| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Use after free in MediaStream in Google Chrome prior to 154.0.8037.97 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| Information leak in SVG in Google Chrome prior to 154.0.8037.97 allowed a remote attacker to obtain sensitive information via a crafted HTML page. (Chromium security severity: Medium) |
| Buffer overflow in WebRTC in Google Chrome prior to 154.0.8037.97 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| A sensitive information disclosure vulnerability exists in AOS-S. Successful exploitation could allow an unauthenticated remote attacker to access sensitive information. |
| A privilege escalation vulnerability exists in the API of AOS-S. Successful exploitation could allow an authenticated read-only user to escalate their privileges and gain administrative access to the affected system. |
| Buffer overflow vulnerabilities exist in the affected interface of AOS-S. Successful exploitation could allow an unauthenticated remote attacker to expose sensitive memory contents and cause a denial of service on the device. |
| An unauthenticated buffer overflow vulnerability exists in AOS-S. Successful exploitation could allow an unauthenticated adjacent attacker to expose sensitive memory contents and cause a denial of service on the affected device. |
| Memory corruption vulnerabilities exist in AOS-S that are reachable by an unauthenticated adjacent attacker. Successful exploitation could allow an attacker to execute arbitrary code. |
| Buffer overflow vulnerabilities exist in the affected interface of AOS-S. Successful exploitation could allow an unauthenticated remote attacker to execute arbitrary code. |
| A vulnerability have been identified in the management interface of AOS-S that could potentially allow an unauthenticated remote attacker to circumvent existing authentication controls if certain preconditions outside of the attacker's control are met. Successful exploitation could allow an attacker to gain unauthorized access to the affected system. |
| Authentication bypass vulnerabilities exist in the web management interface of AOS-S. Successful exploitation could allow an unauthenticated remote attacker to gain unauthorized access to the affected system. |
| Buffer overflow vulnerabilities exist in the affected interface of AOS-S. Successful exploitation could allow an authenticated remote attacker to cause a denial-of-service condition on the affected system. |
| Handlebars provides the power necessary to let users build semantic templates. From 4.0.0 until 4.7.10, Handlebars.precompile() uses quotedString() in lib/handlebars/compiler/code-gen.js to emit static template text into generated JavaScript without escaping sequences that terminate an enclosing HTML script element. When an application precompiles attacker-controlled template text and embeds the generated source directly in an inline script element, a closing script delimiter can end the element and cause following attacker-controlled markup to be parsed and executed. Ordinary server-side rendering and precompiled templates served as external JavaScript files are not affected. This issue is fixed in version 4.7.10. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: protect runlist updates with the runlist lock
ntfs_non_resident_attr_shrink() calls runlist helpers that require the
runlist write lock, but did not hold it while freeing clusters and
truncating the runlist. Serialize those operations and the resident
conversion with the runlist lock.
ntfs_attr_map_cluster() can merge a newly allocated run before updating
mapping pairs. If the update fails, free the clusters and restore both
the in-memory runlist and on-disk mapping pairs from a saved runlist.
Mark the volume in error if either rollback step fails. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_nat: unregister and release hooks on error
If nf_hook_entries_insert_raw() fails, the NAT hooks get never released,
resulting in a memleak.
Postpone setting nat_proto_net->nat_hook_ops when the hooks are
registered to simplify the error path to decide whether the nat hooks
need unwinding. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: get the wiphy out of a dying network namespace
When a network namespace is destroyed, cfg80211_pernet_exit() moves any
wiphy back to the initial namespace, and just warns if that fails. But
moving an interface can fail (due to allocation failures), and then the
wiphy is left behind with a garbage netns pointer:
Kernel mode fault at addr 0x30
genlmsg_multicast_netns.constprop.0+0x46/0xcf [cfg80211]
nl80211_notify_wiphy+0xcd/0xe8 [cfg80211]
wiphy_unregister+0x169/0x3fc [cfg80211]
Note that commit debac3a20dec ("net: Remove conflicting altnames for
dying netns in __dev_change_net_namespace().") fixed another path
that could reach it without allocation failures.
