| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| FiberHome AN5506-04-FA firmware versions up to and including RP2631 and HG6245D prior to RP2602 contain a stack-based buffer overflow, as the HTTP service ('webs') fails to enforce maximum lengths for Cookie header values. When a cookie longer than 511 bytes is processed, a stack buffer is overrun, leading to a crash or potential control of execution flow. |
| : Modification of Assumed-Immutable Data (MAID) vulnerability in ABB ANC, ABB ANC-L, ABB ANC-mini.This issue affects ANC: through 1.1.4; ANC-L: through 1.1.4; ANC-mini: through 1.1.4. |
| A vulnerability in a debug function for Cisco RCM for Cisco StarOS Software could allow an unauthenticated, remote attacker to perform debug actions that could result in the disclosure of confidential information that should be restricted.
This vulnerability exists because of a debug service that incorrectly listens to and accepts incoming connections. An attacker could exploit this vulnerability by connecting to the debug port and executing debug commands. A successful exploit could allow the attacker to view sensitive debugging information.Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. |
| A vulnerability in the implementation of the CLI on a device that is running ConfD could allow an authenticated, local attacker to perform a command injection attack.
The vulnerability is due to insufficient validation of a process argument on an affected device. An attacker could exploit this vulnerability by injecting commands during the execution of this process. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with the privilege level of ConfD, which is commonly root. |
| A vulnerability in the Cisco Discovery Protocol functionality of Cisco ATA 190 Series Adaptive Telephone Adapter firmware could allow an unauthenticated, remote attacker to cause a DoS condition on an affected device.
This vulnerability is due to an out-of-bounds read when processing Cisco Discovery Protocol packets. An attacker could exploit this vulnerability by sending crafted Cisco Discovery Protocol packets to an affected device. A successful exploit could allow the attacker to cause a service restart.Cisco has released firmware updates that address this vulnerability. There are no workarounds that address this vulnerability. |
| A vulnerability in the TL1 function of Cisco Network Convergence System (NCS) 4000 Series could allow an authenticated, local attacker to cause a memory leak in the TL1 process.
This vulnerability is due to TL1 not freeing memory under some conditions. An attacker could exploit this vulnerability by connecting to the device and issuing TL1 commands after being authenticated. A successful exploit could allow the attacker to cause the TL1 process to consume large amounts of memory. When the memory reaches a threshold, the Resource Monitor (Resmon) process will begin to restart or shutdown the top five consumers of memory, resulting in a denial of service (DoS).Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.This advisory is part of the September 2022 release of the Cisco IOS XR Software Security Advisory Bundled Publication. For a complete list of the advisories and links to them, see . |
| Voltronic Power ViewPower through 1.04-21353 and PowerShield Netguard before 1.04-23292 allows a remote attacker to configure the system via an unspecified web interface. An unauthenticated remote attacker can make changes to the system including: changing the web interface admin password, view/change system configuration, enumerate connected UPS devices and shut down connected UPS devices. This extends to being able to configure operating system commands that should run if the system detects a connected UPS shutting down. |
| A vulnerability has been identified in SIMATIC PCS neo V4.0 (All versions), SIMATIC STEP 7 V16 (All versions), SIMATIC STEP 7 V17 (All versions), SIMATIC STEP 7 V18 (All versions < V18 Update 2). Affected applications do not properly restrict the .NET BinaryFormatter when deserializing user-controllable input. This could allow an attacker to cause a type confusion and execute arbitrary code within the affected application.
