| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
exfat: fix improper check of dentry.stream.valid_size
We found an infinite loop bug in the exFAT file system that can lead to a
Denial-of-Service (DoS) condition. When a dentry in an exFAT filesystem is
malformed, the following system calls — SYS_openat, SYS_ftruncate, and
SYS_pwrite64 — can cause the kernel to hang.
Root cause analysis shows that the size validation code in exfat_find()
does not check whether dentry.stream.valid_size is negative. As a result,
the system calls mentioned above can succeed and eventually trigger the DoS
issue.
This patch adds a check for negative dentry.stream.valid_size to prevent
this vulnerability. |
| In the Linux kernel, the following vulnerability has been resolved:
FS: JFS: Check for read-only mounted filesystem in txBegin
This patch adds a check for read-only mounted filesystem
in txBegin before starting a transaction potentially saving
from NULL pointer deref. |
| In the Linux kernel, the following vulnerability has been resolved:
tty: n_gsm: Don't block input queue by waiting MSC
Currently gsm_queue() processes incoming frames and when opening
a DLC channel it calls gsm_dlci_open() which calls gsm_modem_update().
If basic mode is used it calls gsm_modem_upd_via_msc() and it
cannot block the input queue by waiting the response to come
into the same input queue.
Instead allow sending Modem Status Command without waiting for remote
end to respond. Define a new function gsm_modem_send_initial_msc()
for this purpose. As MSC is only valid for basic encoding, it does
not do anything for advanced or when convergence layer type 2 is used. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: fix memory leak in ath12k_qmi_driver_event_work()
Currently the buffer pointed by event is not freed in case
ATH12K_FLAG_UNREGISTERING bit is set, this causes memory leak.
Add a goto skip instead of return, to ensure event and all the
list entries are freed properly.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: rcar-host: Pass proper IRQ domain to generic_handle_domain_irq()
Starting with commit dd26c1a23fd5 ("PCI: rcar-host: Switch to
msi_create_parent_irq_domain()"), the MSI parent IRQ domain is NULL because
the object of type struct irq_domain_info passed to:
msi_create_parent_irq_domain() ->
irq_domain_instantiate()() ->
__irq_domain_instantiate()
has no reference to the parent IRQ domain. Using msi->domain->parent as an
argument for generic_handle_domain_irq() leads to below error:
"Unable to handle kernel NULL pointer dereference at virtual address"
This error was identified while switching the upcoming RZ/G3S PCIe host
controller driver to msi_create_parent_irq_domain() (which was using a
similar pattern to handle MSIs (see link section)), but it was not tested
on hardware using the pcie-rcar-host controller driver due to lack of
hardware.
[mani: reworded subject and description] |
| In the Linux kernel, the following vulnerability has been resolved:
blk-mq: fix blk_mq_tags double free while nr_requests grown
In the case user trigger tags grow by queue sysfs attribute nr_requests,
hctx->sched_tags will be freed directly and replaced with a new
allocated tags, see blk_mq_tag_update_depth().
The problem is that hctx->sched_tags is from elevator->et->tags, while
et->tags is still the freed tags, hence later elevator exit will try to
free the tags again, causing kernel panic.
Fix this problem by replacing et->tags with new allocated tags as well.
Noted there are still some long term problems that will require some
refactor to be fixed thoroughly[1].
[1] https://lore.kernel.org/all/[email protected]/ |
| In the Linux kernel, the following vulnerability has been resolved:
media: i2c: tc358743: Fix use-after-free bugs caused by orphan timer in probe
The state->timer is a cyclic timer that schedules work_i2c_poll and
delayed_work_enable_hotplug, while rearming itself. Using timer_delete()
fails to guarantee the timer isn't still running when destroyed, similarly
cancel_delayed_work() cannot ensure delayed_work_enable_hotplug has
terminated if already executing. During probe failure after timer
initialization, these may continue running as orphans and reference the
already-freed tc358743_state object through tc358743_irq_poll_timer.
The following is the trace captured by KASAN.
BUG: KASAN: slab-use-after-free in __run_timer_base.part.0+0x7d7/0x8c0
Write of size 8 at addr ffff88800ded83c8 by task swapper/1/0
...
