| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
pwm: mediatek: Prevent divide-by-zero in pwm_mediatek_config()
With CONFIG_COMPILE_TEST && !CONFIG_HAVE_CLK, pwm_mediatek_config() has a
divide-by-zero in the following line:
do_div(resolution, clk_get_rate(pc->clk_pwms[pwm->hwpwm]));
due to the fact that the !CONFIG_HAVE_CLK version of clk_get_rate()
returns zero.
This is presumably just a theoretical problem: COMPILE_TEST overrides
the dependency on RALINK which would select COMMON_CLK. Regardless it's
a good idea to check for the error explicitly to avoid divide-by-zero.
Fixes the following warning:
drivers/pwm/pwm-mediatek.o: warning: objtool: .text: unexpected end of section
[ukleinek: s/CONFIG_CLK/CONFIG_HAVE_CLK/] |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: omapfb: Add 'plane' value check
Function dispc_ovl_setup is not intended to work with the value OMAP_DSS_WB
of the enum parameter plane.
The value of this parameter is initialized in dss_init_overlays and in the
current state of the code it cannot take this value so it's not a real
problem.
For the purposes of defensive coding it wouldn't be superfluous to check
the parameter value, because some functions down the call stack process
this value correctly and some not.
For example, in dispc_ovl_setup_global_alpha it may lead to buffer
overflow.
Add check for this value.
Found by Linux Verification Center (linuxtesting.org) with SVACE static
analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Fix mode1 reset crash issue
If HW scheduler hangs and mode1 reset is used to recover GPU, KFD signal
user space to abort the processes. After process abort exit, user queues
still use the GPU to access system memory before h/w is reset while KFD
cleanup worker free system memory and free VRAM.
There is use-after-free race bug that KFD allocate and reuse the freed
system memory, and user queue write to the same system memory to corrupt
the data structure and cause driver crash.
To fix this race, KFD cleanup worker terminate user queues, then flush
reset_domain wq to wait for any GPU ongoing reset complete, and then
free outstanding BOs. |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: rawnand: brcmnand: fix PM resume warning
Fixed warning on PM resume as shown below caused due to uninitialized
struct nand_operation that checks chip select field :
WARN_ON(op->cs >= nanddev_ntargets(&chip->base)
[ 14.588522] ------------[ cut here ]------------
[ 14.588529] WARNING: CPU: 0 PID: 1392 at drivers/mtd/nand/raw/internals.h:139 nand_reset_op+0x1e0/0x1f8
[ 14.588553] Modules linked in: bdc udc_core
[ 14.588579] CPU: 0 UID: 0 PID: 1392 Comm: rtcwake Tainted: G W 6.14.0-rc4-g5394eea10651 #16
[ 14.588590] Tainted: [W]=WARN
[ 14.588593] Hardware name: Broadcom STB (Flattened Device Tree)
[ 14.588598] Call trace:
[ 14.588604] dump_backtrace from show_stack+0x18/0x1c
[ 14.588622] r7:00000009 r6:0000008b r5:60000153 r4:c0fa558c
[ 14.588625] show_stack from dump_stack_lvl+0x70/0x7c
[ 14.588639] dump_stack_lvl from dump_stack+0x18/0x1c
[ 14.588653] r5:c08d40b0 r4:c1003cb0
[ 14.588656] dump_stack from __warn+0x84/0xe4
[ 14.588668] __warn from warn_slowpath_fmt+0x18c/0x194
[ 14.588678] r7:c08d40b0 r6:c1003cb0 r5:00000000 r4:00000000
[ 14.588681] warn_slowpath_fmt from nand_reset_op+0x1e0/0x1f8
