf->tx_spb_index on every
iteration, so incr_ring() always produced the same result and only
one slot was ever tested. Move the initialisation before the loop
so each iteration advances next_index and the function correctly
checks that cnt consecutive descriptor slots are available before
allowing a new transmission. |
