| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: reject out-of-range useconds in NFSv2 SETATTR/CREATE
The NFSv2 sattr decoder converts the wire useconds to nanoseconds in
svcxdr_decode_sattr():
iap->ia_atime.tv_nsec = tmp2 * NSEC_PER_USEC;
tmp2 is a u32 and NSEC_PER_USEC is 1000, so the product is computed in
unsigned long. On ILP32 that is 32 bits, and an out-of-range useconds
value such as 4294968 wraps to tv_nsec == 704. The corruption therefore
happens during decode, before any proc function can inspect the value,
and a later range check on tv_nsec would see an in-range result and
accept it. Rejecting in the decoder yields an RPC GARBAGE_ARGS reply.
NFSv2 defines no NFSERR_INVAL, so there is no NFS-level status to return
for a malformed time argument, and the check cannot move to the proc
function the way the v3/v4 nsec range checks do.
Guard the raw useconds before the multiplication and reject values
greater than 1000000. useconds == 1000000 is kept: it is the Sun
convention for "set to the current server time", and the in-tree Linux
NFSv2 client emits it in both the atime and the mtime field for a plain
touch / utimes(file, NULL) (see encode_sattr() and
xdr_encode_current_server_time() in fs/nfs/nfs2xdr.c). Rejecting 1000000
would turn that common operation into a hard decode failure for both
SETATTR and CREATE. 1000000 * NSEC_PER_USEC is 10^9, which does not wrap
on ILP32, so the Sun convention value passes through safely. Only
genuinely out-of-range values (> 1000000) are rejected. The atime and
mtime guards are therefore symmetric.
The decoder only applied the Sun convention in the mtime block, which
clears ATTR_ATIME_SET|ATTR_MTIME_SET when mtime useconds == 1000000. If a
client puts 1000000 in the atime field but not in the mtime field, the
atime block stored an out-of-range tv_nsec (10^9) and left ATTR_ATIME_SET
set, so the bogus value reached the filesystem. Apply the convention in
the atime block as well, clearing ATTR_ATIME_SET so the server uses its
current time and ignores the value. Only ATTR_ATIME_SET is cleared there.
The mtime block keeps its existing behavior, where 1000000 means "set
both atime and mtime to now".
[ cel: various tweaks, addenda, and clean-ups ] |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: Prevent lock owner use-after-free during client teardown
__destroy_client() releases a client's open owners, but a lock owner
whose only reference is a blocked lock (nbl) stays on
cl_ownerstr_hashtbl. client_has_state() does not count a bare owner,
so DESTROY_CLIENTID can reach __destroy_client() with such owners
present.
__destroy_client() then walks the table, calling remove_blocked_locks()
on each owner without a reference. Freeing a blocked lock drops the
owner reference held via flc_owner. The per-net laundromat reaps
blocked locks from nn->blocked_locks_lru independently of client state.
The two paths share blocked_locks_lock only for the list splice, not
the owner's lifetime. The laundromat therefore frees the owner as
__destroy_client() dereferences it, a NULL dereference in
remove_blocked_locks().
nfsd4_release_lockowner() holds a reference across the same call;
__destroy_client() does not. Hold cl_lock across the walk, taking a
reference and unhashing each owner, then drop it before
remove_blocked_locks() and nfs4_put_stateowner(), which take
blocked_locks_lock and cl_lock. |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: reject buckets with mismatched CRUSH ids
crush_decode() stores bucket data by array slot, and the mapper later
derives the per-bucket workspace index from the decoded bucket id. A
malformed map can therefore make one bucket reuse another bucket's
workspace by encoding an id different from -1 - slot.
For uniform buckets, the second replica selection expands the source
bucket's permutation into that aliased workspace buffer. If the source
bucket is larger than the aliased bucket, the write runs past the smaller
permutation array and can escape the kvmalloc'd CRUSH workspace. KASAN
reports a slab OOB write of 4 bytes in bucket_perm_choose().
