| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
dm-verity: fix a possible NULL pointer dereference
Fix a possible NULL pointer dereference dm_verity_loadpin_is_bdev_trusted
if the device has no table. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-verity: make error counter atomic
The error counter "v->corrupted_errs" was not atomic, thus it could be
subject to race conditions. The call to
dm_audit_log_target("max-corrupted-errors") may be skipped due to the
races. |
| In the Linux kernel, the following vulnerability has been resolved:
dma-buf: dma-fence: Fix potential NULL pointer dereference
The commit mentioned in the fixes tag below introduced a mechanism
through which fence producers can fully decouple from fence consumers.
This, desirable, mechanism is based on the fence's signaled-bit as the
"decoupling point".
A sophisticated interaction between RCU and atomic instructions attempts
to ensure that fence consumers can still interact with fence producers
through the dma_fence_ops (callback pointers into the producer).
This is the desired behavior: to check for decoupling, the signaled-bit
is first checked. If it's not yet signaled, RCU ensures that the ops
pointer cannot yet be NULL.
Hereby, dma_fence_signal_timestamp_locked() first sets the signaled-bit,
and then sets the ops pointer to NULL. Readers first load the ops
pointer, and then check through the signaled-bit whether the pointer can
legally be accessed.
These set and load operations could occur out of order on weakly ordered
platforms. This problem can be solved very elegantly by using the ops
pointer itself as the synchronization point. The pointer is either NULL,
or cannot become NULL while it is being used thanks to RCU.
Replace the signaled-bit check in dma_fence_timeline_name() and
dma_fence_driver_name(). |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: reject user command submission without a command BO
amdxdna_drm_submit_execbuf() passes the user-supplied command BO handle
straight into amdxdna_cmd_submit() with drv_cmd == NULL. When the handle
is AMDXDNA_INVALID_BO_HANDLE (0), the block that fetches job->cmd_bo is
skipped, leaving it NULL, and no check rejects it on the user path (the
!job->cmd_bo guard lives inside the != INVALID branch).
The job is then armed and pushed to the DRM scheduler.
aie2_sched_job_run() takes the drv_cmd == NULL path and calls
amdxdna_cmd_set_state(job->cmd_bo) -> amdxdna_gem_vmap(NULL) ->
to_gobj(NULL)->dev, a NULL pointer dereference in the drm_sched worker.
A process with access to the accel node on a system with a probed AMD NPU
can trigger a kernel oops with a single AMDXDNA_EXEC_CMD ioctl
(cmd_handles = 0).
Only internal driver commands (SYNC_DEBUG_BO / ATTACH_DEBUG_BO)
legitimately pass AMDXDNA_INVALID_BO_HANDLE, and they always set drv_cmd.
Reject the invalid handle for user submissions (drv_cmd == NULL) at the
submit choke point so every user path is covered.
Found by 0sec automated security-research tooling (https://0sec.ai). |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: hpsa: Fix DMA mapping leak on IOACCEL2 reset path
If phys_disk->in_reset is set, the function returns directly without
undoing the resources acquired for the command. Add the missing error
cleanup by unmapping the IOACCEL2 SG chain block when needed, unmapping
the SCSI command, and dropping the outstanding IOACCEL command count
before returning. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: lpfc: Fix memory leak in lpfc_sli4_driver_resource_setup()
The memory allocated for mboxq using mempool_alloc() is not freed in
some of the early exit error paths. Fix that by moving the
mempool_free() call to an earlier point after last use. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: xen: scsiback: Free the command tag on the TMR submit-failure path
scsiback_device_action() obtains a command tag in
scsiback_get_pend_req() and submits a task-management request with
target_submit_tmr(). When target_submit_tmr() fails it returns < 0 and
scsiback jumps to the err: label, which sends a response but frees
nothing, leaking the tag.
Impact: a pvSCSI guest can leak the command tags of a LUN's session,
stopping the LUN, by issuing VSCSIIF_ACT_SCSI_ABORT or RESET requests
whenever target_submit_tmr() fails.
transport_generic_free_cmd() cannot be used here. By the time
target_submit_tmr() returns an error it has already run
__target_init_cmd() (so se_cmd->cmd_kref is one, not zero), and on its
target_get_sess_cmd() error path it has freed se_cmd->se_tmr_req via
core_tmr_release_req() while leaving SCF_SCSI_TMR_CDB set and the
pointer dangling. Letting the command release run target_free_cmd_mem()
would then double-free se_tmr_req.
