| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| HCL Workload Scheduler stores user credentials in plain text which can be read by a local user. |
| Sensitive data could be exposed to non- privileged users in a configuration file. Local access to the computer with a low- privileged account is required to access the configuration file containing the sensitive data. |
| In the Linux kernel, the following vulnerability has been resolved:
selinux: enable use of both GFP_KERNEL and GFP_ATOMIC in convert_context()
The following warning was triggered on a hardware environment:
SELinux: Converting 162 SID table entries...
BUG: sleeping function called from invalid context at
__might_sleep+0x60/0x74 0x0
in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 5943, name: tar
CPU: 7 PID: 5943 Comm: tar Tainted: P O 5.10.0 #1
Call trace:
dump_backtrace+0x0/0x1c8
show_stack+0x18/0x28
dump_stack+0xe8/0x15c
___might_sleep+0x168/0x17c
__might_sleep+0x60/0x74
__kmalloc_track_caller+0xa0/0x7dc
kstrdup+0x54/0xac
convert_context+0x48/0x2e4
sidtab_context_to_sid+0x1c4/0x36c
security_context_to_sid_core+0x168/0x238
security_context_to_sid_default+0x14/0x24
inode_doinit_use_xattr+0x164/0x1e4
inode_doinit_with_dentry+0x1c0/0x488
selinux_d_instantiate+0x20/0x34
security_d_instantiate+0x70/0xbc
d_splice_alias+0x4c/0x3c0
ext4_lookup+0x1d8/0x200 [ext4]
__lookup_slow+0x12c/0x1e4
walk_component+0x100/0x200
path_lookupat+0x88/0x118
filename_lookup+0x98/0x130
user_path_at_empty+0x48/0x60
vfs_statx+0x84/0x140
vfs_fstatat+0x20/0x30
__se_sys_newfstatat+0x30/0x74
__arm64_sys_newfstatat+0x1c/0x2c
el0_svc_common.constprop.0+0x100/0x184
do_el0_svc+0x1c/0x2c
el0_svc+0x20/0x34
el0_sync_handler+0x80/0x17c
el0_sync+0x13c/0x140
SELinux: Context system_u:object_r:pssp_rsyslog_log_t:s0:c0 is
not valid (left unmapped).
It was found that within a critical section of spin_lock_irqsave in
sidtab_context_to_sid(), convert_context() (hooked by
sidtab_convert_params.func) might cause the process to sleep via
allocating memory with GFP_KERNEL, which is problematic.
As Ondrej pointed out [1], convert_context()/sidtab_convert_params.func
has another caller sidtab_convert_tree(), which is okay with GFP_KERNEL.
Therefore, fix this problem by adding a gfp_t argument for
convert_context()/sidtab_convert_params.func and pass GFP_KERNEL/_ATOMIC
properly in individual callers.
