| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In Ubiquiti Networks EdgeSwitch X v1.1.0 and prior, an authenticated user can execute arbitrary shell commands over the SSH interface bypassing the CLI interface, which allow them to escalate privileges to root. |
| In Ubiquiti Networks EdgeSwitch X v1.1.0 and prior, a privileged user can execute arbitrary shell commands over the SSH CLI interface. This allows to execute shell commands under the root user. |
| If an attacker can control the port, which in itself is a very sensitive value, they can inject arbitrary OS commands due to the usage of the exec function in a third-party module kill-port < 1.3.2. |
| A stack buffer overflow vulnerability was identified in HPE Intelligent Management Center (IMC) PLAT earlier than version 7.3 E0506P09. |
| A command injection vulnerability is present in the web management interface of ArubaOS that permits an authenticated user to execute arbitrary commands on the underlying operating system. A malicious administrator could use this ability to install backdoors or change system configuration in a way that would not be logged. This vulnerability only affects ArubaOS 8.x. |
| USG9500 with versions of V500R001C30;V500R001C60 have a denial of service vulnerability. Due to a flaw in the X.509 implementation in the affected products which can result in a heap buffer overflow when decoding a certificate, an attacker may exploit the vulnerability by a malicious certificate to perform a denial of service attack on the affected products. |
| Certain detection module of P30, P30 Pro, Honor V20 smartphone whith Versions earlier than ELLE-AL00B 9.1.0.193(C00E190R1P21), Versions earlier than VOGUE-AL00A 9.1.0.193(C00E190R1P12), Versions earlier than Princeton-AL10B 9.1.0.233(C00E233R4P3) have a race condition vulnerability. The system does not lock certain function properly, when the function is called by multiple processes could cause out of bound write. An attacker tricks the user into installing a malicious application, successful exploit could cause malicious code execution. |
| An exploitable out-of-bounds write vulnerability exists in the TIFreadstripdata function of the igcore19d.dll library of Accusoft ImageGear 19.5.0. A specially crafted TIFF file file can cause an out-of-bounds write, resulting in a remote code execution. An attacker needs to provide a malformed file to the victim to trigger the vulnerability. |
| An exploitable stack buffer overflow vulnerability vulnerability exists in the iocheckd service "I/O-Check" functionality of WAGO PFC 200. An attacker can send a specially crafted packet to trigger the parsing of this cache file.At 0x1eb9c the extracted interface element name from the xml file is used as an argument to /etc/config-tools/config_interfaces interface=<contents of interface element> using sprintf(). The destination buffer sp+0x40 is overflowed with the call to sprintf() for any interface values that are greater than 512-len("/etc/config-tools/config_interfaces interface=") in length. Later, at 0x1ea08 strcpy() is used to copy the contents of the stack buffer that was overflowed sp+0x40 into sp+0x440. The buffer sp+0x440 is immediately adjacent to sp+0x40 on the stack. Therefore, there is no NULL termination on the buffer sp+0x40 since it overflowed into sp+0x440. The strcpy() will result in invalid memory access. An interface value of length 0x3c4 will cause the service to crash. |
| An exploitable stack buffer overflow vulnerability vulnerability exists in the iocheckd service "I/O-Check" functionality of WAGO PFC 200. An attacker can send a specially crafted packet to trigger the parsing of this cache file. At 0x1ea28 the extracted state value from the xml file is used as an argument to /etc/config-tools/config_interfaces interface=X1 state=<contents of state node> using sprintf(). The destination buffer sp+0x40 is overflowed with the call to sprintf() for any state values that are greater than 512-len("/etc/config-tools/config_interfaces interface=X1 state=") in length. Later, at 0x1ea08 strcpy() is used to copy the contents of the stack buffer that was overflowed sp+0x40 into sp+0x440. The buffer sp+0x440 is immediately adjacent to sp+0x40 on the stack. Therefore, there is no NULL termination on the buffer sp+0x40 since it overflowed into sp+0x440. The strcpy() will result in invalid memory access. An state value of length 0x3c9 will cause the service to crash. |
| An exploitable stack buffer overflow vulnerability vulnerability exists in the iocheckd service ‘I/O-Check’ functionality of WAGO PFC 200 Firmware version 03.02.02(14). An attacker can send a specially crafted packet to trigger the parsing of this cache file.The destination buffer sp+0x440 is overflowed with the call to sprintf() for any type values that are greater than 1024-len(‘/etc/config-tools/config_interfaces interface=X1 state=enabled config-type=‘) in length. A type value of length 0x3d9 will cause the service to crash. |
