| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
irqchip/ts4800: Fix missing chained handler cleanup on remove
The driver installs a chained handler for the parent interrupt during probe
using irq_set_chained_handler_and_data(), but the remove function does not
clear this handler. This leaves a dangling handler that may be called when
the parent interrupt fires after the driver has been removed, potentially
accessing freed memory and causing a kernel crash.
Additionally, the parent_irq obtained via irq_of_parse_and_map() is not
stored, making it inaccessible in the remove function. Moreover, interrupt
mappings created during probe are not properly disposed.
Fix this by:
- Saving parent_irq in probe
- Clearing the chained handler with NULL in ts4800_ic_remove()
- Disposing all IRQ mappings before domain removal to prevent resource
leaks |
| In the Linux kernel, the following vulnerability has been resolved:
tracing/fprobe: Fix NULL pointer dereference in fprobe_fgraph_entry()
fprobe_fgraph_entry() sizes a shadow-stack reservation in one walk of
the per-ip fprobe list and fills it in a second walk, both under
rcu_read_lock() only. A fprobe registered on an already-live ip can
become visible between the two walks, so the fill walk processes an
exit_handler the sizing walk did not count and used runs past
reserved_words. If the sizing walk counted nothing, fgraph_data is NULL
and the first write_fprobe_header() faults:
Oops: general protection fault, probably for non-canonical address ...
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:fprobe_fgraph_entry+0xa38/0xf10 kernel/trace/fprobe.c:167
Call Trace:
<TASK>
function_graph_enter_regs+0x44c/0xa10 kernel/trace/fgraph.c:677
ftrace_graph_func+0xc5/0x140 arch/x86/kernel/ftrace.c:671
__kernel_text_address+0x9/0x40 kernel/extable.c:78
arch_stack_walk+0x117/0x170 arch/x86/kernel/stacktrace.c:26
kmem_cache_free+0x188/0x580 mm/slub.c:6378
tcp_data_queue+0x18d/0x6550 net/ipv4/tcp_input.c:5590
[...]
</TASK>
The list cannot be frozen across the two walks, so skip a node that does
not fit the reservation and count it as missed. |
| In the Linux kernel, the following vulnerability has been resolved:
net: phy: sfp: free mii_bus in sfp_i2c_mdiobus_destroy
sfp_i2c_mdiobus_create() allocates the I2C MDIO bus with mdio_i2c_alloc(),
a plain (non-devm) allocation, and registers it. sfp_i2c_mdiobus_destroy()
only unregisters the bus and clears sfp->i2c_mii without calling
mdiobus_free(). As the only reference to the bus is then cleared, the
struct mii_bus is leaked.
This is hit whenever a copper/RollBall SFP module that instantiated an MDIO
bus is removed: sfp_sm_main() takes the global teardown path and calls
sfp_i2c_mdiobus_destroy(). sfp_cleanup(), on driver unbind, frees
sfp->i2c_mii directly, which is why the leak only triggered on module
hot-removal and not on unbind.
Free the bus in sfp_i2c_mdiobus_destroy() to match the allocation done in
sfp_i2c_mdiobus_create(). |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/region: Fill first free targets[] slot during auto-discovery
Any invalid endpoint decoder pointer in the target array of an active
region is not allowed by cxl driver. This means cxl driver always
assumes the first p->nr_targets entries of the target array in an
auto-assembly region are valid. However, there are scenarios that could
leave NULL endpoint decoder pointer holes in the target array.
1. When cxl_cancel_auto_attach() removes an endpoint decoder from a
target array, the target slot is set to NULL. If the removed endpoint
decoder is not the last element in the target array, the target array
will contain a NULL hole.
2. When a auto-assembly region removes an assigned endpoint decoder, if
the removed endpoint decoder is not the last element in the target
array, always remains a NULL hole in the target array.
When a NULL pointer hole exists in a region's target array, it
introduces two potential problems:
1. Access an endpoint decoder via a NULL pointer. it always trigger
calltrace like that.
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000008: 0000 [#1] SMP KASAN PTI
RIP: 0010:cxl_calc_interleave_pos+0x26/0x810 [cxl_core]
Call Trace:
<TASK>
cxl_region_attach+0xc50/0x2140 [cxl_core]
cxl_add_to_region+0x321/0x2330 [cxl_core]
discover_region+0x92/0x150 [cxl_port]
device_for_each_child+0xf3/0x170
cxl_port_probe+0x150/0x200 [cxl_port]
cxl_bus_probe+0x4f/0xa0 [cxl_core]
really_probe+0x1c8/0x960
__driver_probe_device+0x323/0x450
driver_probe_device+0x45/0x120
__device_attach_driver+0x15d/0x280
bus_for_each_drv+0x10f/0x190
2. Not having enough valid endpoint decoders attached to an
auto-assembly region. if an auto-assembly region is created with lock
flag or assigned endpoint decoder with lock flag, which means
assigned endpoint decoder will not be reset during detaching, they
could re-attach to the auto-assembly region again. But cxl region
driver relies on p->nr_targets to verify whether the required number
of endpoint decoders has been attached, and NULL endpoint decoder
pointers are still counted in that case.