[ 14.588695] r8:70c40dff r7:89705f41 r6:36b4a597 r5:c26c9444 r4:c26b0048
[ 14.588697] nand_reset_op from brcmnand_resume+0x13c/0x150
[ 14.588714] r9:00000000 r8:00000000 r7:c24f8010 r6:c228a3f8 r5:c26c94bc r4:c26b0040
[ 14.588717] brcmnand_resume from platform_pm_resume+0x34/0x54
[ 14.588735] r5:00000010 r4:c0840a50
[ 14.588738] platform_pm_resume from dpm_run_callback+0x5c/0x14c
[ 14.588757] dpm_run_callback from device_resume+0xc0/0x324
[ 14.588776] r9:c24f8054 r8:c24f80a0 r7:00000000 r6:00000000 r5:00000010 r4:c24f8010
[ 14.588779] device_resume from dpm_resume+0x130/0x160
[ 14.588799] r9:c22539e4 r8:00000010 r7:c22bebb0 r6:c24f8010 r5:c22539dc r4:c22539b0
[ 14.588802] dpm_resume from dpm_resume_end+0x14/0x20
[ 14.588822] r10:c2204e40 r9:00000000 r8:c228a3fc r7:00000000 r6:00000003 r5:c228a414
[ 14.588826] r4:00000010
[ 14.588828] dpm_resume_end from suspend_devices_and_enter+0x274/0x6f8
[ 14.588848] r5:c228a414 r4:00000000
[ 14.588851] suspend_devices_and_enter from pm_suspend+0x228/0x2bc
[ 14.588868] r10:c3502910 r9:c3501f40 r8:00000004 r7:c228a438 r6:c0f95e18 r5:00000000
[ 14.588871] r4:00000003
[ 14.588874] pm_suspend from state_store+0x74/0xd0
[ 14.588889] r7:c228a438 r6:c0f934c8 r5:00000003 r4:00000003
[ 14.588892] state_store from kobj_attr_store+0x1c/0x28
[ 14.588913] r9:00000000 r8:00000000 r7:f09f9f08 r6:00000004 r5:c3502900 r4:c0283250
[ 14.588916] kobj_attr_store from sysfs_kf_write+0x40/0x4c
[ 14.588936] r5:c3502900 r4:c0d92a48
[ 14.588939] sysfs_kf_write from kernfs_fop_write_iter+0x104/0x1f0
[ 14.588956] r5:c3502900 r4:c3501f40
[ 14.588960] kernfs_fop_write_iter from vfs_write+0x250/0x420
[ 14.588980] r10:c0e14b48 r9:00000000 r8:c25f5780 r7:00443398 r6:f09f9f68 r5:c34f7f00
[ 14.588983] r4:c042a88c
[ 14.588987] vfs_write from ksys_write+0x74/0xe4
[ 14.589005] r10:00000004 r9:c25f5780 r8:c02002fA0 r7:00000000 r6:00000000 r5:c34f7f00
[ 14.589008] r4:c34f7f00
[ 14.589011] ksys_write from sys_write+0x10/0x14
[ 14.589029] r7:00000004 r6:004421c0 r5:00443398 r4:00000004
[ 14.589032] sys_write from ret_fast_syscall+0x0/0x5c
[ 14.589044] Exception stack(0xf09f9fa8 to 0xf09f9ff0)
[ 14.589050] 9fa0: 00000004 00443398 00000004 00443398 00000004 00000001
[ 14.589056] 9fc0: 00000004 00443398 004421c0 00000004 b6ecbd58 00000008 bebfbc38 0043eb78
[ 14.589062] 9fe0: 00440eb0 bebfbaf8 b6de18a0 b6e579e8
[ 14.589065] ---[ end trace 0000000000000000 ]---
The fix uses the higher level nand_reset(chip, chipnr); where chipnr = 0, when
doing PM resume operation in compliance with the controller support for single
die nand chip. Switching from nand_reset_op() to nan
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Fix use-after-free of encap entry in neigh update handler
Function mlx5e_rep_neigh_update() wasn't updated to accommodate rtnl lock
removal from TC filter update path and properly handle concurrent encap
entry insertion/deletion which can lead to following use-after-free:
[23827.464923] ==================================================================
[23827.469446] BUG: KASAN: use-after-free in mlx5e_encap_take+0x72/0x140 [mlx5_core]
[23827.470971] Read of size 4 at addr ffff8881d132228c by task kworker/u20:6/21635
[23827.472251]
[23827.472615] CPU: 9 PID: 21635 Comm: kworker/u20:6 Not tainted 5.13.0-rc3+ #5
