| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| fedora-arm-installer up to and including 1.99.16 is vulnerable to local privilege escalation due to lack of checking the error condition of mount operation failure on unsafely created temporary directories. |
| A vulnerability in the DNS code of Cisco ASA Software could allow an unauthenticated, remote attacker to cause an affected device to reload or corrupt the information present in the device's local DNS cache. The vulnerability is due to a flaw in handling crafted DNS response messages. An attacker could exploit this vulnerability by triggering a DNS request from the Cisco ASA Software and replying with a crafted response. A successful exploit could cause the device to reload, resulting in a denial of service (DoS) condition or corruption of the local DNS cache information. Note: Only traffic directed to the affected device can be used to exploit this vulnerability. This vulnerability affects Cisco ASA Software configured in routed or transparent firewall mode and single or multiple context mode. This vulnerability can be triggered by IPv4 and IPv6 traffic. This vulnerability affects Cisco ASA Software running on the following products: Cisco ASA 1000V Cloud Firewall, Cisco ASA 5500 Series Adaptive Security Appliances, Cisco ASA 5500-X Series Next-Generation Firewalls, Cisco ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Cisco Adaptive Security Virtual Appliance (ASAv), Cisco Firepower 9300 ASA Security Module, Cisco ISA 3000 Industrial Security Appliance. Fixed versions: 9.1(7.12) 9.2(4.18) 9.4(3.12) 9.5(3.2) 9.6(2.2). Cisco Bug IDs: CSCvb40898. |
| A vulnerability in the TCP connection handling functionality of Cisco Remote Expert Manager Software 11.0.0 could allow an unauthenticated, remote attacker to disable TCP ports and cause a denial of service (DoS) condition on an affected system. The vulnerability is due to a lack of rate-limiting functionality in the TCP Listen application of the affected software. An attacker could exploit this vulnerability by sending a crafted TCP traffic stream in which specific types of TCP packets are flooded to an affected device, for example a TCP packet stream in which the TCP FIN bit is set in all the TCP packets. A successful exploit could allow the attacker to cause certain TCP listening ports on the affected system to stop accepting incoming connections for a period of time or until the affected device is restarted, resulting in a DoS condition. In addition, system resources, such as CPU and memory, could be exhausted during the attack. Cisco Bug IDs: CSCva29806. |
| A vulnerability in the Session Initiation Protocol (SIP) of the Cisco TelePresence Codec (TC) and Collaboration Endpoint (CE) Software could allow an unauthenticated, remote attacker to cause a TelePresence endpoint to reload unexpectedly, resulting in a denial of service (DoS) condition. The vulnerability is due to a lack of flow-control mechanisms within the software. An attacker could exploit this vulnerability by sending a flood of SIP INVITE packets to the affected device. An exploit could allow the attacker to impact the availability of services and data of the device, including a complete DoS condition. This vulnerability affects the following Cisco TC and CE platforms when running software versions prior to TC 7.3.8 and CE 8.3.0. Cisco Bug IDs: CSCux94002. |
| A vulnerability in the Internet Key Exchange Version 1 (IKEv1) XAUTH code of Cisco ASA Software could allow an authenticated, remote attacker to cause a reload of an affected system. The vulnerability is due to insufficient validation of the IKEv1 XAUTH parameters passed during an IKEv1 negotiation. An attacker could exploit this vulnerability by sending crafted parameters. Note: Only traffic directed to the affected system can be used to exploit this vulnerability. This vulnerability only affects systems configured in routed firewall mode and in single or multiple context mode. This vulnerability can be triggered by IPv4 or IPv6 traffic. A valid IKEv1 Phase 1 needs to be established to exploit this vulnerability, which means that an attacker would need to have knowledge of a pre-shared key or have a valid certificate for phase 1 authentication. This vulnerability affects Cisco ASA Software running on the following products: Cisco ASA 1000V Cloud Firewall, Cisco ASA 5500 Series Adaptive Security Appliances, Cisco ASA 5500-X Series Next-Generation Firewalls, Cisco ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Cisco Adaptive Security Virtual Appliance (ASAv), Cisco ASA for Firepower 9300 Series, Cisco ISA 3000 Industrial Security Appliance. Fixed versions: 9.1(7.7) 9.2(4.11) 9.4(4) 9.5(3) 9.6(1.5). Cisco Bug IDs: CSCuz11685. |
| NSD before 4.1.11 allows remote DNS master servers to cause a denial of service (/tmp disk consumption and slave server crash) via a zone transfer with unlimited data. |
| A vulnerability in SMART-SSL Accelerator functionality for Cisco Wide Area Application Services (WAAS) 6.2.1, 6.2.1a, and 6.2.3a could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition where the WAN optimization could stop functioning while the process restarts. The vulnerability is due to a Secure Sockets Layer/Transport Layer Security (SSL/TLS) alert being incorrectly handled when in a specific SSL/TLS connection state. An attacker could exploit this vulnerability by establishing a SMART-SSL connection through the targeted device. The attacker would then send a crafted stream of SSL/TLS traffic. An exploit could allow the attacker to cause a DoS condition where WAN optimization could stop processing traffic for a short period of time. Cisco Bug IDs: CSCvb71133. |
| A vulnerability in the ingress UDP packet processing functionality of Cisco Virtualized Packet Core-Distributed Instance (VPC-DI) Software 19.2 through 21.0 could allow an unauthenticated, remote attacker to cause both control function (CF) instances on an affected system to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient handling of user-supplied data by the affected software. An attacker could exploit this vulnerability by sending crafted UDP packets to the distributed instance (DI) network addresses of both CF instances on an affected system. A successful exploit could allow the attacker to cause an unhandled error condition on the affected system, which would cause the CF instances to reload and consequently cause the entire VPC to reload, resulting in the disconnection of all subscribers and a DoS condition on the affected system. This vulnerability can be exploited via IPv4 traffic only. Cisco Bug IDs: CSCvc01665 CSCvc35565. |
