| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
of: unittest: fix use-after-free in of_unittest_changeset()
The variable 'parent' is assigned the value of 'nchangeset' earlier in the
function, meaning both point to the same struct device_node. The call to
of_node_put(nchangeset) can decrement the reference count to zero and
free the node if there are no other holders. After that, the code still
uses 'parent' to check for the presence of a property and to read a
string property, leading to a use-after-free.
Fix this by moving the of_node_put() call after the last access to
'parent', avoiding the UAF. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/zone_device: do not touch device folio after calling ->folio_free()
The contents of a device folio can immediately change after calling
->folio_free(), as the folio may be reallocated by a driver with a
different order. Instead of touching the folio again to extract the
pgmap, use the local stack variable when calling percpu_ref_put_many(). |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_uart: fix UAFs and race conditions in close and init paths
Vulnerabilities leading to Use-After-Free (UAF) and Null Pointer
Dereference (NPD) conditions were observed in the lifecycle management
of hci_uart.
The primary issue arises because the workqueues (init_ready and
write_work) are only flushed/cancelled if the HCI_UART_PROTO_READY
flag is set during TTY close. If a hangup occurs before setup completes,
hci_uart_tty_close() skips the teardown of these workqueues and
proceeds to free the `hu` struct. When the scheduled work executes
later, it blindly dereferences the freed `hu` struct.
Furthermore, several data races and UAFs were identified in the teardown
sequence:
1. Calling hci_uart_flush() from hci_uart_close() without effectively
disabling write_work causes a race condition where both can concurrently
double-free hu->tx_skb. This happens because protocol timers can
concurrently invoke hci_uart_tx_wakeup() and requeue write_work.
2. Calling hci_free_dev(hdev) before hu->proto->close(hu) causes a UAF
when vendor specific protocol close callbacks dereference hu->hdev.
3. In the initialization error paths, failing to take the proto_lock
write lock before clearing PROTO_READY leads to races with active
readers. Additionally, hci_uart_tty_receive() accesses hu->hdev
outside the read lock, leading to UAFs if the initialization error
path frees hdev concurrently.
Fix these synchronization and lifecycle issues by:
1. Re-ordering hci_uart_tty_close() to clear HCI_UART_PROTO_READY first,
followed immediately by a cancel_work_sync(&hu->write_work). Clearing
the flag locks out concurrent protocol timers from successfully invoking
hci_uart_tx_wakeup(), effectively rendering the cancellation permanent
and preventing the tx_skb double-free.
2. Note: Clearing PROTO_READY early causes hci_uart_close() to skip
hu->proto->flush(). This is perfectly safe in the tty_close path
because hu->proto->close() executes shortly after, which intrinsically
purges all protocol SKB queues and tears down the state.
3. Relocating hu->proto->close(hu) strictly prior to hci_free_dev(hdev)
across all close and error paths to prevent vendor-level UAFs.
4. Moving the hdev->stat.byte_rx increment in hci_uart_tty_receive()
inside the proto_lock read-side critical section to safely synchronize
with device unregistration.
5. Adding cancel_work_sync(&hu->write_work) to hci_uart_close() to safely
flush the workqueue before hci_uart_flush() is invoked via the HCI core.
