| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
kcsan: Avoid READ_ONCE() in read_instrumented_memory()
Haibo Li reported:
| Unable to handle kernel paging request at virtual address
| ffffff802a0d8d7171
| Mem abort info:o:
| ESR = 0x9600002121
| EC = 0x25: DABT (current EL), IL = 32 bitsts
| SET = 0, FnV = 0 0
| EA = 0, S1PTW = 0 0
| FSC = 0x21: alignment fault
| Data abort info:o:
| ISV = 0, ISS = 0x0000002121
| CM = 0, WnR = 0 0
| swapper pgtable: 4k pages, 39-bit VAs, pgdp=000000002835200000
| [ffffff802a0d8d71] pgd=180000005fbf9003, p4d=180000005fbf9003,
| pud=180000005fbf9003, pmd=180000005fbe8003, pte=006800002a0d8707
| Internal error: Oops: 96000021 [#1] PREEMPT SMP
| Modules linked in:
| CPU: 2 PID: 45 Comm: kworker/u8:2 Not tainted
| 5.15.78-android13-8-g63561175bbda-dirty #1
| ...
| pc : kcsan_setup_watchpoint+0x26c/0x6bc
| lr : kcsan_setup_watchpoint+0x88/0x6bc
| sp : ffffffc00ab4b7f0
| x29: ffffffc00ab4b800 x28: ffffff80294fe588 x27: 0000000000000001
| x26: 0000000000000019 x25: 0000000000000001 x24: ffffff80294fdb80
| x23: 0000000000000000 x22: ffffffc00a70fb68 x21: ffffff802a0d8d71
| x20: 0000000000000002 x19: 0000000000000000 x18: ffffffc00a9bd060
| x17: 0000000000000001 x16: 0000000000000000 x15: ffffffc00a59f000
| x14: 0000000000000001 x13: 0000000000000000 x12: ffffffc00a70faa0
| x11: 00000000aaaaaaab x10: 0000000000000054 x9 : ffffffc00839adf8
| x8 : ffffffc009b4cf00 x7 : 0000000000000000 x6 : 0000000000000007
| x5 : 0000000000000000 x4 : 0000000000000000 x3 : ffffffc00a70fb70
| x2 : 0005ff802a0d8d71 x1 : 0000000000000000 x0 : 0000000000000000
| Call trace:
| kcsan_setup_watchpoint+0x26c/0x6bc
| __tsan_read2+0x1f0/0x234
| inflate_fast+0x498/0x750
| zlib_inflate+0x1304/0x2384
| __gunzip+0x3a0/0x45c
| gunzip+0x20/0x30
| unpack_to_rootfs+0x2a8/0x3fc
| do_populate_rootfs+0xe8/0x11c
| async_run_entry_fn+0x58/0x1bc
| process_one_work+0x3ec/0x738
| worker_thread+0x4c4/0x838
| kthread+0x20c/0x258
| ret_from_fork+0x10/0x20
| Code: b8bfc2a8 2a0803f7 14000007 d503249f (78bfc2a8) )
| ---[ end trace 613a943cb0a572b6 ]-----
The reason for this is that on certain arm64 configuration since
e35123d83ee3 ("arm64: lto: Strengthen READ_ONCE() to acquire when
CONFIG_LTO=y"), READ_ONCE() may be promoted to a full atomic acquire
instruction which cannot be used on unaligned addresses.
Fix it by avoiding READ_ONCE() in read_instrumented_memory(), and simply
forcing the compiler to do the required access by casting to the
appropriate volatile type. In terms of generated code this currently
only affects architectures that do not use the default READ_ONCE()
implementation.
The only downside is that we are not guaranteed atomicity of the access
itself, although on most architectures a plain load up to machine word
size should still be atomic (a fact the default READ_ONCE() still relies
on itself). |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: remove BUG_ON()'s in add_new_free_space()
At add_new_free_space() we have these BUG_ON()'s that are there to deal
with any failure to add free space to the in memory free space cache.
Such failures are mostly -ENOMEM that should be very rare. However there's
no need to have these BUG_ON()'s, we can just return any error to the
caller and all callers and their upper call chain are already dealing with
errors.
So just make add_new_free_space() return any errors, while removing the
BUG_ON()'s, and returning the total amount of added free space to an
optional u64 pointer argument. |
| In the Linux kernel, the following vulnerability has been resolved:
hwrng: amd - Fix PCI device refcount leak
for_each_pci_dev() is implemented by pci_get_device(). The comment of
pci_get_device() says that it will increase the reference count for the
returned pci_dev and also decrease the reference count for the input
pci_dev @from if it is not NULL.
