| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ima: Check for ERR_PTR from dentry_path() in validate_hash_algo()
dentry_path() returns ERR_PTR(-ENAMETOOLONG) when the path exceeds the
buffer. validate_hash_algo() passes the result straight to
integrity_audit_msg() without checking. ERR_PTR is not NULL, so
integrity_audit_message() sees a valid pointer and calls strlen() on
it, which faults:
BUG: unable to handle page fault for address: ffffffffffffffdc
RIP: 0010:strlen+0x30/0xa0
Call Trace:
audit_log_untrustedstring+0x19/0x30
integrity_audit_message+0x366/0x4f0
ima_inode_setxattr+0x512/0x5f0
Check for IS_ERR() and use NULL instead, which makes the audit message
skip the name= field instead of crashing. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/huge_memory: transfer the pmd dirty bit to the folio on zap
zap_huge_pmd_folio() propagates the pmd young bit to the folio for the
file case, but not the dirty bit. The pte path does propagate it, in
zap_present_folio_ptes() and so does the pmd split path, in
__split_huge_pmd_locked().
For most file mappings the omission is harmless, because writing to a
shared file mapping goes through page_mkwrite(), which dirties the folio.
tmpfs is different: it has no page_mkwrite(), and vma_wants_writenotify()
is false for it, so a *read* fault on a MAP_SHARED tmpfs mapping installs
a writable pmd via do_read_fault(). do_read_fault() does not call
fault_dirty_shared_page(), so subsequent stores through that mapping set
only the hardware dirty bit in the pmd and never call folio_mark_dirty().
A shmem folio allocated by a fault is marked uptodate but not dirty (see
the clear: block in shmem_get_folio_gfp()), so PG_dirty is never set at
all.
Unmapping such a folio - munmap(), or exit_mmap() when the process dies -
then loses the only record that it was written, because zap_huge_pmd()
drops the pmd without transferring the dirty bit. Reclaim afterwards sees
a clean shmem folio: the whole swap-out block in shrink_folio_list() is
inside "if (folio_test_dirty(folio))", so pageout() is skipped and the
folio falls into __remove_mapping(). There, folio_is_file_lru() is false
for a swapbacked folio, so no shadow entry is created and
__filemap_remove_folio(folio, NULL) simply empties the i_pages slot. The
data is freed without ever being written to swap, and the next fault on
that index returns a freshly zeroed folio.
This is silent data loss for any process that keeps state in a MAP_SHARED
tmpfs segment across an unmap - for example a cache handed from one
process generation to the next through /dev/shm. It requires the folio to
be PMD-mapped, so it only shows up once shmem THP is enabled (which is
what we did in Meta fleet and started noticing crashes); with THP off the
pte path transfers the dirty bit correctly. It also only becomes visible
when swap is enabled, because with no swap device shmem folios (which are
on the anon LRU) are not scanned by reclaim at all, so the clean folio is
never dropped.
Reproduced on x86_64 with a tmpfs mounted huge=within_size: read-fault a
2MB-backed region, write a known pattern through the resulting mapping,
munmap, force reclaim of the cgroup, then re-map and read back. Without
this patch the region reads back as zeros and vmstat shows zswpout 0 - the
data was discarded rather than swapped. With this patch the region reads
back correctly and the pages are swapped out as expected. With
huge=never, or when the first touch is a write, the test passes either
way. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/x86/intel: Fix kernel address leakages in LBR stack
Before Arch LBR gained CPL filtering support, a user-only branch stack
could still contain kernel addresses. As a result, kernel branch records
may be exposed to user space even when PERF_SAMPLE_BRANCH_USER is
requested.