Remove interfaces that cannot be moved instead of failing the switch,
so that the wiphy always ends up in the initial namespace. In this
case the netdev core will unregister the interfaces anyway. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: unlist vifs when their netdev is unregistered
mac80211 only removes vifs from the local->interfaces list when
an interface is removed via ieee80211_if_remove(), before it
unregisters the netdev. However, it's possible for a netdev to
be unregistered without going through that: When the netns that
holds the wiphy is destroyed, the wiphy is supposed to move to
the init_ns, but that can run into allocation failures.
Then, mac80211 has an interface listed that doesn't exist, and
will eventually hit
BUG: failure at net/wireless/core.h:141/wiphy_to_rdev()!
...
_cfg80211_unregister_wdev+0x24/0x36a [cfg80211]
cfg80211_unregister_wdev+0x15/0x1d [cfg80211]
ieee80211_remove_interfaces+0x1ff/0x257 [mac80211]
ieee80211_unregister_hw+0x73/0x1d1 [mac80211]
mac80211_hwsim_del_radio+0x114/0x166 [mac80211_hwsim]
Remove the interface from the list in ->ndo_uninit if it's still
around to avoid this. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: only operate on TDLS peers in the TDLS code
ieee80211_tdls_oper() can operate on the AP station, which then
yields various warnings when the AP station is removed then or
at a later point in time after being confused for a TDLS peer.
Always check that the station is a TDLS peer. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: reset the LED state when ifup fails
When the first interface comes up, the radio LED is turned on. This can
start the TPT trigger timer, which continues running.
But if bringing up the interface fails then the timer keeps running and
won't be stopped by anything, eventually it can be freed:
ODEBUG: free active (active state 0) object: ffff888127e12130 object type: timer_list hint: tpt_trig_timer+0x0/0x300 net/mac80211/led.c:145
WARNING: CPU: 0 PID: 5923 at lib/debugobjects.c:612 debug_print_object+0x1a2/0x2b0
debug_check_no_obj_freed+0x4b7/0x600 lib/debugobjects.c:1129
kfree+0x436/0x670 mm/slub.c:6818
ieee80211_led_exit+0x162/0x1c0 net/mac80211/led.c:210
ieee80211_unregister_hw+0x27e/0x3a0 net/mac80211/main.c:1706
rt2x00lib_remove_dev+0x55b/0x670
Undo the LED state in the error path. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: reset state when starting AP fails
ieee80211_start_ap() can set enable_beacon (and beacon_int) and fail
later, leaving it set forever. Scanning can then attempt to restore
beaconing on such an interface, leading to:
Oops: divide error: 0000 [#1] SMP KASAN NOPTI
RIP: 0010:mac80211_hwsim_link_info_changed+0xca7/0xf00
Call Trace:
drv_link_info_changed+0x413/0x860 net/mac80211/driver-ops.c:495
ieee80211_link_info_change_notify+0x24b/0x3c0 net/mac80211/main.c:427
ieee80211_offchannel_return+0x381/0x580 net/mac80211/offchannel.c:160
__ieee80211_scan_completed+0x993/0xe30 net/mac80211/scan.c:519
ieee80211_scan_work+0x472/0x2010 net/mac80211/scan.c:1193
cfg80211_wiphy_work+0x2b7/0x550 net/wireless/core.c:538
in hwsim. Also, cfg80211 then allows changing the interface type,
and the off-channel path getgs confused about beaconing as well,
leading to another warning:
WARNING: net/mac80211/driver-ops.c:468 at drv_link_info_changed+0x583/0x880
ieee80211_link_info_change_notify+0x24b/0x3c0 net/mac80211/main.c:427
ieee80211_offchannel_stop_vifs+0x328/0x5c0 net/mac80211/offchannel.c:122
ieee80211_start_sw_scan net/mac80211/scan.c:583 [inline]
__ieee80211_start_scan+0xfb6/0x1af0 net/mac80211/scan.c:882
Reset the state on failures to always have it correct. |
