| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| MSI Center before 2.0.52.0 has Missing PE Signature Validation. |
| The WP Maintenance plugin for WordPress is vulnerable to IP Address Spoofing in all versions up to, and including, 6.1.9.2 due to insufficient IP address validation and use of user-supplied HTTP headers as a primary method for IP retrieval. This makes it possible for unauthenticated attackers to bypass maintenance mode. |
| Authentication issue that does not verify the source of a packet which could allow an attacker to create a denial-of-service condition or modify the configuration of the device. |
| sigstore-java is a sigstore java client for interacting with sigstore infrastructure. sigstore-java has insufficient verification for a situation where a validly-signed but "mismatched" bundle is presented as proof of inclusion into a transparency log. This bug impacts clients using any variation of KeylessVerifier.verify(). The verifier may accept a bundle with an unrelated log entry, cryptographically verifying everything but fails to ensure the log entry applies to the artifact in question, thereby "verifying" a bundle without any proof the signing event was logged. This allows the creation of a bundle without fulcio certificate and private key combined with an unrelated but time-correct log entry to fake logging of a signing event. A malicious actor using a compromised identity may want to do this to prevent discovery via rekor's log monitors. The signer's identity will still be available to the verifier. The signature on the bundle must still be on the correct artifact for the verifier to pass. sigstore-gradle-plugin and sigstore-maven-plugin are not affected by this as they only provide signing functionality. This issue has been patched in v1.1.0 release with PR #856. All users are advised to upgrade. There are no known workarounds for this vulnerability. |
| The Limit Login Attempts (Spam Protection) plugin for WordPress is vulnerable to IP Address Spoofing in versions up to, and including, 5.3. This is due to insufficient restrictions on where the IP Address information is being retrieved for request logging and login restrictions. Attackers can supply the X-Forwarded-For header with with a different IP Address that will be logged and can be used to bypass settings that may have blocked out an IP address or country from logging in. |
| Hosts listed in TrustedOrigins implicitly allow requests from the corresponding HTTP origins, allowing network MitMs to perform CSRF attacks. After the CVE-2025-24358 fix, a network attacker that places a form at http://example.com can't get it to submit to https://example.com because the Origin header is checked with sameOrigin against a synthetic URL. However, if a host is added to TrustedOrigins, both its HTTP and HTTPS origins will be allowed, because the schema of the synthetic URL is ignored and only the host is checked. For example, if an application is hosted on https://example.com and adds example.net to TrustedOrigins, a network attacker can serve a form at http://example.net to perform the attack. Applications should migrate to net/http.CrossOriginProtection, introduced in Go 1.25. If that is not an option, a backport is available as a module at filippo.io/csrf, and a drop-in replacement for the github.com/gorilla/csrf API is available at filippo.io/csrf/gorilla. |
| The firmware upgrade function in the admin web interface of the Rittal IoT Interface & CMC III Processing Unit devices checks if
the patch files are signed before executing the containing run.sh
script. The signing process is kind of an HMAC with a long string as key
which is hard-coded in the firmware and is freely available for
download. This allows crafting malicious "signed" .patch files in order
to compromise the device and execute arbitrary code. |
| The LOGIN AND REGISTRATION ATTEMPTS LIMIT plugin for WordPress is vulnerable to IP Address Spoofing in versions up to, and including, 2.1. This is due to insufficient restrictions on where the IP Address information is being retrieved for request logging and login restrictions. Attackers can supply the X-Forwarded-For header with with a different IP Address that will be logged and can be used to bypass settings that may have blocked out an IP address from logging in. |
| Incorrect access control in Mirotalk before commit 9de226 allows attackers to arbitrarily change usernames via sending a crafted roomAction request to the server. |
| An issue in KIA Seltos vehicle instrument cluster with software and hardware v1.0 allows attackers to cause a Denial of Service (DoS) via ECU reset UDS service. NOTE: this is disputed by the Supplier because the findings came from a potentially unrealistic test environment (an isolated ECU part that was not in a vehicle), and because the ECUReset specification does not allow a manufacturer to require SecurityAccess and Authentication. |
| An attacker who can execute arbitrary Operating Systems commands, can bypass code signing enforcements in the kernel, and execute arbitrary native code. This vulnerability has been resolved in firmware version 2.800.0000000.8.R.20241111. |