To fix above issues, adjust cxl_region_attach_auto() logic to find the
first free target slot for endpoint decoder attachment, this ensures
NULL holes in the target array are filled, rather than adding new
endpoint decoders at the tail of the target array. |
| In the Linux kernel, the following vulnerability has been resolved:
net: dsa: sja1105: round up PTP perout pin duration
pin_duration is converted from the user-provided period to SJA1105
clock ticks and is later passed as the cycle_time argument to
future_base_time().
Very small period values may become zero after the conversion,
which can lead to a division by zero in future_base_time().
Round zero pin_duration up to 1 tick so that the smallest unsupported
periods use the minimum non-zero hardware duration instead of passing
zero to future_base_time(). |
| In the Linux kernel, the following vulnerability has been resolved:
regcache: Do not overwrite error code when finalizing cache after error
During regcache initialization, if an error occurs in the
cache_ops->populate callback, and if cache operations include an exit
callback, the error code from populate() is overwritten with the return
value from exit(). This hides the error condition from the caller of
regcache_init(), and can cause NULL pointer dereferences when the regcache
is later accessed. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: sch_hfsc: Don't make class passive twice
update_vf() is called from two places for the same class during a single
dequeue when the class's child qdisc (e.g. codel/fq_codel) drops its last
packets while dequeuing:
1. The child calls qdisc_tree_reduce_backlog(), which, now that the child
is empty, invokes hfsc_qlen_notify() -> update_vf(cl, 0, 0) and turns
the class passive (cl_nactive is decremented up the hierarchy).
2. hfsc_dequeue() then calls update_vf(cl, qdisc_pkt_len(skb), cur_time)
to charge the dequeued bytes.
On the second call the class is already passive, but its child qdisc is
still empty, so update_vf() arms go_passive again:
if (cl->qdisc->q.qlen == 0 && cl->cl_flags & HFSC_FSC)
go_passive = 1;
The leaf is then skipped by the cl_nactive == 0 check inside the loop,
which does not clear go_passive, so the stale go_passive propagates to the
parent and decrements its cl_nactive a second time. A parent that still
has other active children is driven to cl_nactive == 0 and removed from
the vttree, even though those siblings are still backlogged. They are
never dequeued again and the qdisc stalls.
Fix this by only arming go_passive when the class is actually active, so an
already-passive class no longer triggers a second passive transition. The
byte accounting (cl->cl_total += len) still runs for every ancestor, so
dequeued bytes continue to be counted exactly once. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_ct: fix nf_connlabels leak on two error paths
tcf_ct_fill_params() calls nf_connlabels_get() (setting put_labels) when
TCA_CT_LABELS is present, but two later error sites use a bare return
instead of "goto err", skipping the err: nf_connlabels_put() cleanup.
They also precede the "p->put_labels = put_labels" assignment, so the
tcf_ct_params_free() fallback does not release the count either. Each
failed RTM_NEWACTION on these paths leaks one nf_connlabels reference:
net->ct.labels_used is incremented and never released. The action is
reachable with CAP_NET_ADMIN over the netns, i.e. from an unprivileged
user namespace on default-userns kernels.
Impact: an unprivileged user with CAP_NET_ADMIN over a network namespace
(e.g. via user namespaces) leaks one nf_connlabels reference per failed
RTM_NEWACTION on the two error paths; net->ct.labels_used is never
released.
The err: label is safe to reach from both sites: p->tmpl is still NULL
there (kzalloc'd, not yet assigned) and nf_ct_put(NULL) is a no-op, so
no inline release is needed. |
| In the Linux kernel, the following vulnerability has been resolved:
tpm_crb: Check ACPI_COMPANION() against NULL during probe
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_COMPANION() check against NULL to the
tpm_crb driver. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_meta_bridge: fix NFT_META_BRI_IIFPVID stack leak
This needs to test for nonzero retval. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid1: free r1_bio when REQ_NOWAIT is set and read would block on retry
When a read is retried, raid1_read_request() may be called with a
pre-allocated r1_bio. If wait_read_barrier() fails for a REQ_NOWAIT
read, the bio is completed and the function returns immediately. In this
case the existing r1_bio is leaked.