If we break for_each_pci_dev() loop with pdev not NULL, we need to call
pci_dev_put() to decrease the reference count. Add the missing
pci_dev_put() for the normal and error path. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/qaic: Fix bootlog initialization ordering
As soon as we queue MHI buffers to receive the bootlog from the device,
we could be receiving data. Therefore all the resources needed to
process that data need to be setup prior to queuing the buffers.
We currently initialize some of the resources after queuing the buffers
which creates a race between the probe() and any data that comes back
from the device. If the uninitialized resources are accessed, we could
see page faults.
Fix the init ordering to close the race. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix null pointer panic in tracepoint in __replace_atomic_write_block
We got a kernel panic if old_addr is NULL.
https://bugzilla.kernel.org/show_bug.cgi?id=217266
BUG: kernel NULL pointer dereference, address: 0000000000000000
Call Trace:
<TASK>
f2fs_commit_atomic_write+0x619/0x990 [f2fs a1b985b80f5babd6f3ea778384908880812bfa43]
__f2fs_ioctl+0xd8e/0x4080 [f2fs a1b985b80f5babd6f3ea778384908880812bfa43]
? vfs_write+0x2ae/0x3f0
? vfs_write+0x2ae/0x3f0
__x64_sys_ioctl+0x91/0xd0
do_syscall_64+0x5c/0x90
entry_SYSCALL_64_after_hwframe+0x72/0xdc
RIP: 0033:0x7f69095fe53f |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mei: fix potential NULL-ptr deref after clone
If cloning the SKB fails, don't try to use it, but rather return
as if we should pass it.
Coverity CID: 1503456 |
| In the Linux kernel, the following vulnerability has been resolved:
of: overlay: fix null pointer dereferencing in find_dup_cset_node_entry() and find_dup_cset_prop()
When kmalloc() fail to allocate memory in kasprintf(), fn_1 or fn_2 will
be NULL, and strcmp() will cause null pointer dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix timeout of a call that hasn't yet been granted a channel
afs_make_call() calls rxrpc_kernel_begin_call() to begin a call (which may
get stalled in the background waiting for a connection to become
available); it then calls rxrpc_kernel_set_max_life() to set the timeouts -
but that starts the call timer so the call timer might then expire before
we get a connection assigned - leading to the following oops if the call
stalled:
BUG: kernel NULL pointer dereference, address: 0000000000000000
...
CPU: 1 PID: 5111 Comm: krxrpcio/0 Not tainted 6.3.0-rc7-build3+ #701
RIP: 0010:rxrpc_alloc_txbuf+0xc0/0x157
...
Call Trace:
<TASK>
rxrpc_send_ACK+0x50/0x13b
rxrpc_input_call_event+0x16a/0x67d
rxrpc_io_thread+0x1b6/0x45f
? _raw_spin_unlock_irqrestore+0x1f/0x35
? rxrpc_input_packet+0x519/0x519
kthread+0xe7/0xef
? kthread_complete_and_exit+0x1b/0x1b
ret_from_fork+0x22/0x30
Fix this by noting the timeouts in struct rxrpc_call when the call is
created. The timer will be started when the first packet is transmitted.
It shouldn't be possible to trigger this directly from userspace through
AF_RXRPC as sendmsg() will return EBUSY if the call is in the
waiting-for-conn state if it dropped out of the wait due to a signal. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/hns: Fix refcount leak in hns_roce_mmap
rdma_user_mmap_entry_get_pgoff() takes the reference.
Add missing rdma_user_mmap_entry_put() to release the reference.
Acked-by Haoyue Xu <[email protected]> |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: mxcmmc: fix return value check of mmc_add_host()
mmc_add_host() may return error, if we ignore its return value, the memory
that allocated in mmc_alloc_host() will be leaked and it will lead a kernel
crash because of deleting not added device in the remove path.
So fix this by checking the return value and goto error path which will call
mmc_free_host(). |
| In the Linux kernel, the following vulnerability has been resolved:
tty: serial: sh-sci: fix RSCI FIFO overrun handling
The receive error handling code is shared between RSCI and all other
SCIF port types, but the RSCI overrun_reg is specified as a memory
offset, while for other SCIF types it is an enum value used to index
into the sci_port_params->regs array, as mentioned above the
sci_serial_in() function.
For RSCI, the overrun_reg is CSR (0x48), causing the sci_getreg() call
inside the sci_handle_fifo_overrun() function to index outside the
bounds of the regs array, which currently has a size of 20, as specified
by SCI_NR_REGS.
