| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The Honeywell Experion PKS
and OneWireless WDM
contains a Deployment of Wrong Handler
vulnerability
in the component Control Data Access (CDA). An attacker could potentially exploit this vulnerability, leading to
Input Data Manipulation,
which could result in incorrect handling of packets leading to remote code execution.
Honeywell recommends updating to the most recent version of Honeywell Experion PKS:520.2 TCU9 HF1 and 530.1 TCU3 HF1 and OneWireless: 322.5 and 331.1.
The affected Experion PKS products are C300 PCNT02, C300 PCNT05, FIM4, FIM8, UOC, CN100, HCA, C300PM, and C200E. The Experion PKS versions affected are from 520.1 through 520.2 TCU9 and from 530 through 530 TCU3. The OneWireless WDM affected versions are 322.1 through 322.4 and 330.1 through 330.3. |
| Weak Password Requirements vulnerability in Mitsubishi Electric Corporation photovoltaic system monitor “EcoGuideTAB” PV-DR004J all versions and PV-DR004JA all versions allows an attacker within the Wi-Fi communication range between the units of the product (measurement unit and display unit) to derive the password from the SSID. In addition, if the product is configured to enable the individual air conditioner control function, an attacker who has access to the Wi-Fi communication between the units by exploiting this vulnerability may be able to execute ECHONET Lite commands to perform operations such as turning the air conditioner on or off and changing the set temperature. The individual air conditioner control function is available only in display unit version 02.00.01 or later and measurement unit version 02.03.01 or later. The affected products discontinued in 2015, support ended in 2020. |
| A vulnerability was identified in NeuVector, where the enforcer used environment variables CLUSTER_RPC_PORT and CLUSTER_LAN_PORT to generate a command to be executed via popen, without first sanitising their values.
The entry process of the enforcer container is the monitor
process. When the enforcer container stops, the monitor process checks
whether the consul subprocess has exited. To perform this check, the
monitor process uses the popen function to execute a shell command that determines whether the ports used by the consul subprocess are still active.
The values of environment variables CLUSTER_RPC_PORT and CLUSTER_LAN_PORT
are used directly to compose shell commands via popen without
validation or sanitization. This behavior could allow a malicious user
to inject malicious commands through these variables within the enforcer
container. |
| A vulnerability was identified in Docker Desktop that allows local running Linux containers to access the Docker Engine API via the configured Docker subnet, at 192.168.65.7:2375 by default. This vulnerability occurs with or without Enhanced Container Isolation (ECI) enabled, and with or without the "Expose daemon on tcp://localhost:2375 without TLS" option enabled.
This can lead to execution of a wide range of privileged commands to the engine API, including controlling other containers, creating new ones, managing images etc. In some circumstances (e.g. Docker Desktop for Windows with WSL backend) it also allows mounting the host drive with the same privileges as the user running Docker Desktop. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: directly free partially initialized fs_info in btrfs_check_leaked_roots()
If fs_info->super_copy or fs_info->super_for_commit allocated failed in
btrfs_get_tree_subvol(), then no need to call btrfs_free_fs_info().
Otherwise btrfs_check_leaked_roots() would access NULL pointer because
fs_info->allocated_roots had not been initialised.
syzkaller reported the following information:
------------[ cut here ]------------
BUG: unable to handle page fault for address: fffffffffffffbb0
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 64c9067 P4D 64c9067 PUD 64cb067 PMD 0
Oops: Oops: 0000 [#1] SMP KASAN PTI
CPU: 0 UID: 0 PID: 1402 Comm: syz.1.35 Not tainted 6.15.8 #4 PREEMPT(lazy)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), (...)
RIP: 0010:arch_atomic_read arch/x86/include/asm/atomic.h:23 [inline]
RIP: 0010:raw_atomic_read include/linux/atomic/atomic-arch-fallback.h:457 [inline]
RIP: 0010:atomic_read include/linux/atomic/atomic-instrumented.h:33 [inline]
RIP: 0010:refcount_read include/linux/refcount.h:170 [inline]
RIP: 0010:btrfs_check_leaked_roots+0x18f/0x2c0 fs/btrfs/disk-io.c:1230
[...]
Call Trace:
<TASK>
btrfs_free_fs_info+0x310/0x410 fs/btrfs/disk-io.c:1280
btrfs_get_tree_subvol+0x592/0x6b0 fs/btrfs/super.c:2029
btrfs_get_tree+0x63/0x80 fs/btrfs/super.c:2097
vfs_get_tree+0x98/0x320 fs/super.c:1759
do_new_mount+0x357/0x660 fs/namespace.c:3899
path_mount+0x716/0x19c0 fs/namespace.c:4226
do_mount fs/namespace.c:4239 [inline]
__do_sys_mount fs/namespace.c:4450 [inline]
__se_sys_mount fs/namespace.c:4427 [inline]
__x64_sys_mount+0x28c/0x310 fs/namespace.c:4427
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x92/0x180 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7f032eaffa8d
[...] |
| In the Linux kernel, the following vulnerability has been resolved:
fs/notify: call exportfs_encode_fid with s_umount
Calling intotify_show_fdinfo() on fd watching an overlayfs inode, while
the overlayfs is being unmounted, can lead to dereferencing NULL ptr.
This issue was found by syzkaller.
