| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| IBM WebSphere Application Server Liberty 22.0.0.13 through 23.0.0.7 is vulnerable to a denial of service, caused by sending a specially-crafted request. A remote attacker could exploit this vulnerability to cause the server to consume memory resources. IBM X-Force ID: 262567. |
| IBM Robotic Process Automation 21.0.0 through 21.0.7.8 could disclose sensitive information from access to RPA scripts, workflows and related data. IBM X-Force ID: 261606. |
| import-in-the-middle is a module loading interceptor specifically for ESM modules. The import-in-the-middle loader works by generating a wrapper module on the fly. The wrapper uses the module specifier to load the original module and add some wrapping code. Prior to version 1.4.2, it allows for remote code execution in cases where an application passes user-supplied input directly to the `import()` function. This vulnerability has been patched in import-in-the-middle version 1.4.2.
Some workarounds are available. Do not pass any user-supplied input to `import()`. Instead, verify it against a set of allowed values. If using import-in-the-middle, directly or indirectly, and support for EcmaScript Modules is not needed, ensure that no options are set, either via command-line or the `NODE_OPTIONS` environment variable, that would enable loader hooks. |
| Hydra is the layer-two scalability solution for Cardano. Users of the Hydra head protocol send the UTxOs they wish to commit into the Hydra head first to the `commit` validator, where they remain until they are either collected into the `head` validator or the protocol initialisation is aborted and the value in the committed UTxOs is returned to the users who committed them. Prior to version 0.12.0, the `commit` validator contains a flawed check when the `ViaAbort` redeemer is used, which allows any user to spend any UTxO which is at the validator arbitrarily, meaning an attacker can steal the funds that users are trying to commit into the head validator. The intended behavior is that the funds must be returned to the user which committed the funds and can only be performed by a participant of the head. The `initial` validator also is similarly affected as the same flawed check is performed for the `ViaAbort` redeemer. Due to this issue, an attacker can steal any funds that user's try to commit into a Hydra head. Also, an attacker can prevent any Hydra head from being successfully opened. It does not allow an attacker to take funds which have been successfully collected into and currently reside in the `head` validator. Version 0.12.0 contains a fix for this issue. |
| matrix-appservice-irc is a Node.js IRC bridge for Matrix. Prior to version 1.0.1, it was possible to craft an event such that it would leak part of a targeted message event from another bridged room. This required knowing an event ID to target. Version 1.0.1n fixes this issue. As a workaround, set the `matrixHandler.eventCacheSize` config value to `0`. This workaround may impact performance. |
| matrix-appservice-irc is a Node.js IRC bridge for Matrix. Prior to version 1.0.1, it is possible to craft a command with newlines which would not be properly parsed. This would mean you could pass a string of commands as a channel name, which would then be run by the IRC bridge bot. Versions 1.0.1 and above are patched. There are no robust workarounds to the bug. One may disable dynamic channels in the config to disable the most common execution method but others may exist. |
| Discourse is an open source discussion platform. Prior to version 3.0.6 of the `stable` branch and version 3.1.0.beta7 of the `beta` and `tests-passed` branches, information about restricted-visibility topic tags could be obtained by unauthorized users. The issue is patched in version 3.0.6 of the `stable` branch and version 3.1.0.beta7 of the `beta` and `tests-passed` branches. |
| Improper input validation for some some Intel(R) PROSet/Wireless WiFi software for Windows before version 23.20 may allow an unauthenticated user to potentially enable denial of service via adjacent access. |
| Directus is a real-time API and App dashboard for managing SQL database content. Starting in version 10.3.0 and prior to version 10.5.0, the permission filters (i.e. `user_created IS $CURRENT_USER`) are not properly checked when using GraphQL subscription resulting in unauthorized users getting event on their subscription which they should not be receiving according to the permissions. This can be any collection but out-of-the box the `directus_users` collection is configured with such a permissions filter allowing you to get updates for other users when changes happen. Version 10.5.0 contains a patch. As a workaround, disable GraphQL subscriptions. |