Because of this, we end up accessing memory outside of RSCI's
rsci_port_params structure, which, when interpreted as a plat_sci_reg,
happens to have a non-zero size, causing the following WARN when
sci_serial_in() is called, as the accidental size does not match the
supported register sizes.
The existence of the overrun_reg needs to be checked because
SCIx_SH3_SCIF_REGTYPE has overrun_reg set to SCLSR, but SCLSR is not
present in the regs array.
Avoid calling sci_getreg() for port types which don't use standard
register handling.
Use the ops->read_reg() and ops->write_reg() functions to properly read
and write registers for RSCI, and change the type of the status variable
to accommodate the 32-bit CSR register.
sci_getreg() and sci_serial_in() are also called with overrun_reg in the
sci_mpxed_interrupt() interrupt handler, but that code path is not used
for RSCI, as it does not have a muxed interrupt.
------------[ cut here ]------------
Invalid register access
WARNING: CPU: 0 PID: 0 at drivers/tty/serial/sh-sci.c:522 sci_serial_in+0x38/0xac
Modules linked in: renesas_usbhs at24 rzt2h_adc industrialio_adc sha256 cfg80211 bluetooth ecdh_generic ecc rfkill fuse drm backlight ipv6
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.17.0-rc1+ #30 PREEMPT
Hardware name: Renesas RZ/T2H EVK Board based on r9a09g077m44 (DT)
pstate: 604000c5 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : sci_serial_in+0x38/0xac
lr : sci_serial_in+0x38/0xac
sp : ffff800080003e80
x29: ffff800080003e80 x28: ffff800082195b80 x27: 000000000000000d
x26: ffff8000821956d0 x25: 0000000000000000 x24: ffff800082195b80
x23: ffff000180e0d800 x22: 0000000000000010 x21: 0000000000000000
x20: 0000000000000010 x19: ffff000180e72000 x18: 000000000000000a
x17: ffff8002bcee7000 x16: ffff800080000000 x15: 0720072007200720
x14: 0720072007200720 x13: 0720072007200720 x12: 0720072007200720
x11: 0000000000000058 x10: 0000000000000018 x9 : ffff8000821a6a48
x8 : 0000000000057fa8 x7 : 0000000000000406 x6 : ffff8000821fea48
x5 : ffff00033ef88408 x4 : ffff8002bcee7000 x3 : ffff800082195b80
x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff800082195b80
Call trace:
sci_serial_in+0x38/0xac (P)
sci_handle_fifo_overrun.isra.0+0x70/0x134
sci_er_interrupt+0x50/0x39c
__handle_irq_event_percpu+0x48/0x140
handle_irq_event+0x44/0xb0
handle_fasteoi_irq+0xf4/0x1a0
handle_irq_desc+0x34/0x58
generic_handle_domain_irq+0x1c/0x28
gic_handle_irq+0x4c/0x140
call_on_irq_stack+0x30/0x48
do_interrupt_handler+0x80/0x84
el1_interrupt+0x34/0x68
el1h_64_irq_handler+0x18/0x24
el1h_64_irq+0x6c/0x70
default_idle_call+0x28/0x58 (P)
do_idle+0x1f8/0x250
cpu_startup_entry+0x34/0x3c
rest_init+0xd8/0xe0
console_on_rootfs+0x0/0x6c
__primary_switched+0x88/0x90
---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: Avoid UBSAN error on true_sectors_per_clst()
syzbot reported UBSAN error as below:
[ 76.901829][ T6677] ================================================================================
[ 76.903908][ T6677] UBSAN: shift-out-of-bounds in fs/ntfs3/super.c:675:13
[ 76.905363][ T6677] shift exponent -247 is negative
This patch avoid this error. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix a memleak in multi_transaction_new()
In multi_transaction_new(), the variable t is not freed or passed out
on the failure of copy_from_user(t->data, buf, size), which could lead
to a memleak.
Fix this bug by adding a put_multi_transaction(t) in the error path. |
| In the Linux kernel, the following vulnerability has been resolved:
media: imx-jpeg: Disable useless interrupt to avoid kernel panic
There is a hardware bug that the interrupt STMBUF_HALF may be triggered
after or when disable interrupt.
It may led to unexpected kernel panic.
And interrupt STMBUF_HALF and STMBUF_RTND have no other effect.
So disable them and the unused interrupts.
meanwhile clear the interrupt status when disable interrupt. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: do not run mt76u_status_worker if the device is not running
Fix the following NULL pointer dereference avoiding to run
mt76u_status_worker thread if the device is not running yet.