For example, on Intel Tiger Lake, the following command can still report
SYSRET/ERET entries with kernel-space from addresses:
$ ./perf record -e cycles:p -o - --branch-filter any,save_type,u -- \
./perf bench syscall basic --loop 1000 | \
./perf script -i - --fields brstack|tr ' ' '\n'| \
grep -E '0x[89a-f][0-9a-f]{15}'
Total time: 0.000 [sec]
0.219000 usecs/op
4,566,210 ops/sec
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.551 MB - ]
0xffffffff93c001c8/0x7f12a2b1d647/P/-/-/16959/SYSRET/-
0xffffffff93c001c8/0x7f12a2b1d5c2/P/-/-/17535/SYSRET/-
0xffffffff93c01928/0x7f12a2861000/P/-/-/6719/ERET/-
0xffffffff93c01928/0x7f12a297a000/P/-/-/8575/ERET/-
The problem is that intel_pmu_lbr_filter() does not fully validate the
privilege level of sampled entries. It filters some mismatches based on
the branch type and the to address, but it does not reject entries whose
from address violates the requested branch privilege filter.
Fix this by extending software filtering to validate both from and to
addresses against br_sel. Any LBR entry contains kernel address does not
match the requested user filter is dropped. This prevents kernel
addresses from appearing in user-only branch stacks. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: core: fix debugfs UAF on adapter removal
i2c_del_adapter() frees the adapter's debugfs directory before it
unregisters the adapter device, but the new_device sysfs attribute
stays writable until device_del(). A write racing with removal still
reaches i2c_device_probe(), which passes the freed adap->debugfs to
debugfs_create_dir() as the new client's parent:
BUG: KASAN: slab-use-after-free in lookup_noperm_common+0x407/0x430
Read of size 4 at addr ffff88803ef87810 by task syz.0.61/6090
lookup_noperm_common+0x407/0x430
simple_start_creating+0x9c/0x110
debugfs_start_creating+0xdb/0x1a0
debugfs_create_dir+0x24/0x350
i2c_device_probe+0x814/0xbf0
It's technically possible to create a client after i2c_deregister_clients
has run. That client will never be unregistered and make
wait_for_completion hang.
Close the window by removing the new_device attribute at the start of
i2c_del_adapter(). device_remove_file() will drain any clients left. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: mux: Fix channel node leak on adapter add failure
i2c_mux_add_adapter() takes a reference to the Device Tree channel node
before registering the new adapter. If adapter registration fails, the
error path frees the private data without dropping that reference.
Release the channel node before freeing the private data. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: Don't read GMID_EL1 when MTE is disabled
__cpuinfo_store_cpu() gates the GMID_EL1 read on the raw
ID_AA64PFR1_EL1, so it reads the register even when the kernel has
disabled MTE (CONFIG_ARM64_MTE=n or arm64.nomte). KVM sets HCR_EL2.TID5
in that case, and pKVM injects an UNDEF the host cannot handle:
Internal error: Oops - Undefined instruction: 0000000002000000 [#1] SMP
pc : __cpuinfo_store_cpu+0xf4/0x264
Kernel panic - not syncing: Attempted to kill the idle task!
Only pKVM reaches it, and only after a CPU is offlined and brought back
online: its CPU_ON relay sets the host HCR before the CPU enters EL1,
while plain nVHE sets it at CPUHP_AP_KVM_ONLINE.
Gate the read on the CPU's own ID_AA64PFR1_EL1 with the command-line
override applied, and on CONFIG_ARM64_MTE, which no register reflects.
The boot CPU stores its registers before init_cpu_features() strips an
unsafe override, so clamp against the hardware value here too. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: return early from a zero-length flush
SYNC_BO does not constrain its size, so a request for zero bytes reaches
drm_clflush_virt_range(), which ends with an unconditional
clflushopt(end - 1). For an empty range that is the byte before the
mapping, and abo->mem.kva comes from vmap(), so the access lands in the
guard page below the vmalloc area and faults:
BUG: unable to handle page fault for address: ffffd16fbbc70fff
#PF: supervisor read access in kernel mode
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 7 UID: 1000 Comm: sync_bo_probe
RIP: 0010:drm_clflush_virt_range+0x3c/0x70
Call Trace:
amdxdna_drm_sync_bo_ioctl+0x124/0x430 [amdxdna]
drm_ioctl+0x301/0x4c0
__x64_sys_ioctl+0x115/0x2f0
do_syscall_64+0xa6/0x3d0
Any process that can open the render node can do this. Reproduced 3 of 3
times on a Strix Point NPU (1022:17f0), by calling SYNC_BO with size 0 on
an AMDXDNA_BO_SHARE object. The import arm takes the same request but
flushes the whole scatterlist, so it survives it.
