| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: Stop leased rxq before uninstalling its memory provider
netif_rxq_cleanup_unlease() tears down the memory provider that was
installed on a physical RX queue through a netkit queue lease. It
currently revokes the provider's DMA mappings before stopping the
physical queue:
__netif_mp_uninstall_rxq(virt_rxq, p); /* DMA unmap */
__netif_mp_close_rxq(phys_rxq->dev, rxq_idx, p); /* queue stop */
This inverts the ordering used by the regular teardown paths (normal
device unregister and the io_uring zcrx close path), which stop the
queue before revoking the provider's mappings.
With the physical queue still live, its NAPI can keep consuming
net_iov entries from the page_pool alloc cache after the
__netif_mp_uninstall_rxq() has already cleared their dma_addr,
opening a window for the device to DMA to a stale or zero address.
Fix it by swapping the two calls so the queue is stopped (and its
NAPI quiesced) before the provider is uninstalled. No functional
regression was observed across repeated runs of the nk_qlease.py
HW selftest, which exercises the lease teardown path; this was
tested against fbnic QEMU emulation. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: sch_hfsc: Don't make class passive twice
update_vf() is called from two places for the same class during a single
dequeue when the class's child qdisc (e.g. codel/fq_codel) drops its last
packets while dequeuing:
1. The child calls qdisc_tree_reduce_backlog(), which, now that the child
is empty, invokes hfsc_qlen_notify() -> update_vf(cl, 0, 0) and turns
the class passive (cl_nactive is decremented up the hierarchy).
2. hfsc_dequeue() then calls update_vf(cl, qdisc_pkt_len(skb), cur_time)
to charge the dequeued bytes.
On the second call the class is already passive, but its child qdisc is
still empty, so update_vf() arms go_passive again:
if (cl->qdisc->q.qlen == 0 && cl->cl_flags & HFSC_FSC)
go_passive = 1;
The leaf is then skipped by the cl_nactive == 0 check inside the loop,
which does not clear go_passive, so the stale go_passive propagates to the
parent and decrements its cl_nactive a second time. A parent that still
has other active children is driven to cl_nactive == 0 and removed from
the vttree, even though those siblings are still backlogged. They are
never dequeued again and the qdisc stalls.
Fix this by only arming go_passive when the class is actually active, so an
already-passive class no longer triggers a second passive transition. The
byte accounting (cl->cl_total += len) still runs for every ancestor, so
dequeued bytes continue to be counted exactly once. |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: require net admin for TIPCv2 netlink mutators
TIPCv2 registers mutating generic-netlink operations without admin
permission flags. Generic netlink only checks CAP_NET_ADMIN when an
operation sets GENL_ADMIN_PERM or GENL_UNS_ADMIN_PERM, so a local
unprivileged process can currently change TIPC state through commands
such as TIPC_NL_NET_SET, TIPC_NL_KEY_SET, TIPC_NL_KEY_FLUSH, and
bearer enable/disable.
The legacy TIPC netlink API already checks netlink_net_capable(...,
CAP_NET_ADMIN) for administrative commands. Give the TIPCv2 mutators
the equivalent generic-netlink gate. Use GENL_UNS_ADMIN_PERM, which
maps to the same namespace-aware CAP_NET_ADMIN check that
netlink_net_capable() performs, so the behaviour matches the legacy
path and keeps working for CAP_NET_ADMIN holders in a non-initial user
namespace (containers).
A QEMU/KASAN repro run as uid/gid 65534 with zero effective
capabilities previously succeeded in changing the network id and node
identity, setting and flushing key material, and enabling/disabling a
UDP bearer. With this patch applied the same operations fail with
-EPERM. |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: prevent snt_unacked underflow on CONN_ACK
tipc_sk_conn_proto_rcv() subtracts the peer-supplied connection ack count
from the unsigned 16-bit send counter snt_unacked without checking that it
does not exceed the number of messages actually outstanding:
tsk->snt_unacked -= msg_conn_ack(hdr);
msg_conn_ack() is read straight from a received CONN_MANAGER/CONN_ACK
message. If the ack count is larger than snt_unacked, the subtraction
wraps to a near-maximum value, leaving tsk_conn_cong() permanently true
and starving the connection of further transmits.
