| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: elx: efct: Fix I/O leak on unsupported additional CDB
efct_dispatch_fcp_cmd() allocates an efct_io before dispatching an
unsolicited FCP command. If the command has an unsupported additional
CDB, the function returns -EIO before handing the IO to the SCSI layer.
Free the allocated IO before returning from this error path. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: xen: scsiback: Free the command tag on the TMR submit-failure path
scsiback_device_action() obtains a command tag in
scsiback_get_pend_req() and submits a task-management request with
target_submit_tmr(). When target_submit_tmr() fails it returns < 0 and
scsiback jumps to the err: label, which sends a response but frees
nothing, leaking the tag.
Impact: a pvSCSI guest can leak the command tags of a LUN's session,
stopping the LUN, by issuing VSCSIIF_ACT_SCSI_ABORT or RESET requests
whenever target_submit_tmr() fails.
transport_generic_free_cmd() cannot be used here. By the time
target_submit_tmr() returns an error it has already run
__target_init_cmd() (so se_cmd->cmd_kref is one, not zero), and on its
target_get_sess_cmd() error path it has freed se_cmd->se_tmr_req via
core_tmr_release_req() while leaving SCF_SCSI_TMR_CDB set and the
pointer dangling. Letting the command release run target_free_cmd_mem()
would then double-free se_tmr_req.
Use the same helper, which returns just the tag, on this path too. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: reject user command submission without a command BO
amdxdna_drm_submit_execbuf() passes the user-supplied command BO handle
straight into amdxdna_cmd_submit() with drv_cmd == NULL. When the handle
is AMDXDNA_INVALID_BO_HANDLE (0), the block that fetches job->cmd_bo is
skipped, leaving it NULL, and no check rejects it on the user path (the
!job->cmd_bo guard lives inside the != INVALID branch).
The job is then armed and pushed to the DRM scheduler.
aie2_sched_job_run() takes the drv_cmd == NULL path and calls
amdxdna_cmd_set_state(job->cmd_bo) -> amdxdna_gem_vmap(NULL) ->
to_gobj(NULL)->dev, a NULL pointer dereference in the drm_sched worker.
A process with access to the accel node on a system with a probed AMD NPU
can trigger a kernel oops with a single AMDXDNA_EXEC_CMD ioctl
(cmd_handles = 0).
Only internal driver commands (SYNC_DEBUG_BO / ATTACH_DEBUG_BO)
legitimately pass AMDXDNA_INVALID_BO_HANDLE, and they always set drv_cmd.
Reject the invalid handle for user submissions (drv_cmd == NULL) at the
submit choke point so every user path is covered.
Found by 0sec automated security-research tooling (https://0sec.ai). |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: reject command submission on devices without a submit op
amdxdna_cmd_submit() calls xdna->dev_info->ops->cmd_submit()
unconditionally, but only aie2_dev_ops defines that callback.
aie4_vf_ops (the AIE4 SR-IOV virtual function) does not, so a user
AMDXDNA_EXEC_CMD ioctl on an AIE4 device reaches a NULL function-pointer
call and oopses the kernel. AIE4 submits work through a mapped user queue
and doorbell, not this ioctl path.
Reject the submission early with -EOPNOTSUPP when the device provides no
cmd_submit op, so the shared EXEC ioctl is a clean no-op on such devices.
Found by 0sec automated security-research tooling (https://0sec.ai). |
| In the Linux kernel, the following vulnerability has been resolved:
dm-verity: fix a possible NULL pointer dereference
Fix a possible NULL pointer dereference dm_verity_loadpin_is_bdev_trusted
if the device has no table. |
| In the Linux kernel, the following vulnerability has been resolved:
liveupdate: validate session type before performing operation
The sessions ioctls are not applicable to all session types. PRESERVE_FD
is only applicable to outgoing sessions. RETRIEVE_FD and FINISH are only
valid for incoming session. Calling a incoming ioctl on an outgoing
session is invalid and can cause file handlers to run into unexpected
errors.