6. Utilizing cancel_work_sync() instead of disable_work_sync() across
all paths to prevent permanently breaking user-space retry capabilities. |
| A NULL pointer dereference in the gf_odf_vvc_cfg_write_bs function (odf/descriptors.c) of GPAC MP4Box v2.4 allows attackers to cause a Denial of Service (DoS) via supplying a crafted MP4 file. |
| A segmentation violaton in the gf_hevc_read_sps_bs_internal function (media_tools/av_parsers.c) of GPAC MP4Box v2.4 allows attackers to cause a Denial of Service (DoS) via supplying crafted HEVC SPS data. |
| A stack buffer overflow in the filein_process function (in_file.c) of GPAC MP4Box v2.4 allows attackers to cause a Denial of Service (DoS) via supplying a crafted MP4 file. |
| ApostropheCMS is an open-source Node.js content management system. Versions up to and including 4.29.0 have a password reset flow that constructs the reset URL using `req.hostname`, which is derived directly from the attacker-controlled HTTP `Host` header when `apos.baseUrl` is not explicitly configured. An unauthenticated attacker who knows a victim's email address can send a crafted reset request that causes the application to email the victim a reset link pointing to the attacker's domain. When the victim clicks the link, the valid reset token is delivered to the attacker, enabling full account takeover. As of time of publication, no known patched versions are available. |
| Nezha Monitoring is a self-hostable, lightweight, servers and websites monitoring and O&M tool. From version 1.4.0 to before version 2.0.8, nezha's dashboard supports two user roles: RoleAdmin (Role==0) and RoleMember (Role==1). The notification routes POST /api/v1/notification and PATCH /api/v1/notification/:id are wired through commonHandler rather than adminHandler — so a RoleMember user can call them. These handlers synchronously Send() an HTTP request to a user-controlled URL and reflect the entire response body (no size limit) back to the caller on any non-2xx response. This issue has been patched in version 2.0.8. |
| Nezha Monitoring is a self-hostable, lightweight, servers and websites monitoring and O&M tool. From version 1.0.0 to before version 2.0.14, cross-site GET request can trigger stored cron commands on a victim's agents. This issue has been patched in version 2.0.14. |
| The WP Ticket plugin for WordPress is vulnerable to SQL Injection via the WordPress search query parameter (`s`) in versions up to, and including, 6.0.4 The plugin hooks WordPress's `posts_request` filter with `wp_ticket_com_posts_request()`, which calls `emd_author_search_results()` when the current request is an unauthenticated front-end search. That function reads `$query->query_vars['s']` — already wp_unslash()'d by `WP_Query::parse_query()`, so wp_magic_quotes protection has been stripped — and concatenates the raw value into a SQL `LIKE` clause inside a UNION sub-SELECT appended to the main query, with no `$wpdb->prepare()` or escaping. This makes it possible for unauthenticated attackers to append additional SQL queries into already-existing queries that can be used to extract sensitive information from the database. |
| Koel is a free, open-source music streaming solution. Prior to version 9.3.5, Koel validates the podcast feed URL via the SafeUrl rule (DNS resolution + public IP check), but the individual episode <enclosure url="..."> values extracted from the RSS XML are stored directly into the database without any SSRF validation. When a user plays an episode, the server downloads the full HTTP response from the unvalidated enclosure URL via Http::sink()->get() and streams it back to the user, enabling full-read SSRF against internal services. This issue has been patched in version 9.3.5. |
| vm2 is an open source vm/sandbox for Node.js. Prior to version 3.11.4, NodeVM exposes some process-wide observability builtins when they are allowed through require.builtin. The diagnostics_channel, async_hooks, and perf_hooks builtins are not blocked by the dangerous builtin denylist. These modules are process-wide, not sandbox-local. Sandboxed code can use them to observe host application data across the vm2 boundary. This issue has been patched in version 3.11.4. |
| vm2 is an open source vm/sandbox for Node.js. Prior to version 3.11.4, Symbol.for override in setup-sandbox.js only intercepts 2 of 9 dangerous Node.js cross-realm symbols. Combined with the bridge's set/defineProperty/deleteProperty traps having no isDangerousCrossRealmSymbol key check, sandbox code can obtain real cross-realm symbols, write them to host objects, and control host-side behavior — verified with a full util.promisify hijack chain. This issue has been patched in version 3.11.4. |
| Inappropriate implementation in DevTools in Google Chrome prior to 149.0.7827.115 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High) |
| OpenClaw before 2026.5.20 contains a privilege escalation vulnerability where hook-triggered agent runs incorrectly receive owner-scoped MCP loopback authority instead of hook-appropriate scope. Attackers with a valid hook token can exploit the /hooks/agent endpoint to cause spawned CLI runtimes to access or invoke owner-only MCP tools, potentially executing privileged actions like persistent cron state modifications. |
| Garlic-Hub manages digital signage network — devices, content, and playlists — from a single self-hosted interface. Prior to version 1.1, authenticated users can cause the server to issue arbitrary HTTP requests to internal services via the uploadFromUrl endpoint. This allows internal port scanning, service fingerprinting, and retrieval of internal HTTP responses which are stored in the publicly accessible media pool. This issue has been patched in version 1.1. |
| Use after free in Cast in Google Chrome prior to 149.0.7827.115 allowed an attacker on the local network segment to potentially perform a sandbox escape via malicious network traffic. (Chromium security severity: High) |
| Heap buffer overflow in Codecs in Google Chrome on Linux and ChromeOS prior to 149.0.7827.115 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High) |
| Use after free in Autofill in Google Chrome on Mac prior to 149.0.7827.115 allowed a remote attacker to potentially exploit heap corruption via a crafted HTML page. (Chromium security severity: High) |
| Race in Safe Browsing in Google Chrome on Mac prior to 149.0.7827.115 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a malicious file. (Chromium security severity: High) |