Call Trace:
<IRQ>
dump_stack_lvl+0x55/0x70
print_report+0xcf/0x610
? __pfx_sched_balance_find_src_group+0x10/0x10
? __run_timer_base.part.0+0x7d7/0x8c0
kasan_report+0xb8/0xf0
? __run_timer_base.part.0+0x7d7/0x8c0
__run_timer_base.part.0+0x7d7/0x8c0
? rcu_sched_clock_irq+0xb06/0x27d0
? __pfx___run_timer_base.part.0+0x10/0x10
? try_to_wake_up+0xb15/0x1960
? tmigr_update_events+0x280/0x740
? _raw_spin_lock_irq+0x80/0xe0
? __pfx__raw_spin_lock_irq+0x10/0x10
tmigr_handle_remote_up+0x603/0x7e0
? __pfx_tmigr_handle_remote_up+0x10/0x10
? sched_balance_trigger+0x98/0x9f0
? sched_tick+0x221/0x5a0
? _raw_spin_lock_irq+0x80/0xe0
? __pfx__raw_spin_lock_irq+0x10/0x10
? tick_nohz_handler+0x339/0x440
? __pfx_tmigr_handle_remote_up+0x10/0x10
__walk_groups.isra.0+0x42/0x150
tmigr_handle_remote+0x1f4/0x2e0
? __pfx_tmigr_handle_remote+0x10/0x10
? ktime_get+0x60/0x140
? lapic_next_event+0x11/0x20
? clockevents_program_event+0x1d4/0x2a0
? hrtimer_interrupt+0x322/0x780
handle_softirqs+0x16a/0x550
irq_exit_rcu+0xaf/0xe0
sysvec_apic_timer_interrupt+0x70/0x80
</IRQ>
...
Allocated by task 141:
kasan_save_stack+0x24/0x50
kasan_save_track+0x14/0x30
__kasan_kmalloc+0x7f/0x90
__kmalloc_node_track_caller_noprof+0x198/0x430
devm_kmalloc+0x7b/0x1e0
tc358743_probe+0xb7/0x610 i2c_device_probe+0x51d/0x880
really_probe+0x1ca/0x5c0
__driver_probe_device+0x248/0x310
driver_probe_device+0x44/0x120
__device_attach_driver+0x174/0x220
bus_for_each_drv+0x100/0x190
__device_attach+0x206/0x370
bus_probe_device+0x123/0x170
device_add+0xd25/0x1470
i2c_new_client_device+0x7a0/0xcd0
do_one_initcall+0x89/0x300
do_init_module+0x29d/0x7f0
load_module+0x4f48/0x69e0
init_module_from_file+0xe4/0x150
idempotent_init_module+0x320/0x670
__x64_sys_finit_module+0xbd/0x120
do_syscall_64+0xac/0x280
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 141:
kasan_save_stack+0x24/0x50
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3a/0x60
__kasan_slab_free+0x3f/0x50
kfree+0x137/0x370
release_nodes+0xa4/0x100
devres_release_group+0x1b2/0x380
i2c_device_probe+0x694/0x880
really_probe+0x1ca/0x5c0
__driver_probe_device+0x248/0x310
driver_probe_device+0x44/0x120
__device_attach_driver+0x174/0x220
bus_for_each_drv+0x100/0x190
__device_attach+0x206/0x370
bus_probe_device+0x123/0x170
device_add+0xd25/0x1470
i2c_new_client_device+0x7a0/0xcd0
do_one_initcall+0x89/0x300
do_init_module+0x29d/0x7f0
load_module+0x4f48/0x69e0
init_module_from_file+0xe4/0x150
idempotent_init_module+0x320/0x670
__x64_sys_finit_module+0xbd/0x120
do_syscall_64+0xac/0x280
entry_SYSCALL_64_after_hwframe+0x77/0x7f
...
Replace timer_delete() with timer_delete_sync() and cancel_delayed_work()
with cancel_delayed_work_sync() to ensure proper termination of timer and
work items before resource cleanup.
This bug was initially identified through static analysis. For reproduction
and testing, I created a functional emulation of the tc358743 device via a
kernel module and introduced faults through the debugfs interface. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: swap: check for stable address space before operating on the VMA
It is possible to hit a zero entry while traversing the vmas in unuse_mm()
called from swapoff path and accessing it causes the OOPS:
Unable to handle kernel NULL pointer dereference at virtual address
0000000000000446--> Loading the memory from offset 0x40 on the
XA_ZERO_ENTRY as address.