Validate the ACK count at the start of the CONN_ACK block and drop the
message if it acknowledges more messages than are outstanding. A peer (or,
for a local connection, the connected peer socket) can otherwise wedge a
TIPC connection's send side by sending an oversized connection ack. |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: reject inverted service ranges from peer bindings
tipc_update_nametbl() inserts a binding advertised by a peer node using
the lower and upper service-range bounds taken directly from the wire,
without checking that lower <= upper. The local bind path validates the
ordering (tipc_uaddr_valid()), but the name-distribution path does not.
A binding with lower > upper is inserted at the far end of the
service-range rbtree (keyed on lower) where no lookup or withdrawal can
ever match it (service_range_foreach_match() requires sr->lower <= end).
The publication, its service_range node and the augmented rbtree entry
are then leaked for the lifetime of the namespace, and there is no
per-peer cap equivalent to TIPC_MAX_PUBL on locally created bindings.
Reject inverted ranges in the network path as well. A peer node can
otherwise leak unbounded binding-table memory by sending PUBLICATION
items with lower > upper. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: marvell/octeontx - fix DMA cleanup using wrong loop index
The sg_cleanup path used list[i] instead of list[j] when unmapping DMA
buffers, leaking successfully mapped entries and repeatedly unmapping
the failed one. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: cavium/cpt - fix DMA cleanup using wrong loop index
The sg_cleanup error path used list[i] instead of list[j] when unmapping
DMA buffers, leaking successfully mapped entries and repeatedly unmapping
the failed one. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: seq: Fix kernel heap address leak in bounce_error_event()
The comment above bounce_error_event() documents that user clients
should receive SNDRV_SEQ_EVENT_BOUNCE with the original event embedded
as variable-length data, while kernel clients should receive
SNDRV_SEQ_EVENT_KERNEL_ERROR with a quoted kernel pointer.
However, the implementation unconditionally uses
SNDRV_SEQ_EVENT_KERNEL_ERROR with data.quote.event set to the raw
struct snd_seq_event pointer for all clients. When a bounce error
event is delivered to a USER_CLIENT via snd_seq_read(), the kernel
heap address in data.quote.event is exposed to userspace through
copy_to_user() in the fixed-length branch.
This is a distinct leak path from the one addressed by commit
705dd6dcbc0e ("ALSA: seq: Clear variable event pointer on read"),
which sanitizes data.ext.ptr in the variable-length branch of
snd_seq_read(). The bounce_error_event() leak uses fixed-length
events that take the else branch where no sanitization occurs.
Differentiate the bounce event by client type. For USER_CLIENT,
send SNDRV_SEQ_EVENT_BOUNCE with SNDRV_SEQ_EVENT_LENGTH_VARIABLE
and data.ext pointing to the original event. The variable-length
path in snd_seq_event_dup() copies the event data into chained
cells, and snd_seq_expand_var_event() copies only the content --
never the pointer -- to userspace. For KERNEL_CLIENT, keep the
existing SNDRV_SEQ_EVENT_KERNEL_ERROR behavior with the quoted
pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/dma-iommu: Fix wrong scatterlist length assignment in P2PDMA path
In iommu_dma_map_sg(), when handling PCI P2PDMA cases, the DMA length
of the current scatterlist segment `s` is incorrectly assigned from the
head entry `sg->length` instead of the current entry `s->length`.
This typo causes all P2PDMA segments in the scatterlist to inherit the
length of the first segment, leading to corrupted DMA lengths for multi-
segment scatterlists.
Fix this by using `s->length` instead of `sg->length`. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: xilinx: use FIFO occupancy register to determine buffer size
The method the driver uses to determine the size of the FIFO has a
problem. What it currently does is this:
It stops the SPI hardware and writes to the TX FIFO register until TX
FIFO FULL asserts in the status register. But the hardware does not only
have the FIFO, it also has a shift register which can hold a byte. This
can be seen, when writing a byte to the FIFO (while the SPI hardware is
stopped,) the TX FIFO EMPTY is still empty. So, if we have a FIFO size
of 16 for example, the current method returns a 17.
