| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Out-of-bounds read for some TDX before version tdx module 1.5.24 within Ring 0: Hypervisor may allow an information disclosure. Authorized adversary with a privileged user combined with a low complexity attack may enable data exposure. This result may potentially occur via local access when attack requirements are present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (high), integrity (none) and availability (none) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| The T-Head XuanTie C910 CPU in the TH1520 SoC and the T-Head XuanTie C920 CPU in the SOPHON SG2042 have instructions that allow unprivileged attackers to write to arbitrary physical memory locations, aka GhostWrite. |
| NTFS-3G before 75dcdc2 has a use-after-free in ntfs_uppercase_mbs in libntfs-3g/unistr.c. NOTE: discussion suggests that exploitation would be challenging. |
| Improper input validation in the SMM communications buffer could allow a privileged attacker to perform an out of bounds read or write to SMRAM potentially resulting in loss of confidentiality or integrity. |
| A vulnerability has been identified in SIMATIC RTLS Locating Manager (6GT2780-0DA00) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-0DA10) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-0DA20) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-0DA30) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-1EA10) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-1EA20) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-1EA30) (All versions < V3.0.1.1). Affected components do not properly authenticate heartbeat messages. This could allow an unauthenticated remote attacker to affected the availability of secondary RTLS systems configured using a TeeRevProxy service and potentially cause loss of data generated during the time the attack is ongoing. |
| A vulnerability has been identified in SIMATIC RTLS Locating Manager (6GT2780-0DA00) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-0DA10) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-0DA20) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-0DA30) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-1EA10) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-1EA20) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-1EA30) (All versions < V3.0.1.1). The affected application does not properly limit the size of specific logs. This could allow an unauthenticated remote attacker to exhaust system resources by creating a great number of log entries which could potentially lead to a denial of service condition. A successful exploitation requires the attacker to have access to specific SIMATIC RTLS Locating Manager Clients in the deployment. |
| A vulnerability has been identified in SIMATIC RTLS Locating Manager (6GT2780-0DA00) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-0DA10) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-0DA20) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-0DA30) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-1EA10) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-1EA20) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-1EA30) (All versions < V3.0.1.1). Affected SIMATIC RTLS Locating Manager Report Clients do not properly protect credentials that are used to authenticate to the server. This could allow an authenticated local attacker to extract the credentials and use them to escalate their access rights from the Manager to the Systemadministrator role. |
| A vulnerability has been identified in SIMATIC RTLS Locating Manager (6GT2780-0DA00) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-0DA10) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-0DA20) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-0DA30) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-1EA10) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-1EA20) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-1EA30) (All versions < V3.0.1.1). Affected SIMATIC RTLS Locating Manager Track Viewer Client do not properly protect credentials that are used to authenticate to the server. This could allow an authenticated local attacker to extract the credentials and use them to escalate their access rights from the Manager to the Systemadministrator role. |
| A vulnerability has been identified in SIMATIC RTLS Locating Manager (6GT2780-0DA00) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-0DA10) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-0DA20) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-0DA30) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-1EA10) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-1EA20) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-1EA30) (All versions < V3.0.1.1). Affected applications do not properly release memory that is allocated when handling specifically crafted incoming packets. This could allow an unauthenticated remote attacker to cause a denial of service condition by crashing the service when it runs out of memory. The service is restarted automatically after a short time. |
| A vulnerability has been identified in SIMATIC RTLS Locating Manager (6GT2780-0DA00) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-0DA10) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-0DA20) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-0DA30) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-1EA10) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-1EA20) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-1EA30) (All versions < V3.0.1.1). The affected application assigns incorrect permissions to a user management component. This could allow a privileged attacker to escalate their privileges from the Administrators group to the Systemadministrator group. |
| In vulnerable versions of Calico (v3.27.2 and below), Calico Enterprise (v3.19.0-1, v3.18.1, v3.17.3 and below), and Calico Cloud (v19.2.0 and below), an attacker who has local access to the Kubernetes node, can escalate their privileges by exploiting a vulnerability in the Calico CNI install binary. The issue arises from an incorrect SUID (Set User ID) bit configuration in the binary, combined with the ability to control the input binary, allowing an attacker to execute an arbitrary binary with elevated privileges.