This is the same issue that exists for .NET BinaryFormatter https://docs.microsoft.com/en-us/visualstudio/code-quality/ca2300. |
| pcap_ether_aton() is an auxiliary function in libpcap, it takes a string argument and returns a fixed-size allocated buffer. The string argument must be a well-formed MAC-48 address in one of the supported formats, but this requirement has been poorly documented. If an application calls the function with an argument that deviates from the expected format, the function can read data beyond the end of the provided string and write data beyond the end of the allocated buffer. |
| Incorrect default permissions for some Intel(R) Battery Life Diagnostic Tool within Ring 3: User Applications may allow an escalation of privilege. Unprivileged software adversary with an authenticated user combined with a high complexity attack may enable escalation of privilege. This result may potentially occur via local access when attack requirements are present without special internal knowledge and requires active user interaction. The potential vulnerability may impact the confidentiality (high), integrity (high) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| A potential security vulnerability has been identified in HP Sure Start’s protection of the Intel Flash Descriptor in certain HP PC products, which might allow security bypass, arbitrary code execution, loss of integrity or confidentiality, or denial of service. HP is releasing BIOS updates to mitigate the potential vulnerability. |
| Shrubbery tac_plus 2.x, 3.x. and 4.x through F4.0.4.28 allows unauthenticated Remote Command Execution. The product allows users to configure authorization checks as shell commands through the tac_plus.cfg configuration file. These are executed when a client sends an authorization request with a username that has pre-authorization directives configured. However, it is possible to inject additional commands into these checks because strings from TACACS+ packets are used as command-line arguments. If the installation lacks a a pre-shared secret (there is no pre-shared secret by default), then the injection can be triggered without authentication. (The attacker needs to know a username configured to use a pre-authorization command.) NOTE: this is related to CVE-2023-45239 but the issue is in the original Shrubbery product, not Meta's fork. |
| The MainWP Child – Securely Connects to the MainWP Dashboard to Manage Multiple Sites plugin for WordPress is vulnerable to privilege escalation due to a missing authorization checks on the register_site function in all versions up to, and including, 5.2 when a site is left in an unconfigured state. This makes it possible for unauthenticated attackers to log in as an administrator on instances where MainWP Child is not yet connected to the MainWP Dashboard. IMPORTANT: this only affects sites who have MainWP Child installed and have not yet connected to the MainWP Dashboard, and do not have the unique security ID feature enabled. Sites already connected to the MainWP Dashboard plugin and do not have the unique security ID feature enabled, are NOT affected and not required to upgrade. Please note versions up to 5.3.3 contained a patch, though a bypass was discovered and not addressed until version 5.3.4. |
| Permissive Cross-domain Policy with Untrusted Domains vulnerability in local API server of DestinyECM solution(versions described below) which is developed and maintained by Cyberdigm may allow Cross-Site Request Forgery (CSRF) attack, which probabilistically enables JSON Hijacking (aka JavaScript Hijacking) via forgery web page.* Due to product customization, version information may differ from the following version description. For further inquiries, please contact the vendor. |
| The eHRMS from 104 Corporation has a Reflected Cross-site Scripting vulnerability, allowing unauthenticated remote attackers to execute arbitrary JavaScript codes in user's browser through phishing attacks. |
| A vulnerability was found in Kong Insomnia up to 10.3.0 and classified as critical. This issue affects some unknown processing in the library profapi.dll. The manipulation leads to untrusted search path. An attack has to be approached locally. The complexity of an attack is rather high. The exploitation is known to be difficult. The real existence of this vulnerability is still doubted at the moment. The vendor is not able to reproduce the issue. |
| CWE-276: Incorrect Default Permissions vulnerability exists that could cause privilege escalation through the reverse shell when one or more executable service binaries are modified in the installation folder by a local user with normal privilege upon service restart. |
| The Ultimate Post Kit Addons for Elementor WordPress plugin before 4.0.16 exposes multiple AJAX “load more” endpoints such as upk_alex_grid_loadmore_posts without ensuring that posts to be displayed are published authentication. This allows an unauthenticated attacker to query arbitrary posts and retrieve rendered HTML content of private and unpublished ones. |
| Hugo is a static site generator. Starting in version 0.123.0 and prior to version 0.139.4, some HTML attributes in Markdown in the internal templates listed below not escaped in internal render hooks. Those whoa re impacted are Hugo users who do not trust their Markdown content files and are using one or more of these templates: `_default/_markup/render-link.html` from `v0.123.0`; `_default/_markup/render-image.html` from `v0.123.0`; `_default/_markup/render-table.html` from `v0.134.0`; and/or `shortcodes/youtube.html` from `v0.125.0`. This issue is patched in v0.139.4. As a workaround, one may replace an affected component with user defined templates or disable the internal templates. |
| Discourse-reactions is a plugin that allows user to add their reactions to the post. When whispers are enabled on a site via `whispers_allowed_groups` and reactions are made on whispers on public topics, the contents of the whisper and the reaction data are shown on the `/u/:username/activity/reactions` endpoint.
|