[23827.473788] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[23827.475639] Workqueue: mlx5e mlx5e_rep_neigh_update [mlx5_core]
[23827.476731] Call Trace:
[23827.477260] dump_stack+0xbb/0x107
[23827.477906] print_address_description.constprop.0+0x18/0x140
[23827.478896] ? mlx5e_encap_take+0x72/0x140 [mlx5_core]
[23827.479879] ? mlx5e_encap_take+0x72/0x140 [mlx5_core]
[23827.480905] kasan_report.cold+0x7c/0xd8
[23827.481701] ? mlx5e_encap_take+0x72/0x140 [mlx5_core]
[23827.482744] kasan_check_range+0x145/0x1a0
[23827.493112] mlx5e_encap_take+0x72/0x140 [mlx5_core]
[23827.494054] ? mlx5e_tc_tun_encap_info_equal_generic+0x140/0x140 [mlx5_core]
[23827.495296] mlx5e_rep_neigh_update+0x41e/0x5e0 [mlx5_core]
[23827.496338] ? mlx5e_rep_neigh_entry_release+0xb80/0xb80 [mlx5_core]
[23827.497486] ? read_word_at_a_time+0xe/0x20
[23827.498250] ? strscpy+0xa0/0x2a0
[23827.498889] process_one_work+0x8ac/0x14e0
[23827.499638] ? lockdep_hardirqs_on_prepare+0x400/0x400
[23827.500537] ? pwq_dec_nr_in_flight+0x2c0/0x2c0
[23827.501359] ? rwlock_bug.part.0+0x90/0x90
[23827.502116] worker_thread+0x53b/0x1220
[23827.502831] ? process_one_work+0x14e0/0x14e0
[23827.503627] kthread+0x328/0x3f0
[23827.504254] ? _raw_spin_unlock_irq+0x24/0x40
[23827.505065] ? __kthread_bind_mask+0x90/0x90
[23827.505912] ret_from_fork+0x1f/0x30
[23827.506621]
[23827.506987] Allocated by task 28248:
[23827.507694] kasan_save_stack+0x1b/0x40
[23827.508476] __kasan_kmalloc+0x7c/0x90
[23827.509197] mlx5e_attach_encap+0xde1/0x1d40 [mlx5_core]
[23827.510194] mlx5e_tc_add_fdb_flow+0x397/0xc40 [mlx5_core]
[23827.511218] __mlx5e_add_fdb_flow+0x519/0xb30 [mlx5_core]
[23827.512234] mlx5e_configure_flower+0x191c/0x4870 [mlx5_core]
[23827.513298] tc_setup_cb_add+0x1d5/0x420
[23827.514023] fl_hw_replace_filter+0x382/0x6a0 [cls_flower]
[23827.514975] fl_change+0x2ceb/0x4a51 [cls_flower]
[23827.515821] tc_new_tfilter+0x89a/0x2070
[23827.516548] rtnetlink_rcv_msg+0x644/0x8c0
[23827.517300] netlink_rcv_skb+0x11d/0x340
[23827.518021] netlink_unicast+0x42b/0x700
[23827.518742] netlink_sendmsg+0x743/0xc20
[23827.519467] sock_sendmsg+0xb2/0xe0
[23827.520131] ____sys_sendmsg+0x590/0x770
[23827.520851] ___sys_sendmsg+0xd8/0x160
[23827.521552] __sys_sendmsg+0xb7/0x140
[23827.522238] do_syscall_64+0x3a/0x70
[23827.522907] entry_SYSCALL_64_after_hwframe+0x44/0xae
[23827.523797]
[23827.524163] Freed by task 25948:
[23827.524780] kasan_save_stack+0x1b/0x40
[23827.525488] kasan_set_track+0x1c/0x30
[23827.526187] kasan_set_free_info+0x20/0x30
[23827.526968] __kasan_slab_free+0xed/0x130
[23827.527709] slab_free_freelist_hook+0xcf/0x1d0
[23827.528528] kmem_cache_free_bulk+0x33a/0x6e0
[23827.529317] kfree_rcu_work+0x55f/0xb70
[23827.530024] process_one_work+0x8ac/0x14e0
[23827.530770] worker_thread+0x53b/0x1220
[23827.531480] kthread+0x328/0x3f0
[23827.532114] ret_from_fork+0x1f/0x30
[23827.532785]
[23827.533147] Last potentially related work creation:
[23827.534007] kasan_save_stack+0x1b/0x40
[23827.534710] kasan_record_aux_stack+0xab/0xc0
[23827.535492] kvfree_call_rcu+0x31/0x7b0
[23827.536206] mlx5e_tc_del
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
usb: dwc3: gadget: check that event count does not exceed event buffer length
The event count is read from register DWC3_GEVNTCOUNT.