Nothing needs flushing for an empty range, so answer before choosing a
path. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ethosu: check MMIO mapping errors in probe
devm_platform_ioremap_resource() returns an error pointer when the register
resource cannot be mapped. ethosu_probe() stores it and continues until
initialization dereferences it through MMIO accessors.
Return the mapping error before initializing the device. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ethosu: fix job completion fence cleanup
ethosu_ioctl_submit_job() allocates done_fence before validating buffer
handles. Errors after allocation call ethosu_job_err_cleanup(), which frees
the job but leaks the uninitialized fence.
A scheduler dependency error also lets ethosu_job_run() return before
dma_fence_init(). Normal cleanup then passes a zeroed refcount to
dma_fence_put().
Release done_fence in the common cleanup path and use
dma_fence_was_initialized() to distinguish initialized fences from raw
allocations.
[robh: also fix goto] |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-fabrics: fix DHCHAP secret leak on parse failure
nvmf_parse_options() duplicates dhchap_secret and dhchap_ctrl_secret
with match_strdup() before validating the DHHC-1: representation.
If validation fails, the parser returns -EINVAL before the temporary
string in p is assigned to opts->dhchap_secret or
opts->dhchap_ctrl_secret. nvmf_create_ctrl() subsequently frees opts,
but nvmf_free_options() cannot release the unassigned temporary string.
Each rejected option therefore leaks one allocation.
This is easy to miss because valid secrets transfer ownership to opts
and are freed normally, while the malformed-secret path still returns
the expected -EINVAL to userspace.
With CONFIG_NVME_HOST_AUTH enabled, the leak is reachable before the
required-option checks and transport lookup. No NVMe-oF target or
working transport connection is required; for example, repeatedly
writing
dhchap_secret=BAD
or
dhchap_ctrl_secret=BAD
to /dev/nvme-fabrics deterministically takes the leaking parse path.
Free the temporary string before leaving both validation error paths.
Use kfree_sensitive() because the copied option may contain secret
material even when its representation is rejected, matching the
sensitive cleanup used for stored DHCHAP secrets. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/hugetlb_cma: fix null nodemask dereference in hugetlb_cma_alloc_frozen_folio
alloc_buddy_hugetlb_folio_with_mpol() can pass a NULL nodemask to
alloc_fresh_hugetlb_folio() as a fallback to allocate from all nodes. If
order is gigantic, alloc_fresh_hugetlb_folio() propagates the NULL
nodemask down to hugetlb_cma_alloc_frozen_folio() via
alloc_gigantic_frozen_folio().
Additionally, hugetlb_cma_alloc_frozen_folio() previously attempted
allocation on hugetlb_cma[nid] without verifying if nid is included in the
caller's nodemask. Adding a node_isset(nid, *nodemask) check ensures the
initial preferred node allocation honors the memory policy / nodemask.
However, hugetlb_cma_alloc_frozen_folio() dereferences the nodemask in
node_isset(nid, *nodemask) and for_each_node_mask(node, *nodemask),
leading to a null pointer dereference kernel panic when nodemask is NULL.
Fix this by checking if nodemask is NULL in
hugetlb_cma_alloc_frozen_folio() and defaulting it to
cpuset_current_mems_allowed. Enclose the allocation attempts within the
cpuset seqcount retry loop so that if the cpuset changes concurrently
during allocation, the attempts are retried using the updated nodemask.
This ensures that the initial node check and fallback loop safely honor
the task's cpuset without violating cpuset constraints or causing NULL
pointer dereferences or unexpected allocation failures.
