| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/guc: Fix buffer overflow in steered register list allocation
The size calculation for the steered register extarray uses only the
geometry DSS mask (g_dss_mask) to determine the number of entries to
allocate:
total = bitmap_weight(gt->fuse_topo.g_dss_mask, ...) * steer_reg_num;
However, the filling loop uses for_each_dss_steering(), which iterates
over for_each_dss(), defined as the union of g_dss_mask and c_dss_mask
(geometry + compute DSS). On platforms with compute-only DSS bits, the
loop writes past the allocated buffer, corrupting adjacent slab objects.
This manifests as list_del corruption and SLUB redzone overwrites during
drm_managed_release on device unbind, since the overflow corrupts the
drmres list_head of neighboring allocations.
Fix by computing the allocation size using the union of both DSS masks,
matching the iteration pattern of for_each_dss_steering().
--
v2:
- use bitmap_weighted_or() (Zhanjun)
(cherry picked from commit 0a78a44f4901aa6c9263e66be7fce02282f1109f) |
| In the Linux kernel, the following vulnerability has been resolved:
net/af_iucv: fix NULL deref in afiucv_hs_callback_syn()
afiucv_hs_callback_syn() allocates the child socket with GFP_ATOMIC.
If the allocation fails, nsk is NULL.
The connection-refused path is entered when the listen state check
fails, the accept backlog is full, or nsk is NULL. The code
unconditionally calls iucv_sock_kill(nsk) in that path.
iucv_sock_kill() does not accept a NULL socket pointer and immediately
dereferences sk via sock_flag(sk, SOCK_ZAPPED). When nsk is NULL,
calling iucv_sock_kill(nsk) results in a NULL pointer dereference.
Only call iucv_sock_kill() when a child socket was successfully
allocated. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: reject out-of-range ptype in ice_parser_profile_init
set_bit(rslt->ptype, prof->ptypes) operates on a DECLARE_BITMAP of
ICE_FLOW_PTYPE_MAX (1024) bits. Nothing prevents a malicious VF from
providing ptype >= 1024 through VIRTCHNL, resulting in a write past
the end of the bitmap and a kernel page fault.
Reproduced with a custom kernel module injecting a crafted
VIRTCHNL_OP_ADD_RSS_CFG on E810-C QSFP (8086:1592),
FW 4.91 0x800214af 1.3909.0, ICE COMMS DDP 1.3.53.0,
kernel 7.1.0-rc1.
crash_parser: ice_parser_profile_init @ ffffffffc0d61b60
crash_parser: setting ptype=0xffff (max valid=1023)
crash_parser: calling ice_parser_profile_init -- expect OOB crash!
BUG: kernel NULL pointer dereference, address: 0000000000000000
Oops: Oops: 0002 [#1] SMP NOPTI
CPU: 56 UID: 0 PID: 165011 Comm: insmod Kdump: loaded Tainted: G S U OE 7.1.0-rc1 #1
Hardware name: Intel Corporation S2600BPB/S2600BPB
RIP: 0010:ice_parser_profile_init+0x2d/0x1d0 [ice]
Call Trace:
<TASK>
? __pfx_ice_parser_profile_init+0x10/0x10 [ice]
crash_init+0x127/0xff0 [crash_parser]
do_one_initcall+0x45/0x310
do_init_module+0x64/0x270
init_module_from_file+0xcc/0xf0
idempotent_init_module+0x17b/0x280
__x64_sys_finit_module+0x6e/0xe0
Bail out early with -EINVAL when ptype is out of range. |
| In modem, there is a possible information disclosure due to missing filtering of sensitive data in crash dumps. This could lead to local information disclosure with no additional execution privileges needed. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmfmac: drain bus_reset work on device removal
brcmf_fw_crashed() and the debugfs "reset" entry both schedule
drvr->bus_reset, whose callback recovers drvr through container_of()
and dereferences it. The removal path frees drvr (brcmf_free ->
wiphy_free) without draining the work, so a bus_reset callback pending
or running during removal can outlive drvr.
