| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Execution with Unnecessary Privileges, : Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Apache Software Foundation Apache Airflow.The "Run Task" feature enables authenticated user to bypass some of the restrictions put in place. It allows to execute code in the webserver context as well as allows to bypas limitation of access the user has to certain DAGs. The "Run Task" feature is considered dangerous and it has been removed entirely in Airflow 2.6.0
This issue affects Apache Airflow: before 2.6.0. |
| Westermo EDW-100 devices through 2024-05-03 allow an unauthenticated user to download a configuration file containing a cleartext password. NOTE: this is a serial-to-Ethernet converter that should not be placed at the edge of the network. |
| An issue in Debezium Community debezium-ui v.2.5 allows a local attacker to execute arbitrary code via the refresh page function. |
| Execution with unnecessary privileges issue exists in Defense Platform Home Edition Ver.3.9.51.x and earlier. If an attacker performs a specific operation, SYSTEM privilege of the Windows system where the product is running may be obtained. |
| A vulnerability exists in the VideONet product included in the listed System 800xA versions, where VideONet is used.
An attacker who successfully exploited the vulnerability could, in the worst case scenario, stop or manipulate the video feed.
This issue affects System 800xA: 5.1.X; System 800xA: 6.0.3.X; System 800xA: 6.1.1.X; System 800xA: 6.2.X. |
| SMM callout vulnerability within the AmdPlatformRasSspSmm driver could allow a ring 0 attacker to modify boot services handlers, potentially resulting in arbitrary code execution. |
| A vulnerability has been identified in RUGGEDCOM RM1224 LTE(4G) EU (6GK6108-4AM00-2BA2) (All versions < V8.0), RUGGEDCOM RM1224 LTE(4G) NAM (6GK6108-4AM00-2DA2) (All versions < V8.0), SCALANCE M804PB (6GK5804-0AP00-2AA2) (All versions < V8.0), SCALANCE M812-1 ADSL-Router (6GK5812-1AA00-2AA2) (All versions < V8.0), SCALANCE M812-1 ADSL-Router (6GK5812-1BA00-2AA2) (All versions < V8.0), SCALANCE M816-1 ADSL-Router (6GK5816-1AA00-2AA2) (All versions < V8.0), SCALANCE M816-1 ADSL-Router (6GK5816-1BA00-2AA2) (All versions < V8.0), SCALANCE M826-2 SHDSL-Router (6GK5826-2AB00-2AB2) (All versions < V8.0), SCALANCE M874-2 (6GK5874-2AA00-2AA2) (All versions < V8.0), SCALANCE M874-3 (6GK5874-3AA00-2AA2) (All versions < V8.0), SCALANCE M876-3 (6GK5876-3AA02-2BA2) (All versions < V8.0), SCALANCE M876-3 (ROK) (6GK5876-3AA02-2EA2) (All versions < V8.0), SCALANCE M876-4 (6GK5876-4AA10-2BA2) (All versions < V8.0), SCALANCE M876-4 (EU) (6GK5876-4AA00-2BA2) (All versions < V8.0), SCALANCE M876-4 (NAM) (6GK5876-4AA00-2DA2) (All versions < V8.0), SCALANCE MUM853-1 (EU) (6GK5853-2EA00-2DA1) (All versions < V8.0), SCALANCE MUM856-1 (EU) (6GK5856-2EA00-3DA1) (All versions < V8.0), SCALANCE MUM856-1 (RoW) (6GK5856-2EA00-3AA1) (All versions < V8.0), SCALANCE S615 EEC LAN-Router (6GK5615-0AA01-2AA2) (All versions < V8.0), SCALANCE S615 LAN-Router (6GK5615-0AA00-2AA2) (All versions < V8.0), SCALANCE WAB762-1 (6GK5762-1AJ00-6AA0) (All versions < V3.0.0), SCALANCE WAM763-1 (6GK5763-1AL00-7DA0) (All versions < V3.0.0), SCALANCE WAM763-1 (ME) (6GK5763-1AL00-7DC0) (All versions < V3.0.0), SCALANCE WAM763-1 (US) (6GK5763-1AL00-7DB0) (All versions < V3.0.0), SCALANCE WAM766-1 (6GK5766-1GE00-7DA0) (All versions < V3.0.0), SCALANCE WAM766-1 (ME) (6GK5766-1GE00-7DC0) (All versions < V3.0.0), SCALANCE WAM766-1 (US) (6GK5766-1GE00-7DB0) (All versions < V3.0.0), SCALANCE WAM766-1 EEC (6GK5766-1GE00-7TA0) (All versions < V3.0.0), SCALANCE WAM766-1 EEC (ME) (6GK5766-1GE00-7TC0) (All versions < V3.0.0), SCALANCE WAM766-1 EEC (US) (6GK5766-1GE00-7TB0) (All versions < V3.0.0), SCALANCE WUB762-1 (6GK5762-1AJ00-1AA0) (All versions < V3.0.0), SCALANCE WUB762-1 iFeatures (6GK5762-1AJ00-2AA0) (All versions < V3.0.0), SCALANCE WUM763-1 (6GK5763-1AL00-3AA0) (All versions < V3.0.0), SCALANCE WUM763-1 (6GK5763-1AL00-3DA0) (All versions < V3.0.0), SCALANCE WUM763-1 (US) (6GK5763-1AL00-3AB0) (All versions < V3.0.0), SCALANCE WUM763-1 (US) (6GK5763-1AL00-3DB0) (All versions < V3.0.0), SCALANCE WUM766-1 (6GK5766-1GE00-3DA0) (All versions < V3.0.0), SCALANCE WUM766-1 (ME) (6GK5766-1GE00-3DC0) (All versions < V3.0.0), SCALANCE WUM766-1 (USA) (6GK5766-1GE00-3DB0) (All versions < V3.0.0). Affected devices can be configured to send emails when certain events occur on the device. When presented with an invalid response from the SMTP server, the device triggers an error that disrupts email sending. An attacker with access to the network can use this to do disable notification of users when certain events occur. |
| ONTAP Select Deploy administration utility versions 9.12.1.x,
9.13.1.x and 9.14.1.x contain hard-coded credentials that could allow an
attacker to view Deploy configuration information and modify the
account credentials.
