| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
IB/mlx4: Fix use-after-free on pkey sysfs registration failure
register_pkey_tree() ignores errors from register_one_pkey_tree() and
continues registering the remaining slaves. The per-slave error path has
already released the pkey parent kobjects, but their pointers remain
stored in the device. A later device cleanup therefore passes the stale
pointers to kobject_put(), causing a use-after-free.
Clear the parent pointers after releasing a failed slave tree and skip
unregistered trees during device cleanup. This preserves the existing
best-effort registration behavior while preventing a second cleanup of
the failed tree. |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Fix NULL sched deref in kfunc sub-sched error paths
When the root scheduler has sub-scheds attached, the COMPAT kfunc
wrappers scx_bpf_select_cpu_and() and scx_bpf_dsq_insert_vtime() refuse
the call and report to @p's scheduler:
scx_error(scx_task_sched(p), "... must be used");
The wrappers are reachable with tasks that have no scheduler.
scx_bpf_select_cpu_and() is in the select_cpu kfunc group, which
scx_kfunc_context_filter() opens to BPF_PROG_TYPE_SYSCALL programs;
scx_bpf_dsq_insert_vtime() is in the enqueue_dispatch group, which
ops.enqueue() and ops.dispatch() may call with any KF_RCU task -- the
group has no kf_tasks validation, and scx_dsq_insert_preamble() checks
task ownership with scx_task_on_sched() precisely because @p may be an
arbitrary task.
scx_task_sched(p) is p->scx.sched, which is NULL for tasks past
sched_ext_dead() -- which clears it via scx_disable_and_exit_task() on
exit -- and for idle tasks, which the enable paths skip as they are
never scheduled through SCX. It is also an rcu_dereference_protected()
that expects @p's pi_lock or rq lock, which neither wrapper holds.
Passing NULL to scx_error() reaches scx_vexit(), which dereferences
sch->exit_info, oopsing the kernel.
One concrete trigger exercised while developing the fix: a
BPF_PROG_TYPE_SYSCALL program calling the select_cpu_and wrapper on an
exited-but-not-reaped task while a sub-scheduler was attached (its pid
stays findable while the zombie is unreaped; faulting instruction is
the scx_vexit() prologue "mov r15,[rdi+0x398]" with RDI=NULL and 0x398
the offset of sch->exit_info):
sched_ext: BPF scheduler "kfunc_subsched_null" enabled
sched_ext: BPF sub-scheduler "kfunc_subsched_null" enabled
sched_ext: Unassociated program run_select_cpu_ (id 76)
BUG: kernel NULL pointer dereference, address: 0000000000000398
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 7 UID: 0 PID: 8201 Comm: kfunc_test_runn Tainted: G W
RIP: 0010:scx_vexit+0x25/0xa0
Code: ... <4c> 8b bf 98 03 00 00 ...
CR2: 0000000000000398
Call Trace:
<TASK>
__scx_exit+0x4f/0x70
scx_bpf_select_cpu_and+0xab/0xb0
bpf_prog_430ed61a7b66e03a_run_select_cpu_and+0x9c/0xe7
? __x64_sys_bpf+0x2c/0x40
bpf_prog_test_run_syscall+0x130/0x2f0
__sys_bpf+0x930/0x10d0
? __x64_sys_bpf+0x2c/0x40
__x64_sys_bpf+0x2c/0x40
do_syscall_64+0xbc/0x460
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK>
Read @p's scheduler under RCU instead, which the wrappers can do from
their guard(rcu)(): fault it when it can be determined, and when it
can't be determined -- @p is a task past sched_ext_dead() or an idle
task -- there is nothing obviously wrong to report, so just refuse the
call as before without faulting any scheduler.
These COMPAT wrappers are scheduled for eventual removal once the
deprecation grace period elapses, but until then -- and regardless of
their removal timeline -- they must not oops the kernel on a task they
are handed. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: filemap: retain mapped dropbehind folios
Fault-around can map ready dropbehind folios without going through the
normal page-cache lookup that clears dropbehind. A mapping represents a
competing cached user, so retain the folio instead of forcibly unmapping
it when writeback completes.
For a mapped folio, folio_unmap_invalidate() can call
unmap_mapping_folio(), which takes i_mmap_rwsem and may sleep. Retaining
mapped folios avoids this path when folio_end_dropbehind() runs in
non-preemptible task context.
Tal was able to trigger a sleeping-in-atomic warning due to this [1].
