| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: fix memory leak in ieee80211_register_hw()
If kmemdup() fails while copying supported band structures, the error
path jumps to fail_rate. This skips rate_control_deinitialize() and
leaks the initialized local->rate_ctrl.
Fix this by adding a fail_band label that shares the rate-control cleanup
path before falling through to the remaining teardown.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still present in
v7.1-rc7.
An x86_64 allyesconfig build showed no new warnings. As we do not have a
suitable mac80211 device/driver combination to test with, no runtime
testing was able to be performed. |
| In the Linux kernel, the following vulnerability has been resolved:
pmdomain: imx: Fix i.MX8MP VC8000E power up sequence
Per errata[1]:
ERR050531: VPU_NOC power down handshake may hang during VC8000E/VPUMIX
power up/down cycling.
Description: VC8000E reset de-assertion edge and AXI clock may have a
timing issue.
Workaround: Set bit2 (vc8000e_clk_en) of BLK_CLK_EN_CSR to 0 to gate off
both AXI clock and VC8000E clock sent to VC8000E and AXI clock sent to
VPU_NOC m_v_2 interface during VC8000E power up(VC8000E reset is
de-asserted by HW)
Add a bool variable is_errata_err050531 in
'struct imx8m_blk_ctrl_domain_data' to represent whether the workaround
is needed. If is_errata_err050531 is true, first clear the clk before
powering up gpc, then enable the clk after powering up gpc.
[1] https://www.nxp.com/webapp/Download?colCode=IMX8MP_1P33A |
| In the Linux kernel, the following vulnerability has been resolved:
fs/resctrl: Fix double-add of pseudo-locked region's RMID to free list
A pseudo-locked group's RMID is freed when it is created. On unmount
rmdir_all_sub() unconditionally frees all RMID of all groups, resulting
in a double-free of the pseudo-locked group's RMID. The consequence of this
is that the original free results in the pseudo-locked group's RMID being
added to the rmid_free_lru linked list and the second free then attempts
to add the same RMID entry to the rmid_free_lru again.
Do not double-free a pseudo-locked group's RMID. |
| In the Linux kernel, the following vulnerability has been resolved:
cpu/hotplug: Fix NULL kobject warning in cpuhp_smt_enable()
On arm64, when booting with `maxcpus` greater than the number of present
CPUs (e.g., QEMU -smp cpus=4,maxcpus=8), some CPUs are marked as 'present'
but have not yet been registered via register_cpu(). Consequently,
the per-cpu device objects for these CPUs are not yet initialized.
In cpuhp_smt_enable(), the code iterates over all present CPUs. Calling
_cpu_up() for these unregistered CPUs eventually leads to
sysfs_create_group() being called with a NULL kobject (or a kobject
without a directory), triggering the following warning in
fs/sysfs/group.c:
WARNING: fs/sysfs/group.c:137 at internal_create_group+0x41c/0x4bc, CPU#2: sh/181
[...]
Call trace:
internal_create_group+0x41c/0x4bc (P)
sysfs_create_group+0x18/0x24
topology_add_dev+0x1c/0x28
cpuhp_invoke_callback+0x104/0x20c
__cpuhp_invoke_callback_range+0x94/0x11c
_cpu_up+0x200/0x37c
When booting with ACPI, arm64 smp_prepare_cpus() currently sets all
enumerated CPUs as "present" regardless of their status in the MADT. This
causes issues with SMT hotplug control. For instance, with QEMU's
"-smp 4,maxcpus=8" configuration, the MADT GICC entries are populated as
follows:
1. The first four CPUs: `Enabled` set but `Online Capable` not set.
2. The remaining four CPUs: `Online Capable` set but `Enabled` not set
to support potential hot-plugging.
Fix this by:
1. When booting with ACPI, checking the ACPI_MADT_ENABLED flag in the GICC
entry before calling set_cpu_present() during SMP initialization.
2. Properly managing the present mask in acpi_map_cpu() and
acpi_unmap_cpu() to support actual CPU hotplug events, This aligns with
other architectures like x86 and LoongArch.
3. Update the arm64 CPU hotplug documentation to no longer state that all
online-capable vCPUs are marked as present by the kernel at boot time.
This ensures that only physically available or explicitly enabled CPUs
are in the present mask, keeping the SMT control logic consistent with
the actual hardware state. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: atm: ueagle-atm: wait for pre-firmware load in .disconnect()
ueagle-atm uses the asynchronous request_firmware_nowait() in .probe(),
but does not wait for its completion, not even in .disconnect(); so, if the
device is unplugged meanwhile, its teardown runs concurrently with that.
