| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The Webmin HTTP server (miniserv.pl) allows unauthenticated attackers to impersonate any user with a configured SSL client certificate by sending a forged HTTP header. A remote attacker can spoof certificate DNs and authenticate as any user. Fixed in 2.202. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: bla: avoid double decrement of bla.num_requests
The bla.num_requests is increased when no request_sent was in progress. And
it is decremented in various places (announcement was received, backbone is
purged, periodic work). But the check if the request_sent is actually set
to a specific state and the atomic_dec/_inc are not safe because they are
not atomic (TOCTOU) and multiple such code portions can run concurrently.
At the same time, it is necessary to modify request_sent (state) and
bla.num_requests atomically. Otherwise batadv_bla_send_request() might set
request_sent to 1 and is interrupted. batadv_handle_announce() can then
set request_sent back to 0 and decrement num_requests before
batadv_bla_send_request() incremented it.
The two operations must therefore be locked. And since state (request_sent)
and wait_periods are only accessed inside this lock, they can be converted
to simpler datatypes. And to avoid that the bla.num_requests is touched by
a parallel running context with a valid backbone_gw reference after
batadv_bla_purge_backbone_gw() ran, a third state "stopped" is required to
correctly signal that a backbone_gw is in the state of being cleaned up. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: mcast: fix use-after-free in orig_node RCU release
batadv_mcast_purge_orig() removes entries from RCU-protected hlists but
does not wait for an RCU grace period before returning. Concurrent RCU
readers may still accesses references to those entries at the point of
removal. RCU-protected readers trying to operate on entries like
orig->mcast_want_all_ipv6_node will then access already freed memory.
Fix this by moving batadv_mcast_purge_orig() to batadv_orig_node_release(),
just before the call_rcu() invocation. This ensures RCU readers that were
active at purge time have drained before the orig_node memory is reclaimed. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Validate GPIO pin LUT table size before iterating
[Why&How]
The GPIO pin table parsers in get_gpio_i2c_info() and
bios_parser_get_gpio_pin_info() derive an element count from the VBIOS
table_header.structuresize field, then iterate over gpio_pin[] entries.
However, GET_IMAGE() only validates that the table header itself fits
within the BIOS image. If the VBIOS reports a structuresize larger than
the actual mapped data, the loop reads past the end of the BIOS image,
causing an out-of-bounds read.
Fix this by calling bios_get_image() to validate that the full claimed
structuresize is accessible within the BIOS image before entering the
loop in both functions.
(cherry picked from commit ba5e95b43b773ae1bf1f66ee6b31eb774e65afe3) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/virtio: use uninterruptible resv lock for plane updates
virtio_gpu_cursor_plane_update() and virtio_gpu_resource_flush() lock
the framebuffer BO's dma_resv via virtio_gpu_array_lock_resv() and
ignore its return value. The function can fail with -EINTR from
dma_resv_lock_interruptible() (signal during lock wait) or with
-ENOMEM from dma_resv_reserve_fences() (fence slot allocation),
leaving the resv lock not held. The queue path then walks the object
array and calls dma_resv_add_fence(), which requires the lock held;
with lockdep enabled this trips dma_resv_assert_held():
WARNING: drivers/dma-buf/dma-resv.c:296 at dma_resv_add_fence+0x71e/0x840
Call Trace:
virtio_gpu_array_add_fence
virtio_gpu_queue_ctrl_sgs
virtio_gpu_queue_fenced_ctrl_buffer
virtio_gpu_cursor_plane_update
drm_atomic_helper_commit_planes
drm_atomic_helper_commit_tail
commit_tail
drm_atomic_helper_commit
drm_atomic_commit
drm_atomic_helper_update_plane
__setplane_atomic
drm_mode_cursor_universal
drm_mode_cursor_common
drm_mode_cursor_ioctl
drm_ioctl
__x64_sys_ioctl
Beyond the WARN, mutating the dma_resv fence list without the lock
races with concurrent readers/writers and can corrupt the list.
Both call sites run inside the .atomic_update plane callback, which
DRM atomic helpers do not allow to fail (by the time it runs, the
commit has been signed off to userspace and there is no clean
rollback path). Moving the lock acquisition to .prepare_fb was
rejected because the broader lock scope deadlocks against other BO
locking paths in the same atomic commit.