Unmapped dropbehind folios continue through the existing invalidation path. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: use hlist_del_init_rcu for state_cache and state_cache_input
Commit 14acf9652e56 ("xfrm: defensively unhash xfrm_state lists in
__xfrm_state_delete") converted bydst/bysrc/byseq/byspi from
hlist_del_rcu() to hlist_del_init_rcu() so that a second
__xfrm_state_delete() on the same object becomes a no-op rather than a
write through LIST_POISON pprev. It missed state_cache and
state_cache_input, which kept hlist_del_rcu():
- hlist_del_rcu() leaves pprev = LIST_POISON2 (non-NULL), so
hlist_unhashed() returns false.
- hlist_del_init_rcu() leaves pprev = NULL, so hlist_unhashed()
returns true.
A second __xfrm_state_delete() therefore enters __hlist_del() on the
already-deleted state_cache/state_cache_input nodes and does
WRITE_ONCE(*pprev, next) through LIST_POISON2 — a write use-after-free
once the slab is reused. The corruption can in turn cause a subsequent
hlist_for_each_entry_rcu traversal to follow a dangling next pointer,
producing the read use-after-free reported in xfrm_input_state_lookup().
Switch state_cache and state_cache_input to hlist_del_init_rcu() to
match the other four lists, closing the write use-after-free and, with
it, the read use-after-free it spawns. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: serialize state GC with device state flush
The deferred-device pass in xfrm_dev_state_flush() finds states under
xfrm_state_dev_gc_lock, but drops the lock before calling
xfrm_dev_state_free() because the driver callback may sleep. The device
GC list does not hold an xfrm_state reference, so the state GC worker can
destroy the same state concurrently.
The race can proceed as follows:
CPU 0 CPU 1
find x on the device GC list
drop xfrm_state_dev_gc_lock
read x->xso.dev
xfrm_state_gc_destroy(x)
xfrm_dev_state_free(x)
xfrm_state_free(x)
continue xfrm_dev_state_free(x)
Both paths can invoke the driver callback and drop the device reference.
CPU 0 can also access the xfrm_state after CPU 1 has freed it.
KASAN reported:
BUG: KASAN: slab-use-after-free in xfrm_dev_state_free+0x24c/0x2a0
Read of size 8 at addr ffff88810bbaa960 by task poc/102
Call Trace:
xfrm_dev_state_free+0x24c/0x2a0
xfrm_dev_state_flush+0x353/0x400
xfrm_dev_event+0x26d/0x3a0
notifier_call_chain+0xc0/0x280
__dev_notify_flags+0x169/0x250
netif_change_flags+0xe7/0x160
dev_change_flags+0x96/0x220
devinet_ioctl+0x7f4/0x1880
Allocated by task 87:
xfrm_state_alloc+0x1e/0x5c0
xfrm_add_sa+0xe7f/0x5820
xfrm_user_rcv_msg+0x4f3/0x940
Freed by task 57:
kmem_cache_free+0xcb/0x3d0
xfrm_state_gc_task+0x4a8/0x650
process_one_work+0x63a/0x1070
Serialize xfrm_state destruction against the deferred-device pass with a
mutex. Keep xfrm_state_dev_gc_lock limited to list operations and retain
the existing callback and device-reference release ordering. |
| Transient DOS when processing a continuous receive command with a zero-sized global configuration override. |
| Memory Corruption when asynchronous threads access shared performance counter data simultaneously during FastRPC invocations. |
| In the Linux kernel, the following vulnerability has been resolved:
net/packet: clear RX owner on VNET header error
Commit 61fad6816fc1 ("net/packet: tpacket_rcv: avoid a producer race
condition") added rx_owner_map and made tpacket_rcv() claim a V1 or V2
ring slot before converting the virtio-net header. If the conversion
fails, the drop path leaves the slot claimed.
With a one-frame TPACKET_V2 ring, an unsupported UDP GSO packet leaves
the only slot unavailable, so the ring also drops the next valid packet.
Clear the ownership bit on this error path. TPACKET_V3 already clears
its block state here. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_api: release tail references on DELACTION failure
A batched RTM_DELACTION request takes a temporary reference on each
action before attempting any deletion. tcf_action_delete() clears
each processed slot and drops its temporary reference before attempting
the deletion. If deletion fails, tca_action_gd() calls
tcf_action_put_many() to release the remaining references, but its
tcf_act_for_each_action() iterator stops at the first NULL slot.
When a batch stops at an action bound to a filter, this leaks a
reference on each subsequent action. A later delete of an unbound
action can then return success without removing it from the IDR.
Walk the full array in tcf_action_put_many() and skip NULL slots to
release the references held on the unprocessed actions. |
| In the Linux kernel, the following vulnerability has been resolved:
net: wwan: mhi_wwan_mbim: guard against a cyclic NDP chain
The NDP traversal in mhi_mbim_rx() only stops when wNextNdpIndex is
zero. Nothing requires the offsets to advance, so a modem that
points an NDP at itself, or at an earlier NDP, keeps the loop
spinning forever on one CPU.