Cancellation cannot live in brcmf_detach() or brcmf_free(): the work
callback reaches teardown through the bus .reset op (PCIe
brcmf_pcie_reset -> brcmf_detach; SDIO brcmf_sdio_bus_reset ->
brcmf_sdiod_remove -> brcmf_free), so cancelling there would wait for
the running work and deadlock.
Add a per-bus mutex (bus_reset_lock) and route all arming through
brcmf_bus_schedule_reset(), which under the lock skips when the bus is
marked removing. Each bus remove entry calls
brcmf_bus_cancel_reset_work(), which under the same lock sets removing
and cancels the work. Holding the mutex across cancel_work_sync() makes
the set-removing + drain step atomic. Every producer reaches the arming
path from process context -- the PCIe firmware-halt notification runs in
the threaded IRQ handler (brcmf_pcie_isr_thread) and the SDIO hostmail
path runs from the data workqueue -- so the mutex is taken only in
sleepable contexts. Where applicable the remove entry first stops the
firmware-crash producer: on PCIe mask the mailbox and synchronize_irq;
on SDIO unregister the bus interrupt and cancel the data worker, which
also reports firmware halts through brcmf_fw_crashed(). The mutex is
initialized at bus allocation. The SDIO suspend power-off path frees
drvr through the same brcmf_sdiod_remove() and takes the same lock;
resume re-allows the work only on a successful re-probe.
Also guard brcmf_fw_crashed() against a NULL bus_if/drvr: it can fire
before brcmf_attach() wires up drvr, and it dereferences drvr
(bphy_err/brcmf_dev_coredump) before reaching the arming gate.
The bus_reset work is shared across buses, so the drain is applied to
every remove path: PCIe (the .reset op introduced by the Fixes commit),
SDIO (arms the same work through brcmf_fw_crashed()), and USB (via the
debugfs "reset" entry). cancel_work_sync() drains a running or pending
bus_reset work item before removal frees drvr, and patch 1/2 makes the
scratch-buffer release safe when reset teardown has already released
those DMA buffers.
This patch fixes the lifetime of the bus_reset work item itself. It does
not attempt to address the separate, pre-existing lifetime of the
asynchronous firmware completion started by the PCIe reset path. That
callback needs its own lifetime/ownership protocol and is being tracked
separately.
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: reject free space cache with more entries than pages
When loading a v1 free space cache, __load_free_space_cache() takes
num_entries and num_bitmaps straight from the on-disk
btrfs_free_space_header. That header is stored in the tree_root under a key
with type 0, which the tree-checker has no case for, so neither count is
validated before the load trusts it.
The load loops num_entries times and maps the next page whenever the current
one runs out, going through io_ctl_check_crc() -> io_ctl_map_page(), which
does io_ctl->pages[io_ctl->index++]. But pages[] is allocated in
io_ctl_init() from the cache inode's i_size, not from num_entries:
num_pages = DIV_ROUND_UP(i_size_read(inode), PAGE_SIZE);
io_ctl->pages = kcalloc(num_pages, sizeof(struct page *), GFP_NOFS);
So if num_entries claims more records than the pages can hold, io_ctl->index
runs off the end of pages[]. The write side never hits this because
io_ctl_add_entry() and io_ctl_add_bitmap() both stop once
io_ctl->index >= io_ctl->num_pages; the read side just never had the same
check.