Introduce virtio_gpu_lock_one_resv_uninterruptible() that uses
dma_resv_lock() instead of dma_resv_lock_interruptible(). This
eliminates the -EINTR failure mode -- the realistic syzbot trigger
-- without extending the lock hold across the commit. The helper
locks a single BO and rejects nents > 1 with -EINVAL; both fix
sites lock exactly one BO.
Use it from virtio_gpu_cursor_plane_update() and
virtio_gpu_resource_flush(); check the return value to handle the
remaining -ENOMEM case from dma_resv_reserve_fences() by freeing
the objs and skipping the plane update for that frame. The
framebuffer BOs touched here are not shared with other contexts
and lock contention is expected to be brief, so the loss of
signal-interruptibility is acceptable.
Other callers of virtio_gpu_array_lock_resv() (the ioctl paths)
continue to use the interruptible variant.
The bug was reported by syzbot, triggered via fault injection
(fail_nth) on the DRM_IOCTL_MODE_CURSOR path, which forces the
-ENOMEM branch in dma_resv_reserve_fences(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/v3d: Fix use-after-free of CPU job query arrays on error path
The CPU job ioctl's fail label calls kvfree() on cpu_job's timestamp and
performance query arrays after v3d_job_cleanup(), which drops the job's
last reference and frees cpu_job. Reading cpu_job at that point is a
use-after-free. Also, on the early v3d_job_init() failure path, it is a
NULL dereference, since v3d_job_deallocate() zeroes the local pointer.
In the success path, the arrays are released from the scheduler's
.free_job callback, but on the error path, they are freed manually, as
the job was never pushed to the scheduler. While the success path deals
with this correctly, the fail path doesn't.
On top of that, the manual kvfree() calls only free the array storage;
they don't drm_syncobj_put() the per-query syncobjs that
v3d_timestamp_query_info_free() and v3d_performance_query_info_free()
release on the success path. So the same fail path that triggers the
use-after-free also leaks one syncobj reference per query.
Unify the CPU job teardown into the CPU job's kref destructor, mirroring
v3d_render_job_free(). The scheduler's .free_job slot reverts to the
generic v3d_sched_job_free() and the fail label drops the manual
kvfree() calls, leaving a single teardown path that is reached from both
the scheduler and the ioctl error path. That removes the use-after-free,
the NULL dereference, and the syncobj leak by construction. |
| A vulnerability in the web-based management interface of Access Points running AOS-10 and AOS-8 Instant could allow an unauthenticated remote attacker to execute arbitrary JavaScript code in a victim's browser within the same local network. Successful exploitation could allow an attacker to compromise user data and potentially manipulate device configuration settings. |
| In JetBrains TeamCity before 2026.1.2, 2025.11.6 сode execution via Kotlin DSL sandbox escape was possible |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: tp_meter: directly shut down timer on cleanup
batadv_tp_sender_cleanup() was calling timer_delete_sync() followed by
timer_delete() to guard against the timer handler re-arming itself between
the two calls. This double-deletion hack relied on the sending status being
set to 0 to suppress re-arming.
Replace both calls with a single timer_shutdown_sync(). This function both
waits for any running timer callback to complete (like timer_delete_sync())
and permanently disarms the timer so it cannot be re-armed afterwards,
making re-arming prevention unconditional and self-documenting.
The re-arming property is also required because otherwise:
1. context 0 (batadv_tp_recv_ack()) checks in
batadv_tp_reset_sender_timer() if sending is still 1 -> it is
2. context 1 changes in batadv_tp_sender_shutdown() sending to 0 and in
this process forces the kthread to stop timer in
batadv_tp_sender_cleanup()
3. context 0 continues in batadv_tp_reset_sender_timer() and rearms the
timer -> but the reference for it is already gone |
| Vulnerability in the Oracle Product Workbench product of Oracle E-Business Suite (component: Internal Operations). Supported versions that are affected are 12.2.3-12.2.15. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Product Workbench. Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all Oracle Product Workbench accessible data as well as unauthorized access to critical data or complete access to all Oracle Product Workbench accessible data. CVSS 3.1 Base Score 8.1 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N). |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: tt: fix negative tt_buff_len
batadv_orig_node::tt_buff_len was declared as s16, but the field is never
intended to hold a negative value. When a value greater than 32767 is
assigned, it wraps to a negative signed integer.