Break out when the next NDP offset is not larger than the current
one.
Verified in a QEMU guest with a fault injector feeding the driver's
receive callback an NTB whose single NDP points at itself: the
unpatched driver spins in mhi_mbim_rx() with one CPU pinned at 100%
and the thread never returns. With this check the loop terminates
within one iteration.
Changes in v2: move the non-increasing check to the wNextNdpIndex
retrieval site, as suggested by Loic Poulain, instead of tracking
the previous offset in a separate variable. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/ttm: fix swapped-out resources never leaving their bulk_move range
ttm_tt_swapout() returns the number of pages swapped out on success and
a negative error code on failure; for a populated ttm it never returns
zero. Commit b2ed01e7ad3d ("drm/ttm: Fix ttm_bo_swapout() infinite LRU
walk on swapout failure") moved the bulk_move bookkeeping in
ttm_bo_swapout_cb() under "if (!ret)", so the
ttm_resource_del_bulk_move_unevictable() / ttm_resource_move_to_lru_tail()
pair is now skipped on every successful swapout. The equivalent change
for the shrinker in commit 1d59f36e95f7 ("drm/ttm: Fix ttm_bo_shrink()
infinite LRU walk on backup failure") tests "lret > 0", which is what
was intended here as well.
Before b2ed01e7ad3d the resource was taken off the bulk_move before the
swapout; since then a swapped-out resource stays inside its BO's
bulk_move range (and on the manager LRU) although it is unevictable.
When it is later freed or the BO leaves the bulk_move
(ttm_resource_free(), ttm_bo_set_bulk_move() via amdgpu_vm_bo_del()),
ttm_resource_del_bulk_move() skips it because of its
!ttm_resource_unevictable() guard, so a range endpoint in pos->first /
pos->last is left pointing at freed memory. The next
ttm_lru_bulk_move_tail() or ttm_resource_add_bulk_move() on that cursor
is a use-after-free, seen as the resv WARN in ttm_lru_bulk_move_add(),
"list_del corruption" in ttm_resource_move_to_lru_tail() or a NULL
dereference in ttm_resource_manager_next() -- minutes to hours after a
hibernation, or at process exit / reboot following one. Samuel
Ainsworth's analysis of drm/amd issue 5387 (see Link) identified the
dangling cursor; the missing removal at swapout time is the reason it
dangles.
Testing the condition for success restores the removal. On an AMD
Phoenix APU (ASUS UM3406GA, gfx1103) running suspend-then-hibernate on
a 7.0.y stable kernel carrying the backport (Ubuntu 7.0.0-31) the bug
crashed 5 of 18 hibernation cycles; a function profile of one
hibernation showed 336 ttm_tt_swapout() calls and zero
ttm_resource_del_bulk_move_unevictable() calls. With this change the
removal happens for every swapped-out resource and 12 further cycles
were clean. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix potential OOB read in smb3_enum_snapshots()
If snapshot_array_size is smaller than GMT_TOKEN_SIZE,
smb3_enum_snapshots() sets ret_data_len to
sizeof(struct smb_snapshot_array) without verifying the actual length
of the server's reply.
Because SMB2_ioctl() places no lower bound on the server-supplied
OutputCount and allocates retbuf to exactly that length, a short reply
results in ret_data_len exceeding the size of retbuf. The subsequent
copy_to_user() then reads past the end of retbuf, leaking adjacent slab
memory to userspace. The subsequent clamp check is ineffective as it
only reduces ret_data_len.
Fix this by rejecting replies shorter than
sizeof(struct smb_snapshot_array) with -EIO. Note that the bound is set
to the 12-byte struct size rather than the 16-byte
MIN_SNAPSHOT_ARRAY_SIZE defined in MS-SMB2 3.3.5.15.1, because 12 bytes
is exactly what copy_to_user() attempts to read. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix next_buffer UAF and NextCommand bounds in compound PDUs
Fix several related bounds checking and pointer lifecycle issues in
receive_encrypted_standard()'s handling of compound encrypted frames:
- Clear next_buffer after assigning it to server->bigbuf. A stale
next_buffer pointer can lead to a use-after-free on subsequent
error paths.
- Update pdu_length to the decrypted plaintext size (buf_size). Using
the pre-decryption length allows NextCommand to point into stale
ciphertext residue.
- Reject next_cmd values smaller than MID_HEADER_SIZE(server).
- Fix an integer overflow in the upper bound check by verifying
pdu_length - next_cmd < MID_HEADER_SIZE(server), ensuring the
trailing slice is large enough for a header. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Avoid integer underflow in EOP ring size calculation.