To trigger it, take a clean cache (num_entries = <N> here), set num_entries
in the header to 0x10000, and fix up the leaf checksum so it still passes
the tree-checker. The cache inode has i_size = 65536, so num_pages is 16 and
pages[] is a 16-pointer (kmalloc-128) array. The load now tries to read
65536 entries, io_ctl->index walks up to 16, and pages[16] is read past the
array:
BUG: KASAN: slab-out-of-bounds in io_ctl_check_crc (fs/btrfs/free-space-cache.c:420 fs/btrfs/free-space-cache.c:565)
Read of size 8 at addr ffff88800c833a80 by task kworker/u8:3/58
io_ctl_check_crc (fs/btrfs/free-space-cache.c:420 fs/btrfs/free-space-cache.c:565)
__load_free_space_cache (fs/btrfs/free-space-cache.c:655 fs/btrfs/free-space-cache.c:820)
load_free_space_cache (fs/btrfs/free-space-cache.c:1017)
caching_thread (fs/btrfs/block-group.c:880)
btrfs_work_helper (fs/btrfs/async-thread.c:312)
process_one_work
worker_thread
kthread
ret_from_fork
free-space-cache.c:420 is io_ctl_map_page(), inlined into io_ctl_check_crc()
at line 565, which is why that is the frame KASAN names. The out-of-bounds
slot is then treated as a struct page and handed to crc32c(), so the bad
read turns into a GP fault.
Add the missing check to io_ctl_check_crc(), which is where both the entry
loop and the bitmap loop end up. When num_entries is too large the load now
fails like any corrupt cache: __load_free_space_cache() drops it and rebuilds
the free space from the extent tree, so a valid cache is never rejected. |
| In the Linux kernel, the following vulnerability has been resolved:
net, bpf: check master for NULL in xdp_master_redirect()
xdp_master_redirect() dereferences the result of
netdev_master_upper_dev_get_rcu() without a NULL check, but that helper
returns NULL when the receiving device has no upper-master adjacency.
The reach guard only checks netif_is_bond_slave(). On bond slave release
bond_upper_dev_unlink() drops the upper-master adjacency before clearing
IFF_SLAVE, so an XDP_TX reaching xdp_master_redirect() in that window
still passes netif_is_bond_slave() while master is already NULL, and
faults on master->flags at offset 0xb0:
BUG: kernel NULL pointer dereference, address: 00000000000000b0
RIP: 0010:xdp_master_redirect (net/core/filter.c:4432)
Call Trace:
xdp_master_redirect (net/core/filter.c:4432)
bpf_prog_run_generic_xdp (include/net/xdp.h:700)
do_xdp_generic (net/core/dev.c:5608)
__netif_receive_skb_one_core (net/core/dev.c:6204)
process_backlog (net/core/dev.c:6319)
__napi_poll (net/core/dev.c:7729)
net_rx_action (net/core/dev.c:7792)
handle_softirqs (kernel/softirq.c:622)
__dev_queue_xmit (include/linux/bottom_half.h:33)
packet_sendmsg (net/packet/af_packet.c:3082)
__sys_sendto (net/socket.c:2252)
Kernel panic - not syncing: Fatal exception in interrupt
The missing check dates back to the original code; commit 1921f91298d1
("net, bpf: fix null-ptr-deref in xdp_master_redirect() for down master")
later added the master->flags read where the fault now lands but kept the
unconditional deref. Check master for NULL before use; a NULL master is
treated the same as one that is not up. |
| In the Linux kernel, the following vulnerability has been resolved:
usbnet: gl620a: fix out-of-bounds read in genelink_rx_fixup()
genelink_rx_fixup() splits an aggregated RX frame into its individual
packets, using a per-packet length taken from device-supplied data. That
length is only bounded by GL_MAX_PACKET_LEN (1514); it is never compared
against how many bytes were actually received.
A malicious GeneLink (GL620A) device can therefore send a short URB whose
header claims packet_count > 1 and a first packet of up to 1514 bytes.
skb_put_data(gl_skb, packet->packet_data, size);
then copies past the end of the receive buffer and hands the adjacent slab
contents up the network stack, an out-of-bounds read that leaks kernel heap.
No privilege is required: the path runs in the usbnet RX softirq as soon as
the interface is up.
BUG: KASAN: slab-out-of-bounds in genelink_rx_fixup (drivers/net/usb/gl620a.c:112)
Read of size 1514 at addr ffff888011309708 by task ksoftirqd/0/14
Call Trace:
...