Race Condition Diagram:
Thread 1 Thread 2
-------- --------
generic_shutdown_super()
shrink_dcache_for_umount
sb->s_root = NULL
|
| vfs_read()
| inotify_fdinfo()
| * inode get from mark *
| show_mark_fhandle(m, inode)
| exportfs_encode_fid(inode, ..)
| ovl_encode_fh(inode, ..)
| ovl_check_encode_origin(inode)
| * deref i_sb->s_root *
|
|
v
fsnotify_sb_delete(sb)
Which then leads to:
[ 32.133461] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN NOPTI
[ 32.134438] KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037]
[ 32.135032] CPU: 1 UID: 0 PID: 4468 Comm: systemd-coredum Not tainted 6.17.0-rc6 #22 PREEMPT(none)
<snip registers, unreliable trace>
[ 32.143353] Call Trace:
[ 32.143732] ovl_encode_fh+0xd5/0x170
[ 32.144031] exportfs_encode_inode_fh+0x12f/0x300
[ 32.144425] show_mark_fhandle+0xbe/0x1f0
[ 32.145805] inotify_fdinfo+0x226/0x2d0
[ 32.146442] inotify_show_fdinfo+0x1c5/0x350
[ 32.147168] seq_show+0x530/0x6f0
[ 32.147449] seq_read_iter+0x503/0x12a0
[ 32.148419] seq_read+0x31f/0x410
[ 32.150714] vfs_read+0x1f0/0x9e0
[ 32.152297] ksys_read+0x125/0x240
IOW ovl_check_encode_origin derefs inode->i_sb->s_root, after it was set
to NULL in the unmount path.
Fix it by protecting calling exportfs_encode_fid() from
show_mark_fhandle() with s_umount lock.
This form of fix was suggested by Amir in [1].
[1]: https://lore.kernel.org/all/CAOQ4uxhbDwhb+2Brs1UdkoF0a3NSdBAOQPNfEHjahrgoKJpLEw@mail.gmail.com/ |
| In the Linux kernel, the following vulnerability has been resolved:
net: phy: micrel: always set shared->phydev for LAN8814
Currently, during the LAN8814 PTP probe shared->phydev is only set if PTP
clock gets actually set, otherwise the function will return before setting
it.
This is an issue as shared->phydev is unconditionally being used when IRQ
is being handled, especially in lan8814_gpio_process_cap and since it was
not set it will cause a NULL pointer exception and crash the kernel.
So, simply always set shared->phydev to avoid the NULL pointer exception. |
| Strapi uses JSON Web Tokens (JWT) for authentication. After logout or account deactivation, the JWT is not invalidated, which allows an attacker who has stolen or intercepted the token to freely reuse it until its expiration date (which is set to 30 days by default, but can be changed).
The existence of /admin/renew-token endpoint allows anyone to renew near-expiration tokens indefinitely, further increasing the impact of this attack.
This issue has been fixed in version 5.24.1. |
| A low privileged local attacker can interact with the affected service although user-interaction should not be allowed. |
| JHipster before v.8.9.0 allows privilege escalation via a modified authorities parameter. Upon registering in the JHipster portal and logging in as a standard user, the authorities parameter in the response from the api/account endpoint contains the value ROLE_USER. By manipulating the authorities parameter and changing its value to ROLE_ADMIN, the privilege is successfully escalated to an Admin level. This allowed the access to all admin-related functionalities in the application. NOTE: this is disputed by the Supplier because there is no privilege escalation in the context of the JHipster backend (the report only demonstrates that, after using JHipster to generate an application, one can make a non-functional admin screen visible in the front end of that application). |
| React Router is a router for React. In versions on the 7.0 branch prior to version 7.5.2, it's possible to modify pre-rendered data by adding a header to the request. This allows to completely spoof its contents and modify all the values of the data object passed to the HTML. This issue has been patched in version 7.5.2. |
| Jointelli 5G CPE 21H01 firmware JY_21H01_A3_v1.36 devices allow (blind) OS command injection. Multiple endpoints are vulnerable, including /ubus/?flag=set_WPS_pin and /ubus/?flag=netAppStar1 and /ubus/?flag=set_wifi_cfgs. This allows an authenticated attacker to execute arbitrary OS commands with root privileges via crafted inputs to the SSID, WPS, Traceroute, and Ping fields. |
| An issue was discovered on FIRSTNUM JC21A-04 devices through 2.01ME/FN. They enable the SSH service by default with the credentials of root/admin. The GUI doesn't offer a way to disable the account. |
| Daikin Europe N.V
Security Gateway is vulnerable to an authorization bypass through
a user-controlled key vulnerability that could allow an attacker to
bypass authentication. An unauthorized attacker could access the system
without prior credentials. |
| Authentication Bypass Using an Alternate Path or Channel vulnerability in ABB ABB Ability Edgenius.This issue affects ABB Ability Edgenius: 3.2.0.0, 3.2.1.1. |
| A stored cross-site scripting (XSS) vulnerability in CodeIgniter4 v4.6.0 allows attackers to execute arbitrary web scripts or HTML via a crafted payload injected into the debugbar_time parameter. NOTE: this is disputed by the Supplier because attackers cannot influence the value of debugbar_time, and because debugbar-related data is automatically escaped by the CodeIgniter Parser class. |
| A malicious user with administrative privileges in the web portal would be able to manipulate the Diagnostics module to obtain remote code execution on the local device as a low privileged user. |
| CNCF K3s 1.32 before 1.32.4-rc1+k3s1 has a Kubernetes kubelet configuration change with the unintended consequence that, in some situations, ReadOnlyPort is set to 10255. For example, the default behavior of a K3s online installation might allow unauthenticated access to this port, exposing credentials. |
| Quantum StorNext Web GUI API before 7.2.4 allows potential Arbitrary Remote Code Execution (RCE) via upload of a file. This affects StorNext RYO before 7.2.4, StorNext Xcellis Workflow Director before 7.2.4, and ActiveScale Cold Storage. |
| The sr_feuser_register extension through 12.4.8 for TYPO3 allows Remote Code Execution. |