|
|
Use of reversible password encryption algorithm allows attackers to decrypt passwords. Sensitive information can be easily unencrypted by the attacker, stolen credentials can be used for arbitrary actions to corrupt the system.
|
| An Unchecked Return Value vulnerability in the Routing Protocol Daemon (rpd) on Juniper Networks Junos OS and Juniper Networks Junos OS Evolved allows a logically adjacent, unauthenticated attacker sending a specific PIM packet to cause rpd to crash and restart, resulting in a Denial of Service (DoS), when PIM is configured with Multicast-only Fast Reroute (MoFRR). Continued receipt and processing of this packet may create a sustained Denial of Service (DoS) condition.
This issue is observed on Junos and Junos Evolved platforms where PIM is configured along with MoFRR. MoFRR tries to select the active path, but due to an internal timing issue, rpd is unable to select the forwarding next-hop towards the source, resulting in an rpd crash.
This issue affects:
Junos OS:
* All versions before 20.4R3-S10,
* from 21.2 before 21.2R3-S7,
* from 21.4 before 21.4R3-S6,
* from 22.1 before 22.1R3-S5,
* from 22.2 before 22.2R3-S3,
* from 22.3 before 22.3R3,
* from 22.4 before 22.4R2;
Junos OS Evolved:
* All versions before 20.4R3-S10 -EVO,
* All versions of 21.2-EVO,
* from 21.4-EVO before 21.4R3-S9-EVO,
* from 22.1-EVO before 22.1R3-S5-EVO,
* from 22.2-EVO before 22.2R3-S3-EVO,
* from 22.3-EVO before 22.3R3-EVO,
* from 22.4-EVO before 22.4R2-EVO. |
| A use of hard-coded password vulnerability may allow authentication abuse.This issue affects ELI 380 Resting Electrocardiograph:
Versions 2.6.0 and prior; ELI 280/BUR280/MLBUR 280 Resting Electrocardiograph:
Versions 2.3.1 and prior; ELI 250c/BUR 250c Resting Electrocardiograph:
Versions 2.1.2 and prior; ELI 150c/BUR 150c/MLBUR 150c Resting Electrocardiograph:
Versions 2.2.0 and prior. |
| A CWE-257: Storing Passwords in a Recoverable Format vulnerability exists that could result in unwanted access to a DCE instance when performed over a network by a malicious third-party. Affected Products: Data Center Expert (Versions prior to V7.9.0) |
| Plaintext Storage of a Password vulnerability in Secomea GateManager (USB wizard) allows Authentication abuse on SiteManager, if the generated file is leaked. |
| Dell VxVerify, versions prior to x.40.405, contain a Plain-text Password Storage Vulnerability in the shell wrapper. A local high privileged attacker could potentially exploit this vulnerability, leading to the disclosure of certain user credentials. The attacker may be able to use the exposed credentials to access the vulnerable component with privileges of the compromised account. |
| EventStoreDB (ESDB) is an operational database built to store events. A vulnerability has been identified in the projections subsystem in versions 20 prior to 20.10.6, 21 prior to 21.10.11, 22 prior to 22.10.5, and 23 prior to 23.10.1. Only database instances that use custom projections are affected by this vulnerability. User passwords may become accessible to those who have access to the chunk files on disk, and users who have read access to system streams. Only users in the `$admins` group can access system streams by default. ESDB 23.10.1, 22.10.5, 21.10.11, and 20.10.6 contain a patch for this issue. Users should upgrade EventStoreDB, reset the passwords for current and previous members of `$admins` and `$ops` groups, and, if a password was reused in any other system, reset it in those systems to a unique password to follow best practices. If an upgrade cannot be done immediately, reset the passwords for current and previous members of `$admins` and `$ops` groups. Avoid creating custom projections until the patch has been applied. |
| Dell OpenManage Enterprise, versions 4.0.0 and 4.0.1, contains a sensitive information disclosure vulnerability. A local low privileged malicious user could potentially exploit this vulnerability to obtain credentials leading to unauthorized access with elevated privileges. This could lead to further attacks, thus Dell recommends customers to upgrade at the earliest opportunity. |
| IBM Security Verify Access Appliance 10.0.0 through 10.0.8
could allow a locally authenticated non-administrative user to escalate their privileges due to unnecessary permissions used to perform certain tasks. |
| Dell NativeEdge, version(s) 2.1.0.0, contain(s) an Execution with Unnecessary Privileges vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Elevation of privileges. |
| A vulnerability has been identified in SIMATIC Cloud Connect 7 CC712 (All versions >= V2.0 < V2.1), SIMATIC Cloud Connect 7 CC712 (All versions < V2.1), SIMATIC Cloud Connect 7 CC716 (All versions >= V2.0 < V2.1), SIMATIC Cloud Connect 7 CC716 (All versions < V2.1). The affected device uses a hard-coded password to protect the diagnostic files. This could allow an authenticated attacker to access protected data. |
| Dell Update Manager Plugin, versions 1.4.0 through 1.5.0, contains a Plain-text Password Storage Vulnerability in Log file. A remote high privileged attacker could potentially exploit this vulnerability, leading to the disclosure of certain user credentials. The attacker may be able to use the exposed credentials to access the vulnerable application with privileges of the compromised account. |