Reject buckets whose encoded id does not match their array slot. Valid
CRUSH maps already use the canonical negative id corresponding to the
bucket slot, so this restores the invariant expected by
work->work[-1 - in->id] without changing valid map behavior. |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: fix UAF in __kick_flushing_caps() on cf entry freed during unlock
list_for_each_entry() iterates ci->i_cap_flush_list but drops
i_ceph_lock to send cap messages. During the unlock window,
handle_cap_flush_ack() can acquire i_ceph_lock, detach cf entries
with tid <= flush_tid from the list, release i_ceph_lock, and free
them via ceph_free_cap_flush() outside any lock. When the original
thread reacquires i_ceph_lock and the for-loop macro advances via
cf = list_next_entry(cf, i_list), it dereferences cf->i_list.next
on freed memory.
The race timeline:
__kick_flushing_caps() handle_cap_flush_ack()
----------------------- -----------------------
holds i_ceph_lock <---
iterates to cf (tid=10)
prepares FLUSH message
drops i_ceph_lock <---
__send_cap() ── FLUSH(tid=10)
MDS sends FLUSH_ACK(tid=10)
---> acquires i_ceph_lock
cf->tid(10) <= flush_tid(10),
detaches cf from i_cap_flush_list
drops i_ceph_lock
ceph_free_cap_flush(cf) <- frees it!
acquires i_ceph_lock <---
for-loop advances:
cf = list_next_entry(cf, i_list)
-- UAF on freed cf->i_list.next
The cf was just sent by __kick_flushing_caps itself via __send_cap().
The MDS may respond with FLUSH_ACK quickly enough that
handle_cap_flush_ack() frees cf before __kick_flushing_caps can
finish the iteration.
Fix by converting to a manual while loop: save the next pointer
under i_ceph_lock before dropping it, then use the saved pointer
after reacquiring, so the potentially-freed cf is never accessed again. |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: reject export_targets ranks >= CEPH_MAX_MDS in mdsmap decode
MDSMap export_targets entries are monitor controlled. check_new_map()
uses each entry as a bit number in a fixed stack bitmap, so a rank
outside the protocol namespace can make set_bit() write past the end of
the array.
Reject ranks outside CEPH_MAX_MDS while decoding the map. Do not
validate against possible_max_rank here because maps may legitimately
reference ranks beyond a temporarily reduced max_mds. |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: bound xattr value length in __build_xattrs()
__build_xattrs() decodes the MDS-supplied xattr blob one attribute at a
time. For each attribute it reads a 32-bit name length, advances past the
name bytes, reads a 32-bit value length, records the value pointer, and
advances past the value bytes. The two length fields are read with
ceph_decode_32_safe(), but the value bytes themselves are advanced over
with a bare "p += len" and no ceph_decode_need() check that "len" bytes
remain in the blob.
For every attribute except the last, the next iteration's
ceph_decode_32_safe() on the following name length implicitly verifies
that the previous value did not run past the blob end. The final
attribute has no successor, so its decoded value length is never checked
against the blob bounds. A malicious or compromised metadata server can
set the last attribute's value length larger than the bytes actually
present in the blob.
The blob is a dedicated kvmalloc() allocation sized to the wire length
(ceph_buffer_new() in ceph_fill_inode()). __set_xattr() records the
oversized length in xattr->val_len verbatim, and a later getxattr(2) runs
memcpy(value, xattr->val, xattr->val_len) into a user-supplied buffer,
copying bytes past the end of the allocation back to user space.
Impact: a malicious metadata server discloses adjacent kernel heap bytes
to a local user via getxattr(2) on a CephFS file. Add the missing
ceph_decode_need() so an out-of-bounds value length on the final
attribute fails the decode and returns -EIO instead of being stored. |
| In the Linux kernel, the following vulnerability has been resolved:
audit: avoid dropping live tree ref on fsnotify rule autoremove
audit_del_rule() is used for both netlink deletion templates and internal
fsnotify autoremove. The former passes a parsed template which owns a
temporary tree reference; the latter passes the installed entry itself.