There is a check for the count being zero, but not for exceeding the
event buffer length.
Check that event count does not exceed event buffer length,
avoiding an out-of-bounds access when memcpy'ing the event.
Crash log:
Unable to handle kernel paging request at virtual address ffffffc0129be000
pc : __memcpy+0x114/0x180
lr : dwc3_check_event_buf+0xec/0x348
x3 : 0000000000000030 x2 : 000000000000dfc4
x1 : ffffffc0129be000 x0 : ffffff87aad60080
Call trace:
__memcpy+0x114/0x180
dwc3_interrupt+0x24/0x34 |
| In the Linux kernel, the following vulnerability has been resolved:
usb: cdns3: Fix deadlock when using NCM gadget
The cdns3 driver has the same NCM deadlock as fixed in cdnsp by commit
58f2fcb3a845 ("usb: cdnsp: Fix deadlock issue during using NCM gadget").
Under PREEMPT_RT the deadlock can be readily triggered by heavy network
traffic, for example using "iperf --bidir" over NCM ethernet link.
The deadlock occurs because the threaded interrupt handler gets
preempted by a softirq, but both are protected by the same spinlock.
Prevent deadlock by disabling softirq during threaded irq handler. |
| In the Linux kernel, the following vulnerability has been resolved:
mcb: fix a double free bug in chameleon_parse_gdd()
In chameleon_parse_gdd(), if mcb_device_register() fails, 'mdev'
would be released in mcb_device_register() via put_device().
Thus, goto 'err' label and free 'mdev' again causes a double free.
Just return if mcb_device_register() fails. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: Return NULL from huge_pte_offset() for invalid PMD
LoongArch's huge_pte_offset() currently returns a pointer to a PMD slot
even if the underlying entry points to invalid_pte_table (indicating no
mapping). Callers like smaps_hugetlb_range() fetch this invalid entry
value (the address of invalid_pte_table) via this pointer.
The generic is_swap_pte() check then incorrectly identifies this address
as a swap entry on LoongArch, because it satisfies the "!pte_present()
&& !pte_none()" conditions. This misinterpretation, combined with a
coincidental match by is_migration_entry() on the address bits, leads to
kernel crashes in pfn_swap_entry_to_page().
Fix this at the architecture level by modifying huge_pte_offset() to
check the PMD entry's content using pmd_none() before returning. If the
entry is invalid (i.e., it points to invalid_pte_table), return NULL
instead of the pointer to the slot. |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: inftlcore: Add error check for inftl_read_oob()
In INFTL_findwriteunit(), the return value of inftl_read_oob()
need to be checked. A proper implementation can be
found in INFTL_deleteblock(). The status will be set as
SECTOR_IGNORE to break from the while-loop correctly
if the inftl_read_oob() fails. |
| In the Linux kernel, the following vulnerability has been resolved:
net: dsa: mv88e6xxx: fix -ENOENT when deleting VLANs and MST is unsupported
Russell King reports that on the ZII dev rev B, deleting a bridge VLAN
from a user port fails with -ENOENT:
https://lore.kernel.org/netdev/[email protected]/
This comes from mv88e6xxx_port_vlan_leave() -> mv88e6xxx_mst_put(),
which tries to find an MST entry in &chip->msts associated with the SID,
but fails and returns -ENOENT as such.
But we know that this chip does not support MST at all, so that is not
surprising. The question is why does the guard in mv88e6xxx_mst_put()
not exit early:
if (!sid)
return 0;
And the answer seems to be simple: the sid comes from vlan.sid which
supposedly was previously populated by mv88e6xxx_vtu_get().