|
| A vulnerability has been identified in SIMATIC RTLS Locating Manager (6GT2780-0DA00) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-0DA10) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-0DA20) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-0DA30) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-1EA10) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-1EA20) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-1EA30) (All versions < V3.0.1.1). Affected application contains a hidden configuration item to enable debug functionality. This could allow an authenticated local attacker to gain insight into the internal configuration of the deployment. |
| A vulnerability classified as critical was found in CP Plus Wi-Fi Camera up to 20240401. Affected by this vulnerability is an unknown functionality of the component User Management. The manipulation leads to improper authorization. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-259615. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| The matrix-sdk-crypto crate, part of the Matrix Rust SDK project, is an implementation of a Matrix end-to-end encryption state machine in Rust. In Matrix, the server-side `key backup` stores encrypted copies of Matrix message keys. This facilitates key sharing between a user's devices and provides a redundant copy in case all devices are lost. The key backup uses asymmetric
cryptography, with each server-side key backup assigned a unique public-private key pair. Due to a logic bug introduced in commit 71136e44c03c79f80d6d1a2446673bc4d53a2067, matrix-sdk-crypto version 0.7.0 will sometimes log the private part of the backup key pair to Rust debug logs (using the `tracing` crate). This issue has been resolved in matrix-sdk-crypto version 0.7.1. No known workarounds are available. |
| go-spacemesh is a Go implementation of the Spacemesh protocol full node. Nodes can publish activations transactions (ATXs) which reference the incorrect previous ATX of the Smesher that created the ATX. ATXs are expected to form a single chain from the newest to the first ATX ever published by an identity. Allowing Smeshers to reference an earlier (but not the latest) ATX as previous breaks this protocol rule and can serve as an attack vector where Nodes are rewarded for holding their PoST data for less than one epoch but still being eligible for rewards. This vulnerability is fixed in go-spacemesh 1.5.2-hotfix1 and Spacemesh API 1.37.1. |
| PaperCut Print Deploy is an optional component that integrates with PaperCut NG/MF which simplifies printer deployment and management. When the component is deployed to an environment, the customer has an option to configure the system to use a self-signed certificate. If the customer does not fully configure the system to leverage the trust database on the clients, it opens up the communication between clients and the server to man-in-the-middle attacks.
It was discovered that certain parts of the documentation related to the configuration of SSL in Print Deploy were lacking, which could potentially contribute to a misconfiguration of the Print Deploy client installation. PaperCut strongly recommends to use valid certificates to secure installations and to follow the updated documentation to ensure the correct SSL configuration. Those who use private CAs and/or self-signed certificates should make sure to copy their Certification Authority certificate, or their self signed certificate if using only one, to the trust store of their operating system and to the Java key store |
| CreateWiki is Miraheze's MediaWiki extension for requesting & creating wikis. It is possible for users to be considered as the requester of a specific wiki request if their local user ID on any wiki in a wiki farm matches the local ID of the requester at the wiki where the wiki request was made. This allows them to go to that request entry's on Special:RequestWikiQueue on the wiki where their local user ID matches and take any actions that the wiki requester is allowed to take from there.
Commit 02e0f298f8d35155c39aa74193cb7b867432c5b8 fixes the issue. Important note about the fix: This vulnerability has been fixed by disabling access to the REST API and special pages outside of the wiki configured as the "global wiki" in `$wgCreateWikiGlobalWiki` in a user's MediaWiki settings.
As a workaround, it is possible to disable the special pages outside of one's own global wiki by doing something similar to `miraheze/mw-config` commit e5664995fbb8644f9a80b450b4326194f20f9ddc that is adapted to one's own setup. As for the REST API, before the fix, there wasn't any REST endpoint that allowed one to make writes. Regardless, it is possible to also disable it outside of the global wiki by using `$wgCreateWikiDisableRESTAPI` and `$wgConf` in the configuration for one's own wiki farm.. |
| era-compiler-solidity is the ZKsync compiler for Solidity. The problem occurred during instruction selection in the `DAGCombine` phase while visiting the XOR operation. The issue arises when attempting to fold the expression `!(x cc y)` into `(x !cc y)`. To perform this transformation, the second operand of XOR should be a constant representing the true value. However, it was incorrectly assumed that -1 represents the true value, when in fact, 1 is the correct representation, so this transformation for this case should be skipped. This vulnerability is fixed in 1.4.1. |
| The Header Footer Code Manager Pro plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via the message parameter in all versions up to, and including, 1.0.16 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link. |
| The Mesmerize Companion plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's 'mesmerize_contact_form' shortcode in all versions up to, and including, 1.6.148 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