The unconditional audit_put_tree() at the end of audit_del_rule() assumes
the template case. For mixed AUDIT_DIR plus AUDIT_EXE rules, an fsnotify
autoremove event therefore drops the installed rule's live tree reference.
Repeating this across rules sharing the same tree can free the tree while
another rule still references it, and a later autoremove dereferences the
freed pathname while comparing rules.
Move the temporary-tree put to audit_rule_change(), the caller that owns
deletion templates. Keep it in the AUDIT_DEL_RULE cleanup so both
successful deletion and -ENOENT still release the parser-owned tree.
[PM: dropped unnecessary comment for line length reasons] |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: clear ce->tgthint in free_tgts()
When free_tgts() frees all structures in ce->tlist, ce->tgthint
is left pointing to one of the freed cache_dfs_tgt structures.
If ce->tgthint is not reset before it is used later, it results
in a use-after-free.
Set ce->tgthint to NULL in free_tgts() after the elements are
freed to reflect that no elements remain. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: sensor: custom: Fix field sysfs group cleanup on failure
hid_sensor_custom_add_attributes() creates one sysfs group for each
custom sensor field. If sysfs_create_group() fails after some groups
have already been created, the function returns the error without
removing the previously created groups.
Add a local unwind path to remove the groups that were already created.
With enable_sensor exposed only after the field attributes are ready,
this path can free sensor_inst->fields without leaving enable_sensor
able to access pointers into that array. |
| In the Linux kernel, the following vulnerability has been resolved:
ata: libata-scsi: fix DSM TRIM for sector sizes larger than 2048 bytes
ata_scsi_write_same_xlat() translates a SCSI WRITE SAME command with the
UNMAP bit set into an ATA DATA SET MANAGEMENT TRIM command. The TRIM
descriptor is built by ata_format_dsm_trim_descr() into the 2048-byte
ata_scsi_rbuf staging buffer, and the number of bytes copied is compared
against the logical sector size by the caller:
size = ata_format_dsm_trim_descr(scmd, trmax, block, n_block);
if (size != len) /* len == sdp->sector_size */
goto invalid_param_len;
ata_format_dsm_trim_descr() clamps the copy length to ATA_SCSI_RBUF_SIZE
(2048). On a device whose logical sector size exceeds that (e.g. a 4Kn
device, where sector_size == 4096) the function can never return more than
2048, while the caller expects it to return sector_size. The comparison
therefore always fails, so every TRIM is rejected with "Parameter list
length error" and WARN_ON() splats on each attempt. TRIM / discard is
thus completely broken on such devices.
The descriptor was incorrectly sized from the logical sector size. A DSM
TRIM payload is a list of 512-byte pages, each holding up to
ATA_MAX_TRIM_RNUM (64) LBA Range Entries, and is independent of the logical
sector size. The Block Limits VPD page already advertises a single such
page as the maximum WRITE SAME length (65535 * ATA_MAX_TRIM_RNUM logical
blocks), so the block layer never sends a request that needs more than one
page.
Emit exactly one 512-byte page, independent of the logical sector size,
and transfer only that page (COUNT == 1). For a 512-byte-sector device
this is unchanged; devices with larger logical sectors now work instead of
failing every TRIM. |
| In the Linux kernel, the following vulnerability has been resolved:
dm array: reject an array block whose value size is not the caller's
array_block_check() can only compare the header against itself, so a block
with value_size 4 and max_entries 1018 is internally consistent and passes.
dm-cache keeps two arrays -- mappings at 8 bytes and hints at 4 -- and the
roots for both live in the superblock. Point the mappings root at a hint
block and __load_mappings() walks it through an info whose value size is 8,
so element_at() strides 8 bytes over 4-byte entries and reaches offset 8160
of a 4096-byte block.
get_ablock() and __shadow_ablock() are the two places that hold the block
and the caller at once. Reject there when the two value sizes disagree.
