| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix use-after-free of conn->preauth_info in concurrent SMB2 NEGOTIATE
conn->preauth_info is shared connection state (struct
preauth_integrity_info, kmalloc-96) that is allocated and freed by the
SMB2 NEGOTIATE handler and read by the response send path.
smb2_handle_negotiate() allocates conn->preauth_info, and on a
deassemble_neg_contexts() failure kfrees it and sets it to NULL. Both the
allocation and the free/NULL happen under ksmbd_conn_lock(conn) (the
connection srv_mutex), which is held across the whole handler body.
The response send path smb3_preauth_hash_rsp(), called from the send:
block of __handle_ksmbd_work(), reads conn->preauth_info and dereferences
conn->preauth_info->Preauth_HashValue (via
ksmbd_gen_preauth_integrity_hash()) without taking conn_lock. When a
client drives two SMB2 NEGOTIATE requests on the same connection, one
worker can free conn->preauth_info on the failing-negotiate path while a
concurrent send-path worker is reading it, producing a slab
use-after-free read (KASAN-confirmed).
The send-path read tested conn->preauth_info for NULL but raced with the
free that occurs between the NULL check and the dereference, so the NULL
guard alone does not close the window.
Serialize the NEGOTIATE-branch read in smb3_preauth_hash_rsp() under
ksmbd_conn_lock(conn) and re-check conn->preauth_info inside the lock.
Because the negotiate handler holds conn_lock across its kfree + NULL
assignment, a reader that also takes conn_lock either runs fully before
the allocation or fully after the NULL store, and can never observe the
freed-but-not-yet-NULLed pointer. ksmbd_gen_preauth_integrity_hash()
takes no locks itself (it only computes a SHA-512 over the buffer), so
no lock-ordering inversion is introduced, and conn_lock is a sleepable
mutex which is safe on this send path (it already performs network I/O). |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_meta_bridge: fix NFT_META_BRI_IIFPVID stack leak
This needs to test for nonzero retval. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ipset: Don't use test_bit() in lockless RCU readers in hash types
Sashiko pointed out that there are a few lockless RCU readers
using test_bit() which is a relaxed atomic operation and
provides no memory barrier guarantees. Use test_bit_acquire()
instead where the operation may run parallel with add/del/gc,
i.e. is not one from the next cases
- protected by region lock
- in a set destroy phase
- in a new/temporary set creation phase |
| A security vulnerability has been detected in TRENDnet TEW-WLC100P 12.07b01. Affected by this vulnerability is an unknown functionality of the file /sbin/netifd of the component DHCP blobmsg Handler. The manipulation leads to stack-based buffer overflow. The attack must be carried out from within the local network. The exploit has been disclosed publicly and may be used. |
| An uncontrolled search path element in Kiro CLI before version 2.10.0 on Windows might allow a remote unauthenticated actor to execute arbitrary code via a maliciously crafted project directory containing an executable that bypasses workspace trust protections when a local user starts Kiro CLI in the directory.
To remediate this issue, users should upgrade to version 2.10.0 or higher. |
| An uncontrolled search path element in Kiro IDE before version 1.0.228 on Windows might allow a remote unauthenticated actor to execute arbitrary code via a maliciously crafted project directory containing an executable that bypasses workspace trust protections when a local user opens the directory.
To remediate this issue, users should upgrade to version 1.0.228 or higher. |
| An out-of-bounds write issue in the Base64 decoder in Amazon aws-sdk-cpp before 1.11.862 might allow a remote authenticated user to cause a crash or heap memory corruption in an application that processes crafted Base64-encoded input.
To remediate this issue, users should upgrade to version 1.11.862. |
| A stack buffer overflow was found in Internationl components for unicode (ICU ). While running the genrb binary, the 'subtag' struct overflowed at the SRBRoot::addTag function. This issue may lead to memory corruption and local arbitrary code execution. |
| A path traversal flaw was found in SSSD's AD GPO provider. The ad_gpo_extract_smb_components() function does not sanitize .. sequences in the gPCFileSysPath LDAP attribute, allowing an attacker with AD GPO management access to write files outside the GPO cache directory as root. On default RHEL configurations with SELinux enforcing, this can be used to inject Kerberos configuration leading to authentication bypass. |
| Duplicate of CVE-2026-50236. This CVE ID was reserved in error for a finding that already had an existing CVE assignment. |
| An out-of-bounds read issue in the Base64 decoder in Amazon aws-sdk-cpp before 1.11.862, on some platforms, might allow a remote authenticated user to crash an application that processes crafted Base64-encoded input.
