| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The Otter Blocks WordPress plugin before 3.2.8 does not enforce its block visibility conditions when a published post is rendered through the WordPress REST API, allowing unauthenticated users to read block content that the site owner restricted to specific roles, logged-in users, the post author, categories or tags, or (on the Pro tier) Stripe purchasers. |
| A permissions issue was addressed with additional restrictions. This issue is fixed in macOS Sequoia 15.8, macOS Tahoe 26.5. An app may be able to access protected user data. |
| Vulnerability in the Oracle Global Lifecycle Management NextGen OUI Framework product of Oracle Fusion Middleware (component: NextGen Installer). Supported versions that are affected are 12.2.1.4.0, 14.1.1.0.0, 14.1.2.0.0, 14.1.2.1.0 and 15.1.1.0.0. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Global Lifecycle Management NextGen OUI Framework. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of Oracle Global Lifecycle Management NextGen OUI Framework. CVSS 3.1 Base Score 7.5 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H). |
| Vulnerability in the Oracle Outside In Technology product of Oracle Fusion Middleware (component: Outside In Clean Content SDK). The supported version that is affected is 8.5.8. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Outside In Technology. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of Oracle Outside In Technology. CVSS 3.1 Base Score 7.5 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H). |
| Vulnerability in the Oracle Outside In Technology product of Oracle Fusion Middleware (component: Outside In Clean Content SDK). The supported version that is affected is 8.5.8. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Outside In Technology. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of Oracle Outside In Technology. CVSS 3.1 Base Score 7.5 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H). |
| The "ASMobile" web interface, which is part of the VertiGIS software package "GIS Portal", allows authenticated users to define a business reference. JavaScript code can be inserted into this field. On its own this only affects the user who entered it (self-XSS). However, the business reference is included in the order details when the user places an order through the web interface. The order is later listed in the OrderAdministration portal (AuftragsManager) of VertiGIS WebOrderSystem, where the stored code is executed as soon as a highly privileged user opens the order. Version 7.0.8.6 of WebOrderSystem, the latest available at the time of testing, is affected. The vendor did not provide information about further affected versions. |
| The CustomerAdministration portal (KundenManager) of VertiGIS WebOrderSystem allows privileged users to search for employees across all defined companies (user groups). The search term can be passed in the "searchValue" URL parameter, so the search is performed when a logged-in user opens such a URL. JavaScript code placed in this parameter is executed in the victim's browser. An unauthenticated attacker who knows the URL structure can craft a link that contains script code. The code runs if a privileged user who is currently logged into the portal opens the link. Because administrative users can change the passwords of other users, including administrators, without entering the old password, an attacker may be able to take over accounts or lock out other users. Version 7.0.8.6, the latest available at the time of testing, is affected. The vendor did not provide information about further affected versions. |
| The CustomerAdministration portal (KundenManager) of VertiGIS WebOrderSystem allows privileged users to manage the employees of defined companies (user groups). User properties, for example the "secondName" parameter, can be filled with JavaScript code while editing a user. The code is stored and executed in the browser of any other privileged user who opens the edited user entry or the user overview of the corresponding user group. An authenticated attacker with access to the portal can use this to run script code in the session of other portal users. Version 7.0.8.6, the latest available at the time of testing, is affected. The vendor did not provide information about further affected versions. |
| Buffer Overflow vulnerability in WEINVEIW CO.,LTD EBPro v.6.10.01.510_20251022 allows a remote attacker to execute arbitrary code via the UtilityManagerEx.exe component |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SVM: Preserve TLB control (i.e. pending TLB flush) on failed VMRUN
Don't reset the VMCB's TLB control back to "do nothing" on a failed VMRUN,
as empirical testing shows that the CPU performs the requested TLB flush if
and only if VMRUN is successful, i.e. clearing TLB control on a failed
VMRUN effectively drops a TLB flush.
Explicitly track the need to flush all ASIDs on a per-CPU basis, as the
ASID reuse condition is tied to the pCPU, not to the vCPU. As a bonus,
this also obviates the need to avoid clobbering FLUSH_ALL_ASID with
TLB_CONTROL_FLUSH_ASID, e.g. in svm_flush_tlb_asid().