Even though this inconsistency is worth addressing on its own, it has also
triggered several bug reports in syzbot over the years (some auto-closed)
where the firmware sysfs fallback mechanism (CONFIG_FW_LOADER_USER_HELPER)
creates a firmware subdirectory in the device directory during its removal,
which might hit unexpected conditions in kernfs, apparently, depending at
which point the add and remove operations raced. (See links.)
The pattern is:
usb ?-?: Direct firmware load for ueagle-atm/eagle?.fw failed with error -2
usb ?-?: Falling back to sysfs fallback for: ueagle-atm/eagle?.fw
<ERROR>
Call trace:
...
kernfs_create_dir_ns
sysfs_create_dir_ns
create_dir
kobject_add_internal
kobject_add_varg
kobject_add
class_dir_create_and_add
get_device_parent
device_add
fw_load_sysfs_fallback
fw_load_from_user_helper
firmware_fallback_sysfs
_request_firmware
request_firmware_work_func
...
(Some variations are observed, after fw_load_sysfs_fallback(), e.g., [1].)
While the kernfs side is being looked at, the ueagle-atm side can be fixed
by waiting for the pre-firmware load in the .disconnect() handler.
This change has a similar approach to previous work by Andrey Tsygunka [2]
(wait_for_completion() in .disconnect()), but it is relatively different in
design/implementation; using the Originally-by tag for credit assignment.
This has been tested with:
- synthetic reproducer to check the error path;
- USB gadget (virtual device) to check the firmware upload path;
- QEMU device emulator to check the device ID re-enumeration path;
(The latter two were written by Claude; no other code/text in this commit.)
Links (year first reported):
2025 https://syzbot.org/bug?extid=ce1e5a1b4e086b43e56d
2025 https://syzbot.org/bug?extid=9af8471255ac36e34fd4
2024 https://syzbot.org/bug?extid=306212936b13e520679d
2023 https://syzkaller.appspot.com/bug?extid=457452d30bcdda75ead2
2022 https://syzbot.org/bug?extid=782984d6f1701b526edb
2021 https://syzbot.org/bug?id=f3f221579f4ef7e9691281f3c6f56c05f83e8490
2021 https://syzbot.org/bug?id=84d86f0d71394829df6fc53daf6642c045983881
2021 https://syzbot.org/bug?id=3302dc1c0e2b9c94f2e8edb404eabc9267bc6f90
[1] https://syzkaller.appspot.com/bug?extid=457452d30bcdda75ead2
[2] https://lore.kernel.org/lkml/[email protected]/ |
| The ECS WordPress plugin before 4.3.8 does not check the post status or any capability when rendering an Elementor document requested through one of its AJAX actions, allowing unauthenticated users to retrieve the rendered content of unpublished (private, draft, pending) documents by supplying their identifier. |
| The ECS WordPress plugin before 4.3.8 does not perform capability or object-ownership checks on its Dynamic Repeater AJAX handlers (gated only by a capability-agnostic nonce that any edit_posts user obtains from the Elementor editor), so a Contributor can write a data-source binding into any post — including admin-authored pages — whose attacker-controlled values are rendered into a widget's repeater output without sanitization, executing JavaScript in the session of any visitor or administrator who views the page. |
| The Simply Schedule Appointments WordPress plugin before 1.6.12.17 does not restrict the user records returned by some of its REST endpoints to those the requester is entitled to see, allowing users with a low-privileged staff role to disclose the names and email addresses of arbitrary registered users. |
| The Product Feed PRO for WooCommerce by AdTribes WordPress plugin before 13.5.7 does not perform an authorization check on one of its REST read routes, allowing unauthenticated users to disclose a store's feed configuration (rules, filters and field mapping) and to enumerate the full product category taxonomy. |
| The ECS WordPress plugin before 4.3.8 does not have capability or ownership checks on its dynamic repeater actions, relying only on a nonce available to any user who can open the page builder, allowing users with a contributor-level account or above to read, alter and delete the binding configuration of posts they do not own and to change the ECS WordPress plugin before 4.3.8's site-wide presets. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/rockchip: inno-hdmi: Switch to drmm_kzalloc()
Driver makes use of drmm_encoder_init() to initialize the encoder and
automatically handle the cleanup by registering drm_encoder_cleanup()
with drmm_add_action().
However, the internal structure containing the encoder part gets
allocated with devm_kzalloc(), which happens while component_bind_all()
is being called from Rockchip DRM driver. The component framework
further ensures it is deallocated as part of releasing all the resources
claimed during bind, which is triggered from component_unbind_all().
When the reference to the DRM device gets eventually dropped via
drm_dev_put() in rockchip_drm_unbind(), drmm_encoder_alloc_release()
attempts to access the now released encoder structure, leading to
use-after-free.