| MACsec feature on Juniper Networks Junos OS 15.1X49 prior to 15.1X49-D100 on SRX300 series does not report errors when a secure link can not be established. It falls back to an unencrypted link. This can happen when MACsec is configured on ports that are not capable of MACsec or when a secure link can not be established. This can mislead customers into believing that a link is secure. On SRX 300 series devices, prior to 15.1X49-D100, MACsec was only supported on control and fabric ports of SRX340 and SRX345 devices. SRX300 and and SRX320 did not have any MACsec capable ports. Configuring MACsec on ports that were not MACsec capable would have resulted in this issue. Affected releases are Juniper Networks Junos OS 15.1X49 prior to 15.1X49-D100 on SRX300 series. |
| A vulnerability in Cisco WebEx Network Recording Player for WebEx Recording Format (WRF) files could allow an attacker to cause a denial of service (DoS) condition. An attacker could exploit this vulnerability by providing a user with a malicious WRF file via email or URL and convincing the user to open the file. A successful exploit could cause an affected player to crash, resulting in a DoS condition. This vulnerability affects Cisco WebEx Business Suite meeting sites, Cisco WebEx Meetings sites, and Cisco WebEx WRF players. Cisco Bug IDs: CSCve30294, CSCve30301. |
| A vulnerability in the Secure Sockets Layer (SSL) and Transport Layer Security (TLS) code of Cisco ASA Software could allow an unauthenticated, remote attacker to cause a reload of the affected system. The vulnerability is due to improper parsing of crafted SSL or TLS packets. An attacker could exploit this vulnerability by sending a crafted packet to the affected system. Note: Only traffic directed to the affected system can be used to exploit this vulnerability. This vulnerability affects systems configured in routed and transparent firewall mode and in single or multiple context mode. This vulnerability can be triggered by IPv4 and IPv6 traffic. A valid SSL or TLS session is needed to exploit this vulnerability. This vulnerability affects Cisco ASA Software running on the following products: Cisco ASA 1000V Cloud Firewall, Cisco ASA 5500 Series Adaptive Security Appliances, Cisco ASA 5500-X Series Next-Generation Firewalls, Cisco ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Cisco Adaptive Security Virtual Appliance (ASAv), Cisco Firepower 9300 ASA Security Module, Cisco ISA 3000 Industrial Security Appliance. Fixed versions: 8.4(7.31) 9.0(4.39) 9.1(7) 9.2(4.6) 9.3(3.8) 9.4(2) 9.5(2). Cisco Bug IDs: CSCuv48243. |
| The sanity_check_ckpt function in fs/f2fs/super.c in the Linux kernel before 4.12.4 does not validate the blkoff and segno arrays, which allows local users to gain privileges via unspecified vectors. |
| The check_allocations function in libass/ass_shaper.c in libass before 0.13.4 allows remote attackers to cause a denial of service (memory allocation failure) via unspecified vectors. |
| A vulnerability in Cisco Meeting Server versions prior to 2.2.2 could allow an authenticated, remote attacker to cause the system to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to video calls being made on systems with a particular configuration. An attacker could exploit this by knowing a valid URI that directs to a Cisco Meeting Server. An attacker could then make a video call and cause the system to reload. Cisco Bug IDs: CSCve65931. |
| drivers/media/usb/dvb-usb-v2/lmedm04.c in the Linux kernel through 4.13.11 allows local users to cause a denial of service (general protection fault and system crash) or possibly have unspecified other impact via a crafted USB device, related to a missing warm-start check and incorrect attach timing (dm04_lme2510_frontend_attach versus dm04_lme2510_tuner). |
| A vulnerability in the H.264 decoder function of Cisco Meeting Server could allow an unauthenticated, remote attacker to cause a Cisco Meeting Server media process to restart unexpectedly when it receives an illegal H.264 frame. The vulnerability is triggered by an H.264 frame that has an invalid picture parameter set (PPS) value. An attacker could exploit this vulnerability by sending a malformed H.264 frame to the targeted device. An exploit could allow the attacker to cause a denial of service (DoS) condition because the media process could restart. The media session should be re-established within a few seconds, during which there could be a brief interruption in service. Cisco Bug IDs: CSCvg12559. |
| IBM QRadar 7.2 could allow a remote attacker to consume all resources on the server due to not properly restricting the size or amount of resources requested by an actor. IBM Reference #: 1999556. |
| The validateSignature method in the SAML2\Utils class in SimpleSAMLphp before 1.14.10 and simplesamlphp/saml2 library before 1.9.1, 1.10.x before 1.10.3, and 2.x before 2.3.3 allows remote attackers to spoof SAML responses or possibly cause a denial of service (memory consumption) by leveraging improper conversion of return values to boolean. |
| The Debian initrd script for the cryptsetup package 2:1.7.3-2 and earlier allows physically proximate attackers to gain shell access via many log in attempts with an invalid password. |
| A vulnerability in the TCP state machine of Cisco RF Gateway 1 devices could allow an unauthenticated, remote attacker to prevent an affected device from delivering switched digital video (SDV) or video on demand (VoD) streams, resulting in a denial of service (DoS) condition. The vulnerability is due to a processing error with TCP connections to the affected device. An attacker could exploit this vulnerability by establishing a large number of TCP connections to an affected device and not actively closing those TCP connections. A successful exploit could allow the attacker to prevent the affected device from delivering SDV or VoD streams to set-top boxes. Cisco Bug IDs: CSCvf19887. |