Arrays only ever read their own blocks, so this fires on crafted metadata
only. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: RFCOMM: serialize security confirmation handling
rfcomm_security_cfm() looks up a session on session_list and then walks
its DLC list without holding rfcomm_mutex. Since RFCOMM session teardown
uses rfcomm_mutex, krfcommd can close and free the same session and DLCs
concurrently:
hci_rx_work krfcommd
----------- ---------
rfcomm_session_get()
rfcomm_lock()
rfcomm_session_close()
rfcomm_dlc_unlink()
rfcomm_session_del()
kfree(s)
rfcomm_unlock()
walk s->dlcs
The callback can then read a freed session list head and touch freed DLCs
while updating their flags or timers.
Serialize the session lookup and DLC traversal in rfcomm_security_cfm()
with rfcomm_mutex. This matches the existing RFCOMM session lifetime
rules and prevents concurrent rfcomm_session_del() / rfcomm_dlc_unlink()
from tearing the objects down while the callback is using them.
KASAN reported:
BUG: KASAN: slab-use-after-free in rfcomm_security_cfm+0x41c/0x440
Read of size 8 at addr ffff888111fb3960 by task kworker/u17:1/89
Workqueue: hci0 hci_rx_work
Call Trace:
rfcomm_security_cfm+0x41c/0x440
hci_encrypt_cfm+0x139/0x590
hci_encrypt_change_evt+0x37b/0xc40
hci_event_packet+0x71b/0xb20
hci_rx_work+0x293/0x730
Allocated by task 69:
rfcomm_session_add+0x9e/0x2f0
rfcomm_run+0x44b/0x41e0
Freed by task 69:
kfree+0x131/0x3c0
rfcomm_session_del+0x188/0x220
rfcomm_run+0x1985/0x41e0 |
| In the Linux kernel, the following vulnerability has been resolved:
ip6_tunnel: use skb_cow_head() in ip6_tnl_xmit()
ip6_tnl_xmit() may need to expand headroom before it can push the
outer IPv6 and optional encap headers. It currently does that with
skb_realloc_headroom(), copies skb->sk ownership, consumes the original
skb, and then continues processing with the replacement skb kept only in
its local variable.
That is safe only if the helper cannot fail afterwards. But this helper
still has post-reallocation error exits. collect_md tunnels reject
non-NONE encap after the replacement, and ip6_tnl_encap() can also fail
later. In those cases the helper returns an error to its callers while
the caller still only has the original skb pointer.
Both ip6_tnl_start_xmit() and the IPv6 GRE paths free the caller skb on
error, so they can end up freeing an skb that ip6_tnl_xmit() already
consumed.
Use skb_cow_head() instead. It provides the required headroom and
writability without privately replacing the caller-owned skb, so later
error returns cannot leave callers with a stale pointer.
The Ethernet users, ip6gretap and ip6erspan, clear IFF_TX_SKB_SHARING
and already call skb_cow_head() before entering ip6_tnl_xmit(). They do
not rely on the removed skb_shared() reallocation. This also makes the
IPv6 tunnel path consistent with ip_tunnel_xmit(). |
| In the Linux kernel, the following vulnerability has been resolved:
libnvdimm/labels: Prevent integer overflow in __nd_label_validate()
The on-media namespace index field nslot is a u32 read from the DIMM
label storage area. __nd_label_validate() bounds it against the config
area size, but sizeof_namespace_label() returns unsigned, so the product
nslot * label_size is evaluated in 32-bit and wraps modulo 2^32 before
the comparison. A crafted nslot passes the bound and is then used as the
loop trip count in nd_label_data_init(), whose memset() walks off the end
of the config_size buffer: an out-of-bounds write.
The field is not trusted -- it comes from the medium, or from userspace
via ND_CMD_SET_CONFIG_DATA. Evaluate the product in 64-bit so the bound
check is exact; conforming labels are unaffected.