Ensure driver's internal structure is still reachable on encoder cleanup
by switching from a device-managed allocation to a drm-managed one. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: atmel-sha204a - fix blocking and non-blocking rng logic
The blocking and non-blocking paths were failing to provide valid entropy
due to improper buffer management. Reading the buffer starting from byte 1,
only fetch the 32 bytes of random data from the return message.
Tested on an Atmel SHA204A device.
Before (here for blocking), tests showed repeatedly reading reduced bytes.
$ head -c 32 /dev/hwrng | hexdump -C
00000000 02 28 85 b3 47 40 f2 ee 00 00 00 00 00 00 00 00 |.(..G@..........|
00000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000020
After, the result will be similar to the following:
$ head -c 32 /dev/hwrng | hexdump -C
00000000 5a fc 3f 13 14 68 fe 06 68 0a bd 04 83 6e 09 69 |Z.?..h..h....n.i|
00000010 75 ff cf 87 10 84 3b c9 c1 df ae eb 45 53 4c c3 |u.....;.....ESL.|
00000020 |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid1,raid10: fix deadlock in read error recovery path
raid1d and raid10d may resubmit a split md cloned bio while handling
a read error. In this case, resubmitting the bio can lead to a deadlock
if the array is suspended before md_handle_request() acquires an
active_io reference via percpu_ref_tryget_live().
Since the cloned bio already holds an active_io reference,
trying to acquire another reference via percpu_ref_tryget_live()
can lead to a deadlock while the array is suspended.
Fix this by using percpu_ref_get() for md cloned bios. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: fix NULL deref in change_sta_links for unready link
_ieee80211_set_active_links() calls _ieee80211_link_use_channel() for
each newly-added link and WARN_ON_ONCE()s if it fails. The call uses
assign_on_failure=true, which allows mac80211 to continue despite
driver failures, but when a mac80211-level channel validation fails
(e.g., combinations check, DFS, or no available radio),
drv_assign_vif_chanctx() is never reached. Since ath12k_mac_vdev_create()
is only called from that path, arvif->is_created remains false and
arvif->ar remains NULL for the failed link.
The subsequent drv_change_sta_links() call reaches
ath12k_mac_op_change_sta_links(), which allocates an arsta and sets
ahsta->links_map |= BIT(link_id) for the broken link before checking
whether the link is ready. When the vdev was never created, only
station_add() is skipped, but the link remains in links_map.
Any subsequent operation iterating links_map and dereferencing arvif->ar
without a NULL check will crash. Two observed examples are NULL deref in
ath12k_mac_ml_station_remove() on disconnect and in ath12k_mac_op_set_key()
when wpa_supplicant installs PTK keys.
BUG: Unable to handle kernel NULL pointer dereference at 0x00000000
pc : ath12k_mac_station_post_remove+0x40/0xe8 [ath12k]
Call trace:
ath12k_mac_station_post_remove+0x40/0xe8 [ath12k]
ath12k_mac_op_sta_state+0xb60/0x1720 [ath12k]
drv_sta_state+0x100/0xbd8 [mac80211]
__sta_info_destroy_part2+0x148/0x178 [mac80211]
ieee80211_set_disassoc+0x500/0x678 [mac80211]
BUG: Unable to handle kernel NULL pointer dereference at 0x00000000
pc : ath12k_mac_op_set_key+0x1f8/0x2c0 [ath12k]
Call trace:
ath12k_mac_op_set_key+0x1f8/0x2c0 [ath12k]
drv_set_key+0x70/0x100 [mac80211]
ieee80211_key_enable_hw_accel+0x78/0x260 [mac80211]
ieee80211_add_key+0x16c/0x2ac [mac80211]
nl80211_new_key+0x138/0x280 [cfg80211]
Fix this by checking arvif->is_created before calling
ath12k_mac_alloc_assign_link_sta(). This prevents the broken link from
entering links_map, so all subsequent operations iterating the bitmap
are protected. The reliability of arvif->is_created across all error
paths is ensured by the preceding patch.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix NMI/tracepoint re-entry deadlock on lru locks
NMI and tracepoint BPF programs can re-enter the per-CPU or global
LRU lock that bpf_lru_pop_free()/push_free() already hold on the
same CPU, AA-deadlocking. Lockdep reports "inconsistent
{INITIAL USE} -> {IN-NMI}" on &l->lock (syzbot c69a0a2c816716f1e0d5)
and "possible recursive locking detected" on &loc_l->lock (syzbot
18b26edb69b2e19f3b33).
Prior trylock and rqspinlock based fixes (see links) were nacked
because compromised on reliability.