This is a problem, at least when using the driver in irq mode. The same
size determined for the TX FIFO is also assumed for the RX FIFO. When a
SPI transaction wants to write the amount of the FIFO size or more
bytes, the following happens, for example with 16 bytes FIFO size:
The driver stops the SPI hardware and writes 17 bytes to the TX FIFO and
starts the SPI hardware and goes sleep.
The hardware then shifts out 17 bytes (FIFO + shift register) and
simultaneously reads bytes into the RX FIFO, but it only has 16 places,
so it looses one byte. Then TX FIFO empty asserts, wakes the driver
again, which has a fast path and reads 16 bytes from the RX FIFO, but
before reading the last 17th byte (which is lost) it does this:
sr = xspi->read_fn(xspi->regs + XSPI_SR_OFFSET);
if (!(sr & XSPI_SR_RX_EMPTY_MASK)) {
xilinx_spi_rx(xspi);
rx_words--;
}
It reads the status register and checks if the RX FIFO is not empty.
But it is empty in our case. So this check spins in a while loop
forever locking the driver.
This patch fixes the logic to determine the FIFO size. |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/region: Fix out-of-bounds access in cxl_cancel_auto_attach()
In cxl_cancel_auto_attach(), it assumes cxled->pos is a valid index for
accessing p->targets[]. However, cxled->pos can be set to negative errno
in cxl_region_sort_targets() if cxl_calc_interleave_pos() fails. This
causes the driver to use a negative index to access p->targets[],
resulting in out-of-bounds access.
Fix it by walking p->targets[] instead of using cxled->pos directly. |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/region: Fill first free targets[] slot during auto-discovery
Any invalid endpoint decoder pointer in the target array of an active
region is not allowed by cxl driver. This means cxl driver always
assumes the first p->nr_targets entries of the target array in an
auto-assembly region are valid. However, there are scenarios that could
leave NULL endpoint decoder pointer holes in the target array.
1. When cxl_cancel_auto_attach() removes an endpoint decoder from a
target array, the target slot is set to NULL. If the removed endpoint
decoder is not the last element in the target array, the target array
will contain a NULL hole.
2. When a auto-assembly region removes an assigned endpoint decoder, if
the removed endpoint decoder is not the last element in the target
array, always remains a NULL hole in the target array.
When a NULL pointer hole exists in a region's target array, it
introduces two potential problems:
1. Access an endpoint decoder via a NULL pointer. it always trigger
calltrace like that.
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000008: 0000 [#1] SMP KASAN PTI
RIP: 0010:cxl_calc_interleave_pos+0x26/0x810 [cxl_core]
Call Trace:
<TASK>
cxl_region_attach+0xc50/0x2140 [cxl_core]
cxl_add_to_region+0x321/0x2330 [cxl_core]
discover_region+0x92/0x150 [cxl_port]
device_for_each_child+0xf3/0x170
cxl_port_probe+0x150/0x200 [cxl_port]
cxl_bus_probe+0x4f/0xa0 [cxl_core]
really_probe+0x1c8/0x960
__driver_probe_device+0x323/0x450
driver_probe_device+0x45/0x120
__device_attach_driver+0x15d/0x280
bus_for_each_drv+0x10f/0x190
2. Not having enough valid endpoint decoders attached to an
auto-assembly region. if an auto-assembly region is created with lock
flag or assigned endpoint decoder with lock flag, which means
assigned endpoint decoder will not be reset during detaching, they
could re-attach to the auto-assembly region again. But cxl region
driver relies on p->nr_targets to verify whether the required number
of endpoint decoders has been attached, and NULL endpoint decoder
pointers are still counted in that case.
To fix above issues, adjust cxl_region_attach_auto() logic to find the
first free target slot for endpoint decoder attachment, this ensures
NULL holes in the target array are filled, rather than adding new
endpoint decoders at the tail of the target array. |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/region: Block region delete during region creation
Expand the range lock, rename it "regions_lock", to disable region deletion
in the critical period between construct_region() and attach_target(), as
well as the period between device_add() and registering the remove actions.
