| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A Server-Side Request Forgery vulnerability in the APROL Web Portal used in B&R APROL <4.4-00P5 may allow an authenticated network-based attacker to force the web server to request arbitrary URLs. |
| A vulnerability exists in the RTU500 web server component that can cause a denial of service to the RTU500 CMU application if a specially crafted message sequence is executed on a WebSocket connection.
An attacker must be properly authenticated and the test mode function of RTU500 must be enabled to exploit this vulnerability.
The affected CMU will automatically recover itself if an attacker successfully exploits this vulnerability. |
| A security flaw has been discovered in Shenzhen Sixun Software Sixun Shanghui Group Business Management System 4.10.24.3. Affected by this issue is some unknown functionality of the file /ExportFiles/. The manipulation results in files or directories accessible. The attack may be launched remotely. This attack is characterized by high complexity. The exploitation is known to be difficult. The exploit has been released to the public and may be exploited. The vendor was contacted early about this disclosure but did not respond in any way. |
| In the Linux kernel, the following vulnerability has been resolved:
fscrypt: fix left shift underflow when inode->i_blkbits > PAGE_SHIFT
When simulating an nvme device on qemu with both logical_block_size and
physical_block_size set to 8 KiB, an error trace appears during
partition table reading at boot time. The issue is caused by
inode->i_blkbits being larger than PAGE_SHIFT, which leads to a left
shift of -1 and triggering a UBSAN warning.
[ 2.697306] ------------[ cut here ]------------
[ 2.697309] UBSAN: shift-out-of-bounds in fs/crypto/inline_crypt.c:336:37
[ 2.697311] shift exponent -1 is negative
[ 2.697315] CPU: 3 UID: 0 PID: 274 Comm: (udev-worker) Not tainted 6.18.0-rc2+ #34 PREEMPT(voluntary)
[ 2.697317] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
[ 2.697320] Call Trace:
[ 2.697324] <TASK>
[ 2.697325] dump_stack_lvl+0x76/0xa0
[ 2.697340] dump_stack+0x10/0x20
[ 2.697342] __ubsan_handle_shift_out_of_bounds+0x1e3/0x390
[ 2.697351] bh_get_inode_and_lblk_num.cold+0x12/0x94
[ 2.697359] fscrypt_set_bio_crypt_ctx_bh+0x44/0x90
[ 2.697365] submit_bh_wbc+0xb6/0x190
[ 2.697370] block_read_full_folio+0x194/0x270
[ 2.697371] ? __pfx_blkdev_get_block+0x10/0x10
[ 2.697375] ? __pfx_blkdev_read_folio+0x10/0x10
[ 2.697377] blkdev_read_folio+0x18/0x30
[ 2.697379] filemap_read_folio+0x40/0xe0
[ 2.697382] filemap_get_pages+0x5ef/0x7a0
[ 2.697385] ? mmap_region+0x63/0xd0
[ 2.697389] filemap_read+0x11d/0x520
[ 2.697392] blkdev_read_iter+0x7c/0x180
[ 2.697393] vfs_read+0x261/0x390
[ 2.697397] ksys_read+0x71/0xf0
[ 2.697398] __x64_sys_read+0x19/0x30
[ 2.697399] x64_sys_call+0x1e88/0x26a0
[ 2.697405] do_syscall_64+0x80/0x670
[ 2.697410] ? __x64_sys_newfstat+0x15/0x20
[ 2.697414] ? x64_sys_call+0x204a/0x26a0
[ 2.697415] ? do_syscall_64+0xb8/0x670
[ 2.697417] ? irqentry_exit_to_user_mode+0x2e/0x2a0
[ 2.697420] ? irqentry_exit+0x43/0x50
[ 2.697421] ? exc_page_fault+0x90/0x1b0
[ 2.697422] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 2.697425] RIP: 0033:0x75054cba4a06
[ 2.697426] Code: 5d e8 41 8b 93 08 03 00 00 59 5e 48 83 f8 fc 75 19 83 e2 39 83 fa 08 75 11 e8 26 ff ff ff 66 0f 1f 44 00 00 48 8b 45 10 0f 05 <48> 8b 5d f8 c9 c3 0f 1f 40 00 f3 0f 1e fa 55 48 89 e5 48 83 ec 08
[ 2.697427] RSP: 002b:00007fff973723a0 EFLAGS: 00000202 ORIG_RAX: 0000000000000000
[ 2.697430] RAX: ffffffffffffffda RBX: 00005ea9a2c02760 RCX: 000075054cba4a06
[ 2.697432] RDX: 0000000000002000 RSI: 000075054c190000 RDI: 000000000000001b
[ 2.697433] RBP: 00007fff973723c0 R08: 0000000000000000 R09: 0000000000000000
[ 2.697434] R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000000
[ 2.697434] R13: 00005ea9a2c027c0 R14: 00005ea9a2be5608 R15: 00005ea9a2be55f0
[ 2.697436] </TASK>
[ 2.697436] ---[ end trace ]---
This situation can happen for block devices because when
CONFIG_TRANSPARENT_HUGEPAGE is enabled, the maximum logical_block_size
is 64 KiB. set_init_blocksize() then sets the block device
inode->i_blkbits to 13, which is within this limit.