| TDengine is an open source, time-series database optimized for Internet of Things devices. Prior to version 3.0.7.1, TDengine DataBase crashes on UDF nested query. This issue affects TDengine Databases which let users connect and run arbitrary queries. Version 3.0.7.1 has a patch for this issue. |
| TYPO3 is an open source PHP based web content management system. Starting in version 9.4.0 and prior to versions 9.5.42 ELTS, 10.4.39 ELTS, 11.5.30, and 12.4.4, in multi-site scenarios, enumerating the HTTP query parameters `id` and `L` allowed out-of-scope access to rendered content in the website frontend. For instance, this allowed visitors to access content of an internal site by adding handcrafted query parameters to the URL of a site that was publicly available. TYPO3 versions 9.5.42 ELTS, 10.4.39 ELTS, 11.5.30, 12.4.4 fix the problem. |
| Crossplane is a framework for building cloud native control planes without needing to write code. In versions prior to 1.11.5, 1.12.3, and 1.13.0, Crossplane's image backend does not validate the byte contents of Crossplane packages. As such, Crossplane does not detect if an attacker has tampered with a Package. The problem has been fixed in 1.11.5, 1.12.3 and 1.13.0. As a workaround, only use images from trusted sources and keep Package editing/creating privileges to administrators only. |
| MeterSphere is an open-source continuous testing platform. Prior to version 2.10.4 LTS, some interfaces of the Cloud version of MeterSphere do not have configuration permissions, and are sensitively leaked by attackers. Version 2.10.4 LTS contains a patch for this issue. |
| Improper input validation for some Intel(R) PROSet/Wireless WiFi software before version 23.20 may allow an unauthenticated user to potentially enable denial of service via adjacent access. |
| An issue was discovered in Ivanti Endpoint Manager before 2022 SU4. A file disclosure vulnerability exists in the GetFileContents SOAP action exposed via /landesk/managementsuite/core/core.secure/OsdScript.asmx. The application does not sufficiently restrict user-supplied paths, allowing for an authenticated attacker to read arbitrary files from a remote system, including the private key used to authenticate to agents for remote access. |
| An issue was discovered in a third-party component related to vendor.gsm.serial, shipped on devices from multiple device manufacturers. Various software builds for the BLU View 2, Boost Mobile Celero 5G, Sharp Rouvo V, Motorola Moto G Pure, Motorola Moto G Power, T-Mobile Revvl 6 Pro 5G, and T-Mobile Revvl V+ 5G devices leak the device serial number to a system property that can be accessed by any local app on the device without any permissions or special privileges. Google restricted third-party apps from directly obtaining non-resettable device identifiers in Android 10 and higher, but in these instances they are leaked by a high-privilege process and can be obtained indirectly. The software build fingerprints for each confirmed vulnerable device are as follows: BLU View 2 (BLU/B131DL/B130DL:11/RP1A.200720.011/1672046950:user/release-keys); Boost Mobile Celero 5G (Celero5G/Jupiter/Jupiter:11/RP1A.200720.011/SW_S98119AA1_V067:user/release-keys); Sharp Rouvo V (SHARP/VZW_STTM21VAPP/STTM21VAPP:12/SP1A.210812.016/1KN0_0_530:user/release-keys); Motorola Moto G Pure (motorola/ellis_trac/ellis:11/RRHS31.Q3-46-110-2/74844:user/release-keys, motorola/ellis_trac/ellis:11/RRHS31.Q3-46-110-7/5cde8:user/release-keys, motorola/ellis_trac/ellis:11/RRHS31.Q3-46-110-10/d67faa:user/release-keys, motorola/ellis_trac/ellis:11/RRHS31.Q3-46-110-13/b4a29:user/release-keys, motorola/ellis_trac/ellis:12/S3RH32.20-42-10/1c2540:user/release-keys, motorola/ellis_trac/ellis:12/S3RHS32.20-42-13-2-1/6368dd:user/release-keys, motorola/ellis_a/ellis:11/RRH31.Q3-46-50-2/20fec:user/release-keys, motorola/ellis_vzw/ellis:11/RRH31.Q3-46-138/103bd:user/release-keys, motorola/ellis_vzw/ellis:11/RRHS31.Q3-46-138-2/e5502:user/release-keys, and motorola/ellis_vzw/ellis:12/S3RHS32.20-42-10-14-2/5e0b0:user/release-keys); Motorola Moto G Power (motorola/tonga_g/tonga:11/RRQ31.Q3-68-16-2/e5877:user/release-keys and motorola/tonga_g/tonga:12/S3RQS32.20-42-10-6/f876d3:user/release-keys); T-Mobile Revvl 6 Pro 5G (T-Mobile/Augusta/Augusta:12/SP1A.210812.016/SW_S98121AA1_V070:user/release-keys); and T-Mobile Revvl V+ 5G (T-Mobile/Sprout/Sprout:11/RP1A.200720.011/SW_S98115AA1_V077:user/release-keys). This malicious app reads from the "vendor.gsm.serial" system property to indirectly obtain the device serial number. |