Deliberately don't bother saving/restoring the "old" tlb_ctl on failure,
in quotes because it's not exactly the old tlb_ctl, it's the tlb_ctl from
after pre_svm_run(), but before updating tlb_ctl for flush_all_asids. If
VMRUN fails and TLB_CONTROL_FLUSH_ALL_ASID is forced, then the next
successful run of the VMCB *may* unnecessarily flush all ASIDs, which
strictly speaking could result in noisy neighbor issues. However, the
fact that new_asid() is already guest-triggerable, because of KVM's flawed
behavior of clearing the ASID on emulated INIT, means that a guest can
already trigger a flush of all ASIDs at roughly the same rate. And once
KVM stops clobbering the ASID on emulated INIT, *or* assigns a static ASID
to each vCPU, this flaw goes away. |
| Vulnerability in the Siebel Apps - Marketing product of Oracle Siebel CRM (component: Marketing). Supported versions that are affected are 17.0-26.9. Difficult to exploit vulnerability allows unauthenticated attacker with logon to the infrastructure where Siebel Apps - Marketing executes to compromise Siebel Apps - Marketing. Successful attacks of this vulnerability can result in unauthorized ability to cause a partial denial of service (partial DOS) of Siebel Apps - Marketing. CVSS 3.1 Base Score 2.9 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:L). |
| Vulnerability in the Siebel Apps - Marketing product of Oracle Siebel CRM (component: Marketing). Supported versions that are affected are 17.0-26.9. Difficult to exploit vulnerability allows unauthenticated attacker with logon to the infrastructure where Siebel Apps - Marketing executes to compromise Siebel Apps - Marketing. Successful attacks of this vulnerability can result in unauthorized ability to cause a partial denial of service (partial DOS) of Siebel Apps - Marketing. CVSS 3.1 Base Score 2.9 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:L). |
| As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco owned Open Source Snort 3 Software engineering team has conducted a comprehensive internal security review. This review resulted in software hardening releases that address multiple internally discovered vulnerabilities.
The vulnerabilities tracked by CVE-2026-20356 are related to issues concerning uncontrolled resource consumption that are grouped under the Common Weakness Enumeration (CWE) Base CWE-400. |
| Mistune before 3.3.0 contains a cross-site scripting vulnerability in the Include directive that emits included .html, .xhtml, or .htm file content as raw block_html tokens. Attackers who can plant an HTML file readable by the renderer can reference it via an include directive, combined with path traversal, to execute stored scripts when escape=False is set. |
| Mistune before 3.3.0 contains a path traversal vulnerability in the Include directive that allows attackers to read arbitrary files by supplying ../ sequences in include paths. Attackers can also inject HTML through unescaped error messages and included file contents to perform cross-site scripting even when escape=True is set. |
| Incus 7.0.0 before 7.0.2 and 7.1.0 before 7.5.0 contains a path traversal vulnerability that allows clients able to create instances to write files on the host. The flaw stems from unvalidated dependent custom volume names in instance backup index.yaml files. Attackers can import a crafted instance backup with ../ sequences in dependent volume names to create root-owned directories with controlled content, leading to full host compromise. |
| Wasmtime before 36.0.16, 37.0.0 before 48.0.3, and 49.0.0 before 49.0.1 does not adequately account for host allocations when lifting guest values through the dynamically-typed Val API, bypassing the hostcall fuel limit. A malicious WebAssembly guest can return crafted values that allocate at least ~100x more host memory than tracked, causing denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SVM: Update control fields on #VMEXIT if and only if VMRUN succeeded
Leave control.erap_ctl and control.clean as-is in the VMCS if VMRUN fails,
because as per AMD:
there's no explicit architectural guarantee about the behavior in the
presence of VMRUN failures. So the best thing to do would be to assume
that if VMRUN fails, the actions requested in the control fields may not
have been performed. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: nVMX: Force MSR bitmap refresh if runtime eVMCS controls are modified
Force a refresh of the vmcs02 MSR bitmap during nested VM-Enter if the
runtime eVMCS controls (pin, primary, secondary, etc.) are being updated.
If L1 isn't intercepting TPR writes, runs L2 with TPR virtualization, and
then runs the same L2 with TPR virtualization disabled, KVM will fail to
refresh msr_bitmap02 and leave TPR in passthrough mode even though TPR
virtualization is disabled. I.e. failure to refresh the bitmap lets L2 (or
L1 by proxy) read and write L0's TPR. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet: pci-epf: reject too-short SGL segments
The host controls an SGL segment's length. A nonzero length smaller than
one SGL descriptor makes nr_descs zero, so
nvmet_pci_epf_get_sgl_segment() reads the type byte of sgls[-1] outside
the allocated buffer. If that byte contains a segment descriptor type,
the function also copies the preceding 16 bytes and returns a negative
descriptor count.
The read was reproduced in 3/3 KASAN boots with only the host transfer
mocked by a KUnit test:
BUG: KASAN: slab-out-of-bounds in nvmet_pci_epf_get_sgl_segment
Read of size 1 by task kunit_try_catch
Call Trace:
nvmet_pci_epf_get_sgl_segment
nvmet_pci_epf_short_sgl_test
Kernel panic - not syncing: KASAN: panic_on_warn set ...
Reject segments that cannot hold one descriptor before allocating or
transferring their contents. |