File I/O does not trigger this problem because for filesystems that do
not support the FS_LBS feature, sb_set_blocksize() prevents
sb->s_blocksize_bits from being larger than PAGE_SHIFT. During inode
allocation, alloc_inode()->inode_init_always() assigns inode->i_blkbits
from sb->s_blocksize_bits. Currently, only xfs_fs_type has the FS_LBS
flag, and since xfs I/O paths do not reach submit_bh_wbc(), it does not
hit the left-shift underflow issue.
[EB: use folio_pos() and consolidate the two shifts by i_blkbits] |
| In the Linux kernel, the following vulnerability has been resolved:
iommufd: Don't overflow during division for dirty tracking
If pgshift is 63 then BITS_PER_TYPE(*bitmap->bitmap) * pgsize will overflow
to 0 and this triggers divide by 0.
In this case the index should just be 0, so reorganize things to divide
by shift and avoid hitting any overflows. |
| Student Learning Assessment and Support System developed by JHENG GAO has a Exposure of Sensitive Information vulnerability, allowing unauthenticated remote attackers to view a specific page and obtain test accounts and password. |
| A vulnerability was found in ketr JEPaaS up to 7.2.8. This impacts the function readAllPostil of the file /je/postil/postil/readAllPostil. Performing a manipulation of the argument keyWord results in sql injection. The attack can be initiated remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| NVIDIA GPU Display Driver for Windows and Linux contains a vulnerability in the kernel mode layer, where a user in a guest can cause a NULL-pointer dereference in the host, which may lead to denial of service. |
| NVIDIA GPU Display Driver for Linux contains a vulnerability where an attacker may access a memory location after the end of the buffer. A successful exploit of this vulnerability may lead to denial of service and data tampering. |
| Misconfigured settings in IITB SSO v1.1.0 allow attackers to access sensitive application data. |
| Improper mstatus.SUM bit retention (non-zero) in Open-Source RISC-V Processor commit f517abb violates privileged spec constraints, enabling potential physical memory access attacks. |
| immich is a high performance self-hosted photo and video management solution. Prior to 1.132.0, immich is vulnerable to account hijacking through oauth2, because the state parameter is not being checked. The oauth2 state parameter is similar to a csrf token, so when the user starts the login flow this unpredictable token is generated and somehow saved in the browser session and passed to the identity provider, which will return the state parameter when redirecting the user back to immich. Before the user is logged in that parameter needs to be verified to make sure the login was actively initiated by the user in this browser session. On it's own, this wouldn't be too bad, but when immich uses the /user-settings page as a redirect_uri, it will automatically link the accounts if the user was already logged in. This means that if someone has an immich instance with a public oauth provider (like google), an attacker can - for example - embed a hidden iframe in a webpage or even just send the victim a forged oauth login url with a code that logs the victim into the attackers oauth account and redirects back to immich and links the accounts. After this, the attacker can log into the victims account using their own oauth credentials. This vulnerability is fixed in 1.132.0. |
| The MQTT add-on of PcVue fails to verify that a remote device’s certificate has not already expired or has not yet become valid. This allows malicious devices to present certificates that are not rejected properly.
The use of a client certificate reduces the risk for random devices to take advantage of this flaw. |
| An improper authorization level has been detected in the login panel. It may lead to
unauthenticated Server Side Request Forgery and allows to perform open services
enumeration. Server makes query to provided server (Server IP/DNS field) and is
triggering connection to arbitrary address.
|
| The Fox LMS – WordPress LMS Plugin plugin for WordPress is vulnerable to privilege escalation in all versions up to, and including, 1.0.5.1. This is due to the plugin not properly validating the 'role' parameter when creating new users via the `/fox-lms/v1/payments/create-order` REST API endpoint. This makes it possible for unauthenticated attackers to create new user accounts with arbitrary roles, including administrator, leading to complete site compromise. |
| The gix-transport crate before 0.36.1 for Rust allows command execution via the "gix clone 'ssh://-oProxyCommand=open$IFS" substring. NOTE: this was discovered before CVE-2024-32884, a similar vulnerability (involving a username field) that is more difficult to exploit. |
| A flaw was found in OpenShift GitOps. Namespace admins can create ArgoCD Custom Resources (CRs) that trick the system into granting them elevated permissions in other namespaces, including privileged namespaces. An authenticated attacker can then use these elevated permissions to create privileged workloads that run on master nodes, effectively giving them root access to the entire cluster. |
| A vulnerability, which was classified as critical, has been found in Xorbits Inference up to 1.4.1. This issue affects the function load of the file xinference/thirdparty/cosyvoice/cli/model.py. The manipulation leads to deserialization. |
| Improper restriction of communication channel to intended endpoints issue exists in UpdateNavi V1.4 L10 to L33 and UpdateNaviInstallService Service 1.2.0091 to 1.2.0125. If a local authenticated attacker send malicious data, an arbitrary registry value may be modified or arbitrary code may be executed. |
| On multiple products of SEIKO EPSON and FUJIFILM Corporation, the initial administrator password is easy to guess from the information available via SNMP. If the administrator password is not changed from the initial one, a remote attacker with SNMP access can log in to the product with the administrator privilege. |