The check was safe when introduced by commit 4a826c83db4e ("libnvdimm:
namespace indices: read and validate"): it multiplied by sizeof(struct
nd_namespace_label), a size_t, so on a 64-bit build the product did not
wrap. Commit 564e871aa66f ("libnvdimm, label: add v1.2 nvdimm label
definitions") narrowed it to 32 bits when the label size became a runtime
value read via sizeof_namespace_label(). |
| In the Linux kernel, the following vulnerability has been resolved:
md: do overflow check for sb->bblog_shift in super_1_load()
In super_1_load(), sb->bblog_shift is an __u8 type value loaded from on-
disk superblock. It is used for badblocks API badblocks_set() by the
following sequence,
1930 rdev->badblocks.shift = sb->bblog_shift;
1931 for (i = 0 ; i < (sectors << (9-3)) ; i++, bbp++) {
1932 u64 bb = le64_to_cpu(*bbp);
1933 int count = bb & (0x3ff);
1934 u64 sector = bb >> 10;
1935 sector <<= sb->bblog_shift;
1936 count <<= sb->bblog_shift;
1937 if (bb + 1 == 0)
1938 break;
1939 if (!badblocks_set(&rdev->badblocks, sector, count, 1))
1940 return -EINVAL;
1941 }
bb->bblog_shit is in range of 0-255, variable sector is 64bit width, for
an invalid bb->bblog_shit, it is possible to make sector be overflowed
by the following calculation,
1935 sector <<= sb->bblog_shift;
Then in turn when call badblocks_set() at line 1939 with the invalid
rdev->badblocks.shift set at line 1930, may result an overflow inside
_badblocks_clear() in block/badblocks.c.
Although there are many places to call badblocks APIs, the non-zero
shift value is only used in super_1_load(), other places always use 0 as
the shift value. Therefore it is unnecessary to do a general shift value
overflow check inside badblock API, and just check here as the caller.
This may avoid unnecessary check, make the badblocks API code more simple
and elegant. |
| In the Linux kernel, the following vulnerability has been resolved:
mpls: reload header after pskb_may_pull()
mpls_select_multipath() calls mpls_multipath_hash() to choose a nexthop
when an MPLS route has multiple nexthops. While walking the MPLS label
stack, the hash routine caches hdr for the current label. After finding
the bottom-of-stack label, it calls pskb_may_pull() before reading the
inner IP header.
If an skb is constructed with the inner IP header in nonlinear data and
insufficient tailroom in the linear head, pskb_may_pull() calls
pskb_expand_head() to replace the skb head and free the old one. This
leaves hdr pointing to freed memory. The IPv6 path can invalidate hdr
again when it performs a second pull for the larger header.
The issue was found through static analysis. A reproducer sending a legal
Geneve packet through a bareudp/MPLS multipath setup triggered the same
KASAN report in 2 of 2 unpatched runs:
BUG: KASAN: slab-use-after-free in mpls_select_multipath
Read of size 1 at addr ffff88800ecc6e20 by task ksoftirqd/1/23
Call Trace:
mpls_select_multipath
mpls_forward
__netif_receive_skb_list_core
netif_receive_skb_list_internal
napi_complete_done
gro_cell_poll
__napi_poll
net_rx_action
Freed by task 23:
kfree
pskb_expand_head
__pskb_pull_tail
mpls_select_multipath
Reload hdr from the current skb head after each successful pull before
deriving the inner IPv4 or IPv6 header pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: fix uninitialized local_id in syncookie MP_JOIN reconstruction
mptcp_token_join_cookie_init_state() restores remote_nonce, local_nonce,
backup, join_id, token and msk from the saved cookie entry when rebuilding
the request socket for a MP_JOIN 4th-ACK handled under SYN cookies, but it
does not restore local_id, even though the SYN path saved it.
subflow_ulp_clone() then reads that uninitialized field and stores it as
the joined subflow's address-ID. Because the request-sock slab is
SLAB_TYPESAFE_BY_RCU and not zeroed on allocation, the value is the stale
byte of a previously freed request socket, which an off-path peer can
influence by sending concurrent MP_JOIN SYNs. This corrupts the path
manager's id-based subflow bookkeeping for the connection.