Otherwise, userspace can confuse the kernel. It can violate the assumption
the region stays registered through the completion of cxl_add_to_region().
It can violate the assumption that devm_add_action_or_reset() is working
with a live 'struct cxl_region'.
It is ok for the region to disappear outside of those windows as that
mirrors device hotplug flows where the proper locks are held. |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/region: Resolve region deletion races
Sungwoo noticed that the sysfs trigger to delete a region may try to delete
a region multiple times. It also has no exclusion relative to the kernel
releasing the region via CXL root device teardown.
Instead of installing new cxl root devres actions per region, use the
existing root decoder unregistration event to remove all remaining regions.
An xarray of regions replaces a devres list of regions.
This handles 3 separate issues with the old approach:
1/ sysfs users racing to delete the same region: no longer possible now
that the regions_lock is held over the lookup and deletion.
2/ multiple actions triggering deletion of the same region: solved by
erasing regions while holding @regions_lock, and only proceeding on
successful erasure.
3/ userspace racing devres_release_all() to trigger the devres not found
warning: solved by sysfs unregistration not requiring a release action |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: core: fix supplied_from allocations
If dts property power-supplies has multiple values, then accessing to
psy->supplied_from[i-1] in __power_supply_populate_supplied_from will
overrun supplied_from array. |
| In the Linux kernel, the following vulnerability has been resolved:
handshake: Require admin permission for DONE command
ACCEPT and DONE are the two downcalls of the handshake genl
family, both intended for use by the trusted handshake agent
(tlshd). ACCEPT already requires GENL_ADMIN_PERM; DONE has
no privilege check at all.
The fd-lookup in handshake_nl_done_doit() only confirms that
some pending handshake request exists for the supplied sockfd;
it does not authenticate the sender. An unprivileged process
that guesses or observes a valid sockfd can therefore submit
a DONE with HANDSHAKE_A_DONE_STATUS == 0, leaving the kernel
consumer to proceed as if the handshake succeeded. A non-zero
status on a forged DONE tears down a legitimate in-flight
handshake before tlshd can report its real result. |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt: fix head underflow on XDP head-grow
The xdp.py test test_xdp_native_adjst_head_grow_data crashes when run on
a bnxt machine (and also crashes in NIPA).
It seems that the bug is an underflow in bnxt_rx_multi_page_skb, which
builds the skb head:
napi_build_skb(data_ptr - bp->rx_offset, rxr->rx_page_size);
The problem with this expression is that in page mode, rx_offset is:
bp->rx_offset = NET_IP_ALIGN + XDP_PACKET_HEADROOM;
Which evaluates (at least on x86_64) to 258.
The test test_xdp_native_adjst_head_grow_data tests a case where the
head is adjusted by -256.
When this test runs, data_ptr is shifted to frag_start + 2 (where
frag_start = page_address(page) + offset).
Then, bnxt_rx_multi_page_skb is invoked and the napi_build_skb
expression subtracts 258, landing at an address before frag_start. This
could be either the previous fragment or the previous physical page when
the offset is < 256 (e.g. if the fragment started at offset 0).
When the skb is freed, the page pool fragment reference is dropped on
either the wrong page or the wrong frag of the right page. In either
case, the corrupted reference count can lead to the page being
prematurely recycled while still in use. Once (incorrectly) recycled, it
can be handed out again and on driver teardown this would result in a
double free.
The commit under fixes updated this code to handle the case where the
native page size is >= 64k, but it unintentionally broke the head grow
case.
To fix this, add an offset field to struct bnxt_sw_rx_bd, mirroring the
existing offset field in struct bnxt_sw_rx_agg_bd. Populate it on
allocation and preserve it on reuse.
In bnxt_rx_multi_page_skb, use the newly added offset field to compute
the fragment start and pass that to napi_build_skb. Adjust the layout
with skb_reserve.
There are two cases, the non-adjustment case and the adjustment case.
In both cases, the skb is built at page_address(page) + offset to
account for the case where the native page size >= 64K and skb_reserve
is called with data_ptr - (page_address(page) + offset). That
difference equals bp->rx_offset when data_ptr was not moved, or
bp->rx_offset + xdp_adjust when XDP adjusted the head.