KASAN: null-ptr-deref in range
[0x0000000000000000-0x0000000000000007]
CPU: 0 PID: 98 Comm: kworker/u2:2 Not tainted 5.14.0+ #78 Hardware
name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
Workqueue: mt76 mt76u_tx_status_data
RIP: 0010:mt76x02_mac_fill_tx_status.isra.0+0x82c/0x9e0
Code: c5 48 b8 00 00 00 00 00 fc ff df 80 3c 02 00 0f 85 94 01 00 00
48 b8 00 00 00 00 00 fc ff df 4d 8b 34 24 4c 89 f2 48 c1 ea 03 <0f>
b6
04 02 84 c0 74 08 3c 03 0f 8e 89 01 00 00 41 8b 16 41 0f b7
RSP: 0018:ffffc900005af988 EFLAGS: 00010246
RAX: dffffc0000000000 RBX: ffffc900005afae8 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff832fc661 RDI: ffffc900005afc2a
RBP: ffffc900005afae0 R08: 0000000000000001 R09: fffff520000b5f3c
R10: 0000000000000003 R11: fffff520000b5f3b R12: ffff88810b6132d8
R13: 000000000000ffff R14: 0000000000000000 R15: ffffc900005afc28
FS: 0000000000000000(0000) GS:ffff88811aa00000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fa0eda6a000 CR3: 0000000118f17000 CR4: 0000000000750ef0
PKRU: 55555554
Call Trace:
mt76x02_send_tx_status+0x1d2/0xeb0
mt76x02_tx_status_data+0x8e/0xd0
mt76u_tx_status_data+0xe1/0x240
process_one_work+0x92b/0x1460
worker_thread+0x95/0xe00
kthread+0x3a1/0x480
ret_from_fork+0x1f/0x30
Modules linked in:
--[ end trace 8df5d20fc5040f65 ]--
RIP: 0010:mt76x02_mac_fill_tx_status.isra.0+0x82c/0x9e0
Code: c5 48 b8 00 00 00 00 00 fc ff df 80 3c 02 00 0f 85 94 01 00 00
48 b8 00 00 00 00 00 fc ff df 4d 8b 34 24 4c 89 f2 48 c1 ea 03 <0f>
b6
04 02 84 c0 74 08 3c 03 0f 8e 89 01 00 00 41 8b 16 41 0f b7
RSP: 0018:ffffc900005af988 EFLAGS: 00010246
RAX: dffffc0000000000 RBX: ffffc900005afae8 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff832fc661 RDI: ffffc900005afc2a
RBP: ffffc900005afae0 R08: 0000000000000001 R09: fffff520000b5f3c
R10: 0000000000000003 R11: fffff520000b5f3b R12: ffff88810b6132d8
R13: 000000000000ffff R14: 0000000000000000 R15: ffffc900005afc28
FS: 0000000000000000(0000) GS:ffff88811aa00000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fa0eda6a000 CR3: 0000000118f17000 CR4: 0000000000750ef0
PKRU: 55555554
Moreover move stat_work schedule out of the for loop. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmem: core: Fix memleak in nvmem_register()
dev_set_name will alloc memory for nvmem->dev.kobj.name in
nvmem_register, when nvmem_validate_keepouts failed, nvmem's
memory will be freed and return, but nobody will free memory
for nvmem->dev.kobj.name, there will be memleak, so moving
nvmem_validate_keepouts() after device_register() and let
the device core deal with cleaning name in error cases. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/core: Fix GID entry ref leak when create_ah fails
If AH create request fails, release sgid_attr to avoid GID entry
referrence leak reported while releasing GID table |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: cadence: Check for the existence of cdns_pcie::ops before using it
cdns_pcie::ops might not be populated by all the Cadence glue drivers. This
is going to be true for the upcoming Sophgo platform which doesn't set the
ops.
Hence, add a check to prevent NULL pointer dereference.
[mani: reworded subject and description] |
| In the Linux kernel, the following vulnerability has been resolved:
binder: fix memory leak in binder_init()
In binder_init(), the destruction of binder_alloc_shrinker_init() is not
performed in the wrong path, which will cause memory leaks. So this commit
introduces binder_alloc_shrinker_exit() and calls it in the wrong path to
fix that. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: idmouse: fix an uninit-value in idmouse_open
In idmouse_create_image, if any ftip_command fails, it will
go to the reset label. However, this leads to the data in
bulk_in_buffer[HEADER..IMGSIZE] uninitialized. And the check
for valid image incurs an uninitialized dereference.
Fix this by moving the check before reset label since this
check only be valid if the data after bulk_in_buffer[HEADER]
has concrete data.
Note that this is found by KMSAN, so only kernel compilation
is tested. |