From a userspace perspective, this bug allows an unprivileged user to
crash the kernel (trigger a panic) by requesting a gigantic hugepage
allocation with MPOL_PREFERRED_MANY on a system where CMA is only
configured on a subset of NUMA nodes.
This can be reproduced by booting a VM with two NUMA nodes, restricting
CMA to Node 1 (e.g., hugetlb_cma=1:1G default_hugepagesz=1G hugepagesz=1G
hugepages=0), and running a program that allocates a 1GB hugepage area
without reserving, restricts allocation to Node 0 using mbind() with
MPOL_PREFERRED_MANY, and triggers a page fault:
void *ptr = mmap(NULL, 1UL << 30, PROT_READ | PROT_WRITE,
MAP_PRIVATE | MAP_ANONYMOUS | MAP_HUGETLB |
MAP_HUGE_1GB | MAP_NORESERVE, -1, 0);
unsigned long nodemask = 1; /* Node 0 */
mbind(ptr, 1UL << 30, MPOL_PREFERRED_MANY, &nodemask,
sizeof(nodemask) * 8, 0);
memset(ptr, 0, 1UL << 30); /* Trigger fault */
This results in a NULL pointer dereference:
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
Oops: Oops: 0000 [#1] SMP NOPTI
RIP: 0010:hugetlb_cma_alloc_frozen_folio+0x75/0x120
Call Trace:
<TASK>
only_alloc_fresh_hugetlb_folio.isra.0+0x2c/0x160
alloc_surplus_hugetlb_folio+0x6d/0x100
alloc_hugetlb_folio+0x3c5/0x660
hugetlb_no_page+0x3d9/0x650 |
| In the Linux kernel, the following vulnerability has been resolved:
parisc: eisa: Fix infinite loop when parsing invalid IRQ value
When an invalid value is passed via the "eisa_irq_edge=" kernel
command line parameter (e.g. "eisa_irq_edge=16,5"), eisa_irq_setup()
prints an error message and continues without advancing the current
position. As a result the same invalid value is parsed again and
again, causing an infinite loop while the kernel boots.
Advance to the next comma-separated entry, or stop parsing when there
is no next entry, before continuing so that the remaining entries are
processed normally. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/kexec_file: Fix null-ptr-def in extra size calculation
A static Sashiko AI review identified a potential NULL pointer
dereference in kexec_extra_fdt_size_ppc64().
On platforms without any reserved memory regions,
get_reserved_memory_ranges() can return 0 while leaving 'rmem'
unallocated as NULL. Passing it directly leads to a kernel panic when
evaluating 'rmem->nr_ranges'.
Add a NULL check for 'rmem' to prevent this crash. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/kexec_file: Prevent kexec range truncation
Sashiko AI review pointed out the following issue.
The __merge_memory_ranges() function incorrectly handles overlapping
memory ranges when merging them. Although sort_memory_ranges() sorts all
ranges by their start address in ascending order beforehand, the merge
logic remains defective in two ways:
1. It compares the current range's start against the previous element (i-1)
instead of the running target index (idx)
2. It unconditionally overwrites 'ranges[idx].end' with 'ranges[i].end'.
This logic flaw leads to critical memory truncation when a larger memory
range completely subsumes subsequent smaller ranges.
For example, consider a sorted input array with three ranges:
Range A (idx=0): [0x1000 - 0x9000]
Range B (i=1): [0x2000 - 0x5000] (completely inside Range A)
Range C (i=2): [0x6000 - 0x8000] (completely inside Range A)
1. When i=1 (Range B):
ranges[1].start (0x2000) <= ranges[0].end + 1 (0x9001) is TRUE.
The code executes: ranges[0].end = ranges[1].end, which erroneously
shrinks Range A's end from 0x9000 down to 0x5000.
2. When i=2 (Range C):
ranges[2].start (0x6000) <= ranges[1].end + 1 (0x5001) is FALSE.
The code falls into the else block, creating a broken new range.