In batadv_send_other_tt_response(), tt_buff_len is temporarily widened to
s32. The incorrectly negative s16 value propagates into the s32, causing
batadv_tt_prepare_tvlv_global_data() to allocate a full sized buffer but
populates only a small portion of it with the collected changeset. All
remaining bits are kept uninitialized.
Using an u16 avoids this type confusion and ensures that no (negative) sign
extension is performed in batadv_send_other_tt_response(). |
| Vulnerability in the Oracle Product Workbench product of Oracle E-Business Suite (component: Security). Supported versions that are affected are 12.2.3-12.2.15. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Product Workbench. Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all Oracle Product Workbench accessible data as well as unauthorized access to critical data or complete access to all Oracle Product Workbench accessible data. CVSS 3.1 Base Score 8.1 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N). |
| Vulnerability in the Oracle Product Workbench product of Oracle E-Business Suite (component: Internal Operations). Supported versions that are affected are 12.2.3-12.2.15. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Product Workbench. Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all Oracle Product Workbench accessible data as well as unauthorized access to critical data or complete access to all Oracle Product Workbench accessible data. CVSS 3.1 Base Score 8.1 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N). |
| A flaw was found in the OpenShift build process, where the docker-build container is configured with a hostPath volume mount that maps the node's /var/lib/kubelet/config.json file into the build pod. This file contains sensitive credentials necessary for pulling images from private repositories. The mount is not read-only, which allows the attacker to overwrite it. By modifying the config.json file, the attacker can cause a denial of service by preventing the node from pulling new images and potentially exfiltrating sensitive secrets. This flaw impacts the availability of services dependent on image pulls and exposes sensitive information to unauthorized parties. |
| Vulnerability in the Oracle EDI Gateway product of Oracle E-Business Suite (component: All Miscellaneous EDI Issues). Supported versions that are affected are 12.2.3-12.2.15. Easily exploitable vulnerability allows high privileged attacker with network access via HTTP to compromise Oracle EDI Gateway. Successful attacks of this vulnerability can result in takeover of Oracle EDI Gateway. CVSS 3.1 Base Score 7.2 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H). |
| Hugging Face Accelerate through 1.14.0 contains a path traversal vulnerability in load_checkpoint_in_model and load_checkpoint_and_dispatch functions that fail to sanitize weight_map entries from sharded checkpoint indexes. Attackers can supply relative paths with ../ sequences or absolute paths to read arbitrary files, or point shard entries at named pipes to cause indefinite blocking and denial of service. |
| NGINX Plus and NGINX Open Source have a vulnerability in the ngx_http_proxy_v2_module and ngx_http_grpc_module modules. This vulnerability exists when the proxy_http_version to 2 or grpc_pass directives are used to proxy HTTP/2 traffic, the ignore_invalid_headers directive is set to off, and the large_client_header_buffers directive size is larger than 2 megabytes. A remote, unauthenticated attacker, along with conditions beyond their control, could send large headers while creating an upstream request. This may cause a heap-based buffer overflow in the NGINX worker process leading to a restart. Additionally, attackers can execute code on systems with Address Space Layout Randomization (ASLR) disabled or when the attacker can bypass ASLR.
Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| The CheckView WordPress plugin before 2.3.2 does not restrict its REST API authentication filter to its own routes and unconditionally discards the authentication error raised for any request whose URI merely contains a CheckView WordPress plugin before 2.3.2-specific string, making it possible for unauthenticated attackers to bypass the REST nonce check and perform any REST action available to a logged-in administrator, such as creating a new administrator account, via a crafted link an administrator is tricked into opening. |
| NGINX Plus and NGINX Open Source have a vulnerability in the ngx_http_slice_module module. When the slice directive and unnamed regex captures are configured or when a background cache update happens, unauthenticated attackers can send requests that may cause uninitialized memory access in the NGINX worker process, leading to limited disclosure of memory or a restart.
Impact:
This vulnerability may allow remote, unauthenticated attackers to have limited control to disclose memory contents or restart the NGINX worker process. There is no control plane exposure; this is a data plane issue only.
Note: The ngx_http_slice_module module is not enabled by default; it's enabled with the --with-http_slice_module configuration parameter.
Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| The Autopay WordPress plugin before 5.0.1 does not perform any capability or nonce check before saving a styling option from a public request, and does not escape that value when it is later output on the checkout page, allowing unauthenticated attackers to store JavaScript that executes in the browser of any user, including administrators, who loads the checkout page. |