Mem abort info:
ESR = 0x0000000096000005
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x05: level 1 translation fault
The issue is manifested from the below race between the fork() on a
process and swapoff:
fork(dup_mmap()) swapoff(unuse_mm)
--------------- -----------------
1) Identical mtree is built using
__mt_dup().
2) copy_pte_range()-->
copy_nonpresent_pte():
The dst mm is added into the
mmlist to be visible to the
swapoff operation.
3) Fatal signal is sent to the parent
process(which is the current during the
fork) thus skip the duplication of the
vmas and mark the vma range with
XA_ZERO_ENTRY as a marker for this process
that helps during exit_mmap().
4) swapoff is tried on the
'mm' added to the 'mmlist' as
part of the 2.
5) unuse_mm(), that iterates
through the vma's of this 'mm'
will hit the non-NULL zero entry
and operating on this zero entry
as a vma is resulting into the
oops.
The proper fix would be around not exposing this partially-valid tree to
others when droping the mmap lock, which is being solved with [1]. A
simpler solution would be checking for MMF_UNSTABLE, as it is set if
mm_struct is not fully initialized in dup_mmap().
Thanks to Liam/Lorenzo/David for all the suggestions in fixing this
issue. |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/features: Add check for no entries in cxl_feature_info
cxl EDAC calls cxl_feature_info() to get the feature information and
if the hardware has no Features support, cxlfs may be passed in as
NULL.
[ 51.957498] BUG: kernel NULL pointer dereference, address: 0000000000000008
[ 51.965571] #PF: supervisor read access in kernel mode
[ 51.971559] #PF: error_code(0x0000) - not-present page
[ 51.977542] PGD 17e4f6067 P4D 0
[ 51.981384] Oops: Oops: 0000 [#1] SMP NOPTI
[ 51.986300] CPU: 49 UID: 0 PID: 3782 Comm: systemd-udevd Not tainted 6.17.0dj
test+ #64 PREEMPT(voluntary)
[ 51.997355] Hardware name: <removed>
[ 52.009790] RIP: 0010:cxl_feature_info+0xa/0x80 [cxl_core]
Add a check for cxlfs before dereferencing it and return -EOPNOTSUPP if
there is no cxlfs created due to no hardware support. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: ufs: core: mcq: Fix &hwq->cq_lock deadlock issue
When ufshcd_err_handler() is executed, CQ event interrupt can enter waiting
for the same lock. This can happen in ufshcd_handle_mcq_cq_events() and
also in ufs_mtk_mcq_intr(). The following warning message will be generated
when &hwq->cq_lock is used in IRQ context with IRQ enabled. Use
ufshcd_mcq_poll_cqe_lock() with spin_lock_irqsave instead of spin_lock to
resolve the deadlock issue.
[name:lockdep&]WARNING: inconsistent lock state
[name:lockdep&]--------------------------------
[name:lockdep&]inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage.
[name:lockdep&]kworker/u16:4/260 [HC0[0]:SC0[0]:HE1:SE1] takes:
ffffff8028444600 (&hwq->cq_lock){?.-.}-{2:2}, at:
ufshcd_mcq_poll_cqe_lock+0x30/0xe0
[name:lockdep&]{IN-HARDIRQ-W} state was registered at:
lock_acquire+0x17c/0x33c
_raw_spin_lock+0x5c/0x7c
ufshcd_mcq_poll_cqe_lock+0x30/0xe0
ufs_mtk_mcq_intr+0x60/0x1bc [ufs_mediatek_mod]
__handle_irq_event_percpu+0x140/0x3ec
handle_irq_event+0x50/0xd8
handle_fasteoi_irq+0x148/0x2b0
generic_handle_domain_irq+0x4c/0x6c
gic_handle_irq+0x58/0x134
call_on_irq_stack+0x40/0x74
do_interrupt_handler+0x84/0xe4
el1_interrupt+0x3c/0x78
<snip>
Possible unsafe locking scenario:
CPU0
----
lock(&hwq->cq_lock);
<Interrupt>
lock(&hwq->cq_lock);
*** DEADLOCK ***
2 locks held by kworker/u16:4/260:
[name:lockdep&]
stack backtrace:
CPU: 7 PID: 260 Comm: kworker/u16:4 Tainted: G S W OE
6.1.17-mainline-android14-2-g277223301adb #1
Workqueue: ufs_eh_wq_0 ufshcd_err_handler
Call trace:
dump_backtrace+0x10c/0x160
show_stack+0x20/0x30
dump_stack_lvl+0x98/0xd8
dump_stack+0x20/0x60
print_usage_bug+0x584/0x76c
mark_lock_irq+0x488/0x510
mark_lock+0x1ec/0x25c
__lock_acquire+0x4d8/0xffc
lock_acquire+0x17c/0x33c
_raw_spin_lock+0x5c/0x7c
ufshcd_mcq_poll_cqe_lock+0x30/0xe0
