| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
iio: accel: kionix-kx022a: Fix array boundary check
The driver performs a sanity check for an array size, when converting a
register value to an array index. The check incorrectly accepts the
sizeof(array) as a last index, when last valid index should be
sizeof(array) - 1.
Fix the check by bailing out when index >= sizeof(array). |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: caiaq: unregister the input device when probe fails
setup_card() registers the input device, whose name and phys point into
struct snd_usb_caiaqdev, and then goes on to snd_card_register() and
snd_usb_caiaq_control_init(). If either fails, snd_probe() calls
snd_card_free(), which frees the device state but leaves the input
device registered: card_free() only clears the pointer, and the input
device is unregistered from snd_disconnect() alone. Reading its "uevent"
attribute afterwards dereferences freed memory:
BUG: KASAN: slab-use-after-free in string+0x4a9/0x4f0
Read of size 1 at addr ffff8880208f5043 by task caiaq/4967
add_uevent_var+0x183/0x3a0
input_dev_uevent+0x162/0x900
dev_uevent+0x2f1/0x870
uevent_show+0x1ca/0x3a0
...
Unregister the input device on the probe error path, as
snd_disconnect() does. snd_usb_caiaq_input_disconnect() is a no-op when
no input device was registered.
Reproduced with a raw-gadget Audio Kontrol 1 and a temporary hack that
makes snd_usb_caiaq_control_init() fail. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: clear post-EOF pagecache when extending a file via write
Fix netfs to erase the contents of a hole created after the EOF by an
ordinary write if dirty data has been previously left there by writes
through an mmapped region. Neither the buffered nor the unbuffered/DIO
write path clears that stale pagecache.
Zero the tail of the folio straddling the EOF before an extending
write. That is the only folio that can hold data written past the EOF
through an mmap, as pages wholly beyond the EOF can't be faulted in.
The folio is zeroed rather than dropped so a concurrent extending write
can't lose data.
Both write paths downgrade the i_rwsem to shared, so extending writes
can run concurrently and the i_size read by the caller may be stale by
the time the folio is locked. Re-read i_size under the folio lock and
clamp the zeroed range up to it, so a racing write that already put
data into the folio isn't clobbered.
Wait for any writeback on the folio to finish before zeroing it so that
the pagecache isn't modified while it may still be read by the transport
during transmission. Honour IOCB_NOWAIT by returning -EAGAIN rather
than blocking on the folio lock, on writeback, or in folio_mkclean()'s
rmap walk when the folio is mapped.
truncate_pagecache() can't be used here: it must be called with the
i_rwsem held exclusively, but these write paths only hold it shared,
and it would block unconditionally, breaking IOCB_NOWAIT.
Callers that hold i_rwsem exclusively for the whole resize (truncate,
setattr, fallocate, clone) exclude any genuine concurrent buffered
writer, so staleness can instead be decided from the folio's dirty
state, as pagecache_isize_extended() already does for filesystems that
serialise writes against truncate/setattr via a single i_rwsem.
Export netfs_clear_stale_post_isize() helper to handle such case.
The helper is required by the CIFS client to fix generic/363. |
| In the Linux kernel, the following vulnerability has been resolved:
rtc: ac100: Assign .num before accessing .hws
Commit f316cdff8d67 ("clk: Annotate struct clk_hw_onecell_data with
__counted_by") annotated the hws member of 'struct clk_hw_onecell_data'
with __counted_by, which informs the bounds sanitizer (UBSAN_BOUNDS)
about the number of elements in .hws[], so that it can warn when .hws[]
is accessed out of bounds. As noted in that change, the __counted_by
member must be initialized with the number of elements before the first
array access happens, otherwise there will be a warning from each access
prior to the initialization because the number of elements is zero.
This occurs in ac100_rtc_register_clks() due to .num being assigned only
after every clkout clock has been stored in .hws[]. With
CONFIG_UBSAN_BOUNDS and a compiler that implements __counted_by (GCC
15.1+ or Clang 20.1+), this triggers an array-index-out-of-bounds report
during probe, and with CONFIG_UBSAN_TRAP the first store traps.
Initialize .num with AC100_CLKOUT_NUM, the number of elements .hws[] was
allocated with, right after the allocation. That is the value the loop
counter ends up at on the success path anyway, so the provider's
behaviour is unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_flow_offload: drop flowtable reference on init error path
nft_flow_offload_init() bumps the flowtable use count with
nft_use_inc() before calling nf_ct_netns_get(). When the latter
fails, the error is returned as-is and the reference is leaked.
