| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Files or directories accessible to external parties issue exists in SS1 Ver.16.0.0.10 and earlier (Media version:16.0.0a and earlier). If exploited, uploaded files and SS1 configuration files may be accessed by a remote unauthenticated attacker. |
| Xenforo 2.2.13 contains a stored cross-site scripting vulnerability that allows authenticated administrators to inject malicious scripts through the smilie category title parameter. Attackers can create a smilie category with a malicious script that will execute when the admin panel is loaded, potentially enabling further client-side attacks. |
| A Path Traversal vulnerability exists in the `/wipe_database` endpoint of parisneo/lollms version v12, allowing an attacker to delete any directory on the system. The vulnerability arises from improper validation of the `key` parameter, which is used to construct file paths. An attacker can exploit this by sending a specially crafted HTTP request to delete arbitrary directories. |
| An authentication bypass vulnerability in the /web/um_open_telnet.cgi endpoint in Nexxt Solutions NCM-X1800 Mesh Router firmware UV1.2.7 and below, allowing an attacker to remotely enable the Telnet service without authentication, bypassing security controls. The Telnet server is then accessible with hard-coded credentials, allowing attackers to gain administrative shell access and execute arbitrary commands on the device. |
| Multiple CWE-476 NULL Pointer Dereference vulnerabilities were found in GoAhead Web Server up to version 6.0.0 when compiled with the ME_GOAHEAD_REPLACE_MALLOC flag. Without a memory notifier for allocation failures, remote attackers can exploit these vulnerabilities by sending malicious requests, leading to a crash and Denial of Service (DoS). |
| A vulnerability exists in NSD570 login panel that does not restrict excessive authentication attempts. If exploited, this could
cause account takeover and unauthorized access to the system
when an attacker conducts brute-force attacks against the
equipment login. Note that the system supports only one concurrent session and implements a delay of more than a second
between failed login attempts making it difficult to automate the
attacks. |
| Improper Privilege Management vulnerability in IOSS WP MLM Unilevel allows Privilege Escalation.This issue affects WP MLM Unilevel: from n/a through 4.0. |
| ZKsync Era is a layer 2 rollup that uses zero-knowledge proofs to scale Ethereum. There is possible invalid stack access due to the addresses used to access the stack not properly being converted to cells. This issue has been patched in version 1.5.0. |
| The Timetable and Event Schedule by MotoPress WordPress plugin before 2.4.16 does not verify a user has access to a specific event when duplicating, leading to arbitrary event disclosure when to users with a role as low as Contributor. |
| The password of a web user in "Sante PACS Server.exe" is zero-padded to 0x2000 bytes, SHA1-hashed, base64-encoded, and stored in the USER table in the SQLite database HTTP.db. However, the number of hash bytes encoded and stored is truncated if the hash contains a zero byte |
| With physical access to the device and enough time an attacker can desolder the flash memory, modify it and then reinstall it because of missing encryption. Thus, essential files, such as "/etc/passwd", as well as stored certificates, cryptographic keys, stored PINs and so on can be modified and read, in order to gain SSH root access on the Linux-based K7 model. On the Windows CE based K5 model, the password for the Access Manager can additionally be read in plain text from the stored SQLite database. |
| Ubiquiti U7-Pro 7.0.35 was discovered to contain a hardcoded password vulnerability in /etc/shadow, which allows attackers to log in as root. NOTE: this is disputed by the Supplier because the observation only established that a password is present in a firmware image; however, the device cannot be deployed without setting a new password during installation. |
| SignXML is an implementation of the W3C XML Signature standard in Python. When verifying signatures with X509 certificate validation turned off and HMAC shared secret set (`signxml.XMLVerifier.verify(require_x509=False, hmac_key=...`), versions of SignXML prior to 4.0.4 are vulnerable to a potential algorithm confusion attack. Unless the user explicitly limits the expected signature algorithms using the `signxml.XMLVerifier.verify(expect_config=...)` setting, an attacker may supply a signature unexpectedly signed with a key other than the provided HMAC key, using a different (asymmetric key) signature algorithm. Starting with SignXML 4.0.4, specifying `hmac_key` causes the set of accepted signature algorithms to be restricted to HMAC only, if not already restricted by the user. |
| The Bookit WordPress plugin before 2.5.1 has a publicly accessible REST endpoint that allows unauthenticated update of the plugins Stripe payment options. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix warning when putting transaction with qgroups enabled after abort
If we have a transaction abort with qgroups enabled we get a warning
triggered when doing the final put on the transaction, like this:
[552.6789] ------------[ cut here ]------------
[552.6815] WARNING: CPU: 4 PID: 81745 at fs/btrfs/transaction.c:144 btrfs_put_transaction+0x123/0x130 [btrfs]
[552.6817] Modules linked in: btrfs blake2b_generic xor (...)
