| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
kprobes/x86: Use copy_from_kernel_nofault() to read from unsafe address
Read from an unsafe address with copy_from_kernel_nofault() in
arch_adjust_kprobe_addr() because this function is used before checking
the address is in text or not. Syzcaller bot found a bug and reported
the case if user specifies inaccessible data area,
arch_adjust_kprobe_addr() will cause a kernel panic.
[ mingo: Clarified the comment. ] |
| In the Linux kernel, the following vulnerability has been resolved:
ARM: 9359/1: flush: check if the folio is reserved for no-mapping addresses
Since commit a4d5613c4dc6 ("arm: extend pfn_valid to take into account
freed memory map alignment") changes the semantics of pfn_valid() to check
presence of the memory map for a PFN. A valid page for an address which
is reserved but not mapped by the kernel[1], the system crashed during
some uio test with the following memory layout:
node 0: [mem 0x00000000c0a00000-0x00000000cc8fffff]
node 0: [mem 0x00000000d0000000-0x00000000da1fffff]
the uio layout is：0xc0900000, 0x100000
the crash backtrace like:
Unable to handle kernel paging request at virtual address bff00000
[...]
CPU: 1 PID: 465 Comm: startapp.bin Tainted: G O 5.10.0 #1
Hardware name: Generic DT based system
PC is at b15_flush_kern_dcache_area+0x24/0x3c
LR is at __sync_icache_dcache+0x6c/0x98
[...]
(b15_flush_kern_dcache_area) from (__sync_icache_dcache+0x6c/0x98)
(__sync_icache_dcache) from (set_pte_at+0x28/0x54)
(set_pte_at) from (remap_pfn_range+0x1a0/0x274)
(remap_pfn_range) from (uio_mmap+0x184/0x1b8 [uio])
(uio_mmap [uio]) from (__mmap_region+0x264/0x5f4)
(__mmap_region) from (__do_mmap_mm+0x3ec/0x440)
(__do_mmap_mm) from (do_mmap+0x50/0x58)
(do_mmap) from (vm_mmap_pgoff+0xfc/0x188)
(vm_mmap_pgoff) from (ksys_mmap_pgoff+0xac/0xc4)
(ksys_mmap_pgoff) from (ret_fast_syscall+0x0/0x5c)
Code: e0801001 e2423001 e1c00003 f57ff04f (ee070f3e)
---[ end trace 09cf0734c3805d52 ]---
Kernel panic - not syncing: Fatal exception
So check if PG_reserved was set to solve this issue.
[1]: https://lore.kernel.org/lkml/[email protected]/ |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Add a dc_state NULL check in dc_state_release
[How]
Check wheather state is NULL before releasing it. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btnxpuart: Fix btnxpuart_close
Fix scheduling while atomic BUG in btnxpuart_close(), properly
purge the transmit queue and free the receive skb.
[ 10.973809] BUG: scheduling while atomic: kworker/u9:0/80/0x00000002
...
[ 10.980740] CPU: 3 PID: 80 Comm: kworker/u9:0 Not tainted 6.8.0-rc7-0.0.0-devel-00005-g61fdfceacf09 #1
[ 10.980751] Hardware name: Toradex Verdin AM62 WB on Dahlia Board (DT)
[ 10.980760] Workqueue: hci0 hci_power_off [bluetooth]
[ 10.981169] Call trace:
...
[ 10.981363] uart_update_mctrl+0x58/0x78
[ 10.981373] uart_dtr_rts+0x104/0x114
[ 10.981381] tty_port_shutdown+0xd4/0xdc
[ 10.981396] tty_port_close+0x40/0xbc
[ 10.981407] uart_close+0x34/0x9c
[ 10.981414] ttyport_close+0x50/0x94
[ 10.981430] serdev_device_close+0x40/0x50
[ 10.981442] btnxpuart_close+0x24/0x98 [btnxpuart]
[ 10.981469] hci_dev_close_sync+0x2d8/0x718 [bluetooth]
[ 10.981728] hci_dev_do_close+0x2c/0x70 [bluetooth]
[ 10.981862] hci_power_off+0x20/0x64 [bluetooth] |
| In the Linux kernel, the following vulnerability has been resolved:
usb: dwc3-am62: fix module unload/reload behavior
As runtime PM is enabled, the module can be runtime
suspended when .remove() is called.