As a result, valid memory fragments [0x5001 - 0x5fff] and [0x8001 - 0x9000]
are completely lost from the kexec exclude lists, potentially allowing
the crash kernel to overwrite active memory, causing data corruption
or crashes.
Fix this by ensuring the start of the current range is compared against the
end of the active merged range (idx), and use max() to safely prevent the
outer boundary from being truncated. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/vfio-ap: Fix dereference matrix_mdev->kvm without checking for NULL
The ap_driver structure has two fields which are function pointers to
callbacks:
* .on_config_changed: called at the start of the AP bus scan function to
notify the device driver that the host AP
configuration has changed and the associated AP
devices will be added or removed accordingly. This
gives the implementor a chance to evaluate the
configuration changes and respond to them before
the associated devices are added or removed.
* .on_scan_complete: Called at the end of the AP bus scan function to
notify the device driver that the host AP
configuration has changed and the AP devices have
been added or removed accordingly. This gives the
implementor the opportunity to respond to the
changes after the associated devices are added or
removed.
These two callbacks are implemented in the vfio_ap device driver via the
vfio_ap_on_cfg_changed and vfio_ap_on_scan_complete functions respectively.
Within the call stack of these two callback functions the
matrix_mdev->kvm->lock mutex is taken without checking whether
matrix_mdev->kvm is NULL or not. If matrix_mdev->kvm has never been set,
trying to take the lock will trigger a NULL pointer dereference. This patch
adds checks for matrix_mdev->kvm == NULL before taking the
matrix_mdev->kvm->lock mutex.
Note that the matrix_mdev->kvm->lock mutex taken in the
vfio_ap_mdev_hot_plug_config function is moved to the calling function
along with the matrix_dev->mdevs_lock which is needed there to access
the fields of the matrix_mdev. It makes little sense to make the change
the check for matrix_mdev->kvm there before taking the kvm->lock
mutex only to have to move it out via another patch, so it is done in
this patch.
It is important to make note of the following:
1. The matrix_dev->guests_lock is acquired at the start of both callback
functions. This ensures that matrix_mdev will not be removed via the
vfio_ap_mdev_remove function because it too takes matrix_dev_guests_lock
before removing the object; so, matrix_mdev will be available for the
duration of the callback functions.
2. The matrix_dev->mdevs_lock mutex must be taken in order to access
fields within the matrix_mdev structure
3. matrix_mdev->kvm->lock mutex must be taken before the
matrix_dev->mdevs_lock to prevent a lockdep splat.
4: The kvm->lock must be held while plugging the guest's AP configuration
into its SIE state description via the vfio_ap_mdev_update_guest_apcb
function.
5. The vfio_ap_mdev_update_guest_apcb checks matrix_mdev->kvm to verify it
is not NULL before doing the hot plug of the guest's AP configuration. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/vfio-ap: Fix missing lock required to access list of ap_matrix_mdev objects
In order to traverse or add/remove ap_matrix_mdev objects in the
matrix_dev->mdev_list, the matrix_dev->guests_lock mutex must be held.
There are two functions that access the list without holding the mutex:
vfio_ap_mdev_probe function
~~~~~~~~~~~~~~~~~~~~~~~~~~~
The vfio_ap_mdev_probe function uses the matrix_dev->mdevs_lock
mutex to guard the add of a newly created ap_matrix_mdev object to the
matrix_dev->mdev_list. This mutex does not protect list access; its purpose
is to guard against concurrent access to fields contained in an
ap_matrix_mdev object. This could lead to kernel memory corruption or
use-after-free if another mdev is created or removed concurrently.
The adding of an ap_matrix_mdev object to matrix_dev->mdev_list
is now guarded by the matrix_dev->guests_lock which is the correct
way to protect against concurrent mdev_list access.