But some chip->info->ops->vtu_getnext() implementations do not populate
vlan.sid, for example see mv88e6185_g1_vtu_getnext(). In that case,
later in mv88e6xxx_port_vlan_leave() we are using a garbage sid which is
just residual stack memory.
Testing for sid == 0 covers all cases of a non-bridge VLAN or a bridge
VLAN mapped to the default MSTI. For some chips, SID 0 is valid and
installed by mv88e6xxx_stu_setup(). A chip which does not support the
STU would implicitly only support mapping all VLANs to the default MSTI,
so although SID 0 is not valid, it would be sufficient, if we were to
zero-initialize the vlan structure, to fix the bug, due to the
coincidence that a test for vlan.sid == 0 already exists and leads to
the same (correct) behavior.
Another option which would be sufficient would be to add a test for
mv88e6xxx_has_stu() inside mv88e6xxx_mst_put(), symmetric to the one
which already exists in mv88e6xxx_mst_get(). But that placement means
the caller will have to dereference vlan.sid, which means it will access
uninitialized memory, which is not nice even if it ignores it later.
So we end up making both modifications, in order to not rely just on the
sid == 0 coincidence, but also to avoid having uninitialized structure
fields which might get temporarily accessed. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: aspeed: Add NULL pointer check in ast_vhub_init_dev()
The variable d->name, returned by devm_kasprintf(), could be NULL.
A pointer check is added to prevent potential NULL pointer dereference.
This is similar to the fix in commit 3027e7b15b02
("ice: Fix some null pointer dereference issues in ice_ptp.c").
This issue is found by our static analysis tool |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix oob write in trace_seq_to_buffer()
syzbot reported this bug:
==================================================================
BUG: KASAN: slab-out-of-bounds in trace_seq_to_buffer kernel/trace/trace.c:1830 [inline]
BUG: KASAN: slab-out-of-bounds in tracing_splice_read_pipe+0x6be/0xdd0 kernel/trace/trace.c:6822
Write of size 4507 at addr ffff888032b6b000 by task syz.2.320/7260
CPU: 1 UID: 0 PID: 7260 Comm: syz.2.320 Not tainted 6.15.0-rc1-syzkaller-00301-g3bde70a2c827 #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:408 [inline]
print_report+0xc3/0x670 mm/kasan/report.c:521
kasan_report+0xe0/0x110 mm/kasan/report.c:634
check_region_inline mm/kasan/generic.c:183 [inline]
kasan_check_range+0xef/0x1a0 mm/kasan/generic.c:189
__asan_memcpy+0x3c/0x60 mm/kasan/shadow.c:106
trace_seq_to_buffer kernel/trace/trace.c:1830 [inline]
tracing_splice_read_pipe+0x6be/0xdd0 kernel/trace/trace.c:6822
....
==================================================================
It has been reported that trace_seq_to_buffer() tries to copy more data
than PAGE_SIZE to buf. Therefore, to prevent this, we should use the
smaller of trace_seq_used(&iter->seq) and PAGE_SIZE as an argument. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/amd: Fix potential buffer overflow in parse_ivrs_acpihid
There is a string parsing logic error which can lead to an overflow of hid
or uid buffers. Comparing ACPIID_LEN against a total string length doesn't
take into account the lengths of individual hid and uid buffers so the
check is insufficient in some cases. For example if the length of hid
string is 4 and the length of the uid string is 260, the length of str
will be equal to ACPIID_LEN + 1 but uid string will overflow uid buffer
which size is 256.
The same applies to the hid string with length 13 and uid string with
length 250.
Check the length of hid and uid strings separately to prevent
buffer overflow.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: errata: Add missing sentinels to Spectre-BHB MIDR arrays
Commit a5951389e58d ("arm64: errata: Add newer ARM cores to the
spectre_bhb_loop_affected() lists") added some additional CPUs to the
Spectre-BHB workaround, including some new arrays for designs that
require new 'k' values for the workaround to be effective.