| A certain software build for the Orbic Maui device (Orbic/RC545L/RC545L:10/ORB545L_V1.4.2_BVZPP/230106:user/release-keys) leaks the IMEI and the ICCID to system properties that can be accessed by any local app on the device without any permissions or special privileges. Google restricted third-party apps from directly obtaining non-resettable device identifiers in Android 10 and higher, but in this instance they are leaked by a high-privilege process and can be obtained indirectly. This malicious app reads from the "persist.sys.verizon_test_plan_imei" system property to indirectly obtain the IMEI and reads the "persist.sys.verizon_test_plan_iccid" system property to obtain the ICCID. |
| Various software builds for the following TCL 30Z and TCL A3X devices leak the ICCID to a system property that can be accessed by any local app on the device without any permissions or special privileges. Google restricted third-party apps from directly obtaining non-resettable device identifiers in Android 10 and higher, but in these instances they are leaked by a high-privilege process and can be obtained indirectly. The software build fingerprints for each confirmed vulnerable device are as follows: TCL 30Z (TCL/4188R/Jetta_ATT:12/SP1A.210812.016/LV8E:user/release-keys, TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU5P:user/release-keys, TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU61:user/release-keys, TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU66:user/release-keys, TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU68:user/release-keys, TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU6P:user/release-keys, and TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU6X:user/release-keys) and TCL A3X (TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vAAZ:user/release-keys, TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vAB3:user/release-keys, TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vAB7:user/release-keys, TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vABA:user/release-keys, TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vABM:user/release-keys, TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vABP:user/release-keys, and TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vABS:user/release-keys). This malicious app reads from the "persist.sys.tctPowerIccid" system property to indirectly obtain the ICCID. |
| Certain software builds for the Nokia C200 and Nokia C100 Android devices contain a vulnerable, pre-installed app with a package name of com.tracfone.tfstatus (versionCode='31', versionName='12') that allows local third-party apps to execute arbitrary AT commands in its context (radio user) via AT command injection due to inadequate access control and inadequate input filtering. No permissions or special privileges are necessary to exploit the vulnerability in the com.tracfone.tfstatus app. No user interaction is required beyond installing and running a third-party app. The software build fingerprints for each confirmed vulnerable device are as follows: Nokia C200 (Nokia/Drake_02US/DRK:12/SP1A.210812.016/02US_1_080:user/release-keys and Nokia/Drake_02US/DRK:12/SP1A.210812.016/02US_1_040:user/release-keys) and Nokia C100 (Nokia/DrakeLite_02US/DKT:12/SP1A.210812.016/02US_1_270:user/release-keys, Nokia/DrakeLite_02US/DKT:12/SP1A.210812.016/02US_1_190:user/release-keys, Nokia/DrakeLite_02US/DKT:12/SP1A.210812.016/02US_1_130:user/release-keys, Nokia/DrakeLite_02US/DKT:12/SP1A.210812.016/02US_1_110:user/release-keys, Nokia/DrakeLite_02US/DKT:12/SP1A.210812.016/02US_1_080:user/release-keys, and Nokia/DrakeLite_02US/DKT:12/SP1A.210812.016/02US_1_050:user/release-keys). This malicious app sends a broadcast Intent to the receiver component named com.tracfone.tfstatus/.TFStatus. This broadcast receiver extracts a string from the Intent and uses it as an extra when it starts the com.tracfone.tfstatus/.TFStatusActivity activity component which uses the externally controlled string as an input to execute an AT command. There are two different injection techniques to successfully inject arbitrary AT commands to execute. |
| Adobe Acrobat Reader versions 23.003.20244 (and earlier) and 20.005.30467 (and earlier) are affected by an Information Disclosure vulnerability. An unauthenticated attacker could leverage this vulnerability to obtain NTLMv2 credentials. Exploitation of this issue requires user interaction in that a victim must open a maliciously crafted Microsoft Office file, or visit an attacker controlled web page. |