[PM: wrap long BUG() output lines, tweak subject line] |
| A remote code execution (RCE) vulnerability in the component /PluXml/core/admin/parametres_edittpl.php of PluXml v5.8.16 and lower allows attackers to execute arbitrary code via injecting a crafted payload into a template. |
| eLabFTW is an open source electronic lab notebook for research labs. The application served uploaded SVG files inline. Because SVG supports active content, an attacker could upload a crafted SVG that executes script when viewed, resulting in stored XSS under the application origin. A victim who opens the SVG URL or any page embedding it could have their session hijacked, data exfiltrated, or actions performed on their behalf. This vulnerability is fixed n 5.3.0. |
| Incorrect default permissions vulnerability in Evoko Home, affecting version 2.4.2 to 2.7.4. A non-admin user could exploit weak file and folder permissions to escalate privileges, execute arbitrary code and maintain persistence on the compromised machine. It has been identified that full control permissions exist on the ‘Everyone’ group (i.e. any user who has local access to the operating system regardless of their privileges). |
| A DOM based cross-site scripting (XSS) vulnerability in the component /beep/Beep.Instrument.js of stewdio beep.js before commit ef22ad7 allows attackers to execute arbitrary Javascript via sending a crafted URL. |
| PrivateBin is an online pastebin where the server has zero knowledge of pasted data. Versions 1.7.7 through 2.0.1 allow persistent HTML injection via the unsanitized attachment filename (attachment_name) when attachments are enabled. An attacker can modify attachment_name before encryption so that, after decryption, arbitrary HTML is inserted unescaped into the page near the file size hint, enabling redirect (e.g., meta refresh) and site defacement and related phishing attacks. Script execution is normally blocked by the recommended Content Security Policy, limiting confidentiality impact. The issue was introduced in 1.7.7 and fixed in 2.0.2. Update to 2.0.2 or later. Workarounds include enforcing the recommended CSP, deploying PrivateBin on a separate domain, or disabling attachments. |
| CKAN is an open-source DMS (data management system) for powering data hubs and data portals. Prior to 2.10.9 and 2.11.4, session ids could be fixed by an attacker if the site is configured with server-side session storage (CKAN uses cookie-based session storage by default). The attacker would need to either set a cookie on the victim's browser or steal the victim's currently valid session. Session identifiers are now regenerated after each login. This vulnerability has been fixed in CKAN 2.10.9 and 2.11.4 |
| In the Linux kernel, the following vulnerability has been resolved:
USB: gadget: Fix use-after-free during usb config switch
In the process of switching USB config from rndis to other config,
if the hardware does not support the ->pullup callback, or the
hardware encounters a low probability fault, both of them may cause
the ->pullup callback to fail, which will then cause a system panic
(use after free).
The gadget drivers sometimes need to be unloaded regardless of the
hardware's behavior.
Analysis as follows:
=======================================================================
(1) write /config/usb_gadget/g1/UDC "none"
gether_disconnect+0x2c/0x1f8
rndis_disable+0x4c/0x74
composite_disconnect+0x74/0xb0
configfs_composite_disconnect+0x60/0x7c
usb_gadget_disconnect+0x70/0x124
usb_gadget_unregister_driver+0xc8/0x1d8
gadget_dev_desc_UDC_store+0xec/0x1e4
(2) rm /config/usb_gadget/g1/configs/b.1/f1
rndis_deregister+0x28/0x54
rndis_free+0x44/0x7c
usb_put_function+0x14/0x1c
config_usb_cfg_unlink+0xc4/0xe0
configfs_unlink+0x124/0x1c8
vfs_unlink+0x114/0x1dc
(3) rmdir /config/usb_gadget/g1/functions/rndis.gs4
panic+0x1fc/0x3d0
do_page_fault+0xa8/0x46c
do_mem_abort+0x3c/0xac
el1_sync_handler+0x40/0x78
0xffffff801138f880
rndis_close+0x28/0x34
eth_stop+0x74/0x110
dev_close_many+0x48/0x194
rollback_registered_many+0x118/0x814
unregister_netdev+0x20/0x30
gether_cleanup+0x1c/0x38
rndis_attr_release+0xc/0x14
kref_put+0x74/0xb8
configfs_rmdir+0x314/0x374
If gadget->ops->pullup() return an error, function rndis_close() will be
called, then it will causes a use-after-free problem.