This fixes a leak of pre-allocated r1_bio structures for retried reads. |
| In the Linux kernel, the following vulnerability has been resolved:
ieee802154: fix kernel-infoleak in dgram_recvmsg()
KMSAN reported a kernel-infoleak in move_addr_to_user():
BUG: KMSAN: kernel-infoleak in instrument_copy_to_user
include/linux/instrumented.h:131 [inline]
BUG: KMSAN: kernel-infoleak in _inline_copy_to_user
include/linux/uaccess.h:205 [inline]
BUG: KMSAN: kernel-infoleak in _copy_to_user+0xcc/0x120
lib/usercopy.c:26
instrument_copy_to_user include/linux/instrumented.h:131 [inline]
_inline_copy_to_user include/linux/uaccess.h:205 [inline]
_copy_to_user+0xcc/0x120 lib/usercopy.c:26
copy_to_user include/linux/uaccess.h:236 [inline]
move_addr_to_user+0x2e7/0x440 net/socket.c:302
____sys_recvmsg+0x232/0x610 net/socket.c:2925
...
Uninit was stored to memory at:
ieee802154_addr_to_sa include/net/ieee802154_netdev.h:369 [inline]
dgram_recvmsg+0xa09/0xbe0 net/ieee802154/socket.c:739
The issue occurs because the `pan_id` field of `struct ieee802154_addr`
is left uninitialized when the address mode is `IEEE802154_ADDR_NONE`.
The execution flow is as follows:
1. `__ieee802154_rx_handle_packet()` declares a local `struct
ieee802154_hdr hdr` on the stack.
2. `ieee802154_hdr_pull()` calls `ieee802154_hdr_get_addr()` to parse
the source and destination addresses into this structure.
3. If the address mode is `IEEE802154_ADDR_NONE`,
`ieee802154_hdr_get_addr()` previously only set the `mode` field,
leaving the `pan_id` field containing uninitialized stack memory.
4. This uninitialized `pan_id` is later copied into a `struct
sockaddr_ieee802154` in `dgram_recvmsg()` via `ieee802154_addr_to_sa()`.
5. Finally, `move_addr_to_user()` copies the socket address structure to
user space, leaking the uninitialized bytes.
Fix this by using `memset` to zero out the address structure in
`ieee802154_hdr_get_addr()` when the mode is `IEEE802154_ADDR_NONE`. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: Kill MIDI 2.0 URBs before freeing endpoints
MIDI 2.0 input URBs are started during snd_usb_midi_v2_create(). A
later setup failure can still jump to snd_usb_midi_v2_free(), which
currently frees each endpoint and its coherent URB buffers without first
stopping the submitted URBs. A completion can then dereference the
embedded URB context and endpoint state after they have been freed, or
try to resubmit from the stale endpoint.
This was observed as a KASAN slab-use-after-free in
input_urb_complete().
The buggy scenario involves two paths, with each column showing the order
within that path:
probe error path: USB completion path:
1. start_input_streams() submits 1. The HCD still owns a
input URBs. submitted input URB.
2. A later setup helper returns 2. input_urb_complete() runs
an error. with urb->context in ep.
3. snd_usb_midi_v2_free() frees 3. The completion reads ep
endpoint storage and URB buffers. state and can requeue URBs.
Make the endpoint destructor follow the same teardown ordering used for
disconnect when the endpoint has not already been disconnected: publish
ep->disconnected, kill the URBs synchronously, and drain the endpoint
before freeing URB buffers and endpoint storage. The guard avoids
repeating the stop sequence after the normal
snd_usb_midi_v2_disconnect_all() path, while still synchronizing the
direct MIDI 2.0 create-error free path.
Validation reproduced this kernel report:
BUG: KASAN: slab-use-after-free in input_urb_complete+0x37/0x1b0
Workqueue: usb_hub_wq hub_event
RIP: 0010:_raw_spin_unlock_irq+0x2e/0x50
Read of size 8
Call trace:
dump_stack_lvl+0x77/0xb0
print_report+0xce/0x5f0
input_urb_complete+0x37/0x1b0 (sound/usb/midi2.c:186)
srso_alias_return_thunk+0x5/0xfbef5
__virt_addr_valid+0x19f/0x330
kasan_report+0xe0/0x110
__usb_hcd_giveback_urb+0x112/0x1d0
dummy_timer+0xaaa/0x19a0
lock_is_held_type+0x9a/0x110
__lock_acquire+0x467/0x28b0
mark_held_locks+0x40/0x70
_raw_spin_unlock_irqrestore+0x44/0x60
lockdep_hardirqs_on_prepare+0xbb/0x1a0
__hrtimer_run_queues+0x101/0x520
hrtimer_run_softirq+0xd0/0x130
handle_softirqs+0x15b/0x670
__irq_exit_rcu+0xd0/0x170
irq_exit_rcu+0xe/0x20
sysvec_apic_timer_interrupt+0x6c/0x80
asm_sysvec_apic_timer_interrupt+0x1a/0x20 |
| In the Linux kernel, the following vulnerability has been resolved:
net: mana: initialize gdma queue id to INVALID_QUEUE_ID
mana_gd_create_mana_wq_cq() leaves queue->id as 0 (from kzalloc_obj())
until mana_create_wq_obj() assigns the firmware-returned id. If creation
fails before that, cleanup calls mana_gd_destroy_cq() with id 0, NULLing
gc->cq_table[0] and silently breaking whichever real CQ owns that slot.