For example, a user can create a (outgoing) session, preserve a memfd,
and then immediately do a retrieve without doing a kexec in between.
This would result in memfd's retrieve handler to run. The handlers
expects to be called from a post-kexec context, and will try to do a
kho_restore_vmalloc() or kho_restore_folio() to try and restore memory.
KHO catches this (thanks to KHO_PAGE_MAGIC) and returns an error, but
since this is considered an internal error and KHO throws out a bunch of
WARN()s.
Associate a type with each ioctl op and validate the type in
luo_session_ioctl() before dispatching the ioctl handler to make sure
the op is being called for the right session type. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: sdhci-esdhc-imx: disable irq during suspend to fix unhandled interrupt
When using WIFI out-of-band wakeup, an "irq xxx: nobody cared" warning
occurs. This happens because the usdhc interrupt is not disabled during
system suspend when device_may_wakeup() returns false.
The sequence of events leading to this issue:
1. System enters suspend without disabling usdhc interrupt
(because device_may_wakeup() returns false for usdhc device)
2. WIFI out-of-band wakeup triggers system resume via GPIO interrupt
3. WIFI sends a Card interrupt before usdhc has fully resumed
4. usdhc is still in runtime suspend state and cannot handle the
interrupt properly
5. The unhandled interrupt triggers "nobody cared" warning
Fix this by unconditionally disabling the usdhc interrupt during suspend
and re-enabling it during resume, regardless of the wakeup capability.
This ensures no interrupts are processed during the suspend/resume
transition. |
| In the Linux kernel, the following vulnerability has been resolved:
llc: fix SAP refcount leak in llc_ui_autobind()
llc_ui_autobind() opens a SAP after choosing a dynamic LSAP.
llc_sap_open() returns a reference owned by the caller, and
llc_sap_add_socket() takes a second reference for the socket's
membership in the SAP hash tables.
llc_ui_bind() drops the caller's reference after adding the socket,
but llc_ui_autobind() keeps it. When the socket is closed,
llc_sap_remove_socket() releases only the socket reference, leaving
the SAP on llc_sap_list with sk_count == 0.
This is user-visible because repeated autobind and close cycles can consume
all dynamic SAP values and make later autobinds fail with -EUSERS.
Drop the caller's reference after a successful autobind, matching
llc_ui_bind()'s ownership model. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: HWS, fix matcher leak on resize target setup failure
hws_bwc_matcher_move() allocates a replacement matcher before setting it
as the resize target. If mlx5hws_matcher_resize_set_target() fails, the
replacement matcher is not attached anywhere and is leaked.
Fix the leak by destroying the replacement matcher before returning from
the resize-target failure path.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still
present in v7.1.1.
An x86_64 allyesconfig build showed no new warnings. As we do not have a
mlx5 HWS-capable device to test with, no runtime testing was able to be
performed. |
| In the Linux kernel, the following vulnerability has been resolved:
net: liquidio: fix BAR resource leak on PF number failure
If cn23xx_get_pf_num() fails, the function returns without
unmapping either BAR. Unmap both BARs before returning from
the error path.
Found by manual code review. |
| The Backup Migration WordPress plugin before 2.1.7 does not properly restrict a post-restore automatic login mechanism, allowing a user who administers one site of a multisite network to obtain a long-lived authenticated session as an administrator of another site in the same network, without credentials and bypassing two-factor authentication. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: fix memory leak in ieee80211_register_hw()
If kmemdup() fails while copying supported band structures, the error
path jumps to fail_rate. This skips rate_control_deinitialize() and
leaks the initialized local->rate_ctrl.
Fix this by adding a fail_band label that shares the rate-control cleanup
path before falling through to the remaining teardown.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still present in
v7.1-rc7.