ufshcd_poll+0x68/0x1b0
ufshcd_transfer_req_compl+0x9c/0xc8
ufshcd_err_handler+0x3bc/0xea0
process_one_work+0x2f4/0x7e8
worker_thread+0x234/0x450
kthread+0x110/0x134
ret_from_fork+0x10/0x20 |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: comp - Use same definition of context alloc and free ops
In commit 42d9f6c77479 ("crypto: acomp - Move scomp stream allocation
code into acomp"), the crypto_acomp_streams struct was made to rely on
having the alloc_ctx and free_ctx operations defined in the same order
as the scomp_alg struct. But in that same commit, the alloc_ctx and
free_ctx members of scomp_alg may be randomized by structure layout
randomization, since they are contained in a pure ops structure
(containing only function pointers). If the pointers within scomp_alg
are randomized, but those in crypto_acomp_streams are not, then
the order may no longer match. This fixes the problem by removing the
union from scomp_alg so that both crypto_acomp_streams and scomp_alg
will share the same definition of alloc_ctx and free_ctx, ensuring
they will always have the same layout. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Explicitly check accesses to bpf_sock_addr
Syzkaller found a kernel warning on the following sock_addr program:
0: r0 = 0
1: r2 = *(u32 *)(r1 +60)
2: exit
which triggers:
verifier bug: error during ctx access conversion (0)
This is happening because offset 60 in bpf_sock_addr corresponds to an
implicit padding of 4 bytes, right after msg_src_ip4. Access to this
padding isn't rejected in sock_addr_is_valid_access and it thus later
fails to convert the access.
This patch fixes it by explicitly checking the various fields of
bpf_sock_addr in sock_addr_is_valid_access.
I checked the other ctx structures and is_valid_access functions and
didn't find any other similar cases. Other cases of (properly handled)
padding are covered in new tests in a subsequent patch. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm: Do not validate SSPP when it is not ready
Current code will validate current plane and previous plane to
confirm they can share a SSPP with multi-rect mode. The SSPP
is already allocated for previous plane, while current plane
is not associated with any SSPP yet. Null pointer is referenced
when validating the SSPP of current plane. Skip SSPP validation
for current plane.
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020
Mem abort info:
ESR = 0x0000000096000004
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
Data abort info:
ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=0000000888ac3000
[0000000000000020] pgd=0000000000000000, p4d=0000000000000000
Internal error: Oops: 0000000096000004 [#1] SMP
Modules linked in:
CPU: 4 UID: 0 PID: 1891 Comm: modetest Tainted: G S 6.15.0-rc2-g3ee3f6e1202e #335 PREEMPT
Tainted: [S]=CPU_OUT_OF_SPEC
Hardware name: SM8650 EV1 rev1 4slam 2et (DT)
pstate: 63400009 (nZCv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--)
pc : dpu_plane_is_multirect_capable+0x68/0x90
lr : dpu_assign_plane_resources+0x288/0x410
sp : ffff800093dcb770
x29: ffff800093dcb770 x28: 0000000000002000 x27: ffff000817c6c000
x26: ffff000806b46368 x25: ffff0008013f6080 x24: ffff00080cbf4800
x23: ffff000810842680 x22: ffff0008013f1080 x21: ffff00080cc86080
x20: ffff000806b463b0 x19: ffff00080cbf5a00 x18: 00000000ffffffff
x17: 707a5f657a696c61 x16: 0000000000000003 x15: 0000000000002200
x14: 00000000ffffffff x13: 00aaaaaa00aaaaaa x12: 0000000000000000
x11: ffff000817c6e2b8 x10: 0000000000000000 x9 : ffff80008106a950
x8 : ffff00080cbf48f4 x7 : 0000000000000000 x6 : 0000000000000000
x5 : 0000000000000000 x4 : 0000000000000438 x3 : 0000000000000438
x2 : ffff800082e245e0 x1 : 0000000000000008 x0 : 0000000000000000
Call trace:
dpu_plane_is_multirect_capable+0x68/0x90 (P)
dpu_crtc_atomic_check+0x5bc/0x650
drm_atomic_helper_check_planes+0x13c/0x220
drm_atomic_helper_check+0x58/0xb8
msm_atomic_check+0xd8/0xf0
drm_atomic_check_only+0x4a8/0x968