Do a pm_runtime_get_sync() to make sure module is active
before doing any register operations.
Doing a pm_runtime_put_sync() should disable the refclk
so no need to disable it again.
Fixes the below warning at module removel.
[ 39.705310] ------------[ cut here ]------------
[ 39.710004] clk:162:3 already disabled
[ 39.713941] WARNING: CPU: 0 PID: 921 at drivers/clk/clk.c:1090 clk_core_disable+0xb0/0xb8
We called of_platform_populate() in .probe() so call the
cleanup function of_platform_depopulate() in .remove().
Get rid of the now unnnecessary dwc3_ti_remove_core().
Without this, module re-load doesn't work properly. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Fix off by one in qla_edif_app_getstats()
The app_reply->elem[] array is allocated earlier in this function and it
has app_req.num_ports elements. Thus this > comparison needs to be >= to
prevent memory corruption. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: fix nft_counters_enabled underflow at nf_tables_addchain()
syzbot is reporting underflow of nft_counters_enabled counter at
nf_tables_addchain() [1], for commit 43eb8949cfdffa76 ("netfilter:
nf_tables: do not leave chain stats enabled on error") missed that
nf_tables_chain_destroy() after nft_basechain_init() in the error path of
nf_tables_addchain() decrements the counter because nft_basechain_init()
makes nft_is_base_chain() return true by setting NFT_CHAIN_BASE flag.
Increment the counter immediately after returning from
nft_basechain_init(). |
| In the Linux kernel, the following vulnerability has been resolved:
media: nxp: imx8-isi: Check whether crossbar pad is non-NULL before access
When translating source to sink streams in the crossbar subdev, the
driver tries to locate the remote subdev connected to the sink pad. The
remote pad may be NULL, if userspace tries to enable a stream that ends
at an unconnected crossbar sink. When that occurs, the driver
dereferences the NULL pad, leading to a crash.
Prevent the crash by checking if the pad is NULL before using it, and
return an error if it is. |
| In the Linux kernel, the following vulnerability has been resolved:
qibfs: fix dentry leak
simple_recursive_removal() drops the pinning references to all positives
in subtree. For the cases when its argument has been kept alive by
the pinning alone that's exactly the right thing to do, but here
the argument comes from dcache lookup, that needs to be balanced by
explicit dput().
Fucked-up-by: Al Viro <[email protected]> |
| In the Linux kernel, the following vulnerability has been resolved:
xdp: use flags field to disambiguate broadcast redirect
When redirecting a packet using XDP, the bpf_redirect_map() helper will set
up the redirect destination information in struct bpf_redirect_info (using
the __bpf_xdp_redirect_map() helper function), and the xdp_do_redirect()
function will read this information after the XDP program returns and pass
the frame on to the right redirect destination.
When using the BPF_F_BROADCAST flag to do multicast redirect to a whole
map, __bpf_xdp_redirect_map() sets the 'map' pointer in struct
bpf_redirect_info to point to the destination map to be broadcast. And
xdp_do_redirect() reacts to the value of this map pointer to decide whether
it's dealing with a broadcast or a single-value redirect. However, if the
destination map is being destroyed before xdp_do_redirect() is called, the
map pointer will be cleared out (by bpf_clear_redirect_map()) without
waiting for any XDP programs to stop running. This causes xdp_do_redirect()
to think that the redirect was to a single target, but the target pointer
is also NULL (since broadcast redirects don't have a single target), so
this causes a crash when a NULL pointer is passed to dev_map_enqueue().