Use the same helper, which returns just the tag, on this path too. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: elx: efct: Fix refcount leak in efct_hw_io_abort()
When efct_hw_reqtag_alloc() fails in efct_hw_io_abort(), the error path
returns -ENOSPC without releasing the reference obtained via
kref_get_unless_zero() earlier in the function. All other error paths
correctly drop the reference. This causes a permanent reference leak on the
io_to_abort object.
Additionally, the abort_in_progress flag is left set to true on this path,
which means future abort attempts for the same I/O will immediately return
-EINPROGRESS even though the abort was never submitted, effectively
blocking recovery.
Fix this by adding the missing kref_put() call and reset abort_in_progress
to false, matching the cleanup done in the efct_hw_wq_write() failure path
below. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: elx: efct: Fix I/O leak on unsupported additional CDB
efct_dispatch_fcp_cmd() allocates an efct_io before dispatching an
unsolicited FCP command. If the command has an unsupported additional
CDB, the function returns -EIO before handing the IO to the SCSI layer.
Free the allocated IO before returning from this error path. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: ims-pcu - fix use-after-free and double-free in disconnect
ims_pcu_disconnect() only intended to perform cleanup when the primary
(control) interface is unbound. However, it currently relies on the
interface class to distinguish between control and data interfaces.
A malicious device could present a data interface with the same class
as the control interface, leading to premature cleanup and potential
use-after-free or double-free.
Switch to verifying that the interface being disconnected is indeed
the control interface. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: ims-pcu - validate control endpoint type
The driver currently assumes that the first endpoint of the control
interface is an interrupt IN endpoint without verifying it. A malicious
device could provide a different endpoint type, which would then be
passed to usb_fill_int_urb(), potentially leading to kernel warnings
or undefined behavior.
Verify that the control endpoint is an interrupt IN endpoint. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: ims-pcu - fix firmware leak in async update
The firmware object was not being released if validation failed.
Use __free(firmware) to ensure the firmware is always released. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: ims-pcu - fix out-of-bounds read in ims_pcu_irq() debug logging
The debug logging in ims_pcu_irq() unconditionally prints data from
pcu->urb_in_buf. However, if the interrupt fired for pcu->urb_ctrl, the
actual data resides in pcu->urb_ctrl_buf. If urb->actual_length for the
control URB exceeds pcu->max_in_size, this leads to an out-of-bounds
read.
Fix this by printing from the correct buffer associated with the URB. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: ims-pcu - fix race condition in reset_device sysfs callback
The ims_pcu_reset_device() sysfs callback calls ims_pcu_execute_command()
without acquiring pcu->cmd_mutex. This can lead to data races and
corruption of the shared command buffer if triggered concurrently with
other commands.
Acquire pcu->cmd_mutex before calling ims_pcu_execute_command(). |
| In the Linux kernel, the following vulnerability has been resolved:
Input: ims-pcu - fix type confusion in CDC union descriptor parsing
The driver currently trusts the bMasterInterface0 from the CDC union
descriptor without verifying that it matches the interface being
probed. This could lead to the driver overwriting the private data of
another interface.
Validate that the control interface found in the descriptor is indeed
the one we are probing. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: vub300: fix use-after-free on probe failure
The vub300 driver lifetime-manages its controller state using
vub300->kref, with vub300_delete() freeing the mmc host when the last
reference is dropped. The probe error path after the inactivity timer has
been armed still bypasses that lifetime rule, however, and falls through
to mmc_free_host() directly if mmc_add_host() fails.
The race window is between arming the inactivity timer and reaching the
probe error unwind after mmc_add_host() fails:
probe thread timer/workqueue
------------ ---------------
kref_init(&vub300->kref) ref = 1
kref_get(&vub300->kref) ref = 2, timer ref
add_timer(inactivity_timer) fires after one second
|
| race window
|<---------------------------------------------------->
|
mmc_add_host(mmc)
inactivity timer fires
vub300_queue_dead_work()
kref_get() ref = 3
queue_work(deadwork)
mmc_add_host() fails
timer_delete_sync()
mmc_free_host(mmc)
frees vub300
deadwork runs
use-after-free
The inactivity timeout is one second, so this would require
mmc_add_host() to both fail and take more than one second to do so. This
is unlikely to happen in practice, but the error path is still wrong.
timer_delete_sync() only waits for the timer callback itself. It does
not flush deadwork that the callback may already have queued. As a
result, queued deadwork can still hold a kref while the probe error path
directly frees the backing mmc host, including the vub300 storage.