An x86_64 allyesconfig build showed no new warnings. As we do not have a
suitable mac80211 device/driver combination to test with, no runtime
testing was able to be performed. |
| In the Linux kernel, the following vulnerability has been resolved:
pmdomain: imx: Fix i.MX8MP VC8000E power up sequence
Per errata[1]:
ERR050531: VPU_NOC power down handshake may hang during VC8000E/VPUMIX
power up/down cycling.
Description: VC8000E reset de-assertion edge and AXI clock may have a
timing issue.
Workaround: Set bit2 (vc8000e_clk_en) of BLK_CLK_EN_CSR to 0 to gate off
both AXI clock and VC8000E clock sent to VC8000E and AXI clock sent to
VPU_NOC m_v_2 interface during VC8000E power up(VC8000E reset is
de-asserted by HW)
Add a bool variable is_errata_err050531 in
'struct imx8m_blk_ctrl_domain_data' to represent whether the workaround
is needed. If is_errata_err050531 is true, first clear the clk before
powering up gpc, then enable the clk after powering up gpc.
[1] https://www.nxp.com/webapp/Download?colCode=IMX8MP_1P33A |
| In the Linux kernel, the following vulnerability has been resolved:
fs/resctrl: Fix double-add of pseudo-locked region's RMID to free list
A pseudo-locked group's RMID is freed when it is created. On unmount
rmdir_all_sub() unconditionally frees all RMID of all groups, resulting
in a double-free of the pseudo-locked group's RMID. The consequence of this
is that the original free results in the pseudo-locked group's RMID being
added to the rmid_free_lru linked list and the second free then attempts
to add the same RMID entry to the rmid_free_lru again.
Do not double-free a pseudo-locked group's RMID. |
| In the Linux kernel, the following vulnerability has been resolved:
cpu/hotplug: Fix NULL kobject warning in cpuhp_smt_enable()
On arm64, when booting with `maxcpus` greater than the number of present
CPUs (e.g., QEMU -smp cpus=4,maxcpus=8), some CPUs are marked as 'present'
but have not yet been registered via register_cpu(). Consequently,
the per-cpu device objects for these CPUs are not yet initialized.
In cpuhp_smt_enable(), the code iterates over all present CPUs. Calling
_cpu_up() for these unregistered CPUs eventually leads to
sysfs_create_group() being called with a NULL kobject (or a kobject
without a directory), triggering the following warning in
fs/sysfs/group.c:
WARNING: fs/sysfs/group.c:137 at internal_create_group+0x41c/0x4bc, CPU#2: sh/181
[...]
Call trace:
internal_create_group+0x41c/0x4bc (P)
sysfs_create_group+0x18/0x24
topology_add_dev+0x1c/0x28
cpuhp_invoke_callback+0x104/0x20c
__cpuhp_invoke_callback_range+0x94/0x11c
_cpu_up+0x200/0x37c
When booting with ACPI, arm64 smp_prepare_cpus() currently sets all
enumerated CPUs as "present" regardless of their status in the MADT. This
causes issues with SMT hotplug control. For instance, with QEMU's
"-smp 4,maxcpus=8" configuration, the MADT GICC entries are populated as
follows:
1. The first four CPUs: `Enabled` set but `Online Capable` not set.
2. The remaining four CPUs: `Online Capable` set but `Enabled` not set
to support potential hot-plugging.
Fix this by:
1. When booting with ACPI, checking the ACPI_MADT_ENABLED flag in the GICC
entry before calling set_cpu_present() during SMP initialization.
2. Properly managing the present mask in acpi_map_cpu() and
acpi_unmap_cpu() to support actual CPU hotplug events, This aligns with
other architectures like x86 and LoongArch.
3. Update the arm64 CPU hotplug documentation to no longer state that all
online-capable vCPUs are marked as present by the kernel at boot time.
This ensures that only physically available or explicitly enabled CPUs
are in the present mask, keeping the SMT control logic consistent with
the actual hardware state. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: atm: ueagle-atm: wait for pre-firmware load in .disconnect()
ueagle-atm uses the asynchronous request_firmware_nowait() in .probe(),
but does not wait for its completion, not even in .disconnect(); so, if the
device is unplugged meanwhile, its teardown runs concurrently with that.
