| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| RIOT is an open-source microcontroller operating system, designed to match the requirements of Internet of Things (IoT) devices and other embedded devices. A malicious actor can send a IEEE 802.15.4 packet with spoofed length byte and optionally spoofed FCS, which eventually results into an endless loop on a CC2538 as receiver. Before PR #20998, the receiver would check for the location of the CRC bit using the packet length byte by considering all 8 bits, instead of discarding bit 7, which is what the radio does. This then results into reading outside of the RX FIFO. Although it prints an error when attempting to read outside of the RX FIFO, it will continue doing this. This may lead to a discrepancy in the CRC check according to the firmware and the radio. If the CPU judges the CRC as correct and the radio is set to `AUTO_ACK`, when the packet requests and acknowledgment the CPU will go into the state `CC2538_STATE_TX_ACK`. However, if the radio judged the CRC as incorrect, it will not send an acknowledgment, and thus the `TXACKDONE` event will not fire. It will then never return to the state `CC2538_STATE_READY` since the baseband processing is still disabled. Then the CPU will be in an endless loop. Since setting to idle is not forced, it won't do it if the radio's state is not `CC2538_STATE_READY`. A fix has not yet been made. |
| An issue in kmqtt v0.2.7 allows attackers to cause a Denial of Service (DoS) via a crafted request. |
| RIOT is a real-time multi-threading operating system that supports a range of devices that are typically 8-bit, 16-bit and 32-bit microcontrollers. Most codebases define assertion macros which compile to a no-op on non-debug builds. If assertions are the only line of defense against untrusted input, the software may be exposed to attacks that leverage the lack of proper input checks. In detail, in the `nimble_scanlist_update()` function below, `len` is checked in an assertion and subsequently used in a call to `memcpy()`. If an attacker is able to provide a larger `len` value while assertions are compiled-out, they can write past the end of the fixed-length `e->ad` buffer. If the unchecked input above is attacker-controlled and crosses a security boundary, the impact of the buffer overflow vulnerability could range from denial of service to arbitrary code execution. This issue has not yet been patched. Users are advised to add manual `len` checking. |
| An authenticated attacker can trigger a stack based buffer overflow in the DHIP Service (TCP port 80). This vulnerability has been resolved in firmware version 2.800.0000000.8.R.20241111. |
| Velocidex WinPmem versions 4.1 and below suffer from an Improper Input Validation vulnerability whereby an attacker with admin access can trigger a BSOD with a parallel thread changing the memory’s access right under the control of the user-mode application. This is due to verification only being performed at the beginning of the routine allowing the userspace to change page permissions half way through the routine. A valid workaround is a rule to detect unauthorized loading of winpmem outside incident response operations. |
| Unauthorized access vulnerability in the mobile application (com.transsion.phoenix) can lead to the leakage of user information. |
| ColdFusion versions 2023.12, 2021.18, 2025.0 and earlier are affected by an Improper Access Control vulnerability that could result in a Security feature bypass. A low privileged attacker with local access could leverage this vulnerability to bypass security protections and execute code. Exploitation of this issue requires user interaction in that a victim must be coerced into performing actions within the application and scope is changed. |
| ColdFusion versions 2023.12, 2021.18, 2025.0 and earlier are affected by an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability that could lead in arbitrary code execution by an attacker. A low privileged attacker with local access could leverage this vulnerability to bypass security protections and execute code. Exploitation of this issue requires user interaction in that a victim must be coerced into performing actions within the application. Scope is changed. |
| ColdFusion versions 2023.12, 2021.18, 2025.0 and earlier are affected by a Deserialization of Untrusted Data vulnerability that could result in arbitrary code execution in the context of the current user. A high-privileged attacker could leverage this vulnerability to bypass security protections and execute code. Exploitation of this issue requires user interaction and scope is changed. |
| CyberPanel before 2.3.8 allows remote authenticated users to execute arbitrary commands via shell metacharacters in the phpSelection field to the websites/submitWebsiteCreation URI. |
| The edit profile function of Grocy through 4.3.0 allows stored XSS and resultant privilege escalation by uploading a crafted HTML or SVG file, a different issue than CVE-2024-8370. |
| A heap-based buffer overflow in tsMuxer version nightly-2024-03-14-01-51-12 allows attackers to cause Denial of Service (DoS) and Code Execution via a crafted MOV video file. |
| A heap-based buffer overflow in tsMuxer version nightly-2024-03-14-01-51-12 allows attackers to cause Denial of Service (DoS), Information Disclosure and Code Execution via a crafted MKV video file. |
| A heap-based buffer overflow in tsMuxer version nightly-2024-05-12-02-01-18 allows attackers to cause Denial of Service (DoS) and Code Execution via a crafted MOV video file. |
| A security agent manual scan command injection vulnerability in the Trend Micro Deep Security 20 Agent could allow an attacker to escalate privileges and execute arbitrary code on an affected machine. In certain circumstances, attackers that have legitimate access to the domain may be able to remotely inject commands to other machines in the same domain.
Please note: an attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability locally and must have domain user privileges to affect other machines. |
| RIOT is an operating system for internet of things (IoT) devices. In version 2024.04 and prior, the function `_parse_advertise`, located in `/sys/net/application_layer/dhcpv6/client.c`, has no minimum header length check for `dhcpv6_opt_t` after processing `dhcpv6_msg_t`. This omission could lead to an out-of-bound read, causing system inconsistency. Additionally, the same lack of a header length check is present in the function `_preparse_advertise`, which is called by `_parse_advertise` before handling the request. As of time of publication, no known patched version exists. |
| Improper Restriction of Excessive Authentication Attempts vulnerability in Akinsoft TaskPano allows Authentication Bypass.This issue affects TaskPano: from s1.06.04 before v1.06.06. |
| Improper Restriction of Excessive Authentication Attempts vulnerability in Akinsoft e-Mutabakat allows Authentication Bypass.This issue affects e-Mutabakat: from 2.02.06 before v2.02.06. |
| Envoy is a cloud-native, open source edge and service proxy. When an upstream TLS cluster is used with `auto_sni` enabled, a request containing a `host`/`:authority` header longer than 255 characters triggers an abnormal termination of Envoy process. Envoy does not gracefully handle an error when setting SNI for outbound TLS connection. The error can occur when Envoy attempts to use the `host`/`:authority` header value longer than 255 characters as SNI for outbound TLS connection. SNI length is limited to 255 characters per the standard. Envoy always expects this operation to succeed and abnormally aborts the process when it fails. This vulnerability is fixed in 1.30.1, 1.29.4, 1.28.3, and 1.27.5.
|
| Deno is a JavaScript, TypeScript, and WebAssembly runtime with secure defaults. The Deno sandbox may be unexpectedly weakened by allowing file read/write access to privileged files in various locations on Unix and Windows platforms. For example, reading `/proc/self/environ` may provide access equivalent to `--allow-env`, and writing `/proc/self/mem` may provide access equivalent to `--allow-all`. Users who grant read and write access to the entire filesystem may not realize that these access to these files may have additional, unintended consequences. The documentation did not reflect that this practice should be undertaken to increase the strength of the security sandbox. Users who run code with `--allow-read` or `--allow-write` may unexpectedly end up granting additional permissions via file-system operations. Deno 1.43 and above require explicit `--allow-all` access to read or write `/etc`, `/dev` on unix platform (as well as `/proc` and `/sys` on linux platforms), and any path starting with `\\` on Windows.
|