======================================================================= |
| In the Linux kernel, the following vulnerability has been resolved:
virtio-crypto: fix memory leak in virtio_crypto_alg_skcipher_close_session()
'vc_ctrl_req' is alloced in virtio_crypto_alg_skcipher_close_session(),
and should be freed in the invalid ctrl_status->status error handling
case. Otherwise there is a memory leak. |
| An issue in the BdApiUtil driver of Baidu Antivirus v5.2.3.116083 allows attackers to terminate arbitrary process via executing a BYOVD (Bring Your Own Vulnerable Driver) attack. |
| In the Linux kernel, the following vulnerability has been resolved:
devlink: hold region lock when flushing snapshots
Netdevsim triggers a splat on reload, when it destroys regions
with snapshots pending:
WARNING: CPU: 1 PID: 787 at net/core/devlink.c:6291 devlink_region_snapshot_del+0x12e/0x140
CPU: 1 PID: 787 Comm: devlink Not tainted 6.1.0-07460-g7ae9888d6e1c #580
RIP: 0010:devlink_region_snapshot_del+0x12e/0x140
Call Trace:
<TASK>
devl_region_destroy+0x70/0x140
nsim_dev_reload_down+0x2f/0x60 [netdevsim]
devlink_reload+0x1f7/0x360
devlink_nl_cmd_reload+0x6ce/0x860
genl_family_rcv_msg_doit.isra.0+0x145/0x1c0
This is the locking assert in devlink_region_snapshot_del(),
we're supposed to be holding the region->snapshot_lock here. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: visconti: Fix memory leak in visconti_register_pll()
@pll->rate_table has allocated memory by kmemdup(), if clk_hw_register()
fails, it should be freed, otherwise it will cause memory leak issue,
this patch fixes it. |
| Tunnelblick 3.5beta06 before 7.0, when incompletely uninstalled, allows attackers to execute arbitrary code as root (upon the next boot) by dragging a crafted Tunnelblick.app file into /Applications. |
| flask-boilerplate through a170e7c allows account takeover via the password reset feature because SERVER_NAME is not configured and thus a reset depends on the Host HTTP header. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/apic: Don't disable x2APIC if locked
The APIC supports two modes, legacy APIC (or xAPIC), and Extended APIC
(or x2APIC). X2APIC mode is mostly compatible with legacy APIC, but
it disables the memory-mapped APIC interface in favor of one that uses
MSRs. The APIC mode is controlled by the EXT bit in the APIC MSR.
The MMIO/xAPIC interface has some problems, most notably the APIC LEAK
[1]. This bug allows an attacker to use the APIC MMIO interface to
extract data from the SGX enclave.
Introduce support for a new feature that will allow the BIOS to lock
the APIC in x2APIC mode. If the APIC is locked in x2APIC mode and the
kernel tries to disable the APIC or revert to legacy APIC mode a GP
fault will occur.
Introduce support for a new MSR (IA32_XAPIC_DISABLE_STATUS) and handle
the new locked mode when the LEGACY_XAPIC_DISABLED bit is set by
preventing the kernel from trying to disable the x2APIC.
On platforms with the IA32_XAPIC_DISABLE_STATUS MSR, if SGX or TDX are
enabled the LEGACY_XAPIC_DISABLED will be set by the BIOS. If
legacy APIC is required, then it SGX and TDX need to be disabled in the
BIOS.
[1]: https://aepicleak.com/aepicleak.pdf |
| Cursor is a code editor built for programming with AI. In versions and below, a vulnerability in the Cursor CLI Beta allowed an attacker to achieve remote code execution through the MCP (Model Context Protocol) server mechanism by uploading a malicious MCP configuration in .cursor/mcp.json file in a GitHub repository. Once a victim clones the project and opens it using Cursor CLI, the command to run the malicious MCP server is immediately executed without any warning, leading to potential code execution as soon as the command runs. This issue is fixed in version 2025.09.17-25b418f. |
| User management functionality in SAP NetWeaver Application Server Java is vulnerable to Stored Cross-Site Scripting (XSS). This could enable an attacker to inject malicious payload that gets stored and executed when a user accesses the functionality, hence leading to information disclosure or unauthorized data modifications within the scope of victim�s browser. There is no impact on availability. |
| In the Linux kernel, the following vulnerability has been resolved:
media: ipu3-imgu: Fix NULL pointer dereference in active selection access
What the IMGU driver did was that it first acquired the pointers to active
and try V4L2 subdev state, and only then figured out which one to use.
The problem with that approach and a later patch (see Fixes: tag) is that
as sd_state argument to v4l2_subdev_get_try_crop() et al is NULL, there is
now an attempt to dereference that.
Fix this.
Also rewrap lines a little. |