Also removed the following two lines of code because the matrix_mdev is
allocated via vfio_alloc_device macro which uses kzalloc, so req_trigger
and cfg_chg_trigger are already zero-initialised when the struct is
allocated before the call to vfio_register_emulated_iommu_dev. This
prevents a window whereby these triggers are set to NULL after
the device is exposed to userspace.
matrix_mdev->req_trigger = NULL;
matrix_mdev->cfg_chg_trigger = NULL;
vfio_ap_mdev_for_queue function
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The status_show function that supports display of the status attribute of
the devices in /sys/bus/ap/devices calls the vfio_ap_mdev_for_queue
function which iterates the matrix_dev->mdev_list to find the object
representing the queue device whose status is to be displayed. In order to
traverse this list, the matrix_dev->guests_lock mutex must be held.
To fix this, the guests_lock mutex is taken prior to taking the
matrix_dev->mdevs_lock mutex in the status_show function. It is taken
there rather than the vfio_ap_mdev_for_queue function - where it is
needed - because it must be taken prior to the mdevs_lock mutex in order to
adhere to the proper locking order and prevent a lockdep splat; also
because the mdevs_lock is needed there to access fields within
the matrix_mdev object in that function.
See the vfio-ap-locking.rst in the linux kernel tree. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/vfio-ap: Fix NULL deref in status_show() during queue probe
When vfio_ap_mdev_probe_queue() creates the sysfs attribute group,
the queue's driver data has not yet been set. A concurrent read of
the 'status' attribute can therefore call dev_get_drvdata() and
get NULL, which is then passed directly to
vfio_ap_mdev_for_queue() where q->apqn is unconditionally
dereferenced, causing a NULL pointer dereference.
Fix this by acquiring the update locks before calling
sysfs_create_group(). The status_show() function acquires
guests_lock before reading the driver data, so any concurrent
read will block until after dev_set_drvdata() has been called
and the update locks are released.
As a bonus, the APQN no longer needs to be read from the queue
struct after allocation — it can be read directly from apdev
before allocation and stored in a local variable, which is then
assigned to q->apqn once the allocation succeeds. |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: mtdoops: free page bitmap when the backing MTD is removed
mtdoops_notify_add() allocates oops_page_used when the configured MTD
device is registered. mtdoops_notify_remove() detaches from that device
but leaves the bitmap allocated. If the same MTD device is later
registered again, the add path allocates a new bitmap and overwrites the
old pointer, leaking one vmalloc allocation per remove/add cycle.
This is only visible when the backing MTD device can disappear and be
registered again while mtdoops remains loaded, so the usual static MTD
case does not expose it.
Free the bitmap after unregistering the dumper and flushing the pending
workers, then clear the pointer and page count before a later attach can
allocate fresh state. Clearing the pointer also keeps the module exit
path from freeing the same bitmap a second time after a remove event. |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: rawnand: validate ONFI extended parameter page sections
nand_flash_detect_ext_param_page() allocates the length declared by the
ONFI parameter page, then treats the data as a fixed header followed by
variable-length sections. It reads that header and advances over sections
without first proving that the fixed page and each current section fit in
the allocation.
Reject pages shorter than the fixed header, track the remaining variable
area while walking sections, and require the ECC section to contain every
field read from struct onfi_ext_ecc_info. Use device-scoped diagnostics
that identify the malformed ONFI section. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: mcast: linearize skbuff for packet generation
batadv_mcast_forw_packet() and batadv_mcast_forw_scrape() is not only
called (indirectly) by the unsharing+linearizing batadv_recv_mcast_packet()
handler. When it is called (indirectly) by batadv_mcast_forw_mcsend() then
it will be unshared but not linearized. The SKB_LINEAR_ASSERT() can
therefore cause a fatal BUG().
The linearization should happen during the expansion of the head because
the scrape function can be hit already during the initial
batadv_mcast_forw_mode() selection code:
* batadv_interface_tx
* batadv_mcast_forw_mode
* batadv_mcast_forw_mode_by_count()
* batadv_mcast_forw_push()
-> calls batadv_mcast_forw_expand_head() before everything else
* batadv_mcast_forw_push_tvlvs()
* batadv_mcast_forw_push_dests()
* batadv_mcast_forw_push_adjust_padding()
* batadv_mcast_forw_scrape() |