__asan_memcpy (mm/kasan/shadow.c:105)
genelink_rx_fixup (include/linux/skbuff.h:2814 drivers/net/usb/gl620a.c:112)
usbnet_bh (drivers/net/usb/usbnet.c:572 drivers/net/usb/usbnet.c:1589)
process_one_work (kernel/workqueue.c:3322)
bh_worker (kernel/workqueue.c:3405)
tasklet_action (kernel/softirq.c:965)
handle_softirqs (kernel/softirq.c:622)
run_ksoftirqd (kernel/softirq.c:1076)
...
skb_pull() already verifies that the requested length fits the buffer and
returns NULL otherwise. Move it ahead of the copy and check its result, so
a packet that overruns the received data is rejected before it is read.
Well-formed frames, whose packets are fully present, are unaffected. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix OOB reads in is_ap_in_tkip() IE loop
The loop in is_ap_in_tkip() iterates over IEs without verifying that
enough bytes remain before dereferencing the IE header or its payload:
- pIE->element_id and pIE->length are read without checking that
i + sizeof(*pIE) <= ie_length, so a truncated IE at the end of the
buffer causes an OOB read.
- For WLAN_EID_VENDOR_SPECIFIC the code compares pIE->data + 12,
which requires pIE->length >= 16. For WLAN_EID_RSN it compares
pIE->data + 8, requiring pIE->length >= 12. Neither requirement
is checked.
Add the missing IE header and payload bounds checks and guard each
data access with an explicit pIE->length minimum, matching the
pattern established in update_beacon_info(). |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: validate lcns_follow in log_replay conversion
log_replay() converts DIR_PAGE_ENTRY_32 records into DIR_PAGE_ENTRY
records when replaying version 0 restart tables.
During this conversion, the memmove() length is derived directly from
the on-disk lcns_follow field:
memmove(&dp->vcn, &dp0->vcn_low,
2 * sizeof(u64) +
le32_to_cpu(dp->lcns_follow) * sizeof(u64));
check_rstbl() validates restart table structure, but does not constrain
per-entry lcns_follow values relative to the entry size. A malformed
filesystem image can provide an oversized lcns_follow value, causing
the conversion memmove() to access memory beyond the bounds of the
allocated restart table buffer.
The same field is later used to bound iteration over page_lcns[],
so validating lcns_follow during conversion also prevents downstream
out-of-bounds access from the same malformed metadata.
Compute the maximum valid lcns_follow from the already-validated
restart table entry size and reject entries that exceed this bound.
Reuse the existing t16/t32 scratch variables already declared in
log_replay() to avoid introducing new declarations.
[[email protected]: fixed the conflicts] |
| In the Linux kernel, the following vulnerability has been resolved:
vfio/pci: Release the VGA arbiter client on register_device() failure
The re-order in the Fixes commit below displaced vfio_pci_vga_init() as
the last failure point of what is now vfio_pci_core_register_device()
without introducing an unwind for the VGA arbiter registration.
In current kernels this is mostly benign because vfio_pci_set_decode()
only uses pci_dev state, but the original failure path could leave a
callback with a freed vdev cookie. The stale registration also becomes
unsafe again once the callback follows drvdata to the vfio device.
Add the required VGA unwind callout. |
| In the Linux kernel, the following vulnerability has been resolved:
hwrng: virtio: clamp device-reported used.len at copy_data()
random_recv_done() stores the device-reported used.len directly into
vi->data_avail. copy_data() then indexes vi->data[] using
vi->data_idx (advanced by previous copy_data() calls) and issues a
memcpy() without re-validating either value against the posted
buffer size sizeof(vi->data) (SMP_CACHE_BYTES bytes, typically 32
or 64).
A malicious or buggy virtio-rng backend can set used.len beyond
sizeof(vi->data), steering the memcpy() past the end of the inline
array into adjacent kmalloc-1k slab bytes. hwrng_fillfn() mixes
those bytes into the guest RNG, and guest root can also observe
them directly via /dev/hwrng.