| gitoxide An idiomatic, lean, fast & safe pure Rust implementation of Git. `gix-path` can be tricked into running another `git.exe` placed in an untrusted location by a limited user account on Windows systems. Windows permits limited user accounts without administrative privileges to create new directories in the root of the system drive. While `gix-path` first looks for `git` using a `PATH` search, in version 0.10.8 it also has a fallback strategy on Windows of checking two hard-coded paths intended to be the 64-bit and 32-bit Program Files directories. Existing functions, as well as the newly introduced `exe_invocation` function, were updated to make use of these alternative locations. This causes facilities in `gix_path::env` to directly execute `git.exe` in those locations, as well as to return its path or whatever configuration it reports to callers who rely on it. Although unusual setups where the system drive is not `C:`, or even where Program Files directories have non-default names, are technically possible, the main problem arises on a 32-bit Windows system. Such a system has no `C:\Program Files (x86)` directory. A limited user on a 32-bit Windows system can therefore create the `C:\Program Files (x86)` directory and populate it with arbitrary contents. Once a payload has been placed at the second of the two hard-coded paths in this way, other user accounts including administrators will execute it if they run an application that uses `gix-path` and do not have `git` in a `PATH` directory. (While having `git` found in a `PATH` search prevents exploitation, merely having it installed in the default location under the real `C:\Program Files` directory does not. This is because the first hard-coded path's `mingw64` component assumes a 64-bit installation.). Only Windows is affected. Exploitation is unlikely except on a 32-bit system. In particular, running a 32-bit build on a 64-bit system is not a risk factor. Furthermore, the attacker must have a user account on the system, though it may be a relatively unprivileged account. Such a user can perform privilege escalation and execute code as another user, though it may be difficult to do so reliably because the targeted user account must run an application or service that uses `gix-path` and must not have `git` in its `PATH`. The main exploitable configuration is one where Git for Windows has been installed but not added to `PATH`. This is one of the options in its installer, though not the default option. Alternatively, an affected program that sanitizes its `PATH` to remove seemingly nonessential directories could allow exploitation. But for the most part, if the target user has configured a `PATH` in which the real `git.exe` can be found, then this cannot be exploited. This issue has been addressed in release version 0.10.9 and all users are advised to upgrade. There are no known workarounds for this vulnerability. |
| The system suffers from the absence of a kernel module signature verification. If an attacker can execute commands on behalf of root user (due to additional vulnerabilities), then he/she is also able to load custom kernel modules to the kernel space and execute code in the kernel context. Such a flaw can lead to taking control over the entire system.
First identified on Nissan Leaf ZE1 manufactured in 2020. |
| The Claudio Sanches – Checkout Cielo for WooCommerce plugin for WordPress is vulnerable to unauthorized modification of data due to insufficient payment validation in the update_order_status() function in all versions up to, and including, 1.1.0. This makes it possible for unauthenticated attackers to update the status of orders to paid bypassing payment. |
| Starch versions 0.14 and earlier generate session ids insecurely.
The default session id generator returns a SHA-1 hash seeded with a counter, the epoch time, the built-in rand function, the PID, and internal Perl reference addresses. The PID will come from a small set of numbers, and the epoch time may be guessed, if it is not leaked from the HTTP Date header. The built-in rand function is unsuitable for cryptographic usage.
Predicable session ids could allow an attacker to gain access to systems. |
| A SAML library not dependent on any frameworks that runs in Node. In version 5.0.1, Node-SAML loads the assertion from the (unsigned) original response document. This is different than the parts that are verified when checking signature. This allows an attacker to modify authentication details within a valid SAML assertion. For example, in one attack it is possible to remove any character from the SAML assertion username. To conduct the attack an attacker would need a validly signed document from the identity provider (IdP). This is fixed in version 5.1.0. |
| A vulnerability classified as problematic has been found in gradio-app gradio up to 5.29.1. This affects the function is_valid_origin of the component CORS Handler. The manipulation of the argument localhost_aliases leads to erweiterte Rechte. It is possible to initiate the attack remotely. The complexity of an attack is rather high. The exploitability is told to be difficult. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| An issue was discovered in the oidc (aka OpenID Connect Authentication) extension before 4.0.0 for TYPO3. The account linking logic allows a pre-hijacking attack, leading to Account Takeover. The attack can only be exploited if the following requirements are met: (1) an attacker can anticipate the e-mail address of the user, (2) an attacker can register a public frontend user account using that e-mail address before the user's first OIDC login, and (3) the IDP returns an email field containing the e-mail address of the user, |
| RICOH Streamline NX V3 PC Client versions 3.5.0 to 3.7.0 contains an issue with use of less trusted source, which may allow an attacker who can conduct a man-in-the-middle attack to eavesdrop upgrade requests and execute a malicious DLL with custom code. |
| Due to the lack of randomness in assigning Object Identifiers in the SAP NetWeaver AS JAVA IIOP service, an authenticated attacker with low privileges could predict the identifiers by conducting a brute force search. By leveraging knowledge of several identifiers generated close to the same time, the attacker could determine a desired identifier which could enable them to access limited system information. This poses a low risk to confidentiality without impacting the integrity or availability of the service. |