[552.6819] CPU: 4 PID: 81745 Comm: btrfs-transacti Tainted: G W 6.4.0-rc6-btrfs-next-134+ #1
[552.6819] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014
[552.6819] RIP: 0010:btrfs_put_transaction+0x123/0x130 [btrfs]
[552.6821] Code: bd a0 01 00 (...)
[552.6821] RSP: 0018:ffffa168c0527e28 EFLAGS: 00010286
[552.6821] RAX: ffff936042caed00 RBX: ffff93604a3eb448 RCX: 0000000000000000
[552.6821] RDX: ffff93606421b028 RSI: ffffffff92ff0878 RDI: ffff93606421b010
[552.6821] RBP: ffff93606421b000 R08: 0000000000000000 R09: ffffa168c0d07c20
[552.6821] R10: 0000000000000000 R11: ffff93608dc52950 R12: ffffa168c0527e70
[552.6821] R13: ffff93606421b000 R14: ffff93604a3eb420 R15: ffff93606421b028
[552.6821] FS: 0000000000000000(0000) GS:ffff93675fb00000(0000) knlGS:0000000000000000
[552.6821] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[552.6821] CR2: 0000558ad262b000 CR3: 000000014feda005 CR4: 0000000000370ee0
[552.6822] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[552.6822] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[552.6822] Call Trace:
[552.6822] <TASK>
[552.6822] ? __warn+0x80/0x130
[552.6822] ? btrfs_put_transaction+0x123/0x130 [btrfs]
[552.6824] ? report_bug+0x1f4/0x200
[552.6824] ? handle_bug+0x42/0x70
[552.6824] ? exc_invalid_op+0x14/0x70
[552.6824] ? asm_exc_invalid_op+0x16/0x20
[552.6824] ? btrfs_put_transaction+0x123/0x130 [btrfs]
[552.6826] btrfs_cleanup_transaction+0xe7/0x5e0 [btrfs]
[552.6828] ? _raw_spin_unlock_irqrestore+0x23/0x40
[552.6828] ? try_to_wake_up+0x94/0x5e0
[552.6828] ? __pfx_process_timeout+0x10/0x10
[552.6828] transaction_kthread+0x103/0x1d0 [btrfs]
[552.6830] ? __pfx_transaction_kthread+0x10/0x10 [btrfs]
[552.6832] kthread+0xee/0x120
[552.6832] ? __pfx_kthread+0x10/0x10
[552.6832] ret_from_fork+0x29/0x50
[552.6832] </TASK>
[552.6832] ---[ end trace 0000000000000000 ]---
This corresponds to this line of code:
void btrfs_put_transaction(struct btrfs_transaction *transaction)
{
(...)
WARN_ON(!RB_EMPTY_ROOT(
&transaction->delayed_refs.dirty_extent_root));
(...)
}
The warning happens because btrfs_qgroup_destroy_extent_records(), called
in the transaction abort path, we free all entries from the rbtree
"dirty_extent_root" with rbtree_postorder_for_each_entry_safe(), but we
don't actually empty the rbtree - it's still pointing to nodes that were
freed.
So set the rbtree's root node to NULL to avoid this warning (assign
RB_ROOT). |
| Para is a multitenant backend server/framework for object persistence and retrieval. A vulnerability that exists in versions prior to 1.50.8 exposes both access and secret keys in logs without redaction. These credentials are later reused in variable assignments for persistence but do not require logging for debugging or system health purposes. Version 1.50.8 fixes the issue. |
| FLIR Thermal Camera FC-S/PT firmware version 8.0.0.64 contains an authenticated OS command injection vulnerability that allows attackers to execute shell commands with root privileges. Authenticated attackers can inject arbitrary shell commands through unvalidated input parameters to gain complete control of the thermal camera system. |
| FLIR Thermal Camera F/FC/PT/D firmware version 8.0.0.64 contains hard-coded SSH credentials that cannot be changed through normal camera operations. Attackers can leverage these persistent, unmodifiable credentials to gain unauthorized remote access to the thermal camera system. |
| zot is ancontainer image/artifact registry based on the Open Container Initiative Distribution Specification. Prior to version 2.1.3 (corresponding to pseudoversion 1.4.4-0.20250522160828-8a99a3ed231f), when using Keycloak as an oidc provider, the clientsecret gets printed into the container stdout logs for an example at container startup. Version 2.1.3 (corresponding to pseudoversion 1.4.4-0.20250522160828-8a99a3ed231f) fixes the issue. |
| BigBlueButton is an open-source virtual classroom designed to help teachers teach and learners learn. An attacker with a valid join link to a meeting can trick BigBlueButton into generating a signed join link with additional parameters. One of those parameters may be "role=moderator", allowing an attacker to join a meeting as moderator using a join link that was originally created for viewer access. This vulnerability has been patched in version(s) 2.6.18, 2.7.8 and 3.0.0-alpha.7. |