To fix this, change xdp_do_redirect() to react directly to the presence of
the BPF_F_BROADCAST flag in the 'flags' value in struct bpf_redirect_info
to disambiguate between a single-target and a broadcast redirect. And only
read the 'map' pointer if the broadcast flag is set, aborting if that has
been cleared out in the meantime. This prevents the crash, while keeping
the atomic (cmpxchg-based) clearing of the map pointer itself, and without
adding any more checks in the non-broadcast fast path. |
| In the Linux kernel, the following vulnerability has been resolved:
efi/unaccepted: touch soft lockup during memory accept
Commit 50e782a86c98 ("efi/unaccepted: Fix soft lockups caused by
parallel memory acceptance") has released the spinlock so other CPUs can
do memory acceptance in parallel and not triggers softlockup on other
CPUs.
However the softlock up was intermittent shown up if the memory of the
TD guest is large, and the timeout of softlockup is set to 1 second:
RIP: 0010:_raw_spin_unlock_irqrestore
Call Trace:
? __hrtimer_run_queues
<IRQ>
? hrtimer_interrupt
? watchdog_timer_fn
? __sysvec_apic_timer_interrupt
? __pfx_watchdog_timer_fn
? sysvec_apic_timer_interrupt
</IRQ>
? __hrtimer_run_queues
<TASK>
? hrtimer_interrupt
? asm_sysvec_apic_timer_interrupt
? _raw_spin_unlock_irqrestore
? __sysvec_apic_timer_interrupt
? sysvec_apic_timer_interrupt
accept_memory
try_to_accept_memory
do_huge_pmd_anonymous_page
get_page_from_freelist
__handle_mm_fault
__alloc_pages
__folio_alloc
? __tdx_hypercall
handle_mm_fault
vma_alloc_folio
do_user_addr_fault
do_huge_pmd_anonymous_page
exc_page_fault
? __do_huge_pmd_anonymous_page
asm_exc_page_fault
__handle_mm_fault
When the local irq is enabled at the end of accept_memory(), the
softlockup detects that the watchdog on single CPU has not been fed for
a while. That is to say, even other CPUs will not be blocked by
spinlock, the current CPU might be stunk with local irq disabled for a
while, which hurts not only nmi watchdog but also softlockup.
Chao Gao pointed out that the memory accept could be time costly and
there was similar report before. Thus to avoid any softlocup detection
during this stage, give the softlockup a flag to skip the timeout check
at the end of accept_memory(), by invoking touch_softlockup_watchdog(). |
| In the Linux kernel, the following vulnerability has been resolved:
block: fix overflow in blk_ioctl_discard()
There is no check for overflow of 'start + len' in blk_ioctl_discard().
Hung task occurs if submit an discard ioctl with the following param:
start = 0x80000000000ff000, len = 0x8000000000fff000;
Add the overflow validation now. |
| In the Linux kernel, the following vulnerability has been resolved:
ARM: 9381/1: kasan: clear stale stack poison
We found below OOB crash:
[ 33.452494] ==================================================================
[ 33.453513] BUG: KASAN: stack-out-of-bounds in refresh_cpu_vm_stats.constprop.0+0xcc/0x2ec
[ 33.454660] Write of size 164 at addr c1d03d30 by task swapper/0/0
[ 33.455515]
[ 33.455767] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G O 6.1.25-mainline #1
[ 33.456880] Hardware name: Generic DT based system
[ 33.457555] unwind_backtrace from show_stack+0x18/0x1c
[ 33.458326] show_stack from dump_stack_lvl+0x40/0x4c
[ 33.459072] dump_stack_lvl from print_report+0x158/0x4a4
[ 33.459863] print_report from kasan_report+0x9c/0x148
[ 33.460616] kasan_report from kasan_check_range+0x94/0x1a0