The low 6 bits of cp_hqd_eop_control store the base-2 logarithm
of the EOP ring size. This was calculated as
order_base_2(q->eop_ring_buffer_size / 4) - 1
But order_base_2 can in theory return 0, so this could underflow
(although in practice the ring buffer size cannot be less than 4096).
Change this to
order_base_2(q->eop_ring_buffer_size / 8)
using properties of logarithms.
Also add to the above comment to make the mathematics more clear.
(cherry picked from commit f0f43fcf8b2b3a924cad9444340921c96ed5f634) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Skip KFD mapping clear before initialization
amdgpu_amdkfd_clear_kfd_mapping() assumes that a non-NULL kfd_dev
has a fully populated node array. This is not true when KFD device
initialization fails after probe.
For example, kgd2kfd_device_init() sets num_nodes before checking
PCIe atomics support. On Polaris systems without the required atomics,
it returns before allocating nodes[0], but the kfd_dev remains attached
to the amdgpu device. A later GPU reset then dereferences nodes[0]->id.
Require the authoritative KFD initialization flag before walking the
node array, matching the existing KFD reset and teardown paths.
(cherry picked from commit 4ac1835823c47903fbb278bbf474773c46f59edc) |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mwifiex: prevent authentication frame length truncation
mwifiex_cfg80211_authenticate() derives the authentication frame length
from req->ie_len and req->auth_data_len, both of type size_t, but stores
it in a u16.
NL80211_ATTR_AUTH_DATA only has a minimum length policy. Since nla_len is
a u16, a single attribute can carry up to 65531 bytes of payload, so the
sum can exceed U16_MAX before it is assigned to pkt_len. The truncated
pkt_len determines the skb frame area, while the copy length remains
req->auth_data_len - 4, resulting in a heap buffer overflow.
For example, with auth_data_len equal to 65510 and no IEs, the sum is
65546. It is truncated to 10 and then reduced by four to 6. The driver
appends only six bytes to the skb with skb_put(), but then copies 65506
user-provided bytes into the authentication body.
Reaching this path requires CAP_NET_ADMIN in the user namespace owning
the network namespace, an up station netdev, and a suitable BSS/SAE
authentication request.
Compute the length in size_t, reject values that cannot be represented by
the firmware's u16 frame length field, and only then assign it to pkt_len. |
| A vulnerability has been found in Kusalkasilva Learning-Management-System up to ffeb873f8803f1e9664384ff75000c7da45466d2. Impacted is the function mysql_error of the file login.php of the component Login Endpoint. The manipulation of the argument username/password leads to sql injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. Continious delivery with rolling releases is used by this product. Therefore, no version details of affected nor updated releases are available. The project was informed of the problem early through an issue report but has not responded yet. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: wilc1000: fix out-of-bounds read in P2P public action frames
wilc_wfi_p2p_rx() and mgmt_tx() start parsing a frame once
ieee80211_is_public_action() returns true. That helper only verifies the
frame is long enough for the action category field, that is
offsetofend(struct ieee80211_mgmt, u.action.category), 25 bytes. Both
functions then read the P2P public action header up to oui_subtype at
offset 30 and pass "size - ie_offset" to cfg80211_find_vendor_ie(), where
ie_offset is offsetof(struct ieee80211_mgmt, u) + sizeof(*d), i.e. 32.
A public action frame of 25 to 31 bytes passes the check but is shorter
than that 32 byte header, so oui_subtype can be read out of bounds, and
because the length is unsigned, "size - ie_offset" underflows to a value
close to 4 GiB. cfg80211_find_vendor_ie() takes an unsigned int length,
so even the size_t subtraction in mgmt_tx() is truncated to the same
value. It then walks far past the buffer searching for a vendor element
until it reaches unmapped memory.
In the receive path the frame arrives over the air and needs no
association, so a nearby unauthenticated device can crash the host while
it is in P2P listen. Reject frames shorter than the P2P public action
header in both paths before dereferencing it. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: wlcore: release runtime PM ref on regdomain config failure
wlcore_regdomain_config() gets a runtime PM reference before sending
the regulatory-domain command. When
wlcore_cmd_regdomain_config_locked() fails, the function queues recovery
and returns without dropping that reference.
Release the reference after handling the command result so both success
and failure paths balance the preceding
pm_runtime_resume_and_get(). The recovery worker takes a separate
runtime PM reference and cannot release the reference held here. |
| Missing Authorization vulnerability in Webful Creations RepairBuddy computer-repair-shop allows Retrieve Embedded Sensitive Data.This issue affects RepairBuddy: from n/a through 4.1226. |