Re-running the failing test with this commit applied causes the test to
run successfully to completion.
The other rx_skb_func implementations don't have this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: clear sock_ops cb flags before force-closing a child socket
A child socket inherits the listener's bpf_sock_ops_cb_flags via
sk_clone_lock(). If its setup fails in tcp_v4_syn_recv_sock() /
tcp_v6_syn_recv_sock(), the child is freed through put_and_exit, where
inet_csk_prepare_forced_close() drops the socket lock and tcp_done() runs
without it.
If BPF_SOCK_OPS_STATE_CB_FLAG was inherited, tcp_done() -> tcp_set_state()
calls tcp_call_bpf(), which expects the lock and trips sock_owned_by_me():
WARNING: include/net/sock.h:1799 at tcp_set_state+0x433/0x550
RIP: 0010:tcp_set_state+0x433/0x550 include/net/sock.h:1799
Call Trace:
<IRQ>
tcp_done+0xba/0x250 net/ipv4/tcp.c:5095
tcp_v4_syn_recv_sock+0x850/0xa50 net/ipv4/tcp_ipv4.c:1787
tcp_check_req+0xf30/0x1360 net/ipv4/tcp_minisocks.c:926
tcp_v4_rcv+0x1047/0x1b50 net/ipv4/tcp_ipv4.c:2164
</IRQ>
The child is freed before it is ever established, so it should run no
sock_ops callback. Clear its cb flags in inet_csk_prepare_for_destroy_sock(),
the common point for the IPv4, IPv6 and chtls forced-close paths and for the
MPTCP ->syn_recv_sock() failure path (dispose_child), which reaches tcp_done()
on a child that was never established too. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: sch_codel: Do not call qdisc_tree_reduce_backlog during peek before restoring qlen
Whenever codel drops packets during peek, it calls
qdisc_tree_reduce_backlog. An issue arises because it calls
qdisc_tree_reduce_backlog before it reincrements the qlen. If qlen drops
to zero, but peek returns an skb, the parent's qlen_notify callback will
be executed even though codel still has 1 packet on the queue and, thus,
will mistakenly deactivate the parent's class causing issues like a wild
memory access when qfq has codel as a child:
[ 36.339843][ T370] Oops: general protection fault, probably for non-canonical address 0xfbd59c0000000024: 0000 [#1] SMP KASAN NOPTI
[ 36.340408][ T370] KASAN: maybe wild-memory-access in range [0xdead000000000120-0xdead000000000127]
[ 36.340737][ T370] CPU: 2 UID: 0 PID: 370 Comm: tc Not tainted 7.1.0-rc5-00287-g66e13b626592 #87 PREEMPT(full)
[ 36.341113][ T370] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[ 36.341357][ T370] RIP: 0010:qfq_deactivate_agg (include/linux/list.h:1029 (discriminator 2) include/linux/list.h:1043 (discriminator 2) net/sched/sch_qfq.c:1369 (discriminator 2) net/sched/sch_qfq.c:1395 (discriminator 2)) sch_qfq
[ 36.342221][ T370] RSP: 0018:ffff8881100ef370 EFLAGS: 00010216
[ 36.342422][ T370] RAX: 0000000000000000 RBX: ffff8881058a9568 RCX: dffffc0000000000
[ 36.342664][ T370] RDX: 1ffff11021064dc3 RSI: ffff888108326e00 RDI: dffffc0000000000
[ 36.342905][ T370] RBP: ffff8881058a8280 R08: dead000000000122 R09: 1bd5a00000000024
[ 36.343140][ T370] R10: fffffbfff2940329 R11: fffffbfff2940329 R12: 0000000000000000
[ 36.343383][ T370] R13: dead000000000100 R14: ffff8881058a9580 R15: ffff8881058a9578
[ 36.343631][ T370] FS: 00007fc04b0ca780(0000) GS:ffff888184fef000(0000) knlGS:0000000000000000
[ 36.343911][ T370] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 36.344116][ T370] CR2: 0000557c02c02000 CR3: 000000010e0ba000 CR4: 0000000000750ef0
[ 36.344359][ T370] PKRU: 55555554
[ 36.344481][ T370] Call Trace:
...