This patch converts every LRU lock site to rqspinlock_t and adds a
recovery path for some failure windows to avoid node leaks.
Failure recovery:
- *_pop_free top-level: return NULL; prealloc_lru_pop() already
treats that as no-free-element (-ENOMEM).
- Cross-CPU steal: skip the victim's locked loc_l, try next CPU.
- Post-steal local lock fail: publish stolen node to lockless
per-CPU free_llist; next pop on this CPU picks it up.
- push_free fail: mark node pending_free=1. __local_list_flush(),
__local_list_pop_pending() reclaim the node from pending_list.
__bpf_lru_list_shrink_inactive() reclaims the node from inactive
list. Nodes from active list are reclaimed by __bpf_lru_list_shrink()
or after __bpf_lru_list_rotate_active() demotes it to the inactive. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware_loader: Fix recursive lock in device_cache_fw_images()
A recursive locking deadlock can occur in the firmware loader's power
management notification handler.
During system suspend or hibernation preparation, fw_pm_notify() calls
device_cache_fw_images(). This function acquires fw_lock to set the
firmware cache state to FW_LOADER_START_CACHE and then iterates over all
devices using dpm_for_each_dev() while still holding the lock.
For each device, dev_cache_fw_image() schedules asynchronous work to cache
the firmware. If memory allocation for the async work entry fails (e.g., in
out-of-memory conditions), async_schedule_node_domain() falls back to
executing the work function synchronously in the current thread.
The synchronous execution path (__async_dev_cache_fw_image() ->
cache_firmware() -> request_firmware() -> assign_fw()) attempts to acquire
fw_lock again. Since the current thread already holds fw_lock, this results
in a recursive locking deadlock.
Fix this by releasing fw_lock immediately after updating the cache state
and before calling dpm_for_each_dev(). The lock is only needed to protect
the state update. Concurrent firmware requests will correctly see the
FW_LOADER_START_CACHE state and use the piggyback mechanism, which is
independently protected by its own fwc->name_lock. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_flow: Dont expose folded kernel pointers
The flow classifier falls back to addr_fold() for fields that are missing
from packet headers. In map mode, userspace controls mask, xor, rshift,
addend and divisor, and can observe the resulting classid through class
statistics. This allows a tc classifier in a user/network namespace to
recover the 32-bit folded value of skb->sk, skb_dst() or skb_nfct().
Align with standard kernel practices for pointer hashing and replace the
XOR folding with a keyed siphash (which is cryptographically secure) |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/bnxt_re: Avoid displaying the kernel pointer
While dumping the info on MR using the rdma tool, we
dump the mr_hwq which is a kernel pointer. There is
no need to expose this value for end user. So avoid
it. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: most: video: avoid double free on video register failure
comp_register_videodev() allocates a video_device with
video_device_alloc() and releases it if video_register_device() fails.
This can double free the video_device when __video_register_device()
reaches device_register() and that call fails:
video_register_device()
-> __video_register_device()
-> device_register() fails
-> put_device(&vdev->dev)
-> v4l2_device_release()
-> vdev->release(vdev)
-> video_device_release(vdev)
comp_register_videodev()
-> video_device_release(mdev->vdev)
Use video_device_release_empty() while registering the device so that
registration failure paths do not free mdev->vdev through vdev->release().
comp_register_videodev() then releases mdev->vdev exactly once on failure.
Restore video_device_release() after successful registration so the
registered device keeps its normal lifetime handling.
This issue was found by a static analysis tool I am developing. |
| In the Linux kernel, the following vulnerability has been resolved:
xprtrdma: Check frwr_wp_create() during connect
frwr_wp_create() creates the singleton Memory Region used to encode
padding for Write chunks whose payload length is not XDR-aligned. Its
failure paths return a negative errno and leave ep->re_write_pad_mr set
to NULL.
rpcrdma_xprt_connect() currently ignores that return value. If
frwr_wp_create() fails after the rest of the connection setup succeeds,
xprt_rdma_connect_worker() treats the connection attempt as successful
and sets XPRT_CONNECTED. A later NFS/RDMA read with a non-4-byte-aligned
receive page length reaches rpcrdma_encode_write_list(), passes the NULL
write-pad MR to encode_rdma_segment(), and dereferences it.
This is locally triggerable on an NFS/RDMA client after a connect or
reconnect hits a local MR allocation, DMA-map, MR-map, or post-send
failure; a remote peer alone cannot force the local MR setup failure.
Check the return value and fail the connect as -ENOTCONN, matching the
adjacent setup failures. This keeps XPRT_CONNECTED clear and lets the
normal reconnect path retry. |