Concrete impact is inside the guest:
- Memory-safety / hardening: any virtio-rng backend that
over-reports used.len causes the driver to read past vi->data
into unrelated slab contents. hwrng_fillfn() is a kernel thread
that runs as soon as the device is probed; no guest userspace
interaction is required to first-trigger the OOB.
- Cross-boundary leak (confidential-compute threat model): a
malicious hypervisor cooperating with a malicious or compromised
guest root userspace can use /dev/hwrng as a leak channel for
guest-kernel heap data. The host sets a large used.len, guest
root reads /dev/hwrng, and the returned bytes contain guest
kernel slab contents that were adjacent to vi->data. In
practice, confidential-compute guests (SEV-SNP, TDX) usually
disable virtio-rng entirely, so this path is narrow, but the
fix is still worth carrying because the underlying
memory-safety bug contaminates the guest RNG on any host.
KASAN confirms the OOB on a 7.1-rc4 guest whose virtio-rng backend
has been patched to report used.len = 0x10000:
BUG: KASAN: slab-out-of-bounds in virtio_read+0x394/0x5d0
Read of size 64 at addr ffff88800ae0ba20 by task hwrng/52
Call Trace:
__asan_memcpy+0x23/0x60
virtio_read+0x394/0x5d0
hwrng_fillfn+0xb2/0x470
kthread+0x2cc/0x3a0
Allocated by task 1:
probe_common+0xa5/0x660
virtio_dev_probe+0x549/0xbc0
The buggy address belongs to the object at ffff88800ae0b800
which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 0 bytes to the right of
allocated 544-byte region [ffff88800ae0b800, ffff88800ae0ba20)
Same class of bug as commit c04db81cd028 ("net/9p: Fix buffer
overflow in USB transport layer"), which hardened
usb9pfs_rx_complete() against unchecked device-reported length in
the USB 9p transport.
With the clamp at point of use and array_index_nospec() in place,
the same harness boots cleanly: copy_data() returns zero for the
bogus report, the device-supplied bytes after data_idx are
discarded, and the driver issues a fresh request. |
| In the Linux kernel, the following vulnerability has been resolved:
6lowpan: fix NHC entry use-after-free on error path
lowpan_nhc_do_uncompression() looks up an NHC descriptor while holding
lowpan_nhc_lock. If the descriptor has no uncompress callback, the error
path drops the lock before printing nhc->name.
lowpan_nhc_del() removes descriptors under the same lock and then relies
on synchronize_net() before the owning module can be unloaded. That only
waits for net RX RCU readers. lowpan_header_decompress() is also exported
and can be reached from callers that are not necessarily covered by the net
core RX critical section, for example the Bluetooth 6LoWPAN L2CAP receive
path.
This leaves a race where one task drops lowpan_nhc_lock in the error path,
another task unregisters and frees the matching descriptor after
synchronize_net() returns, and the first task then dereferences nhc->name
for the warning.
With the post-unlock window widened, KASAN reports:
BUG: KASAN: slab-use-after-free in lowpan_nhc_do_uncompression+0x1f4/0x220
Read of size 8
lowpan_nhc_do_uncompression
lowpan_header_decompress
Fix this by printing the warning before dropping lowpan_nhc_lock, so the
descriptor name is read while unregister is still excluded. The malformed
packet is still rejected with -ENOTSUPP. |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: fix out-of-bounds read in broadcast Gap ACK blocks
A broadcast PROTOCOL/STATE_MSG can carry a Gap ACK blocks record in its
data area. tipc_get_gap_ack_blks() only verifies that the record's len
field is self-consistent with its ugack_cnt/bgack_cnt counts
(sz == struct_size(p, gacks, ugack_cnt + bgack_cnt)); it does not check
that the record actually fits in the message data area, msg_data_sz().