[ 36.345054][ T370] qfq_reset_qdisc (net/sched/sch_qfq.c:357 net/sched/sch_qfq.c:1487) sch_qfq
[ 36.345222][ T370] qdisc_reset (net/sched/sch_generic.c:1057)
[ 36.345503][ T370] __qdisc_destroy (net/sched/sch_generic.c:1096)
[ 36.345677][ T370] qdisc_graft (net/sched/sch_api.c:1062 net/sched/sch_api.c:1053 net/sched/sch_api.c:1159)
[ 36.346335][ T370] tc_get_qdisc (net/sched/sch_api.c:1528 net/sched/sch_api.c:1556)
Fix this by only calling qdisc_tree_reduce_backlog in peek after the
qlen is restored. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: sch_dualpi2: Do not call qdisc_tree_reduce_backlog during peek before restoring qlen
Whenever dualpi2 drops packets during peek, it calls
qdisc_tree_reduce_backlog. An issue arises because it calls
qdisc_tree_reduce_backlog before it reincrements the qlen. If qlen drops
to zero, but peek returns an skb, the parent's qlen_notify callback will be
executed even though dualpi2 still has 1 packet on the queue and, thus,
mistakenly deactivates the parent's class which leads to a null-ptr-deref:
[ 101.427314][ T599] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000009: 0000 [#1] SMP KASAN NOPTI
[ 101.427755][ T599] KASAN: null-ptr-deref in range [0x0000000000000048-0x000000000000004f]
[ 101.428048][ T599] CPU: 2 UID: 0 PID: 599 Comm: ping Not tainted 7.1.0-rc5-00284-gbce53c430ed7 #102 PREEMPT(full)
[ 101.428400][ T599] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[ 101.428608][ T599] RIP: 0010:qfq_dequeue (net/sched/sch_qfq.c:1150) sch_qfq
[ 101.428821][ T599] Code: 00 fc ff df 80 3c 02 00 0f 85 46 0c 00 00 4c 8d 73 48 48 89 9d b8 02 00 00 48 b8 00 00 00 00 00 fc ff df 4c 89 f2 48 c1 ea 03 <80> 3c 02 00 0f 85 2d 0c 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8b
All code
[ 101.429348][ T599] RSP: 0018:ffff8881110df4f0 EFLAGS: 00010216
[ 101.429541][ T599] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: dffffc0000000000
[ 101.429763][ T599] RDX: 0000000000000009 RSI: 00000024c0000000 RDI: ffff88811436c2b0
[ 101.429985][ T599] RBP: ffff88811436c000 R08: ffff88811436c280 R09: 1ffff11021277523
[ 101.430206][ T599] R10: 1ffff11021277526 R11: 1ffff11021277527 R12: 00000024c0000000
[ 101.430423][ T599] R13: ffff88811436c2b8 R14: 0000000000000048 R15: 0000000020000000
[ 101.430642][ T599] FS: 00007f61813e1c40(0000) GS:ffff8881691ef000(0000) knlGS:0000000000000000
[ 101.430913][ T599] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 101.431100][ T599] CR2: 00005651650850a8 CR3: 000000010ca0b000 CR4: 0000000000750ef0
[ 101.431320][ T599] PKRU: 55555554
[ 101.431433][ T599] Call Trace:
[ 101.431544][ T599] <TASK>
[ 101.431628][ T599] __qdisc_run (net/sched/sch_generic.c:322 net/sched/sch_generic.c:427 net/sched/sch_generic.c:445)
[ 101.431792][ T599] ? dev_qdisc_enqueue (./include/trace/events/qdisc.h:49 (discriminator 22) net/core/dev.c:4176 (discriminator 22))
[ 101.431941][ T599] __dev_queue_xmit (./include/net/pkt_sched.h:120 ./include/net/pkt_sched.h:117 net/core/dev.c:4292 net/core/dev.c:4831)
Fix this by only calling qdisc_tree_reduce_backlog in peek after the
qlen is restored. |