The upper layers do not balance it either: nf_tables_newexpr()
clears expr->ops when the expression init callback fails, so the
nft_expr_more() iteration in nft_rule_expr_deactivate() and
nf_tables_rule_destroy() stops right before the failed expression
and its ->destroy callback, which would drop the reference, never
runs.
Each failed rule addition therefore leaks one flowtable reference
and the flowtable can no longer be removed: NFT_MSG_DELFLOWTABLE
keeps reporting -EBUSY even though no rule references it.
Save the nf_ct_netns_get() return value and undo the nft_use_inc()
when it fails, restoring the inc/dec pairing within
nft_flow_offload_init() itself. |
| In the Linux kernel, the following vulnerability has been resolved:
net: gso: limit recursive IP-in-IP segmentation
IP-in-IP GSO can re-enter inet_gso_segment() or ipv6_gso_segment()
for each nested IP header. encap_level tracks header bytes, not callback
depth, so a deep chain can exhaust the kernel stack. Making
inet_gso_segment() stackable introduced unbounded IPv4 nesting; IPIP
GSO/TSO later made the path reachable. The IPv6 stackable path was
introduced separately and uses the same guard.
Count IPv4 and IPv6 GSO handler entries in skb_gso_cb, initialized once
per top-level GSO operation and preserved across GRE/UDP context changes.
Use the existing IP_TUNNEL_RECURSION_LIMIT for both handlers. The first
five entries pass, and the sixth returns -EINVAL before dispatching
another GSO callback. |
| A flaw was found in the clevis PKCS#11 pin. The clevis-luks-pkcs11-askpin script writes the PKCS#11 token PIN in plaintext to a file without setting restrictive permissions. Under the default process umask, the file is world-readable. Additionally, the PIN file is not reliably cleaned up if the decryption script exits early, leaving the PIN accessible indefinitely. |
| Missing Authorization vulnerability in Crocoblock JetFormBuilder jetformbuilder allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects JetFormBuilder: from n/a through 3.6.6. |
| Missing Authorization vulnerability in miniOrange WP OAuth Server miniorange-oauth-20-server allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects WP OAuth Server: from n/a through 6.4.0. |
| A flaw was found in the clevis PKCS#11 pin. The clevis-pkcs11-afunix-socket-unlock daemon logs LUKS disk encryption passphrases in plaintext to a log file. The log file is created without restrictive permissions, making it world-readable under the default process umask. A local attacker can read the log file to obtain the LUKS passphrase. |
| OW2 ASM 3.0 before 9.11 contains a quadratic memory allocation vulnerability in MethodWriter.computeMaxStackAndLocal() and computeAllFrames() when using COMPUTE_MAXS or COMPUTE_FRAMES. Attackers can supply a crafted class file with thousands of overlapping exception handlers, causing excessive Edge allocations and an OutOfMemoryError that crashes the JVM. |
| ClipBucket v5 through 5.5.3-#206 contains a reflected cross-site scripting vulnerability in admin_area/index.php that allows attackers to inject HTML via the val parameter in mode=add_todo. Attackers can lure a logged-in administrator into submitting a cross-site POST form without CSRF protection, executing script in the admin panel origin. |
| Gitea does not limit the length of the gitignores field accepted by repository-creation forms and the API. Repository initialization splits the field into template names, repeatedly reads the referenced templates, and buffers their contents in memory. An attacker who can create repositories can submit an oversized value to amplify template reads and memory use, impairing availability. |
| Janus WebRTC Server through 1.4.3 contains a path traversal vulnerability in the Record&Play plugin that allows unauthenticated attackers to write files outside recordings_path via the record request filename. Attackers can supply filenames with path separators to create or truncate files ending in -audio.mjr, -video.mjr or -data.mjr anywhere the Janus process can write outside protected folders. |
| Discourse is an open-source discussion platform. Prior to 2026.9.0, 2026.8.1, 2026.7.3, and 2026.1.9, oEmbed processing treated an entire attacker-controlled HTML fragment as trusted when the fragment contained an iframe whose source matched the configured allowlist. A user with posting permission who controlled a public webpage and its oEmbed response could combine an allowlisted iframe with unrelated sibling HTML or CSS, causing stored visual overlays or other styled content to appear in post content and enabling misleading or fraudulent user interfaces. Exploitation requires a posting account, control of the fetched webpage and oEmbed response, and an allowlisted iframe source. The issue affects content integrity but does not expose restricted data, disrupt availability, or require interaction with Discourse Content Security Policy. This issue is fixed in versions 2026.9.0, 2026.8.1, 2026.7.3, and 2026.1.9. |
| Discourse is an open-source discussion platform. Prior to 2026.9.0, 2026.8.1, 2026.7.3, and 2026.1.9, sites with secure uploads enabled did not reconcile existing upload security metadata when a previously public category became read-restricted or when category permissions changed during a bulk import. Media and attachments uploaded while the category was public retained a public accessibility flag and remained reachable by anonymous users through their short upload URLs, including uploads associated with deleted topics. This issue is fixed in versions 2026.9.0, 2026.8.1, 2026.7.3, and 2026.1.9. |
| A cross-site scripting (XSS) vulnerability has been reported to affect QuFTP Service. If a remote attacker gains a user account, they can then exploit the vulnerability to inject malicious code.