drm_atomic_commit+0x50/0xd8
drm_atomic_helper_update_plane+0x140/0x188
__setplane_atomic+0xfc/0x148
drm_mode_setplane+0x164/0x378
drm_ioctl_kernel+0xc0/0x140
drm_ioctl+0x20c/0x500
__arm64_sys_ioctl+0xbc/0xf8
invoke_syscall+0x50/0x120
el0_svc_common.constprop.0+0x48/0xf8
do_el0_svc+0x28/0x40
el0_svc+0x30/0xd0
el0t_64_sync_handler+0x144/0x168
el0t_64_sync+0x198/0x1a0
Code: b9402021 370fffc1 f9401441 3707ff81 (f94010a1)
---[ end trace 0000000000000000 ]---
Patchwork: https://patchwork.freedesktop.org/patch/669224/ |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: use dst_dev_rcu() in tcp_fastopen_active_disable_ofo_check()
Use RCU to avoid a pair of atomic operations and a potential
UAF on dst_dev()->flags. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/rw: ensure allocated iovec gets cleared for early failure
A previous commit reused the recyling infrastructure for early cleanup,
but this is not enough for the case where our internal caches have
overflowed. If this happens, then the allocated iovec can get leaked if
the request is also aborted early.
Reinstate the previous forced free of the iovec for that situation. |
| In the Linux kernel, the following vulnerability has been resolved:
smb/server: fix possible memory leak in smb2_read()
Memory leak occurs when ksmbd_vfs_read() fails.
Fix this by adding the missing kvfree(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Fix NULL pointer dereference in VRAM logic for APU devices
Previously, APU platforms (and other scenarios with uninitialized VRAM managers)
triggered a NULL pointer dereference in `ttm_resource_manager_usage()`. The root
cause is not that the `struct ttm_resource_manager *man` pointer itself is NULL,
but that `man->bdev` (the backing device pointer within the manager) remains
uninitialized (NULL) on APUs—since APUs lack dedicated VRAM and do not fully
set up VRAM manager structures. When `ttm_resource_manager_usage()` attempts to
acquire `man->bdev->lru_lock`, it dereferences the NULL `man->bdev`, leading to
a kernel OOPS.
1. **amdgpu_cs.c**: Extend the existing bandwidth control check in
`amdgpu_cs_get_threshold_for_moves()` to include a check for
`ttm_resource_manager_used()`. If the manager is not used (uninitialized
`bdev`), return 0 for migration thresholds immediately—skipping VRAM-specific
logic that would trigger the NULL dereference.
2. **amdgpu_kms.c**: Update the `AMDGPU_INFO_VRAM_USAGE` ioctl and memory info
reporting to use a conditional: if the manager is used, return the real VRAM
usage; otherwise, return 0. This avoids accessing `man->bdev` when it is
NULL.
3. **amdgpu_virt.c**: Modify the vf2pf (virtual function to physical function)
data write path. Use `ttm_resource_manager_used()` to check validity: if the
manager is usable, calculate `fb_usage` from VRAM usage; otherwise, set
`fb_usage` to 0 (APUs have no discrete framebuffer to report).
This approach is more robust than APU-specific checks because it:
- Works for all scenarios where the VRAM manager is uninitialized (not just APUs),
- Aligns with TTM's design by using its native helper function,
- Preserves correct behavior for discrete GPUs (which have fully initialized
`man->bdev` and pass the `ttm_resource_manager_used()` check).
v4: use ttm_resource_manager_used(&adev->mman.vram_mgr.manager) instead of checking the adev->gmc.is_app_apu flag (Christian) |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: taprio: Limit TCA_TAPRIO_ATTR_SCHED_CYCLE_TIME to INT_MAX.
syzkaller found zero division error [0] in div_s64_rem() called from
get_cycle_time_elapsed(), where sched->cycle_time is the divisor.
We have tests in parse_taprio_schedule() so that cycle_time will never
be 0, and actually cycle_time is not 0 in get_cycle_time_elapsed().
The problem is that the types of divisor are different; cycle_time is
s64, but the argument of div_s64_rem() is s32.
syzkaller fed this input and 0x100000000 is cast to s32 to be 0.