Fix this by using the same lifetime mechanism as disconnect. Clear
vub300->interface so that the timer callback and any queued deadwork
return early and drop their references, then drop the initial probe
reference and return without falling through to err_free_host. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: libertas_tf: fix use-after-free in lbtf_free_adapter()
lbtf_free_adapter() calls timer_delete(&priv->command_timer), which does
not wait for a running command_timer_fn() callback. lbtf_free_adapter()
runs on the teardown path right before ieee80211_free_hw() frees priv,
both in lbtf_remove_card() and in the probe error path. command_timer is
armed by mod_timer() in lbtf_cmd() whenever a firmware command is sent.
command_timer_fn() dereferences priv. If a command times out as the
device is removed, command_timer_fn() runs concurrently with teardown and
dereferences priv after it has been freed.
This is the same use-after-free that commit 03cc8f90d053 ("wifi: libertas:
fix use-after-free in lbs_free_adapter()") fixed in the sibling libertas
driver. The libertas_tf variant has the identical pattern and was left
unchanged. Use timer_delete_sync() so any in-flight callback completes
before priv is freed. |
| In the Linux kernel, the following vulnerability has been resolved:
posix-cpu-timers: Use u64 multiplication in update_rlimit_cpu()
update_rlimit_cpu() converts the RLIMIT_CPU value to nanoseconds with
u64 nsecs = rlim_new * NSEC_PER_SEC;
On 32-bit kernels both rlim_new (unsigned long) and NSEC_PER_SEC
(1000000000L) are 32-bit, so the multiplication is performed in unsigned
long and truncated for rlim_new > 4 seconds before being widened to u64.
The same file already casts to u64 for the matching computation in
check_process_timers():
u64 softns = (u64)soft * NSEC_PER_SEC;
As a result, the truncated value is installed into the CPUCLOCK_PROF
expiry cache (nextevt), causing the process CPU timer to be programmed
to fire prematurely for any RLIMIT_CPU soft limit >= 5 seconds. The
actual SIGXCPU/SIGKILL decision in check_process_timers() already casts
to u64 and is therefore correct, so limit enforcement is not broken;
only the expiry-cache programming is wrong. Apply the same cast here so
both paths convert rlim_cur identically.
64-bit kernels are unaffected. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: tegra: do not call pinctrl for GPIO direction
tegra_gpio_direction_input() and tegra_gpio_direction_output() already
program the GPIO controller direction registers directly. The additional
pinctrl_gpio_direction_input/output() calls do not add a Tegra pinctrl
operation, because the Tegra pinmux ops provide GPIO request/free
handling but no gpio_set_direction hook.
The extra call still enters the pinctrl core and takes pctldev->mutex.
Shared GPIO users can call the direction path while holding their
per-line spinlock, so this otherwise redundant pinctrl direction call can
sleep in an atomic context.
This was found by our static analysis tool and then confirmed by manual
review of tegra_gpio_probe(), the Tegra GPIO direction callbacks and the
Tegra pinctrl ops. The reviewed path has a default non-sleeping
struct gpio_chip while the direction callback still enters the pinctrl
mutex path.
A directed runtime validation kept the same non-sleeping chip registration
and drove:
gpio_shared_proxy_direction_output()
gpiod_direction_output_raw_commit()
tegra_gpio_direction_output()
pinctrl_gpio_direction_output()
Lockdep reported a sleep-in-atomic warning with the shared GPIO spinlock
held and pinctrl_get_device_gpio_range() plus tegra_gpio_direction_output()
on the stack.
Do not mark the whole chip as can_sleep to paper over this: can_sleep
describes whether get()/set() may sleep, and Tegra value access is MMIO.
Remove the redundant pinctrl direction calls and keep pinctrl involvement
in the existing request/free path. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: mt7621: avoid corruption of shared interrupt trigger state
The bank-shared fields like 'rising' and 'falling' are modified using
non-atomic read-modify-write operations. Since every gpio chip instance
represents an entire bank of 32 pins, if 'mediatek_gpio_irq_type()' is
called concurrently for different IRQs on the same bank a possible overwrite
of each other's configuration is possible. Thus, protect this state with
'gpio_generic_lock_irqsave' lock in the same way it is handled in irp_chip
'mediatek_gpio_irq_mask()' and 'mediatek_gpio_irq_unmask()' callbacks. |