[ 33.461424] kasan_check_range from memset+0x20/0x3c
[ 33.462157] memset from refresh_cpu_vm_stats.constprop.0+0xcc/0x2ec
[ 33.463064] refresh_cpu_vm_stats.constprop.0 from tick_nohz_idle_stop_tick+0x180/0x53c
[ 33.464181] tick_nohz_idle_stop_tick from do_idle+0x264/0x354
[ 33.465029] do_idle from cpu_startup_entry+0x20/0x24
[ 33.465769] cpu_startup_entry from rest_init+0xf0/0xf4
[ 33.466528] rest_init from arch_post_acpi_subsys_init+0x0/0x18
[ 33.467397]
[ 33.467644] The buggy address belongs to stack of task swapper/0/0
[ 33.468493] and is located at offset 112 in frame:
[ 33.469172] refresh_cpu_vm_stats.constprop.0+0x0/0x2ec
[ 33.469917]
[ 33.470165] This frame has 2 objects:
[ 33.470696] [32, 76) 'global_zone_diff'
[ 33.470729] [112, 276) 'global_node_diff'
[ 33.471294]
[ 33.472095] The buggy address belongs to the physical page:
[ 33.472862] page:3cd72da8 refcount:1 mapcount:0 mapping:00000000 index:0x0 pfn:0x41d03
[ 33.473944] flags: 0x1000(reserved|zone=0)
[ 33.474565] raw: 00001000 ed741470 ed741470 00000000 00000000 00000000 ffffffff 00000001
[ 33.475656] raw: 00000000
[ 33.476050] page dumped because: kasan: bad access detected
[ 33.476816]
[ 33.477061] Memory state around the buggy address:
[ 33.477732] c1d03c00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 33.478630] c1d03c80: 00 00 00 00 00 00 00 00 f1 f1 f1 f1 00 00 00 00
[ 33.479526] >c1d03d00: 00 04 f2 f2 f2 f2 00 00 00 00 00 00 f1 f1 f1 f1
[ 33.480415] ^
[ 33.481195] c1d03d80: 00 00 00 00 00 00 00 00 00 00 04 f3 f3 f3 f3 f3
[ 33.482088] c1d03e00: f3 f3 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00
[ 33.482978] ==================================================================
We find the root cause of this OOB is that arm does not clear stale stack
poison in the case of cpuidle.
This patch refer to arch/arm64/kernel/sleep.S to resolve this issue.
From cited commit [1] that explain the problem
Functions which the compiler has instrumented for KASAN place poison on
the stack shadow upon entry and remove this poison prior to returning.
In the case of cpuidle, CPUs exit the kernel a number of levels deep in
C code. Any instrumented functions on this critical path will leave
portions of the stack shadow poisoned.
If CPUs lose context and return to the kernel via a cold path, we
restore a prior context saved in __cpu_suspend_enter are forgotten, and
we never remove the poison they placed in the stack shadow area by
functions calls between this and the actual exit of the kernel.
Thus, (depending on stackframe layout) subsequent calls to instrumented
functions may hit this stale poison, resulting in (spurious) KASAN
splats to the console.
To avoid this, clear any stale poison from the idle thread for a CPU
prior to bringing a CPU online.
From cited commit [2]
Extend to check for CONFIG_KASAN_STACK
[1] commit 0d97e6d8024c ("arm64: kasan: clear stale stack poison")
[2] commit d56a9ef84bd0 ("kasan, arm64: unpoison stack only with CONFIG_KASAN_STACK") |
| IBM Security Verify Information Queue 10.0.5, 10.0.6, 10.0.7, and 10.0.8 could allow a remote user to cause a denial of service due to improper handling of special characters that could lead to uncontrolled resource consumption. |
| IBM Security Verify Information Queue 10.0.5, 10.0.6, 10.0.7, and 10.0.8
uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. |
| In the Linux kernel, the following vulnerability has been resolved:
r8169: Fix possible ring buffer corruption on fragmented Tx packets.