The unicast caller tipc_link_proto_rcv() bounds it ("if (glen > dlen)
break;"), but the broadcast caller tipc_bcast_sync_rcv() discards the
returned size, so tipc_link_advance_transmq() copies the record off the
receive skb with an attacker-controlled count:
this_ga = kmemdup(ga, struct_size(ga, gacks, ga->bgack_cnt),
GFP_ATOMIC);
A TIPC neighbour that negotiated TIPC_GAP_ACK_BLOCK triggers it with one
ordinary broadcast STATE_MSG (msg_bc_ack_invalid() clear), sized so its
data area is short, carrying a Gap ACK record with len = 0x400,
bgack_cnt = 0xff and ugack_cnt = 0. len then equals
struct_size(p, gacks, 255), so the consistency check passes and ga is
non-NULL; kmemdup() reads struct_size(ga, gacks, 255) = 1024 bytes out
of the much smaller skb:
BUG: KASAN: slab-out-of-bounds in kmemdup_noprof+0x48/0x60
Read of size 1024 at addr ffff0000c7030d38 by task poc864/69
Call trace:
kmemdup_noprof+0x48/0x60
tipc_link_advance_transmq+0x86c/0xb80
tipc_link_bc_ack_rcv+0x19c/0x1e0
tipc_bcast_sync_rcv+0x1c4/0x2c4
tipc_rcv+0x85c/0x1340
tipc_l2_rcv_msg+0xac/0x104
The buggy address belongs to the object at ffff0000c7030d00
which belongs to the cache skbuff_small_head of size 704
The buggy address is located 56 bytes inside of
allocated 704-byte region [ffff0000c7030d00, ffff0000c7030fc0)
The copied-out bytes are subsequently consumed as gap/ack values, but
the read is already out of bounds at the kmemdup() regardless of how
they are used.
The unicast STATE path drops such a message: "if (glen > dlen) break;"
skips the rest of STATE_MSG handling and the skb is freed. Make the
broadcast path drop it too. tipc_bcast_sync_rcv() now bounds the record
against msg_data_sz() and, when it does not fit, reports it back through
tipc_node_bc_sync_rcv() to tipc_rcv() so the skb is discarded rather than
processed. ga is not cleared on this path: ga == NULL already means
"legacy peer without Selective ACK", a distinct legitimate state. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: restrict implied bcc[0] exemption to responses without data area
smb2_check_message() has a long-standing quirk that accepts a response
whose calculated length is one byte larger than the bytes actually
received ("server can return one byte more due to implied bcc[0]").
This was introduced to accommodate servers that omit the trailing bcc[0]
overlap byte when no data area is present.
However, the exemption is applied unconditionally, regardless of whether
the command actually carries a data area (has_smb2_data_area[]). When a
response with a data area is subject to the +1 exemption, the reported
data can extend one byte beyond the bytes actually received, yet
smb2_check_message() still accepts it. The subsequent decoder then reads
past the end of the receive buffer. This is reachable during NEGOTIATE
and SESSION_SETUP, before the session is established.