Unfortunately, the new arrays omitted the sentinel entry and so
is_midr_in_range_list() will walk off the end when it doesn't find a
match. With UBSAN enabled, this leads to a crash during boot when
is_midr_in_range_list() is inlined (which was more common prior to
c8c2647e69be ("arm64: Make _midr_in_range_list() an exported
function")):
| Internal error: aarch64 BRK: 00000000f2000001 [#1] PREEMPT SMP
| pstate: 804000c5 (Nzcv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
| pc : spectre_bhb_loop_affected+0x28/0x30
| lr : is_spectre_bhb_affected+0x170/0x190
| [...]
| Call trace:
| spectre_bhb_loop_affected+0x28/0x30
| update_cpu_capabilities+0xc0/0x184
| init_cpu_features+0x188/0x1a4
| cpuinfo_store_boot_cpu+0x4c/0x60
| smp_prepare_boot_cpu+0x38/0x54
| start_kernel+0x8c/0x478
| __primary_switched+0xc8/0xd4
| Code: 6b09011f 54000061 52801080 d65f03c0 (d4200020)
| ---[ end trace 0000000000000000 ]---
| Kernel panic - not syncing: aarch64 BRK: Fatal exception
Add the missing sentinel entries. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau: Fix WARN_ON in nouveau_fence_context_kill()
Nouveau is mostly designed in a way that it's expected that fences only
ever get signaled through nouveau_fence_signal(). However, in at least
one other place, nouveau_fence_done(), can signal fences, too. If that
happens (race) a signaled fence remains in the pending list for a while,
until it gets removed by nouveau_fence_update().
Should nouveau_fence_context_kill() run in the meantime, this would be
a bug because the function would attempt to set an error code on an
already signaled fence.
Have nouveau_fence_context_kill() check for a fence being signaled. |
| In the Linux kernel, the following vulnerability has been resolved:
net_sched: skbprio: Remove overly strict queue assertions
In the current implementation, skbprio enqueue/dequeue contains an assertion
that fails under certain conditions when SKBPRIO is used as a child qdisc under
TBF with specific parameters. The failure occurs because TBF sometimes peeks at
packets in the child qdisc without actually dequeuing them when tokens are
unavailable.
This peek operation creates a discrepancy between the parent and child qdisc
queue length counters. When TBF later receives a high-priority packet,
SKBPRIO's queue length may show a different value than what's reflected in its
internal priority queue tracking, triggering the assertion.
The fix removes this overly strict assertions in SKBPRIO, they are not
necessary at all. |
| In the Linux kernel, the following vulnerability has been resolved:
isofs: Prevent the use of too small fid
syzbot reported a slab-out-of-bounds Read in isofs_fh_to_parent. [1]
The handle_bytes value passed in by the reproducing program is equal to 12.
In handle_to_path(), only 12 bytes of memory are allocated for the structure
file_handle->f_handle member, which causes an out-of-bounds access when
accessing the member parent_block of the structure isofs_fid in isofs,
because accessing parent_block requires at least 16 bytes of f_handle.
Here, fh_len is used to indirectly confirm that the value of handle_bytes
is greater than 3 before accessing parent_block.