@TCA_TAPRIO_ATTR_SCHED_CYCLE_TIME={0xc, 0x8, 0x100000000}
We use s64 for cycle_time to cast it to ktime_t, so let's keep it and
set max for cycle_time.
While at it, we prevent overflow in setup_txtime() and add another
test in parse_taprio_schedule() to check if cycle_time overflows.
Also, we add a new tdc test case for this issue.
[0]:
divide error: 0000 [#1] PREEMPT SMP KASAN NOPTI
CPU: 1 PID: 103 Comm: kworker/1:3 Not tainted 6.5.0-rc1-00330-g60cc1f7d0605 #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
Workqueue: ipv6_addrconf addrconf_dad_work
RIP: 0010:div_s64_rem include/linux/math64.h:42 [inline]
RIP: 0010:get_cycle_time_elapsed net/sched/sch_taprio.c:223 [inline]
RIP: 0010:find_entry_to_transmit+0x252/0x7e0 net/sched/sch_taprio.c:344
Code: 3c 02 00 0f 85 5e 05 00 00 48 8b 4c 24 08 4d 8b bd 40 01 00 00 48 8b 7c 24 48 48 89 c8 4c 29 f8 48 63 f7 48 99 48 89 74 24 70 <48> f7 fe 48 29 d1 48 8d 04 0f 49 89 cc 48 89 44 24 20 49 8d 85 10
RSP: 0018:ffffc90000acf260 EFLAGS: 00010206
RAX: 177450e0347560cf RBX: 0000000000000000 RCX: 177450e0347560cf
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000100000000
RBP: 0000000000000056 R08: 0000000000000000 R09: ffffed10020a0934
R10: ffff8880105049a7 R11: ffff88806cf3a520 R12: ffff888010504800
R13: ffff88800c00d800 R14: ffff8880105049a0 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff88806cf00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f0edf84f0e8 CR3: 000000000d73c002 CR4: 0000000000770ee0
PKRU: 55555554
Call Trace:
<TASK>
get_packet_txtime net/sched/sch_taprio.c:508 [inline]
taprio_enqueue_one+0x900/0xff0 net/sched/sch_taprio.c:577
taprio_enqueue+0x378/0xae0 net/sched/sch_taprio.c:658
dev_qdisc_enqueue+0x46/0x170 net/core/dev.c:3732
__dev_xmit_skb net/core/dev.c:3821 [inline]
__dev_queue_xmit+0x1b2f/0x3000 net/core/dev.c:4169
dev_queue_xmit include/linux/netdevice.h:3088 [inline]
neigh_resolve_output net/core/neighbour.c:1552 [inline]
neigh_resolve_output+0x4a7/0x780 net/core/neighbour.c:1532
neigh_output include/net/neighbour.h:544 [inline]
ip6_finish_output2+0x924/0x17d0 net/ipv6/ip6_output.c:135
__ip6_finish_output+0x620/0xaa0 net/ipv6/ip6_output.c:196
ip6_finish_output net/ipv6/ip6_output.c:207 [inline]
NF_HOOK_COND include/linux/netfilter.h:292 [inline]
ip6_output+0x206/0x410 net/ipv6/ip6_output.c:228
dst_output include/net/dst.h:458 [inline]
NF_HOOK.constprop.0+0xea/0x260 include/linux/netfilter.h:303
ndisc_send_skb+0x872/0xe80 net/ipv6/ndisc.c:508
ndisc_send_ns+0xb5/0x130 net/ipv6/ndisc.c:666
addrconf_dad_work+0xc14/0x13f0 net/ipv6/addrconf.c:4175
process_one_work+0x92c/0x13a0 kernel/workqueue.c:2597
worker_thread+0x60f/0x1240 kernel/workqueue.c:2748
kthread+0x2fe/0x3f0 kernel/kthread.c:389
ret_from_fork+0x2c/0x50 arch/x86/entry/entry_64.S:308
</TASK>
Modules linked in: |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: Fix NULL pointer dereference in 'ni_write_inode'
Syzbot found the following issue:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000016
Mem abort info:
ESR = 0x0000000096000006
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x06: level 2 translation fault
Data abort info:
ISV = 0, ISS = 0x00000006
CM = 0, WnR = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=000000010af56000