Even though this inconsistency is worth addressing on its own, it has also
triggered several bug reports in syzbot over the years (some auto-closed)
where the firmware sysfs fallback mechanism (CONFIG_FW_LOADER_USER_HELPER)
creates a firmware subdirectory in the device directory during its removal,
which might hit unexpected conditions in kernfs, apparently, depending at
which point the add and remove operations raced. (See links.)
The pattern is:
usb ?-?: Direct firmware load for ueagle-atm/eagle?.fw failed with error -2
usb ?-?: Falling back to sysfs fallback for: ueagle-atm/eagle?.fw
<ERROR>
Call trace:
...
kernfs_create_dir_ns
sysfs_create_dir_ns
create_dir
kobject_add_internal
kobject_add_varg
kobject_add
class_dir_create_and_add
get_device_parent
device_add
fw_load_sysfs_fallback
fw_load_from_user_helper
firmware_fallback_sysfs
_request_firmware
request_firmware_work_func
...
(Some variations are observed, after fw_load_sysfs_fallback(), e.g., [1].)
While the kernfs side is being looked at, the ueagle-atm side can be fixed
by waiting for the pre-firmware load in the .disconnect() handler.
This change has a similar approach to previous work by Andrey Tsygunka [2]
(wait_for_completion() in .disconnect()), but it is relatively different in
design/implementation; using the Originally-by tag for credit assignment.
This has been tested with:
- synthetic reproducer to check the error path;
- USB gadget (virtual device) to check the firmware upload path;
- QEMU device emulator to check the device ID re-enumeration path;
(The latter two were written by Claude; no other code/text in this commit.)
Links (year first reported):
2025 https://syzbot.org/bug?extid=ce1e5a1b4e086b43e56d
2025 https://syzbot.org/bug?extid=9af8471255ac36e34fd4
2024 https://syzbot.org/bug?extid=306212936b13e520679d
2023 https://syzkaller.appspot.com/bug?extid=457452d30bcdda75ead2
2022 https://syzbot.org/bug?extid=782984d6f1701b526edb
2021 https://syzbot.org/bug?id=f3f221579f4ef7e9691281f3c6f56c05f83e8490
2021 https://syzbot.org/bug?id=84d86f0d71394829df6fc53daf6642c045983881
2021 https://syzbot.org/bug?id=3302dc1c0e2b9c94f2e8edb404eabc9267bc6f90
[1] https://syzkaller.appspot.com/bug?extid=457452d30bcdda75ead2
[2] https://lore.kernel.org/lkml/[email protected]/ |
| The ECS WordPress plugin before 4.3.8 does not check the post status or any capability when rendering an Elementor document requested through one of its AJAX actions, allowing unauthenticated users to retrieve the rendered content of unpublished (private, draft, pending) documents by supplying their identifier. |
| The ECS WordPress plugin before 4.3.8 does not perform capability or object-ownership checks on its Dynamic Repeater AJAX handlers (gated only by a capability-agnostic nonce that any edit_posts user obtains from the Elementor editor), so a Contributor can write a data-source binding into any post — including admin-authored pages — whose attacker-controlled values are rendered into a widget's repeater output without sanitization, executing JavaScript in the session of any visitor or administrator who views the page. |
| The Simply Schedule Appointments WordPress plugin before 1.6.12.17 does not restrict the user records returned by some of its REST endpoints to those the requester is entitled to see, allowing users with a low-privileged staff role to disclose the names and email addresses of arbitrary registered users. |
| The Product Feed PRO for WooCommerce by AdTribes WordPress plugin before 13.5.7 does not perform an authorization check on one of its REST read routes, allowing unauthenticated users to disclose a store's feed configuration (rules, filters and field mapping) and to enumerate the full product category taxonomy. |