[1]
BUG: KASAN: slab-out-of-bounds in isofs_fh_to_parent+0x1b8/0x210 fs/isofs/export.c:183
Read of size 4 at addr ffff0000cc030d94 by task syz-executor215/6466
CPU: 1 UID: 0 PID: 6466 Comm: syz-executor215 Not tainted 6.14.0-rc7-syzkaller-ga2392f333575 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025
Call trace:
show_stack+0x2c/0x3c arch/arm64/kernel/stacktrace.c:466 (C)
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0xe4/0x150 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:408 [inline]
print_report+0x198/0x550 mm/kasan/report.c:521
kasan_report+0xd8/0x138 mm/kasan/report.c:634
__asan_report_load4_noabort+0x20/0x2c mm/kasan/report_generic.c:380
isofs_fh_to_parent+0x1b8/0x210 fs/isofs/export.c:183
exportfs_decode_fh_raw+0x2dc/0x608 fs/exportfs/expfs.c:523
do_handle_to_path+0xa0/0x198 fs/fhandle.c:257
handle_to_path fs/fhandle.c:385 [inline]
do_handle_open+0x8cc/0xb8c fs/fhandle.c:403
__do_sys_open_by_handle_at fs/fhandle.c:443 [inline]
__se_sys_open_by_handle_at fs/fhandle.c:434 [inline]
__arm64_sys_open_by_handle_at+0x80/0x94 fs/fhandle.c:434
__invoke_syscall arch/arm64/kernel/syscall.c:35 [inline]
invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:49
el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:132
do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:151
el0_svc+0x54/0x168 arch/arm64/kernel/entry-common.c:744
el0t_64_sync_handler+0x84/0x108 arch/arm64/kernel/entry-common.c:762
el0t_64_sync+0x198/0x19c arch/arm64/kernel/entry.S:600
Allocated by task 6466:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x40/0x78 mm/kasan/common.c:68
kasan_save_alloc_info+0x40/0x50 mm/kasan/generic.c:562
poison_kmalloc_redzone mm/kasan/common.c:377 [inline]
__kasan_kmalloc+0xac/0xc4 mm/kasan/common.c:394
kasan_kmalloc include/linux/kasan.h:260 [inline]
__do_kmalloc_node mm/slub.c:4294 [inline]
__kmalloc_noprof+0x32c/0x54c mm/slub.c:4306
kmalloc_noprof include/linux/slab.h:905 [inline]
handle_to_path fs/fhandle.c:357 [inline]
do_handle_open+0x5a4/0xb8c fs/fhandle.c:403
__do_sys_open_by_handle_at fs/fhandle.c:443 [inline]
__se_sys_open_by_handle_at fs/fhandle.c:434 [inline]
__arm64_sys_open_by_handle_at+0x80/0x94 fs/fhandle.c:434
__invoke_syscall arch/arm64/kernel/syscall.c:35 [inline]
invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:49
el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:132
do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:151
el0_svc+0x54/0x168 arch/arm64/kernel/entry-common.c:744
el0t_64_sync_handler+0x84/0x108 arch/arm64/kernel/entry-common.c:762
el0t_64_sync+0x198/0x19c arch/arm64/kernel/entry.S:600 |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: cros-ec-tunnel: defer probe if parent EC is not present
When i2c-cros-ec-tunnel and the EC driver are built-in, the EC parent
device will not be found, leading to NULL pointer dereference.
That can also be reproduced by unbinding the controller driver and then
loading i2c-cros-ec-tunnel module (or binding the device).
[ 271.991245] BUG: kernel NULL pointer dereference, address: 0000000000000058
[ 271.998215] #PF: supervisor read access in kernel mode
[ 272.003351] #PF: error_code(0x0000) - not-present page
[ 272.008485] PGD 0 P4D 0
[ 272.011022] Oops: Oops: 0000 [#1] SMP NOPTI
[ 272.015207] CPU: 0 UID: 0 PID: 3859 Comm: insmod Tainted: G S 6.15.0-rc1-00004-g44722359ed83 #30 PREEMPT(full) 3c7fb39a552e7d949de2ad921a7d6588d3a4fdc5
[ 272.030312] Tainted: [S]=CPU_OUT_OF_SPEC
[ 272.034233] Hardware name: HP Berknip/Berknip, BIOS Google_Berknip.13434.356.0 05/17/2021