The resulting out-of-bounds reads are visible under KASAN when mounting
against a non-conforming server; both the SPNEGO/negTokenInit and the
NTLMSSP challenge decoders are affected:
BUG: KASAN: slab-out-of-bounds in asn1_ber_decoder+0x16a7/0x1b00
Read of size 1 at addr ffff8880084d67c0 by task mount.cifs/81
CPU: 1 UID: 0 PID: 81 Comm: mount.cifs Not tainted 7.1.0-rc6 #1
Call Trace:
<TASK>
dump_stack_lvl+0x4e/0x70
print_report+0x157/0x4c9
kasan_report+0xce/0x100
asn1_ber_decoder+0x16a7/0x1b00
decode_negTokenInit+0x19/0x30
SMB2_negotiate+0x31d9/0x4c90
cifs_negotiate_protocol+0x1f2/0x3f0
cifs_get_smb_ses+0x93f/0x17e0
cifs_mount_get_session+0x7f/0x3a0
cifs_mount+0xb4/0xcf0
cifs_smb3_do_mount+0x23a/0x1500
smb3_get_tree+0x3b0/0x630
vfs_get_tree+0x82/0x2d0
fc_mount+0x10/0x1b0
path_mount+0x50d/0x1de0
__x64_sys_mount+0x20b/0x270
do_syscall_64+0xee/0x590
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
Allocated by task 85:
kmem_cache_alloc_noprof+0x106/0x380
mempool_alloc_noprof+0x116/0x1e0
cifs_small_buf_get+0x31/0x80
allocate_buffers+0x10d/0x2b0
cifs_demultiplex_thread+0x1d5/0x1d50
kthread+0x2c6/0x390
ret_from_fork+0x36e/0x5a0
ret_from_fork_asm+0x1a/0x30
The buggy address is located 0 bytes to the right of
allocated 448-byte region [ffff8880084d6600, ffff8880084d67c0)
which belongs to the cache cifs_small_rq of size 448
BUG: KASAN: slab-out-of-bounds in kmemdup_noprof+0x36/0x50
Read of size 329 at addr ffff88800726c678 by task mount.cifs/89
CPU: 0 UID: 0 PID: 89 Comm: mount.cifs Tainted: G B 7.1.0-rc6 #1
Call Trace:
<TASK>
dump_stack_lvl+0x4e/0x70
print_report+0x157/0x4c9
kasan_report+0xce/0x100
kasan_check_range+0x10f/0x1e0
__asan_memcpy+0x23/0x60
kmemdup_noprof+0x36/0x50
decode_ntlmssp_challenge+0x457/0x680
SMB2_sess_auth_rawntlmssp_negotiate+0x6f0/0xcb0
SMB2_sess_setup+0x219/0x4f0
cifs_setup_session+0x248/0xaf0
cifs_get_smb_ses+0xf79/0x17e0
cifs_mount_get_session+0x7f/0x3a0
cifs_mount+0xb4/0xcf0
cifs_smb3_do_mount+0x23a/0x1500
smb3_get_tree+0x3b0/0x630
vfs_get_tree+0x82/0x2d0
fc_mount+0x10/0x1b0
path_mount+0x50d/0x1de0
__x64_sys_mount+0x20b/0x270
do_syscall_64+0xee/0x590
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
Allocated by task 93:
kmem_cache_alloc_noprof+0x106/0x380
mempool_alloc_noprof+0x116/0x1e0
cifs_small_buf_get+0x31/0x80
allocate_buffers+0x10d/0x2b0
cifs_demultiplex_thread+0x1d5/0x1d50
kthread+0x2c6/0x390
ret_from_fork+0x36e/0x5a0
ret_from_fork_asm+0x1a/0x30
The buggy address is located 120 bytes inside of
allocated 448-byte region [ffff88800726c600, ffff88800726c7c0)
which belongs to the cache cifs_small_rq of size 448
Restrict the +1 exemption to responses that have no data area, so that
it still covers the bcc[0] omission it was meant for. When a data area
is present, the +1 discrepancy instead means the reported data length
overruns the
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix WEP length underflow and OOB read in OnAuth()
OnAuth() has two bugs in the shared-key authentication path.
When the Privacy bit is set, rtw_wep_decrypt() is called without
verifying that the frame is long enough to contain a valid WEP IV and
ICV. Inside rtw_wep_decrypt(), length is computed as:
length = len - WLAN_HDR_A3_LEN - iv_len
and then passed as (length - 4) to crc32_le(). If len is less than
WLAN_HDR_A3_LEN + iv_len + icv_len (32 bytes), length - 4 is negative
and, after the implicit cast to size_t, causes crc32_le() to read far
beyond the frame buffer. Add a minimum length check before accessing
the IV field and calling the decryption path.