Initialize queue->id to INVALID_QUEUE_ID right after allocation, matching
mana_gd_create_eq(). The existing (id >= max_num_cqs) guard then
short-circuits cleanly. |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/region: Block region delete during region creation
Expand the range lock, rename it "regions_lock", to disable region deletion
in the critical period between construct_region() and attach_target(), as
well as the period between device_add() and registering the remove actions.
Otherwise, userspace can confuse the kernel. It can violate the assumption
the region stays registered through the completion of cxl_add_to_region().
It can violate the assumption that devm_add_action_or_reset() is working
with a live 'struct cxl_region'.
It is ok for the region to disappear outside of those windows as that
mirrors device hotplug flows where the proper locks are held. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: seq: Fix kernel heap address leak in bounce_error_event()
The comment above bounce_error_event() documents that user clients
should receive SNDRV_SEQ_EVENT_BOUNCE with the original event embedded
as variable-length data, while kernel clients should receive
SNDRV_SEQ_EVENT_KERNEL_ERROR with a quoted kernel pointer.
However, the implementation unconditionally uses
SNDRV_SEQ_EVENT_KERNEL_ERROR with data.quote.event set to the raw
struct snd_seq_event pointer for all clients. When a bounce error
event is delivered to a USER_CLIENT via snd_seq_read(), the kernel
heap address in data.quote.event is exposed to userspace through
copy_to_user() in the fixed-length branch.
This is a distinct leak path from the one addressed by commit
705dd6dcbc0e ("ALSA: seq: Clear variable event pointer on read"),
which sanitizes data.ext.ptr in the variable-length branch of
snd_seq_read(). The bounce_error_event() leak uses fixed-length
events that take the else branch where no sanitization occurs.
Differentiate the bounce event by client type. For USER_CLIENT,
send SNDRV_SEQ_EVENT_BOUNCE with SNDRV_SEQ_EVENT_LENGTH_VARIABLE
and data.ext pointing to the original event. The variable-length
path in snd_seq_event_dup() copies the event data into chained
cells, and snd_seq_expand_var_event() copies only the content --
never the pointer -- to userspace. For KERNEL_CLIENT, keep the
existing SNDRV_SEQ_EVENT_KERNEL_ERROR behavior with the quoted
pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
net: pfcp: allocate per-cpu tstats for PFCP netdevs
PFCP uses dev_get_tstats64() as its ndo_get_stats64 callback, but
pfcp_link_setup() does not request NETDEV_PCPU_STAT_TSTATS. The net
core therefore leaves dev->tstats NULL for PFCP devices.
Creating a PFCP rtnetlink device can immediately ask the new netdev for
stats while building the RTM_NEWLINK notification. That reaches
dev_get_tstats64() and dereferences the NULL dev->tstats pointer.
Set pcpu_stat_type to NETDEV_PCPU_STAT_TSTATS during PFCP link setup so
the net core allocates the storage expected by dev_get_tstats64(). |
| A vulnerability was found in SourceCodester Online Book Store System 1.0. This vulnerability affects unknown code of the file /admin/index.php?page=site_settings of the component System Settings Module. The manipulation results in cross site scripting. The attack can be executed remotely. The exploit has been made public and could be used. |
| A vulnerability has been found in SourceCodester Online Clothing Store 1.0. This affects an unknown part of the file /db/shopping.sql of the component SQL Database Backup. The manipulation leads to files or directories accessible. Remote exploitation of the attack is possible. The exploit has been disclosed to the public and may be used. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fail policy unpack on accept2 allocation failure
unpack_pdb() may need to allocate a missing ACCEPT2 table for older policy
data. If that allocation failed, it set an error message but jumped to the
success path, returning a policydb with the required table missing.
Return -ENOMEM through the normal failure path when the ACCEPT2 allocation
fails. Remove the now-unused out label. |