We have already fixed the vulnerability in the following version:
QuFTP Service 1.4.6 and later
QuFTP Service 1.5.5 and later
QuFTP Service 1.6.5 and later |
| A flaw was found in device-mapper-multipath. A local user can trigger an out-of-bounds read by sending a command with a format string ending in a trailing percent character to the multipath daemon. This issue can allow the user to expose unintended daemon memory, leading to information disclosure, or cause the daemon to crash, resulting in a Denial of Service (DoS). |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: RFCOMM: free the skb when the DLC has no owner
rfcomm_recv_data() hands the skb to d->data_ready() and returns 0
without freeing it, so the callback owns the skb from that point on.
The tty implementation frees it when the DLC has been detached from its
device:
static void rfcomm_dev_data_ready(struct rfcomm_dlc *dlc,
struct sk_buff *skb)
{
struct rfcomm_dev *dev = dlc->owner;
if (!dev) {
kfree_skb(skb);
return;
}
The socket implementation returns without freeing it, and the skb is
leaked.
A connected DLC can have no owner: rfcomm_sock_destruct() clears
d->owner, while the DLC itself stays on the session until it is closed.
Data frames that arrive in that window still find d->state ==
BT_CONNECTED in rfcomm_recv_data() and are handed to the callback, one
leaked skb each.
The leak does not stop on its own either. The remote runs out of
credits only once RFCOMM_RX_THROTTLED is set, and for a socket the only
place that sets it is rfcomm_sk_data_ready() itself, below the return.
rfcomm_process_dlcs() keeps granting credits, so the remote keeps
sending and the leak keeps growing.
Free the skb, as the tty side does. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: Reject concurrent BIS listener setup
iso_sock_listen() drops the socket lock before calling iso_listen_bis()
to preserve the hdev->lock ordering. Two concurrent listen() calls on
the same broadcast socket can therefore both observe BT_BOUND. Caller
A can attach connA and release the locks, then caller B can acquire
them and attach connB before A publishes BT_LISTEN.
__iso_chan_add() checks whether connB already has a socket, but not
whether the socket already has a connection. The second attachment
overwrites iso_pi(sk)->conn, leaking the connA reference and leaving
connA->sk intact. Socket teardown follows connB, so later events on
connA can cause a stale socket access.
Recheck BT_BOUND and require iso_pi(sk)->conn to be NULL after taking
both the HCI device and socket locks in iso_listen_bis(). The connection
check also covers the interval between attachment and publication of
BT_LISTEN. Reject a competing setup with -EBADFD through the existing
unlock path before allocating another connection.
A recorded KASAN report from an instrumented kernel shows:
BUG: KASAN: slab-use-after-free in iso_sock_hold+0x119/0x1f0
Call Trace:
iso_sock_hold+0x119/0x1f0
iso_conn_del+0xe4/0x270
hci_disconn_complete_evt+0x351/0x8c0
hci_event_packet+0x71b/0xb20
hci_rx_work+0x293/0x730
Allocated by task 93:
sk_prot_alloc+0x113/0x220
sk_alloc+0x2b/0x6d0
bt_sock_alloc+0x29/0x370
iso_sock_alloc.constprop.0+0x19/0x300
iso_sock_create+0x94/0x100
Freed by task 93:
kfree+0x121/0x3c0
__sk_destruct+0x42b/0x540
iso_sock_release+0x29d/0x340
__sock_release+0xa1/0x260
sock_close+0x10/0x20 |