| An exploitable stack buffer overflow vulnerability vulnerability exists in the iocheckd service ‘I/O-Check’ functionality of WAGO PFC 200 Firmware version 03.02.02(14). A specially crafted XML cache file written to a specific location on the device can cause a stack buffer overflow, resulting in code execution. An attacker can send a specially crafted packet to trigger the parsing of this cache file. The destination buffer sp+0x440 is overflowed with the call to sprintf() for any subnetmask values that are greater than 1024-len(‘/etc/config-tools/config_interfaces interface=X1 state=enabled subnet-mask=‘) in length. A subnetmask value of length 0x3d9 will cause the service to crash. |
| An exploitable stack buffer overflow vulnerability vulnerability exists in the iocheckd service ‘I/O-Check’ functionality of WAGO PFC 200 Firmware version 03.02.02(14). An attacker can send a specially crafted packet to trigger the parsing of this cache file. The destination buffer sp+0x440 is overflowed with the call to sprintf() for any ip values that are greater than 1024-len(‘/etc/config-tools/config_interfaces interface=X1 state=enabled ip-address=‘) in length. A ip value of length 0x3da will cause the service to crash. |
| An exploitable stack buffer overflow vulnerability vulnerability exists in the iocheckd service ‘I/O-Check’ functionality of WAGO PFC 200 Firmware version 03.02.02(14). An attacker can send a specially crafted packet to trigger the parsing of this cache file. |
| An exploitable stack buffer overflow vulnerability vulnerability exists in the iocheckd service ‘I/O-Check’ functionality of WAGO PFC 200 Firmware version 03.02.02(14). An attacker can send a specially crafted packet to trigger the parsing of this cache file. The destination buffer sp+0x440 is overflowed with the call to sprintf() for any hostname values that are greater than 1024-len(‘/etc/config-tools/change_hostname hostname=‘) in length. A hostname value of length 0x3fd will cause the service to crash. |
| An exploitable stack buffer overflow vulnerability vulnerability exists in the iocheckd service ‘I/O-Check’ functionality of WAGO PFC 200 Firmware version 03.02.02(14). The destination buffer sp+0x440 is overflowed with the call to sprintf() for any domainname values that are greater than 1024-len(‘/etc/config-tools/edit_dns_server domain-name=‘) in length. A domainname value of length 0x3fa will cause the service to crash. |
| An exploitable stack buffer overflow vulnerability vulnerability exists in the iocheckd service ‘I/O-Check’ functionality of WAGO PFC 200 Firmware version 03.02.02(14). An attacker can send a specially crafted packet to trigger the parsing of this cache file.The destination buffer sp+0x40 is overflowed with the call to sprintf() for any gateway values that are greater than 512-len(‘/etc/config-tools/config_default_gateway number=0 state=enabled value=‘) in length. A gateway value of length 0x7e2 will cause the service to crash. |
| An exploitable command injection vulnerability exists in the iocheckd service ‘I/O-Check’ function of the WAGO PFC 200 Firmware version 03.02.02(14). A specially crafted XML cache file written to a specific location on the device can be used to inject OS commands. An attacker can send a specially crafted packet to trigger the parsing of this cache file.At 0x1ea28 the extracted type value from the xml file is used as an argument to /etc/config-tools/config_interfaces interface=X1 state=enabled config-type=<contents of type node> using sprintf(). This command is later executed via a call to system(). |
| An exploitable command injection vulnerability exists in the iocheckd service ‘I/O-Check’ function of the WAGO PFC 200 version 03.02.02(14). A specially crafted XML cache file written to a specific location on the device can be used to inject OS commands. An attacker can send a specially crafted packet to trigger the parsing of this cache file.At 0x1e9fc the extracted subnetmask value from the xml file is used as an argument to /etc/config-tools/config_interfaces interface=X1 state=enabled subnet-mask=<contents of subnetmask node> using sprintf(). This command is later executed via a call to system(). |
| An exploitable command injection vulnerability exists in the iocheckd service ‘I/O-Check’ function of the WAGO PFC 200 Firmware version 03.02.02(14). A specially crafted XML cache file written to a specific location on the device can be used to inject OS commands. An attacker can send a specially crafted packet to trigger the parsing of this cache file. At 0x1e9fc the extracted state value from the xml file is used as an argument to /etc/config-tools/config_interfaces interface=X1 state=<contents of state node> using sprintf(). This command is later executed via a call to system(). |