[0000000000000016] pgd=08000001090da003, p4d=08000001090da003, pud=08000001090ce003, pmd=0000000000000000
Internal error: Oops: 0000000096000006 [#1] PREEMPT SMP
Modules linked in:
CPU: 1 PID: 3036 Comm: syz-executor206 Not tainted 6.0.0-rc6-syzkaller-17739-g16c9f284e746 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/26/2022
pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : is_rec_inuse fs/ntfs3/ntfs.h:313 [inline]
pc : ni_write_inode+0xac/0x798 fs/ntfs3/frecord.c:3232
lr : ni_write_inode+0xa0/0x798 fs/ntfs3/frecord.c:3226
sp : ffff8000126c3800
x29: ffff8000126c3860 x28: 0000000000000000 x27: ffff0000c8b02000
x26: ffff0000c7502320 x25: ffff0000c7502288 x24: 0000000000000000
x23: ffff80000cbec91c x22: ffff0000c8b03000 x21: ffff0000c8b02000
x20: 0000000000000001 x19: ffff0000c75024d8 x18: 00000000000000c0
x17: ffff80000dd1b198 x16: ffff80000db59158 x15: ffff0000c4b6b500
x14: 00000000000000b8 x13: 0000000000000000 x12: ffff0000c4b6b500
x11: ff80800008be1b60 x10: 0000000000000000 x9 : ffff0000c4b6b500
x8 : 0000000000000000 x7 : ffff800008be1b50 x6 : 0000000000000000
x5 : 0000000000000000 x4 : 0000000000000001 x3 : 0000000000000000
x2 : 0000000000000008 x1 : 0000000000000001 x0 : 0000000000000000
Call trace:
is_rec_inuse fs/ntfs3/ntfs.h:313 [inline]
ni_write_inode+0xac/0x798 fs/ntfs3/frecord.c:3232
ntfs_evict_inode+0x54/0x84 fs/ntfs3/inode.c:1744
evict+0xec/0x334 fs/inode.c:665
iput_final fs/inode.c:1748 [inline]
iput+0x2c4/0x324 fs/inode.c:1774
ntfs_new_inode+0x7c/0xe0 fs/ntfs3/fsntfs.c:1660
ntfs_create_inode+0x20c/0xe78 fs/ntfs3/inode.c:1278
ntfs_create+0x54/0x74 fs/ntfs3/namei.c:100
lookup_open fs/namei.c:3413 [inline]
open_last_lookups fs/namei.c:3481 [inline]
path_openat+0x804/0x11c4 fs/namei.c:3688
do_filp_open+0xdc/0x1b8 fs/namei.c:3718
do_sys_openat2+0xb8/0x22c fs/open.c:1311
do_sys_open fs/open.c:1327 [inline]
__do_sys_openat fs/open.c:1343 [inline]
__se_sys_openat fs/open.c:1338 [inline]
__arm64_sys_openat+0xb0/0xe0 fs/open.c:1338
__invoke_syscall arch/arm64/kernel/syscall.c:38 [inline]
invoke_syscall arch/arm64/kernel/syscall.c:52 [inline]
el0_svc_common+0x138/0x220 arch/arm64/kernel/syscall.c:142
do_el0_svc+0x48/0x164 arch/arm64/kernel/syscall.c:206
el0_svc+0x58/0x150 arch/arm64/kernel/entry-common.c:636
el0t_64_sync_handler+0x84/0xf0 arch/arm64/kernel/entry-common.c:654
el0t_64_sync+0x18c/0x190
Code: 97dafee4 340001b4 f9401328 2a1f03e0 (79402d14)
---[ end trace 0000000000000000 ]---
Above issue may happens as follows:
ntfs_new_inode
mi_init
mi->mrec = kmalloc(sbi->record_size, GFP_NOFS); -->failed to allocate memory
if (!mi->mrec)
return -ENOMEM;
iput
iput_final
evict
ntfs_evict_inode
ni_write_inode
is_rec_inuse(ni->mi.mrec)-> As 'ni->mi.mrec' is NULL trigger NULL-ptr-deref
To solve above issue if new inode failed make inode bad before call 'iput()' in
'ntfs_new_inode()'. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: apple-admac: Fix 'current_tx' not getting freed
In terminate_all we should queue up all submitted descriptors to be
freed. We do that for the content of the 'issued' and 'submitted' lists,
but the 'current_tx' descriptor falls through the cracks as it's
removed from the 'issued' list once it gets assigned to be the current
descriptor. Explicitly queue up freeing of the 'current_tx' descriptor
to address a memory leak that is otherwise present. |