To remediate this issue, users should upgrade to version 1.11.862. |
| A flaw was found in BlueZ. Insufficient validation of packet length fields in GetFolderItems responses within the Audio/Video Remote Control Profile (AVRCP) implementation allows a malicious Bluetooth device within range to cause an out-of-bounds memory read. This vulnerability, affecting the parse_media_element() and parse_media_folder() functions, can lead to a crash of the bluetoothd daemon, resulting in a Denial of Service (DoS). It could also potentially expose sensitive heap memory contents. Exploitation requires user interaction to pair with the malicious device. |
| ArcadeDB before 26.8.1 fails to bind the authenticated principal (setCurrentUser) on its batch and time-series HTTP handlers. Because no principal is bound on the worker thread, the engine's fine-grained per-type ACL layer (LocalBucket.checkPermissionsOnFile) does not execute for these handlers. In deployments that use per-type or per-group ACLs, a user with database access but only limited per-type permissions can read from and write to types they are not authorized to access by submitting requests to the batch/time-series endpoints. Deployments that rely solely on database-level access control are not affected. |
| ArcadeDB server (com.arcadedb:arcadedb-server) in versions 26.7.3 and earlier fails to propagate the authenticated principal to asynchronous command worker threads. When an HTTP command is submitted with awaitResponse:false, it executes on an async worker whose DatabaseContext has no bound user, causing the scripting authorization gate to become a no-op. A user with only read access to a single database can submit an asynchronous JavaScript (language=js) command via the /api/v1/command endpoint to run code with unrestricted host access (e.g., database.getSecurity().createUser) and create a server-wide administrator, escalating to full administrative control. Fixed in 26.8.1. |
| The Grav API plugin (getgrav/grav-plugin-api, bundled with Grav 2.0's admin-next/API stack) before version 1.0.14 contains an open redirect weakness in SsoController::sanitizeReturnTo(). The function rejects a literal '//' prefix but does not account for browsers normalizing backslashes to slashes in special (http/https) schemes, so a returnTo value such as '/\evil.com' passes the guard and is later resolved by the browser as the protocol-relative URL '//evil.com'. Following a legitimate OAuth login flow, an attacker-supplied returnTo parameter could redirect an authenticated victim to an attacker-controlled site for post-login phishing. Full browser-side exploitability depends on the admin-next SPA's client-side oauth-callback handler and was not independently verified by the reporter. |
| Grav before 2.0.15 contains a stored cross-site scripting vulnerability in the audio and video media rendering through the sourceParsedownElement method. The media URL fragment is concatenated unescaped into rawHtml source elements, allowing attackers to inject arbitrary HTML and JavaScript that executes in viewers' sessions. |
| Grav before 2.0.15 contains a stored cross-site scripting vulnerability in the detectXss() function where unpaired quotes in unquoted attribute values bypass event-handler detection. Authenticated editors can inject event handlers like onerror= that pass validation and execute in visitor browsers when page content is rendered. |
| SiYuan before v3.7.4 contains an incorrect authorization vulnerability in eight publish-mode reader-facing endpoints that filter results using the visibility list instead of the disabled list. Anonymous visitors can discover and read content from documents explicitly marked as forbidden from publishing by accessing search, backlink, asset content, saved criteria, recent documents, graph, and tag endpoints. |
| MLflow is an open source AI engineering platform for agents, large language models, and machine learning models. Prior to 3.15.0, CreateModelVersion accepts a run_id or model_id after _validate_source_run() or _validate_source_model() in mlflow/server/handlers.py verifies only path containment, allowing authenticated users to create a model version that references another user's artifact directory and read files through GET /model-versions/get-artifact without the required READ permission. This issue is fixed in version 3.15.0. |
| Cleartext storage of sensitive information vulnerability in Kriptok Crypto and Information Technologies Industry Trade Inc. Cryptosim allows Retrieve Embedded Sensitive Data.
This issue affects Cryptosim: before 3.1.0.229. |