When processing a seq=3 response, rtw_get_ie() stores the Challenge
Text IE length in ie_len, but the subsequent memcmp() always reads 128
bytes regardless of ie_len. IEEE 802.11 mandates a challenge text of
exactly 128 bytes; reject any IE whose length field differs, matching
the check already applied to OnAuthClient(). |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix OOB read in update_beacon_info() IE loop
The IE parsing loop in update_beacon_info() advances by
(pIE->length + 2) each iteration but only guards on i < len.
When a malicious AP sends a Beacon whose last IE has only one byte
remaining in the frame (the element_id byte lands at len-1), the loop
reads pIE->length from one byte past the allocated receive buffer.
Additionally, even when the header bytes are in bounds, pIE->length
itself can extend the data window beyond len, passing a truncated IE
to the handler functions.
Add two guards at the top of the loop body:
1. Break if fewer than sizeof(*pIE) bytes remain (can't read header).
2. Break if the IE's declared data extends past len.
Also replace i += (pIE->length + 2) with i += sizeof(*pIE) + pIE->length
for consistency with the sizeof(*pIE) guards added above. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix OOB reads in IE loops in issue_assocreq() and join_cmd_hdl()
Two IE parsing loops are missing the header bounds checks before they
dereference pIE->length:
- issue_assocreq() walks pmlmeinfo->network.ies to build the
association request. If the stored IE data ends with only an
element_id byte and no length byte, pIE->length is read one byte
past the end of the buffer.
- join_cmd_hdl() walks pnetwork->ies during station join and has
the same problem under the same conditions.
Both buffers are filled from AP beacon and probe-response frames, so a
malicious AP that sends a truncated final IE can trigger the issue.
Apply the two-guard pattern established in update_beacon_info():
1. Break if fewer than sizeof(*pIE) bytes remain.
2. Break if the IE's declared data extends past the buffer end. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix OOB reads in rtw_get_sec_ie(), rtw_get_wapi_ie(), and rtw_get_wps_attr()
Three IE/attribute parsing functions have missing bounds checks.
rtw_get_sec_ie() and rtw_get_wapi_ie() iterate over a raw IE buffer
without verifying that the header bytes (tag + length) are within the
remaining buffer before reading them. Additionally, rtw_get_sec_ie()
compares the 4-byte WPA OUI at cnt+2 without checking that at least
6 bytes remain, and rtw_get_wapi_ie() compares a 4-byte WAPI OUI at
cnt+6 without checking that at least 10 bytes remain.
rtw_get_wps_attr() reads wps_ie[0] and wps_ie+2 unconditionally at
entry, before verifying that wps_ielen is large enough to contain
the 6-byte WPS IE header (element_id + length + 4-byte OUI). Inside
the attribute loop, get_unaligned_be16() is called on attr_ptr and
attr_ptr+2 without checking that 4 bytes remain in the buffer.
Add a cnt+2 bounds check before each loop body in rtw_get_sec_ie()
and rtw_get_wapi_ie(), guard each multi-byte comparison with a minimum
IE length requirement, add a wps_ielen < 6 early return in
rtw_get_wps_attr(), and add a 4-byte bounds check in its inner loop. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix OOB write in HT_caps_handler()
HT_caps_handler() iterates pIE->length bytes and writes into
HT_caps.u.HT_cap[], which is a fixed 26-byte array (sizeof struct
HT_caps_element). Because pIE->length is a raw u8 from an over-the-air
802.11 AssocResponse frame and is never validated, a malicious AP can
set it up to 255, causing up to 229 bytes of out-of-bounds writes into
adjacent fields of struct mlme_ext_info.
Truncate the iteration count to the size of HT_caps.u.HT_cap using
umin() so that data from a longer-than-expected IE is silently ignored
rather than written out of bounds, preserving interoperability with APs
that pad the element. An early return on oversized IEs was considered
but rejected: it would bypass the pmlmeinfo->HT_caps_enable = 1
assignment that precedes the loop, silently disabling HT mode for APs
that append extra bytes to the HT Capabilities IE. |