[ 272.042400] RIP: 0010:ec_i2c_probe+0x2b/0x1c0 [i2c_cros_ec_tunnel]
[ 272.048577] Code: 1f 44 00 00 41 57 41 56 41 55 41 54 53 48 83 ec 10 65 48 8b 05 06 a0 6c e7 48 89 44 24 08 4c 8d 7f 10 48 8b 47 50 4c 8b 60 78 <49> 83 7c 24 58 00 0f 84 2f 01 00 00 48 89 fb be 30 06 00 00 4c 9
[ 272.067317] RSP: 0018:ffffa32082a03940 EFLAGS: 00010282
[ 272.072541] RAX: ffff969580b6a810 RBX: ffff969580b68c10 RCX: 0000000000000000
[ 272.079672] RDX: 0000000000000000 RSI: 0000000000000282 RDI: ffff969580b68c00
[ 272.086804] RBP: 00000000fffffdfb R08: 0000000000000000 R09: 0000000000000000
[ 272.093936] R10: 0000000000000000 R11: ffffffffc0600000 R12: 0000000000000000
[ 272.101067] R13: ffffffffa666fbb8 R14: ffffffffc05b5528 R15: ffff969580b68c10
[ 272.108198] FS: 00007b930906fc40(0000) GS:ffff969603149000(0000) knlGS:0000000000000000
[ 272.116282] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 272.122024] CR2: 0000000000000058 CR3: 000000012631c000 CR4: 00000000003506f0
[ 272.129155] Call Trace:
[ 272.131606] <TASK>
[ 272.133709] ? acpi_dev_pm_attach+0xdd/0x110
[ 272.137985] platform_probe+0x69/0xa0
[ 272.141652] really_probe+0x152/0x310
[ 272.145318] __driver_probe_device+0x77/0x110
[ 272.149678] driver_probe_device+0x1e/0x190
[ 272.153864] __driver_attach+0x10b/0x1e0
[ 272.157790] ? driver_attach+0x20/0x20
[ 272.161542] bus_for_each_dev+0x107/0x150
[ 272.165553] bus_add_driver+0x15d/0x270
[ 272.169392] driver_register+0x65/0x110
[ 272.173232] ? cleanup_module+0xa80/0xa80 [i2c_cros_ec_tunnel 3a00532f3f4af4a9eade753f86b0f8dd4e4e5698]
[ 272.182617] do_one_initcall+0x110/0x350
[ 272.186543] ? security_kernfs_init_security+0x49/0xd0
[ 272.191682] ? __kernfs_new_node+0x1b9/0x240
[ 272.195954] ? security_kernfs_init_security+0x49/0xd0
[ 272.201093] ? __kernfs_new_node+0x1b9/0x240
[ 272.205365] ? kernfs_link_sibling+0x105/0x130
[ 272.209810] ? kernfs_next_descendant_post+0x1c/0xa0
[ 272.214773] ? kernfs_activate+0x57/0x70
[ 272.218699] ? kernfs_add_one+0x118/0x160
[ 272.222710] ? __kernfs_create_file+0x71/0xa0
[ 272.227069] ? sysfs_add_bin_file_mode_ns+0xd6/0x110
[ 272.232033] ? internal_create_group+0x453/0x4a0
[ 272.236651] ? __vunmap_range_noflush+0x214/0x2d0
[ 272.241355] ? __free_frozen_pages+0x1dc/0x420
[ 272.245799] ? free_vmap_area_noflush+0x10a/0x1c0
[ 272.250505] ? load_module+0x1509/0x16f0
[ 272.254431] do_init_module+0x60/0x230
[ 272.258181] __se_sys_finit_module+0x27a/0x370
[ 272.262627] do_syscall_64+0x6a/0xf0
[ 272.266206] ? do_syscall_64+0x76/0xf0
[ 272.269956] ? irqentry_exit_to_user_mode+0x79/0x90
[ 272.274836] entry_SYSCALL_64_after_hwframe+0x55/0x5d
[ 272.279887] RIP: 0033:0x7b9309168d39
[ 272.283466] Code: 5b 41 5c 5d c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d af 40 0c 00 f7 d8 64 89 01 8
[ 272.302210] RSP: 002b:00007fff50f1a288 EFLAGS: 00000246 ORIG_RAX: 000
---truncated--- |
| In the Linux kernel before 5.1.17, ptrace_link in kernel/ptrace.c mishandles the recording of the credentials of a process that wants to create a ptrace relationship, which allows local users to obtain root access by leveraging certain scenarios with a parent-child process relationship, where a parent drops privileges and calls execve (potentially allowing control by an attacker). One contributing factor is an object lifetime issue (which can also cause a panic). Another contributing factor is incorrect marking of a ptrace relationship as privileged, which is exploitable through (for example) Polkit's pkexec helper with PTRACE_TRACEME. NOTE: SELinux deny_ptrace might be a usable workaround in some environments. |