Restore subflow_req->local_id from the cookie entry, as done for the other
fields. |
| In the Linux kernel, the following vulnerability has been resolved:
SUNRPC: xdr_buf_trim: clamp buf->len to avoid underflow
xdr_buf_trim() trims `len` bytes from the tail of an xdr_buf by
walking the tail, pages, and head iovecs. Each per-section step
uses min_t() so it never removes more bytes than that section
holds, but the final accounting at the fix_len label subtracts the
total bytes actually consumed from buf->len without any clamp:
fix_len:
buf->len -= (len - trim);
When the caller has set buf->len to a value smaller than the sum
of the iov_lens, (len - trim) can exceed buf->len and the unsigned
subtraction wraps to near UINT_MAX. gss_krb5_unwrap_v2() reaches
xdr_buf_trim() in exactly that state:
buf->head[0].iov_len -= GSS_KRB5_TOK_HDR_LEN + headskip;
buf->len = len - (GSS_KRB5_TOK_HDR_LEN + headskip);
xdr_buf_trim(buf, ec + GSS_KRB5_TOK_HDR_LEN + tailskip);
buf->len is a small wire-derived value while the iov_lens are at
page scale, so the per-section loops legitimately consume far more
bytes than buf->len records. The wrapped buf->len then propagates
as the authoritative stream bound into every downstream XDR
decoder.
Fix by clamping the decrement so buf->len bottoms out at zero:
buf->len -= min_t(unsigned int, buf->len, len - trim);
On the normal path where the iov_lens sum to buf->len, (len - trim)
is always <= buf->len and the result is identical to before. No
callers change behavior outside the underflow case. |
| In the Linux kernel, the following vulnerability has been resolved:
sunrpc: route to a populated pool in svc_pool_for_cpu()
svc_set_num_threads() spreads the requested threads evenly across the
service's pools (base = nrservs / sv_nrpools). When a service runs
fewer threads than it has pools -- e.g. an nfsd configured with fewer
threads than the host has NUMA nodes while running in "pernode" or
"percpu" mode -- the trailing pools are left with no threads at all.
svc_xprt_enqueue() selects a pool from the CPU servicing the transport,
queues the transport on that pool's sp_xprts, and only wakes a thread
from the same pool. Each thread services exclusively its own pool, so a
transport that lands on a threadless pool is enqueued on sp_xprts and
never picked up: the connection hangs indefinitely.
Have svc_pool_for_cpu() skip pools that currently have no threads,
falling back to the next populated pool. This trades NUMA locality for
a guarantee that the work is actually serviced. sp_nrthreads is only
updated under the service mutex; the lockless read here is a best-effort
routing hint, so annotate it with data_race(). |
| In the Linux kernel, the following vulnerability has been resolved:
SUNRPC: always drain cache_cleaner before destroying a cache_detail
sunrpc_destroy_cache_detail() only cancels the global cache_cleaner
delayed_work when cache_list is empty. During per-netns teardown
cache_list is never empty because init_net's caches remain registered,
so the cancel never fires. After unlink, the caller proceeds to
cache_destroy_net() which kfrees the cache_detail while cache_clean()
may still hold a dangling pointer to it. The result is a
use-after-free: cache_dequeue() takes cd->queue_lock on freed memory,
and cache_put() dereferences cd->cache_put as a function pointer from
freed slab.
Drop the list_empty guard so that cancel_delayed_work_sync() always
runs, ensuring any in-flight cache_clean() completes before the
cache_detail is freed. Re-arm the cleaner afterwards if other caches
are still registered. |