An issue was found on the RTL8125b when transmitting small fragmented
packets, whereby invalid entries were inserted into the transmit ring
buffer, subsequently leading to calls to dma_unmap_single() with a null
address.
This was caused by rtl8169_start_xmit() not noticing changes to nr_frags
which may occur when small packets are padded (to work around hardware
quirks) in rtl8169_tso_csum_v2().
To fix this, postpone inspecting nr_frags until after any padding has been
applied. |
| In the Linux kernel, the following vulnerability has been resolved:
tools/nolibc/stdlib: fix memory error in realloc()
Pass user_p_len to memcpy() instead of heap->len to prevent realloc()
from copying an extra sizeof(heap) bytes from beyond the allocated
region. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix verifier assumptions about socket->sk
The verifier assumes that 'sk' field in 'struct socket' is valid
and non-NULL when 'socket' pointer itself is trusted and non-NULL.
That may not be the case when socket was just created and
passed to LSM socket_accept hook.
Fix this verifier assumption and adjust tests. |
| In the Linux kernel, the following vulnerability has been resolved:
tracefs: Reset permissions on remount if permissions are options
There's an inconsistency with the way permissions are handled in tracefs.
Because the permissions are generated when accessed, they default to the
root inode's permission if they were never set by the user. If the user
sets the permissions, then a flag is set and the permissions are saved via
the inode (for tracefs files) or an internal attribute field (for
eventfs).
But if a remount happens that specify the permissions, all the files that
were not changed by the user gets updated, but the ones that were are not.
If the user were to remount the file system with a given permission, then
all files and directories within that file system should be updated.
This can cause security issues if a file's permission was updated but the
admin forgot about it. They could incorrectly think that remounting with
permissions set would update all files, but miss some.
For example:
# cd /sys/kernel/tracing
# chgrp 1002 current_tracer
# ls -l
[..]
-rw-r----- 1 root root 0 May 1 21:25 buffer_size_kb
-rw-r----- 1 root root 0 May 1 21:25 buffer_subbuf_size_kb
-r--r----- 1 root root 0 May 1 21:25 buffer_total_size_kb
-rw-r----- 1 root lkp 0 May 1 21:25 current_tracer
-rw-r----- 1 root root 0 May 1 21:25 dynamic_events
-r--r----- 1 root root 0 May 1 21:25 dyn_ftrace_total_info
-r--r----- 1 root root 0 May 1 21:25 enabled_functions
Where current_tracer now has group "lkp".
# mount -o remount,gid=1001 .
# ls -l
-rw-r----- 1 root tracing 0 May 1 21:25 buffer_size_kb
-rw-r----- 1 root tracing 0 May 1 21:25 buffer_subbuf_size_kb
-r--r----- 1 root tracing 0 May 1 21:25 buffer_total_size_kb
-rw-r----- 1 root lkp 0 May 1 21:25 current_tracer
-rw-r----- 1 root tracing 0 May 1 21:25 dynamic_events
-r--r----- 1 root tracing 0 May 1 21:25 dyn_ftrace_total_info
-r--r----- 1 root tracing 0 May 1 21:25 enabled_functions
Everything changed but the "current_tracer".
Add a new link list that keeps track of all the tracefs_inodes which has
the permission flags that tell if the file/dir should use the root inode's
permission or not. Then on remount, clear all the flags so that the
default behavior of using the root inode's permission is done for all
files and directories. |
| In the Linux kernel, the following vulnerability has been resolved:
net: fix information leakage in /proc/net/ptype
In one net namespace, after creating a packet socket without binding
it to a device, users in other net namespaces can observe the new
`packet_type` added by this packet socket by reading `/proc/net/ptype`
file. This is minor information leakage as packet socket is
namespace aware.
Add a net pointer in `packet_type` to keep the net namespace of
of corresponding packet socket. In `ptype_seq_show`, this net pointer
must be checked when it is not NULL. |
